Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] I. Martel et al., “ECOS-LINCE: A High Intensity Multi-ion Superconducting Linac for Nuclear Structure and Reactions”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3301-3303. doi:10.18429/JACoW-IPAC2014-THPME036
[n] T. Lamy, “Reflections on the life of Richard Geller”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper TUIO02, pp. 179-179.
[n] W. Beeckman et al., “Magnetic Design Improvement and Construction of the Large 90o Bending Magnet of the Vertical Beam Delivery Line of CNAO”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP111, pp. 1782-1784.
[n] C. Zamantzas, B. Dehning, E. Effinger, J. Emery, and S. Jackson, “Real-Time System Supervision for the LHC Beam Loss Monitoring System at CERN”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC062, pp. 242-245.
[n] J. Tooker and G. Lawrence, “Overview of the APT Accelerator Design”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA76, pp. 3567-3569.
[n] V. Bothe, V. P. Goncharenco, O. A. Gusev, G. A. Martorossian, V. Ts Nikogossian, and K. A. Sadoyan, “The Features of Forming the Magnetic Cycle of Yerevan Synchrotron”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1435-1438.
[n] C. Pascual-Izarra et al., “Effortless Creation of Control & Data Acquisition Graphical User Interfaces with Taurus”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1138-1142. doi:10.18429/JACoW-ICALEPCS2015-THHC3O03
[n] K. Fuchsberger et al., “Determination of the Chromaticity of the TI 8 Transfer Line Based on Kick Response Measurements”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP038, pp. 3787-3789.
[n] T. Durand et al., “Study of Injection Line of the Cyclotrons C70XP of Arronax”, in Proc. HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, pp. 100-103. doi:10.18429/JACoW-HIAT2022-TUP14
[n] P. W. Schmor, R. Baartman, J. W. Carey, D. Dohan, G. Dutto, and G. H. Mackenzie, “Progress Towards Higher Intensities and Improved Beam Stability at TRIUMF”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2092-2095.
[n] W. Xu et al., “Multipacting Simulation ADN Test Results of BNL 704 MHz SRF Gun”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC111, pp. 2480-2482.
[n] J. John, J. P. Aldridge, K. R. Chapman, R. H. Davis, C. P. Robinson, and W. J. Wallace, “Modification of an Ion Source for the Production of Microampere 4He- Beams”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 82-87.
[n] F. Y. Yang, J. Dai, P. He, Z. Q. Li, Y. Ma, and P. Zhang, “Study of Surface Treatment of 1.3 GHz Single-cell Copper Cavity for Niobium Sputtering”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 605-609. doi:10.18429/JACoW-SRF2019-TUP068
[n] Y. Iwasaki, T. Kaneyasu, S. Koda, and Y. Takabayashi, “Improvements for Simple Operation at SAGA-LS Accelerator”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL023, pp. 76-78.
[n] K. J. Bertsche, “Accelerator Production Options for 99Mo”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA025, pp. 121-123.
[n] D. Wildman, “Transient Beam Loading Reduction During Multi-Batch Coalescing in the Fermilab Main Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 410-413.
[n] M. A. Clarke-Gayther, “A Two Stage Fast Beam Chopper for Next Generation High Power Proton Drivers”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS104, pp. 1786-1788.
[n] M. Kuriki, Y. Seimiya, S. Kashiwagi, T. Okugi, M. Satoh, and J. Urakawa, “An Optimization of Positron Injector of ILC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1334-1336. doi:10.18429/JACoW-IPAC2014-TUPME002
[n] L. Maunoury et al., “SPIRAL1 Charge Breeder: Performances and Status”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 35-38. doi:10.18429/JACoW-ECRIS2016-MOFO01
[n] M. A. Clarke-Gayther, “The Development of a Fast Beam Chopper for Next Generation High Power Proton Drivers”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP094, pp. 3584-3586.
[n] H. Ohgaki, Y. Iwasaki, S. Koda, K. Kudo, T. Tomimasu, and H. Toyokawa, “Design of Control System for SAGA Synchrotron Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE029, pp. 2387-2389.
[n] B. Rusnak et al., “Status of RF Superconductivity at Los Alamos National Laboratory”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93B05, pp. XX-XX.
[n] M. S. Bakeman, W. Leemans, K. Nakamura, K. E. Robinson, C. B. Schroeder, and C. T??th, “Undulator-Based Laser Wakefield Accelerator Electron Beam Diagnostic”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP074, pp. 2967-2969.
[n] M. A. Clarke-Gayther, G. M. Allen, and A. I. Borden, “Global Beam Loss Monitoring using Long Ionisation Chambers at ISIS”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1634-1637.
[n] A. Young et al., “Design of a Multi-Bunch BPM for the Next Linear Collider”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PM09, pp. XX-XX.
[n] F. Daclon and J. Miertusova, “Theoretical and Experimental Study of Sorption Processes on Non Evaporable Getters St 707”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3873-3876.
[n] K. Ohmi, “Weak-Strong Simulation of Beam-Photoelectron Instability in a Positron Storage Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5V032, pp. 1667-1669.
[n] D. B. Shwartz, I. Koop, and P. Yu. Shatunov, “Chromatic and Nonlinear Dynamics of Antiprotons Injected to Collector Ring at FAIR”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 399-401. doi:10.18429/JACoW-RUPAC2016-WEPSB017
[n] D. Wildman, “Transient Beam Loading Compensation in the Fermilab Main Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2150-2153.
[n] G. Castorina et al., “A TM01 Mode Launcher With Quadrupole Field Components Cancellation for High Brightness Applications”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3631-3633. doi:10.18429/JACoW-IPAC2018-THPAL009
[n] F. Furuta et al., “Vertical Electropolishing Studies at Cornell with KEK and Marui”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2295-2297. doi:10.18429/JACoW-IPAC2016-WEPMR016
[n] P. Oddo et al., “Combining Multiple BPM Measurements for Precession AC Dipole Bump Closure”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPBA05, pp. 892-894.
[n] R. A. Marsh, S. G. Anderson, D. J. Gibson, J. Hall, and B. Rusnak, “Fluorescence-Based Imaging Diagnostic for High Average Power Deuteron Beam”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2777-2779. doi:10.18429/JACoW-IPAC2019-WEPGW120
For LaTeX
Use Complete Form
For BibTeX
References
- I. Martel et al., “ECOS-LINCE: A High Intensity Multi-ion Superconducting Linac for Nuclear Structure and Reactions”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3301-3303.
- T. Lamy, “Reflections on the life of Richard Geller”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper TUIO02, pp. 179-179.
- W. Beeckman et al., “Magnetic Design Improvement and Construction of the Large 90o Bending Magnet of the Vertical Beam Delivery Line of CNAO”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP111, pp. 1782-1784.
- C. Zamantzas, B. Dehning, E. Effinger, J. Emery, and S. Jackson, “Real-Time System Supervision for the LHC Beam Loss Monitoring System at CERN”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC062, pp. 242-245.
- J. Tooker and G. Lawrence, “Overview of the APT Accelerator Design”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA76, pp. 3567-3569.
- V. Bothe, V. P. Goncharenco, O. A. Gusev, G. A. Martorossian, V. Ts Nikogossian, and K. A. Sadoyan, “The Features of Forming the Magnetic Cycle of Yerevan Synchrotron”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1435-1438.
- C. Pascual-Izarra et al., “Effortless Creation of Control & Data Acquisition Graphical User Interfaces with Taurus”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1138-1142.
- K. Fuchsberger et al., “Determination of the Chromaticity of the TI 8 Transfer Line Based on Kick Response Measurements”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP038, pp. 3787-3789.
- T. Durand et al., “Study of Injection Line of the Cyclotrons C70XP of Arronax”, in Proc. 15th International Conference on Heavy Ion Accelerator Technology (HIAT'22), Darmstadt, Germany, Jun.-Jul. 2022, pp. 100-103.
- P. W. Schmor, R. Baartman, J. W. Carey, D. Dohan, G. Dutto, and G. H. Mackenzie, “Progress Towards Higher Intensities and Improved Beam Stability at TRIUMF”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2092-2095.
- W. Xu et al., “Multipacting Simulation ADN Test Results of BNL 704 MHz SRF Gun”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC111, pp. 2480-2482.
- J. John, J. P. Aldridge, K. R. Chapman, R. H. Davis, C. P. Robinson, and W. J. Wallace, “Modification of an Ion Source for the Production of Microampere 4He- Beams”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 82-87.
- F. Y. Yang, J. Dai, P. He, Z. Q. Li, Y. Ma, and P. Zhang, “Study of Surface Treatment of 1.3 GHz Single-cell Copper Cavity for Niobium Sputtering”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 605-609.
- Y. Iwasaki, T. Kaneyasu, S. Koda, and Y. Takabayashi, “Improvements for Simple Operation at SAGA-LS Accelerator”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper WEPL023, pp. 76-78.
- K. J. Bertsche, “Accelerator Production Options for 99Mo”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA025, pp. 121-123.
- D. Wildman, “Transient Beam Loading Reduction During Multi-Batch Coalescing in the Fermilab Main Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 410-413.
- M. A. Clarke-Gayther, “A Two Stage Fast Beam Chopper for Next Generation High Power Proton Drivers”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS104, pp. 1786-1788.
- M. Kuriki, Y. Seimiya, S. Kashiwagi, T. Okugi, M. Satoh, and J. Urakawa, “An Optimization of Positron Injector of ILC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1334-1336.
- L. Maunoury et al., “SPIRAL1 Charge Breeder: Performances and Status”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 35-38.
- M. A. Clarke-Gayther, “The Development of a Fast Beam Chopper for Next Generation High Power Proton Drivers”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP094, pp. 3584-3586.
- H. Ohgaki, Y. Iwasaki, S. Koda, K. Kudo, T. Tomimasu, and H. Toyokawa, “Design of Control System for SAGA Synchrotron Light Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE029, pp. 2387-2389.
- B. Rusnak et al., “Status of RF Superconductivity at Los Alamos National Laboratory”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93B05, pp. XX-XX.
- M. S. Bakeman, W. Leemans, K. Nakamura, K. E. Robinson, C. B. Schroeder, and C. T??th, “Undulator-Based Laser Wakefield Accelerator Electron Beam Diagnostic”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP074, pp. 2967-2969.
- M. A. Clarke-Gayther, G. M. Allen, and A. I. Borden, “Global Beam Loss Monitoring using Long Ionisation Chambers at ISIS”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1634-1637.
- A. Young et al., “Design of a Multi-Bunch BPM for the Next Linear Collider”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PM09, pp. XX-XX.
- F. Daclon and J. Miertusova, “Theoretical and Experimental Study of Sorption Processes on Non Evaporable Getters St 707”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3873-3876.
- K. Ohmi, “Weak-Strong Simulation of Beam-Photoelectron Instability in a Positron Storage Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5V032, pp. 1667-1669.
- D. B. Shwartz, I. Koop, and P. Yu. Shatunov, “Chromatic and Nonlinear Dynamics of Antiprotons Injected to Collector Ring at FAIR”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 399-401.
- D. Wildman, “Transient Beam Loading Compensation in the Fermilab Main Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2150-2153.
- G. Castorina et al., “A TM01 Mode Launcher With Quadrupole Field Components Cancellation for High Brightness Applications”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3631-3633.
- F. Furuta et al., “Vertical Electropolishing Studies at Cornell with KEK and Marui”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2295-2297.
- P. Oddo et al., “Combining Multiple BPM Measurements for Precession AC Dipole Bump Closure”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPBA05, pp. 892-894.
- R. A. Marsh, S. G. Anderson, D. J. Gibson, J. Hall, and B. Rusnak, “Fluorescence-Based Imaging Diagnostic for High Average Power Deuteron Beam”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2777-2779.
Back to search