JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	J. Fuchs, “Enhanced proton and neutron production using the ultra-short (24 fs) and high-power (2 PW) Apollon laser facility”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEWD1, unpublished. 
[n]	C. Eckardt et al., “Implementation of a Polarized Electron Source at the S-DALINAC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC019, pp. 4083-4085. 
[n]	J. Klingmann et al., “Fabrication of DDS-3, an 11.4 GHz Damped-Detuned Structure”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP51, pp. 777-779. 
[n]	S. K. Suneet et al., “SF6 Gas Monitoring and Safety for DC Electron Beam Accelerator at EBC, Kharghar, Navi Mumbai”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP007, pp. 61-63. 
[n]	F. Stulle et al., “Beam Loss and Average Beam Current Measurements Using a CWCT”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 882-885. doi:10.18429/JACoW-LINAC2018-THPO086
[n]	S. R. Ghodke et al., “Cooling of High Pressure Insulating Gas for 3 MeV DC Accelerator: an Alternate Approach”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP003, pp. 839-842. 
[n]	K. C. Mittal et al., “High Power Electron Accelerator Programme at BARC”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP005, pp. 58-60. 
[n]	F. Voelker, G. Lambertson, and R. Rimmer, “Higher Order Mode Damping in a Pill Box Cavity”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 687-690. 
[n]	J. C. Huang, C.-H. Chang, C.-S. Hwang, C. Y. Kuo, F.-Y. Lin, and C.-S. Yang, “Effectiveness of a Shielding Cabinet on the Storage-Ring Septum Magnet of Taiwan Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC033, pp. 1793-1795. 
[n]	S. Karsch, “Science and Techniques of Ultra-Fast Electron and Photon Sources”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR3RBI02, pp. 4290-4290. 
[n]	T. Rizawa and R. Pendleton, “Broadband Coax-Waveguide Transitions”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR16, pp. 1824-1826. 
[n]	S. Chunjarean, C.-S. Hwang, J. C. Jan, and H. Wiedemann, “Field Error Correction for a Superconducting Undulator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC168, pp. 3290-3292. 
[n]	T. Kubo, Y. Ajima, H. Inoue, K. Umemori, Y. Watanabe, and M. Yamanaka, “In-house Production of a Large-Grain Single-Cell Cavity at Cavity Fabrication Facility and Results of Performance Tests”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2519-2521. doi:10.18429/JACoW-IPAC2014-WEPRI022
[n]	T. Kubo, K. Endo, H. Fukuma, A. Kabe, and T. Ozaki, “Steering Magnet Power Supply Control System for the TRISTAN AR”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3772-3775. 
[n]	D. C. Zhu, J. S. Cao, Y. F. Sui, J. H. Yue, and J. Chen, “Beam Profile Measurement Using Kirkpatrick Baez Mirror Optics at Shanghai Synchrotron Radiation Facility”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 167-170. doi:10.18429/JACoW-IPAC2016-MOPMB036
[n]	I. Hofmann, A. Orzhekhovskaya, S. Yaramyshev, I. Alber, K. Harres, and M. Roth, “Laser Accelerated Ions and Their Potential Use for Therapy Accelerators”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper FR-06, pp. 213-217. 
[n]	A. F. D. Morgan, M. G. Abbott, and G. Rehm, “First Experiences with the Longitudinal Feedback System at Diamond Light Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1992-1995. doi:10.18429/JACoW-IPAC2017-TUPIK114
[n]	D. Gorelov, T. Grimm, W. Hartung, F. Marti, X. Wu, and R. York, “Analysis of a Multi-Spoke Option for the RIA Driver Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB056, pp. 2849-2851. 
[n]	M. Roth et al., “Breaking the 70 MeV Proton Energy Threshold in Laser Proton Acceleration and Guiding Beams to Applications”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1886-1889. doi:10.18429/JACoW-IPAC2014-WEXB01
[n]	L. Somaschini et al., “Tuner System Simulation and Tests for the 201-MHz MICE Cavity”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3927-3929. doi:10.18429/JACoW-IPAC2014-THPRI070
[n]	G. M. Kazakevich et al., “A Two-stage Injection-locked Magnetron for Accelerators with Superconducting Cavities”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC059, pp. 2348-2350. 
[n]	J. Lewellen et al., “Report From Working Group 1 - Injectors, Guns, & Cathodes - RF and SRF Guns”, in Proc. ERL'09, Ithaca, NY, USA, Jun. 2009, paper WG103, pp. 24-36. 
[n]	R. Stiening, “The Status of the SLAC Linear Collider Project”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 1976-1978. 
[n]	S. Busold et al., “The LIGHT Beamline at GSI: Shaping Intense MeV Proton Bunches from a Compact Laser-driven Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1419-1421. doi:10.18429/JACoW-IPAC2014-TUPME030
[n]	M. Schalwat et al., “Exchange and Repair of Titanium Service Pipes for the EXFEL Series Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB025, pp. 1122-1126. 
[n]	D. L. Bowring et al., “RF Breakdown of 805 MHz Cavities in Strong Magnetic Fields”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 53-56. doi:10.18429/JACoW-IPAC2015-MOAD2
[n]	T. C. Shen et al., “Exploring No-SQL Alternatives for ALMA Monitoring System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper WECOBA06, pp. 1012-1015. 
[n]	T. Grimm, W. Hartung, and S. E. Musser, “X-Ray Tomography of Superconducting RF Cavities”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB068, pp. 1356-1358. 
[n]	R. Jobe, J. Clendenin, H. Schwarz, J. Seeman, J. Sheppard, and R. Stiening, “The RF Phase System of the SLC”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-26, pp. 592-594. 
[n]	A. M. Hutton et al., “Status of the SLC Damping Rings”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1659-1662. 
[n]	T. Grimm, T. R. Bieler, C. Compton, and H. Jiang, “Mechanical Properties, Microstructure, and Texture of Electron Beam Butt Welds in High Purity Niobium”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB069, pp. 1359-1361. 
[n]	L. W. Lai et al., “BATCH APPLICATIONS OF DIGITAL BPM PROCESSORS FROM THE SINAP”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 658-660. doi:10.18429/JACoW-IBIC2016-WEPG17
[n]	J. W. Wang et al., “RF System for the NLCTA”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P031, pp. 3042-3044. 
[n]	A. F. D. Morgan and G. Rehm, “Quantifying Dissipated Power From Wake Field Losses in Diagnostics Structures”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF23, pp. 259-262. 
[n]	F. Voelker and G. Lambertson, “Beam Impedance of Ferrite Kicker Magnets”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 851-854. 
[n]	T. Bahlo et al., “Phase and Energy Stabilization System at the S-Dalinac”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 638-641. doi:10.18429/JACoW-IBIC2016-WEPG10
[n]	M. Chung et al., “Instrumentation for Characterizing 201-MHz MICE Cavity at Fermilab”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3930-3932. doi:10.18429/JACoW-IPAC2014-THPRI071
[n]	E. Koukovini-Platia, R. Bartolini, A. F. D. Morgan, and G. Rehm, “Study of Single Bunch Instabilities with Transverse Feedback at Diamond”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4489-4492. doi:10.18429/JACoW-IPAC2017-THPVA029
[n]	M. Prieto, J. J. Casas, C. Colldelram, and Y. Nikitin, “ALBA Synchrotron Light Source Liquefaction Helium Plant”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 102-104. doi:10.18429/JACoW-MEDSI2018-TUPH30
[n]	A. V. Kochemirovskiy et al., “Breakdown Characterization in 805 MHz Pillbox-like Cavity in Strong Magnetic Fields”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3335-3337. doi:10.18429/JACoW-IPAC2015-WEPTY030
[n]	K. Bane, C. Adolphsen, T. L. Lavine, M. Ross, J. Seeman, and K. Thompson, “Measurements of Longitudinal Phase Space in the SLC Linac”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1762-1765. 
[n]	C.-S. Hwang et al., “Status of Magnet Design for the Accelerator Lattice of the TPS Project”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP028, pp. 196-198. 
[n]	X. Yang et al., “A Novel Nondestructive Diagnostic Method for MeV Ultrafast Electron Diffraction”, in Proc. IPAC'20, Caen, France, May 2020, pp. 67. doi:10.18429/JACoW-IPAC2020-WEVIR16
[n]	D. Briggs et al., “Prompt Bunch by Bunch Synchrotron Oscillation Detection Via a Fast Phase Measurement”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1404-1407. 
[n]	R. L. Hulsart, P. Cerniglia, N. M. Day, R. J. Michnoff, and Z. Sorrell, “A Versatile BPM Signal Processing System Based on the Xilinx Zynq SoC”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 646-649. doi:10.18429/JACoW-IBIC2016-WEPG12
[n]	M. H. R. Donald, P. L. Morton, and H. Wiedemann, “Chromaticity Correction in Large Storage Rings”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1200-1203. 
[n]	K. C. Mittal et al., “Development of 3 MeV, 30 kW DC Electron Accelerator at EBC, Kharghar”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA043, pp. 682-684. 
[n]	T. Grimm, W. Hartung, M. Johnson, P. Kneisel, L. Turlington, and R. York, “Cryomodule Design for the Rare Isotope Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB066, pp. 1350-1352. 
[n]	D. Briggs et al., “Computer Modelling of Bunch-by-Bunch Feedback for the SLAC B-Factory Design”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1407-1410. 
[n]	V. Sharma, S. Acharya, and K. C. Mittal, “Distributed Control System for an Industrial Electron Accelerator”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP049, pp. XX-XX. 
[n]	K. V. Nagesh et al., “Development of a 200keV Linear Induction Accelerator”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA064, pp. 720-722. 
[n]	C. Eckardt et al., “The S-DALINAC Polarized Injector SPIN - Performance and Results”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP019, pp. 853-855. 
[n]	P. A. Lin, K. H. Hsu, C. K. Kuan, C.-S. Lin, H. Y. Lin, and I. C. Sheng, “Manufacturing and Inspecting Supporting Tables for Front End in Taiwan Photon Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 4031-4033. doi:10.18429/JACoW-IPAC2014-THPRI108
[n]	S. Hunziker et al., “Reference Distribution and Synchronization System for SwissFEL: Concept and First Results”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOCZB2, pp. 29-33. 
[n]	A. P. Zhukov, “SNS RFQ Voltage Measurements Using X-Ray Spectrometer”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 154-156. doi:10.18429/JACoW-IBIC2016-MOPG44
[n]	H. Winick et al., “An All Wiggler and Undulator Synchrotron Radiation Source”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3097-3100. 
[n]	A. F. D. Morgan and G. Rehm, “Initial Work on the Design of a Longitudinal Bunch-by-Bunch Feedback Kicker at Diamond”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 197-201. doi:10.18429/JACoW-IBIC2015-MOPB064
[n]	V. Sharma, S. Acharya, S. Gond, K. C. Mittal, and R. N. Rajan, “PLC Controlled Search & Secure Safety Interlock System for Accelerator”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD03, pp. 142-143. 
[n]	H. Fukuma, K. Endo, A. Kabe, Ta. Kubo, and T. Ozaki, “Power Supply Control for the TRISTAN Main Ring Accumulation Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1529-1532. 
[n]	M. Cornacchia, R. Lauckner, W. Mills, R. Stiening, E. J. N. Wilson, and G. von Holtey, “Non Linear Fields in the SPS and Their Compensation”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1482-1485. 
[n]	R. Rimmer and H. Schwarz, “RF System Design for the PEP-II B Factory”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1882-1885. 
[n]	C. H. Kuo, P. C. Chiu, K. T. Hsu, and K. H. Hu, “Orbit Feedforward and Feedback Applications in the Taiwan Light Source”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 623-625. doi:10.18429/JACoW-IBIC2016-WEPG06
[n]	Y. Torun et al., “Installation and Commissioning of the MICE RF Module Prototype”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3395-3397. doi:10.18429/JACoW-IPAC2015-WEPTY055
[n]	D. C. Zhu, J. S. Cao, Y. F. Sui, and J. H. Yue, “Beam Size Measurement and PSF Evaluate of KB Mirror Monitor at SSRF”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2151-2154. doi:10.18429/JACoW-IPAC2018-WEPAL005
[n]	C. E. Adolphsen et al., “Measurement of Wakefield Suppression in a Detuned X-Band Accelerator Structure (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-52, pp. 481-483. 
[n]	G. Hochschild et al., “Operation Experiences with the Test Section of a Superconducting Heavy-Ion Post Accelerator”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1150-1153. 
[n]	P. Coleman et al., “Test Results on the SSC Low Energy Booster RF Cavity”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2104-2107. 
[n]	K. L. Small et al., “A Comparative Study of Biological Effects of Electrons and Co-60 Gamma Rays on pBR322 Plasmid DNA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3533-3536. doi:10.18429/JACoW-IPAC2019-THPMP041
[n]	J. N. Corlett, J. Johnson, G. Lambertson, and F. Voelker, “Longitudinal and Transverse Feedback Kickers for the ALS”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1625-1628. 
[n]	V. Sharma, S. Acharya, and K. C. Mittal, “Machine Throughput Improvement Achieved Using Innovative Control Technique”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD04, pp. 144-144. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search