JaCoW Logo

Reference Search

Favourites


For Word

[n]	G. Stern et al., “Experiments of Laser Pointing Stability in Air and in Vacuum to Validate Micrometric Positioning Sensor”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1793-1795. doi:10.18429/JACoW-IPAC2014-TUPRI094
[n]	M. W. Bruker, K. Aulenbacher, J. Dietrich, S. Friederich, A. Hofmann, and T. Weilbach, “Status of the HESR Electron Cooler Test Set-up”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA021, pp. 115-117. 
[n]	M. La China, J. Garcia Perez, G. Gubello, C. Hauviller, W. Scandale, and E. Todesco, “Geometrical Position of the Large Hadron Collider Main Dipole inside the Cryostat”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE027, pp. 2409-2411. 
[n]	P. Kuske, M. Abo-Bakr, J. Feikes, K. Holldack, and G. Wuestefeld, “Coherent Emission of Synchrotron Radiation and Longitudinal Instabilities”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB006, pp. 3023-3025. 
[n]	H. Ohkuma, “Top-Up Operation in Light Sources”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOZCG01, pp. 36-40. 
[n]	M. Ruprecht et al., “Influence of Transient Beam Loading on the Longitudinal Beam Dynamics at BESSY VSR”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 141-143. doi:10.18429/JACoW-IPAC2015-MOPWA022
[n]	F. Hug and R. G. Heine, “Injector Linac Stability Requirements for High Precision Experiments at MESA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 876-879. doi:10.18429/JACoW-IPAC2017-MOPVA014
[n]	G. G. Gurov and A. Yu. Malovitsky, “Effect of Mains Ripple Harmonics on Longitudinal Emittance of Bunches in the UNK”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 968-971. 
[n]	R. G. Heine, P. Hartmann, and T. Weis, “Characterisation of the EU-HOM-damped Normal Conducting 500 MHz Cavity from the Beam Power Spectrum at DELTA”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH035, pp. 2856-2858. 
[n]	A. Ushakov, S. Riemann, and A. Schaelicke, “Polarized Positron Production and Tracking at the ILC Positron Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN017, pp. 2742-2744. 
[n]	M. Wiebel, “An Extensible Equipment Control Library for Hardware Interfacing in the FAIR Control System”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO008, pp. 49-51. 
[n]	R. Mueller et al., “Pseudo Single Bunch Qualities Added to Short Pulse Operation of BESSY II”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2574-2577. doi:10.18429/JACoW-IPAC2017-WEPAB007
[n]	A. Yu. Antonov and M. I. Varajun, “The Electron Trajectories Construction in the System With a Real" Geometry of the Field Cathode"”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 339-341. doi:10.18429/JACoW-RUPAC2016-TUPSA063
[n]	D. Einfeld, “Progress of ALBA”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC009, pp. 2001-2003. 
[n]	R. G. Heine, “Current Status of the MESA Project”, in Proc. ERL'15, Stony Brook, NY, USA, Jun. 2015, pp. 58-62. doi:10.18429/JACoW-ERL2015-WEIBLH1049
[n]	A. E. Dabrowski et al., “Non-Destructive Single Shot Bunch Length Measurements for the CLIC Test Facility 3”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS045, pp. 4069-4071. 
[n]	K. Kasprzak and M. Wiencek, “Fundamental Mode Spectrum Measurement of RF Cavities with RLC Equivalent Circuit”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP093, pp. 1141-1143. 
[n]	M. Busch et al., “Status of the 325 MHz SC CH-Cavity at IAP Frankfurt”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC082, pp. 265-267. 
[n]	M. Coccoli, M. Buzio, and J. Garcia Perez, “LHC Dipole Axis, Spool Piece Alignment and Field Angle in Warm and Cold Conditions”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF012, pp. 1618-1620. 
[n]	J. Kettler, P. Hartmann, R. G. Heine, and T. Weis, “Fast Beam Dynamics Investigation Based on an ADC Filling Pattern Measurement”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH018, pp. 1034-1036. 
[n]	H. Mainaud Durand et al., “HL-LHC Alignment Requirements and Associated Solutions”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1893-1896. doi:10.18429/JACoW-IPAC2017-TUPIK085
[n]	T. Stengler et al., “Modified ELBE Type Cryomodules for the Mainz Energy-Recovering Superconducting Accelerator MESA”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB116, pp. 1413-1416. 
[n]	F. Schlander et al., “A New Cleanroom With Facilities for Cleaning and Assembly of Superconducting Cavities at Helmholtz-Institut Mainz”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB015, pp. 575-577. 
[n]	P. Goslawski, A. Jankowiak, F. Kramer, M. Ries, M. Ruprecht, and G. Wuestefeld, “Transverse Resonance Island Buckets as Bunch Separation Scheme”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3059-3062. doi:10.18429/JACoW-IPAC2017-WEPIK057
[n]	A. Jankowiak et al., “The First Two Years of Operation of the 1.5 GeV CW Electron Accelerator MAMI C”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP111, pp. 2772-2774. 
[n]	H. Reymond et al., “Magnetic Measurement Systems for the LHC Dipole Assembly Firms”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF019, pp. 1636-1638. 
[n]	L. Tosi, B. Diviacco, R. P. Walker, G. Wuestefeld, M. Scheer, and S. Werin, “Simulations of Non-Linear Beam Dynamics Effects Due to an Electromagnetic Elliptical Wiggler”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9V013, pp. 1520-1522. 
[n]	R. G. Heine, “Testing of the Milliampere Booster Prototype Cavity”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2693-2696. doi:10.18429/JACoW-IPAC2021-WEPAB041

For LaTeX

Use Complete Form

For BibTeX

References

Back to search