Favourites
For Word
[n] M. Kreider, “The FAIR Timing Master: A Discussion of Performance Requirements and Architectures for a High-precision Timing System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THCHMUST06, pp. 1256-1259.
[n] H. D. Glass et al., “Permanent Dipole Magnets for the 8 GeV Transfer Line at FNAL”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P012, pp. 3257-3259.
[n] R. D. Scarpetti et al., “Status of DARHT 2nd Axis Accelerator at the Los Alamos National Laboratory”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUXC01, pp. 831-835.
[n] A. Rossi, I. Collins, J. R. Knaster, P. Lepeule, and R. Veness, “Vacuum Calculations for the LHC Experimental Beam Chambers”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH129, pp. 3153-3155.
[n] G. V. Dolbilov et al., “Status of the Test Facility for Studies FEL Bunching Technique for CLIC Driving Beam”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP057G, pp. 730-732.
[n] G. Rouse, R. Siemann, and M. Tigner, “Beam Modulator for an Electron Linac”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1473-1476.
[n] P. Ausset, L. Badano, J. Bosser, P. A. Chamouard, P. Knaus, and S. Rossi, “A Betatron Core for Optimised Slow Extraction in a Proton/Ion Medical Synchrotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP10H, pp. 2368-2370.
[n] S. K. Esin et al., “Linear Accelerator for Production of Radioactive Beams”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-70, pp. 808-810.
[n] Y. V. Altukhov, E. Kashtanov, S. Kozub, and L. Tkachenko, “Results of Mechanical Analysis of Wide-Aperture Quadrupole Nodes for HED@FAIR Experiments”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 360-362. doi:10.18429/JACoW-RUPAC2018-WEPSB41
[n] T. J. Jones et al., “Development of a Novel Supporting System for High Luminosity LHC SRF Crab Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 304-308. doi:10.18429/JACoW-SRF2017-MOPB104
[n] M. Vogel, X. Jiang, P. Murcek, J. Schaber, C. Wang, and R. Xiang, “Initial Study of GaN Thin Films for Photocathodes Prepared by Magnetron Sputtering on Copper Substrates”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2850-2852. doi:10.18429/JACoW-IPAC2021-WEPAB109
[n] H. Churn, L. Jones, and T. Noakes, “Mean Transverse Energy and Degradation Measurements on a Caesium Telluride Photocathode”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1404-1407. doi:10.18429/JACoW-IPAC2023-TUPA030
[n] Y. Gao, T. G. Robertazzi, K. A. Brown, J. Morris, and R. H. Olsen, “A New Simulation Architecture for Improving Software Reliability in Collider-Accelerator Control Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1261-1265. doi:10.18429/JACoW-ICALEPCS2017-THMPL03
[n] A. I. Kvasha and V. L. Serov, “Powerful RF Triode as Anode Modulator Vacuum Tube (Part Two)”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 378-381. doi:10.18429/JACoW-RUPAC2018-WEPSB50
[n] R. C. Wolgast, “Vacuum Cryopumping a Heavy Ion Source in a High Voltage Terminal”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 699-703.
[n] M. Hara, T. Fujisawa, and K. Ogiwara, “The RF System for the IPCR SSC”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-11, pp. 411-413.
[n] M. Takao, H. Ego, Y. Kawashima, Y. Ohashi, T. Ohshima, and H. Saeki, “Observation of Ion Effects at the SPring-8 Storage Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI037, pp. 1562-1564.
[n] K. Ammigan et al., “Experimental Results of Beryllium Exposed to Intense High Energy Proton Beam Pulses”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 102-105. doi:10.18429/JACoW-NAPAC2016-MOPOB14
[n] L. Liu et al., “Status of SIRIUS operation with users”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2586-2589. doi:10.18429/JACoW-IPAC2023-WEOGA2
[n] Ch. E. Wang et al., “A Decade of Operational Experience with the 500 MHz RF System at SRRC and the Next Era of Superconducting RF”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI008, pp. 769-771.
[n] M. Schenk, A. Grudiev, K. S. B. Li, and K. Papke, “Use of RF Quadrupole Structures to Enhance Stability in Accelerator Rings”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 505-510. doi:10.18429/JACoW-HB2016-THPM7X01
[n] A. W. Chao, M. A. Furman, and K. Y. Ng, “A Possible Symplectic Coherent Beam-Beam Model”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 684-687.
[n] A. G. Alexeev et al., “Methodical Issues of the Use of Detectors for Dosimetry in Carbon Nuclei Beams at the U-70 Accelerator”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 394-396. doi:10.18429/JACoW-RUPAC2018-WEPSB56
[n] V. Chouhan, T. J. Ring, E. A. S. Viklund, and G. Wu, “Electropolishing Study on Nitrogen-Doped Niobium Surface”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 641-645. doi:10.18429/JACoW-SRF2023-WEIXA05
[n] K. Hayakawa, N. Nakamura, K. Sato, and K. Tsukada, “Effects of Radial Support Stems on the Disk-and-Washer Structure”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B16, pp. 80-80.
[n] F. M. Bieniosek et al., “Ion Sources and Injectors for HIF Induction Linacs”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOD05, pp. 214-216.
[n] M. Fradj, R. Christmann, M. Hartung, and P. Strehl, “A New Design of Profile Grid Electronics with High Performance”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-22, pp. 93-95.
[n] C. C. Kuo et al., “Coupling Correction Study at NSRRC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB028, pp. 890-892.
[n] Kh. M. Gad et al., “Magnet Design of 70 MeV Separate Sector Cyclotron (KoRIA)”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP033, pp. 120-122.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Kreider, “The FAIR Timing Master: A Discussion of Performance Requirements and Architectures for a High-precision Timing System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THCHMUST06, pp. 1256-1259.
- H. D. Glass et al., “Permanent Dipole Magnets for the 8 GeV Transfer Line at FNAL”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P012, pp. 3257-3259.
- R. D. Scarpetti et al., “Status of DARHT 2nd Axis Accelerator at the Los Alamos National Laboratory”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUXC01, pp. 831-835.
- A. Rossi, I. Collins, J. R. Knaster, P. Lepeule, and R. Veness, “Vacuum Calculations for the LHC Experimental Beam Chambers”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH129, pp. 3153-3155.
- G. V. Dolbilov et al., “Status of the Test Facility for Studies FEL Bunching Technique for CLIC Driving Beam”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP057G, pp. 730-732.
- G. Rouse, R. Siemann, and M. Tigner, “Beam Modulator for an Electron Linac”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1473-1476.
- P. Ausset, L. Badano, J. Bosser, P. A. Chamouard, P. Knaus, and S. Rossi, “A Betatron Core for Optimised Slow Extraction in a Proton/Ion Medical Synchrotron”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP10H, pp. 2368-2370.
- S. K. Esin et al., “Linear Accelerator for Production of Radioactive Beams”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-70, pp. 808-810.
- Y. V. Altukhov, E. Kashtanov, S. Kozub, and L. Tkachenko, “Results of Mechanical Analysis of Wide-Aperture Quadrupole Nodes for HED@FAIR Experiments”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 360-362.
- T. J. Jones et al., “Development of a Novel Supporting System for High Luminosity LHC SRF Crab Cavities”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 304-308.
- M. Vogel, X. Jiang, P. Murcek, J. Schaber, C. Wang, and R. Xiang, “Initial Study of GaN Thin Films for Photocathodes Prepared by Magnetron Sputtering on Copper Substrates”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2850-2852.
- H. Churn, L. Jones, and T. Noakes, “Mean Transverse Energy and Degradation Measurements on a Caesium Telluride Photocathode”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA030, pp. 1404-1407.
- Y. Gao, T. G. Robertazzi, K. A. Brown, J. Morris, and R. H. Olsen, “A New Simulation Architecture for Improving Software Reliability in Collider-Accelerator Control Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1261-1265.
- A. I. Kvasha and V. L. Serov, “Powerful RF Triode as Anode Modulator Vacuum Tube (Part Two)”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 378-381.
- R. C. Wolgast, “Vacuum Cryopumping a Heavy Ion Source in a High Voltage Terminal”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 699-703.
- M. Hara, T. Fujisawa, and K. Ogiwara, “The RF System for the IPCR SSC”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-11, pp. 411-413.
- M. Takao, H. Ego, Y. Kawashima, Y. Ohashi, T. Ohshima, and H. Saeki, “Observation of Ion Effects at the SPring-8 Storage Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI037, pp. 1562-1564.
- K. Ammigan et al., “Experimental Results of Beryllium Exposed to Intense High Energy Proton Beam Pulses”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 102-105.
- L. Liu et al., “Status of SIRIUS operation with users”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEOGA2, pp. 2586-2589.
- Ch. E. Wang et al., “A Decade of Operational Experience with the 500 MHz RF System at SRRC and the Next Era of Superconducting RF”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI008, pp. 769-771.
- M. Schenk, A. Grudiev, K. S. B. Li, and K. Papke, “Use of RF Quadrupole Structures to Enhance Stability in Accelerator Rings”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 505-510.
- A. W. Chao, M. A. Furman, and K. Y. Ng, “A Possible Symplectic Coherent Beam-Beam Model”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 684-687.
- A. G. Alexeev et al., “Methodical Issues of the Use of Detectors for Dosimetry in Carbon Nuclei Beams at the U-70 Accelerator”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 394-396.
- V. Chouhan, T. J. Ring, E. A. S. Viklund, and G. Wu, “Electropolishing Study on Nitrogen-Doped Niobium Surface”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper WEIXA05, pp. 641-645.
- K. Hayakawa, N. Nakamura, K. Sato, and K. Tsukada, “Effects of Radial Support Stems on the Disk-and-Washer Structure”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B16, pp. 80-80.
- F. M. Bieniosek et al., “Ion Sources and Injectors for HIF Induction Linacs”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOD05, pp. 214-216.
- M. Fradj, R. Christmann, M. Hartung, and P. Strehl, “A New Design of Profile Grid Electronics with High Performance”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-22, pp. 93-95.
- C. C. Kuo et al., “Coupling Correction Study at NSRRC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB028, pp. 890-892.
- Kh. M. Gad et al., “Magnet Design of 70 MeV Separate Sector Cyclotron (KoRIA)”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP033, pp. 120-122.
Back to search