Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. Beilenhoff, M. Droba, H. L. Hartnagel, and U. Ratzinger, “180 Degree Bending Systems for High Current Heavy Ion Linacs”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP4B07, pp. 1483-1485.
[n] Th. Weiler, R. W. Assmann, C. Bracco, V. Previtali, and S. Redaelli, “Beam Cleaning and Beam Loss Control”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGD08, pp. 359-362.
[n] S. De Silva, “Testing of two-cell RF-dipole crab cavity”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPS35, unpublished.
[n] V. Galdi, S. Petracca, and I. M. Pinto, “Hybrid Computation of Normal Mode Tune Shifts in Rounded-Rectangular Pipes”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA128, pp. 2882-2884.
[n] M. Pham Tu, K. Mbaye, L. Wartski, and J. Halbritter, “Niobium Nitride Coated Superconducting Cavities”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87F03, pp. XX-XX.
[n] V. Zorin, I. Izotov, and V. Skalyga, “Optimization of Gasdynamic ECR Ion Sources”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-19, pp. 114-114.
[n] A. Madur et al., “Troubleshooting Status for the ALS In-Vacuum Insertion Device”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP087, pp. 333-335.
[n] A. Kurup et al., “Large Emittance Beam Measurements for COMET Phase-I”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA075, pp. 2684-2686.
[n] M. K. Fukuda et al., “Development and Upgrade Plan of an X-ray Source Based on Laser Compton Scattering in Laser Undulator Compact X-ray Source(LUCX)”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1867-1869. doi:10.18429/JACoW-IPAC2016-TUPOW046
[n] Y.-E. S. Sun, K.-J. Kim, P. Piot, J. G. Power, and M. M. Rihaoui, “Design Study of a Transverse-to-Longitudinal Emittance Exchange Proof-of-principle Experiment”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN094, pp. 3441-3443.
[n] L. W. Lai et al., “Beam Instrumentation System for Shanghai Soft X-ray FEL Test Facility”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 17-20. doi:10.18429/JACoW-IBIC2020-MOAO05
[n] A. Sokolovsky, “A New High Duty Cycle High Current 600 MeV Electron-Positron Linear Accelerator of Saclay”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper VIII-05, pp. 417-425.
[n] R. C. Webber and G. Apollinari, “Overview and Status Update of the Fermilab HINS Linac R&D Program”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP058, pp. 4902-4904.
[n] L.-H. Yu and B. Nash, “Linear Algebraic Method for Non-Linear Map Analysis”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP067, pp. 3862-3864.
[n] J. G. Power et al., “Pepper-pot Based Emittance Measurements of the AWA Photoinjector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN117, pp. 4393-4395.
[n] F. Xu et al., “Hydrogen Cryosorption on Multi Walled Carbon Nanotubes”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD045, pp. 2515-2517.
[n] K. R. Kim et al., “Proton Beam Energy Measurement Using Semiconductor Detectors at the 45MeV Test Beam Line of PEFP”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN055, pp. 4126-4128.
[n] K. Hanke et al., “Status and Plans for the Upgrade of the CERN PS Booster”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3905-3907. doi:10.18429/JACoW-IPAC2015-THPF090
[n] H. Baumgartner, “The Cyclotron Kids' 2 MeV Proton Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WE1PB05, pp. 302-304.
[n] C. Boccard et al., “Tune Measurements in the SPS as Multicycling Machine”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP020L, pp. 1600-1602.
[n] G. Skripka, ?à. Andersson, P. F. Tavares, F. J. Cullinan, and R. Nagaoka, “Impedance Characterization and Collective Effects in the MAX IV 3 GeV Ring”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 843-846. doi:10.18429/JACoW-NAPAC2016-WEA3CO04
[n] D. Barni, A. Bosotti, G. Ciovati, C. Pagani, and P. Pierini, “SC Cavity Design for the 700 MHz TRASCO Linac”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP7B05, pp. 2019-2021.
[n] F. Hu et al., “Development of an X-band RF gun with four-feed coupler”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1280-1283. doi:10.18429/JACoW-IPAC2023-MOPM137
[n] R. L. Geng, S. Belomestnykh, H. Padamsee, P. Goudket, D. M. Dykes, and R. G. Carter, “Dynamics of Multipacting in Rectangular Coupler Waveguides and Suppression Methods”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP24, pp. 675-678.
[n] I. Izotov, V. Sidorov, V. Skalyga, and V. Zorin, “Preglow Phenomenon Origins and its Scaling for Ecris”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper TUCOBK01, pp. 87-89.
[n] J. Bahng, E.-S. Kim, and B. H. Choi, “High-current RFQ Design Study on RAON”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 990-993. doi:10.18429/JACoW-IPAC2015-MOPTY025
[n] F. W. Jones, W. Herr, and T. Pieloni, “Self-Consistent Parallel Multi Bunch Beam-Beam Simulation Using a Grid-Multipole Method”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP074, pp. 4482-4484.
[n] A. Valishev, G. Annala, V. A. Lebedev, and R. S. Moore, “Correction of Second Order Chromaticity at Tevatron”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS015, pp. 3922-3924.
[n] A. Dubrovskiy, “Control and Acquisition Software Complex for TBTS Experiments”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL020, pp. 168-170.
[n] J. H. wu, Q. Li, and W. Pan, “Temperature Precise Control in a Large Scale Helium Refrigerator”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC116, pp. 1331-1333.
[n] Y. Wei et al., “Design of a Passive Superconducting Harmonic Cavity for HALF Storage Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1378-1380. doi:10.18429/JACoW-IPAC2022-TUPOTK065
[n] H. Saito et al., “Characteristics of Polarized Coherent Radiation in Thz Region From a Crossed-Undulator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1769-1771. doi:10.18429/JACoW-IPAC2019-TUPRB038
[n] S. Walston et al., “Resolution of a High Performance Cavity Beam Position Monitor System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS049, pp. 4090-4092.
[n] P. H. Williams et al., “Developments in the CLARA FEL Test Facility Accelerator Design and Simulations”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP091, pp. 589-592.
[n] H. Miyauchi, S. Asaoka, and T. Tahara, “Beamline Front Ends at the 2.5-GeV Photon Factory Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 315-317. doi:10.18429/JACoW-MEDSI2016-WEPE03
[n] E. M?®tral, G. Arduini, F. Arnold Malandain, W. H?Âfle, and D. Manglunki, “Controlled Transverse Emittance Blow-Up in the CERN SPS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP073, pp. 3871-3873.
[n] R. Corsini et al., “Fast Vertical Beam Instability in the CTF3 Combiner Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP011, pp. 574-576.
[n] S. P. Antipov et al., “Wakefield Breakdown Test of a Diamond-Loaded Accelerating Structure”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THOBN6, pp. 2074-2076.
[n] M. Hager and M. Regodic, “A Modular Software Architecture for Applications that Support Accelerator Commissioning at MedAustron”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 938-941. doi:10.18429/JACoW-ICALEPCS2015-WEPGF101
[n] A. V. Smirnov et al., “Necessary Condition for Beam Ordering”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper TUA1C03, pp. 87-90.
[n] P. L. Fan, X. He, J. Pang, and L. Yang, “The Beam Dynamics Simulation of an L-band Electron Gun using Genetic Algorithm”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 47-48. doi:10.18429/JACoW-SAP2017-MOPH10
[n] Z. J. Lu et al., “Design Studies of Output Window for CEPC Klystron”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 911-913. doi:10.18429/JACoW-LINAC2018-THPO102
[n] B. Buonomo, C. Di Giulio, and L. Foggetta, “The Frascati DAFNE LINAC modulator upgrade”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 862-865. doi:10.18429/JACoW-IPAC2023-MOPL131
[n] Y.-C. Chae, L. Emery, A. H. Lumpkin, J. Song, and B. X. Yang, “Measurement of the Longitudinal Microwave Instability in the APS Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH068, pp. 1817-1819.
[n] T. O. Raubenheimer, W. Decking, L. Giannessi, and H.-S. Kang, “Summary Report: Linac-Based Light Sources”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 199-201. doi:10.18429/JACoW-FLS2018-FRA1PL01
[n] A. M. Rowe, A. Grassellino, T. D. Hall, M. E. Inman, S. T. Snyder, and E. J. Taylor, “Bipolar EP: Electropolishing without Fluorine in a Water Based Electrolyte”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUIOC02, pp. 404-409.
[n] J. R. Hunt, R. Bruce, F. Carra, F. Cerutti, J. Guardia, and J. Molson, “Collimation Strategies for Secondary Beams in FCC-hh Ion-Ion Operation”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2652-2655. doi:10.18429/JACoW-IPAC2021-WEPAB025
[n] P. He et al., “Preliminary Design of HEPS Storge Ring Vacuum Chambers and Components”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 52-55. doi:10.18429/JACoW-FLS2018-TUP2WD04
[n] I. E. Campisi and Z. D. Farkas, “The Pulsed RF Superconductivity Program at SLAC”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-7, pp. XX-XX.
[n] L. Shang, Y. Lu, F. Shang, and Y. Y. Wang, “The New Injection System of the HLS II”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA013, pp. 687-689.
[n] S. Venkatesan et al., “Engineering Challenges in BioSAXS for Australian Synchrotron”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 224. doi:10.18429/JACoW-MEDSI2020-WEOB01
[n] A. D. Palczewski et al., “Rework Recipe Development, Analysis and Results of Select 9-Cell Cavities for LCLS-II”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3968-3971. doi:10.18429/JACoW-IPAC2018-THPAL140
[n] F. Tamura, H. Yoshikawa, J. Chiba, M. Yoshii, M. Tanaka, and S. Shimazaki, “J-PARC Timing System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TU115, pp. XX-XX.
[n] J. Bahng et al., “Development of High Power RF Amplifier System for the KBSI RFQ”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4257-4259. doi:10.18429/JACoW-IPAC2017-THPIK072
[n] A. D. Yeremian, V. A. Dolgashev, J. Neilson, and S. G. Tantawi, “A Dual-mode Accelerating Cavity to Test RF Breakdown Dependence on RF Magnetic Fields”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC073, pp. 247-249.
For LaTeX
Use Complete Form
For BibTeX
References
- K. Beilenhoff, M. Droba, H. L. Hartnagel, and U. Ratzinger, “180 Degree Bending Systems for High Current Heavy Ion Linacs”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP4B07, pp. 1483-1485.
- Th. Weiler, R. W. Assmann, C. Bracco, V. Previtali, and S. Redaelli, “Beam Cleaning and Beam Loss Control”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGD08, pp. 359-362.
- S. De Silva, “Testing of two-cell RF-dipole crab cavity”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS35, unpublished.
- V. Galdi, S. Petracca, and I. M. Pinto, “Hybrid Computation of Normal Mode Tune Shifts in Rounded-Rectangular Pipes”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA128, pp. 2882-2884.
- M. Pham Tu, K. Mbaye, L. Wartski, and J. Halbritter, “Niobium Nitride Coated Superconducting Cavities”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87F03, pp. XX-XX.
- V. Zorin, I. Izotov, and V. Skalyga, “Optimization of Gasdynamic ECR Ion Sources”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOPO-19, pp. 114-114.
- A. Madur et al., “Troubleshooting Status for the ALS In-Vacuum Insertion Device”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP087, pp. 333-335.
- A. Kurup et al., “Large Emittance Beam Measurements for COMET Phase-I”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA075, pp. 2684-2686.
- M. K. Fukuda et al., “Development and Upgrade Plan of an X-ray Source Based on Laser Compton Scattering in Laser Undulator Compact X-ray Source(LUCX)”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1867-1869.
- Y.-E. S. Sun, K.-J. Kim, P. Piot, J. G. Power, and M. M. Rihaoui, “Design Study of a Transverse-to-Longitudinal Emittance Exchange Proof-of-principle Experiment”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN094, pp. 3441-3443.
- L. W. Lai et al., “Beam Instrumentation System for Shanghai Soft X-ray FEL Test Facility”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 17-20.
- A. Sokolovsky, “A New High Duty Cycle High Current 600 MeV Electron-Positron Linear Accelerator of Saclay”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper VIII-05, pp. 417-425.
- R. C. Webber and G. Apollinari, “Overview and Status Update of the Fermilab HINS Linac R&D Program”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP058, pp. 4902-4904.
- L.-H. Yu and B. Nash, “Linear Algebraic Method for Non-Linear Map Analysis”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP067, pp. 3862-3864.
- J. G. Power et al., “Pepper-pot Based Emittance Measurements of the AWA Photoinjector”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN117, pp. 4393-4395.
- F. Xu et al., “Hydrogen Cryosorption on Multi Walled Carbon Nanotubes”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD045, pp. 2515-2517.
- K. R. Kim et al., “Proton Beam Energy Measurement Using Semiconductor Detectors at the 45MeV Test Beam Line of PEFP”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN055, pp. 4126-4128.
- K. Hanke et al., “Status and Plans for the Upgrade of the CERN PS Booster”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3905-3907.
- H. Baumgartner, “The Cyclotron Kids' 2 MeV Proton Cyclotron”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WE1PB05, pp. 302-304.
- C. Boccard et al., “Tune Measurements in the SPS as Multicycling Machine”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP020L, pp. 1600-1602.
- G. Skripka, ?à. Andersson, P. F. Tavares, F. J. Cullinan, and R. Nagaoka, “Impedance Characterization and Collective Effects in the MAX IV 3 GeV Ring”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 843-846.
- D. Barni, A. Bosotti, G. Ciovati, C. Pagani, and P. Pierini, “SC Cavity Design for the 700 MHz TRASCO Linac”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP7B05, pp. 2019-2021.
- F. Hu et al., “Development of an X-band RF gun with four-feed coupler”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM137, pp. 1280-1283.
- R. L. Geng, S. Belomestnykh, H. Padamsee, P. Goudket, D. M. Dykes, and R. G. Carter, “Dynamics of Multipacting in Rectangular Coupler Waveguides and Suppression Methods”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper THP24, pp. 675-678.
- I. Izotov, V. Sidorov, V. Skalyga, and V. Zorin, “Preglow Phenomenon Origins and its Scaling for Ecris”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper TUCOBK01, pp. 87-89.
- J. Bahng, E.-S. Kim, and B. H. Choi, “High-current RFQ Design Study on RAON”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 990-993.
- F. W. Jones, W. Herr, and T. Pieloni, “Self-Consistent Parallel Multi Bunch Beam-Beam Simulation Using a Grid-Multipole Method”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP074, pp. 4482-4484.
- A. Valishev, G. Annala, V. A. Lebedev, and R. S. Moore, “Correction of Second Order Chromaticity at Tevatron”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS015, pp. 3922-3924.
- A. Dubrovskiy, “Control and Acquisition Software Complex for TBTS Experiments”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL020, pp. 168-170.
- J. H. wu, Q. Li, and W. Pan, “Temperature Precise Control in a Large Scale Helium Refrigerator”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC116, pp. 1331-1333.
- Y. Wei et al., “Design of a Passive Superconducting Harmonic Cavity for HALF Storage Ring”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1378-1380.
- H. Saito et al., “Characteristics of Polarized Coherent Radiation in Thz Region From a Crossed-Undulator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1769-1771.
- S. Walston et al., “Resolution of a High Performance Cavity Beam Position Monitor System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS049, pp. 4090-4092.
- P. H. Williams et al., “Developments in the CLARA FEL Test Facility Accelerator Design and Simulations”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP091, pp. 589-592.
- H. Miyauchi, S. Asaoka, and T. Tahara, “Beamline Front Ends at the 2.5-GeV Photon Factory Storage Ring”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 315-317.
- E. M?®tral, G. Arduini, F. Arnold Malandain, W. H?Âfle, and D. Manglunki, “Controlled Transverse Emittance Blow-Up in the CERN SPS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP073, pp. 3871-3873.
- R. Corsini et al., “Fast Vertical Beam Instability in the CTF3 Combiner Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP011, pp. 574-576.
- S. P. Antipov et al., “Wakefield Breakdown Test of a Diamond-Loaded Accelerating Structure”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THOBN6, pp. 2074-2076.
- M. Hager and M. Regodic, “A Modular Software Architecture for Applications that Support Accelerator Commissioning at MedAustron”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 938-941.
- A. V. Smirnov et al., “Necessary Condition for Beam Ordering”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper TUA1C03, pp. 87-90.
- P. L. Fan, X. He, J. Pang, and L. Yang, “The Beam Dynamics Simulation of an L-band Electron Gun using Genetic Algorithm”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 47-48.
- Z. J. Lu et al., “Design Studies of Output Window for CEPC Klystron”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 911-913.
- B. Buonomo, C. Di Giulio, and L. Foggetta, “The Frascati DAFNE LINAC modulator upgrade”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL131, pp. 862-865.
- Y.-C. Chae, L. Emery, A. H. Lumpkin, J. Song, and B. X. Yang, “Measurement of the Longitudinal Microwave Instability in the APS Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH068, pp. 1817-1819.
- T. O. Raubenheimer, W. Decking, L. Giannessi, and H.-S. Kang, “Summary Report: Linac-Based Light Sources”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 199-201.
- A. M. Rowe, A. Grassellino, T. D. Hall, M. E. Inman, S. T. Snyder, and E. J. Taylor, “Bipolar EP: Electropolishing without Fluorine in a Water Based Electrolyte”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUIOC02, pp. 404-409.
- J. R. Hunt, R. Bruce, F. Carra, F. Cerutti, J. Guardia, and J. Molson, “Collimation Strategies for Secondary Beams in FCC-hh Ion-Ion Operation”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2652-2655.
- P. He et al., “Preliminary Design of HEPS Storge Ring Vacuum Chambers and Components”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 52-55.
- I. E. Campisi and Z. D. Farkas, “The Pulsed RF Superconductivity Program at SLAC”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-7, pp. XX-XX.
- L. Shang, Y. Lu, F. Shang, and Y. Y. Wang, “The New Injection System of the HLS II”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA013, pp. 687-689.
- S. Venkatesan et al., “Engineering Challenges in BioSAXS for Australian Synchrotron”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 224.
- A. D. Palczewski et al., “Rework Recipe Development, Analysis and Results of Select 9-Cell Cavities for LCLS-II”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3968-3971.
- F. Tamura, H. Yoshikawa, J. Chiba, M. Yoshii, M. Tanaka, and S. Shimazaki, “J-PARC Timing System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TU115, pp. XX-XX.
- J. Bahng et al., “Development of High Power RF Amplifier System for the KBSI RFQ”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4257-4259.
- A. D. Yeremian, V. A. Dolgashev, J. Neilson, and S. G. Tantawi, “A Dual-mode Accelerating Cavity to Test RF Breakdown Dependence on RF Magnetic Fields”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC073, pp. 247-249.
Back to search