JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	A. Mayoral, M. Garc?¡a, D. L??pez, F. Ogando, J. Sanz, and P. Sauvan, “Beam Stop of Spiral2 Facility: Activation and Residual Dose Rate Calculations”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP003, pp. 811-813. 
[n]	Ph. Gayet et al., “First Operational Experience in Running a New 6 kW Cryoplant Cooling Superconducting Cavities in LEP at 4.5 K”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I17, pp. XX-XX. 
[n]	N. Simos et al., “Concept Design of the Target/Horn System for the BNL Neutrino Oscillation Experiment”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB044, pp. 1709-1711. 
[n]	M. W. Poole et al., “4GLS - a New Type of  Fourth Generation Light Source Facility”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAC004, pp. 189-191. 
[n]	N. Krupka, K. Escherich, M. Habermann, K. Harries, A. Matheisen, and B. Petersen, “Quality Control Update of the Cleanroom for Superconducting Multi Cell Cavities at DESY”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP13, pp. 483-485. 
[n]	M. Takao, S. Hashimoto, S. Sasaki, and Y. Miyahara, “Analytical Formulation of a Quasi-periodic Undulator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAQ21, pp. 1438-1440. 
[n]	D. M. Dykes and B. Taylor, “Development of a High Power RF System for the Daresbury SRS”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3475-3478. 
[n]	M. Acar, E. Blanco, D. Martin-Gomez, and J. P. Palluel, “Remote Controls for the Active Alignment System of the LHC Low Beta Quadrupoles”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP084, pp. 564-566. 
[n]	D. Walsh, W. Okell, T. Pacey, and E. Snedden, “Demonstration of an electro-optic spectral interferometry longitudinal profile monitor at Clara”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4855-4858. doi:10.18429/JACoW-IPAC2023-THPL171
[n]	Q. Qin et al., “Luminosity Enhancement and Performance in BEPCII”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPZ012, pp. 3708-3710. 
[n]	R. H. Helm, J. E. Clendenin, S. D. Ecklund, A. V. Kulikov, and R. Pitthan, “Isochronous 180[degree] Turns for the SLC Positron System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 500-503. 
[n]	T. Junquera, N. R. Chevalier, J. P. Thermeau, L. Medeiros-Romao, D. Vandeplassche, and H. Saugnac, “Preliminary Studies of the Cryogenic Refrigerator and Distribution Systems for the MYRRHA Proton Linac”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP081, pp. 331-333. 
[n]	E. Vogel et al., “SRF Gun Development at DESY”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 105-108. doi:10.18429/JACoW-LINAC2018-MOPO037
[n]	H. Tanaka, “Beam Dynamics in a CW Microtron for Industrial Applications”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5A01, pp. 1005-1007. 
[n]	A. D. Alarcon, “The Development of the Undulator Controls Module at the Linac Coherent Light Source”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP092, pp. 293-294. 
[n]	T. Lefevre, “Overview of the CLIC Beam Instrumentation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC139, pp. 1350-1352. 
[n]	E. Rossa, N. Adams, J.-M. Roth, and F. Tomasini, “Double Sweep Streak Camera for LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 783-786. 
[n]	G. Moreno et al., “Effect of High-Magnetic Field Region Geometry on the Efficiency of a 750 MHz IH Structure”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 150-153. doi:10.18429/JACoW-LINAC2022-MOPOGE05
[n]	H. J. Choi et al., “About BPMS to be Used for PAL-XFEL”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC25, pp. 112-115. 
[n]	D. M. Dykes, A. Jackson, and B. Taylor, “Breakdown and Resonance Behaviour of the SRS Waveguide”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3481-3484. 
[n]	M. Takao, “Impact of Betatron Motion on Path Lengthening and Momentum Aperture in a Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC072, pp. 3152-3154. 
[n]	M. A. Plum, A. A. Browman, D. Brown, D. M. Lee, and C. W. McCabe, “Fail-Safe Ion Chamber Errant Beam Detector Tailored for Personnel Protection”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1556-1559. 
[n]	B. Fernandez Adiego, E. Blanco Vinuela, and I. Prieto Barreiro, “UNICOS CPC6: Automated Code Generation for Process Control Applications”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS033, pp. 871-874. 
[n]	A. Wujek, G. Daniluk, M. M. Lipinski, and A. Rubini, “Managing your Timing System as a Standard Ethernet Network”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1007-1011. doi:10.18429/JACoW-ICALEPCS2017-TUSH303
[n]	G. Fischerauer and T. Weiland, “Three Dimensional Computer Design of Multi-Cell Accelerating Cavities”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 931-934. 
[n]	N. Nishimori, H. Tanaka, and T. Watanabe, “A Highly Brilliant Compact 3 GeV Light Source Project in Japan”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1478-1481. doi:10.18429/JACoW-IPAC2019-TUPGW035
[n]	K. Foraz et al., “Scheduling the Powering Tests”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP010, pp. 2545-2547. 
[n]	M. Zerlauth et al., “The LHC Post Mortem Analysis Framework”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP021, pp. 131-133. 
[n]	A. Jakob, K. Reidelbach, J. Pozimski, R. D, and H. Klein, “Diagnostic of the Compensation Process of Ion Beams with a Time-Resolving Ion Energy Spectrometer”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P016, pp. 246-248. 
[n]	R. P. Johnson, R. J. Abrams, M. A. Cummings, and T. J. Roberts, “Production and Collection of He-3 and Other Valuable Isotopes using Mu*STAR”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 527-529. doi:10.18429/JACoW-IPAC2018-MOPML054
[n]	H. R. Schneider and H. Lancaster, “Improved Field Stability in RFQ Structures with Vane Coupling Rings”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3007-3010. 
[n]	W. Butcher et al., “Experimental investigation into supersonic gas jet induced beam perturbation”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 399-403. doi:10.18429/JACoW-IBIC2025-TUPCO18
[n]	N. Tsoupas, E. Rodger, J. Claus, H. W. Foelsche, and P. Wanderer, “Design and B-field Measurements of a Lambertson Injection Magnet for the RHIC Machine”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP11, pp. 1352-1354. 
[n]	J. D. Gonz?ílez Cobas et al., “Free and Open Source Software at CERN: Integration of Drivers in the Linux Kernel”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THCHMUST04, pp. 1248-1251. 
[n]	K. Kumagai, N. Kumagai, K. Soutome, H. Tanaka, and C. Zhang, “Development and Installation of Skew Quadrupole Magnets for SPring-8 Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4A03, pp. 2104-2106. 
[n]	J. P. Holzbauer, D. Passarelli, and Y. M. Pischalnikov, “Testing of SSR1 Production Tuner for PIP-II”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2681-2683. doi:10.18429/JACoW-IPAC2018-WEPML005
[n]	Y. Ivanyushenkov et al., “Development of a Full Scale Superconducting Undulator Module for the ILC Positron Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN070, pp. 2862-2864. 
[n]	O. Gal, M. Abs, J.-M. Capdevila, F. Genin, Y. Jongen, and A. Nguyen, “Optical Properties of the Rhodotron Bending Magnets”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1048-1051. 
[n]	C. Eckardt et al., “The S-DALINAC Polarized Injector SPIN - Performance and Results”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP019, pp. 853-855. 
[n]	P. Chu et al., “XAL Adoption Experience at LCLS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP012, pp. 117-119. 
[n]	E. E. Schmidt et al., “Magnetic Field Data on Fermilab Energy Saver Quadrupoles”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3384-3387. 
[n]	S. H. Kim et al., “The Fast Interlock Controller for High Power Pulse Modulator at PAL-XFEL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3561-3563. doi:10.18429/JACoW-IPAC2016-THPMW012
[n]	C. Benvenuti et al., “Niobium Sputter-Coated Copper Resonators”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D24, pp. 1028-1037. 
[n]	J. M. Mosthaf, Th. Haberer, S. Hanke, K. H?â, and A. Peters, “Status Update for the HIT Accelerator Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1409-1411. doi:10.18429/JACoW-ICALEPCS2017-THPHA028
[n]	J. I. M. Botman, T. A. M. Derksen, H. Fiedler, H. L. Hagedoorn, C. J. Timmermans, and Y. J. E. Wintraecken, “An Irradiation Production Unit for Polymer Research”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP048G, pp. 2699-2701. 
[n]	P. A. Lin, K. H. Hsu, C. K. Kuan, C.-S. Lin, H. Y. Lin, and I. C. Sheng, “Manufacturing and Inspecting Supporting Tables for Front End in Taiwan Photon Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 4031-4033. doi:10.18429/JACoW-IPAC2014-THPRI108
[n]	M. E. Read, V. Granatstein, L. Ives, W. Lawson, G. Miram, and G. Nusinovich, “A Magnetron Injection Gun with Inverted Geometry for an 80 MW Gyroklystron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE027, pp. 1140-1141. 
[n]	A. Chan et al., “The PEP-II Project-Wide Database”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR18, pp. 840-842. 
[n]	B. Krevet and H. O. Moser, “Theoritical Study of Ramping in a Storage Ring Containing Superconducting Magnets with Iron”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1831-1834. 
[n]	A. K. Krasnykh, J. Neilson, and A. D. Yeremian, “Concept of RF Linac for Intra-pulse Multi-energy Scan”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3180-3182. doi:10.18429/JACoW-IPAC2016-THOAB02
[n]	J.-L. Pellegrin, “Transverse Oscillations Damping with Wide-Band Feedback on SPEAR II”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1500-1505. 
[n]	Y. Shoji, “Multi-Element Corrector Magnet for the Storage Ring NewSUBARU”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB007, pp. 289-291. 
[n]	W. Wuensch, “Progress in Understanding the High-gradient Limitations of Accelerating Structures”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THYMA02, pp. 544-548. 
[n]	W. Singer, A. Brinkmann, D. Hui, H. Kaiser, D. Proch, and X. Singer, “Quality Control and Purification Heat Treatment of Niobium for TTF”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUA007, pp. 103-108. 
[n]	W. K. van Asselt, L. A. Ahrens, P. R. Cameron, S. Mandell, G. A. Smith, and W. Zhang, “The Tune Meter Systems at the AGS Complex”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1273-1276. 
[n]	R. A. Baartman, G. Franchetti, and E. M?®tral, “Summary of Group A: Beam Dynamics in High Intensity Circular Machines”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper CPL01, pp. 482-484. 
[n]	D. Willeman, E. Blanco Vinuela, B. Bradu, and J. O. Ortola Vidal, “UNICOS CPC New Domains of Application: Vacuum and Cooling & Ventilation”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKN024, pp. 752-755. 
[n]	V. Kamerdzhiev et al., “BPM System Upgrade at COSY”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 303-306. doi:10.18429/JACoW-IBIC2018-TUPC04
[n]	V. H. Hardion, J. Lidon-Simon, M. Lindberg, A. Milan-Otero, A. G. Persson, and D. P. Spruce, “The Internet of Things and Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCB09, pp. 974-977. 
[n]	I. P. S. Martin et al., “Progress with the Booster Design for the Diamond-II Upgrade”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 286-289. doi:10.18429/JACoW-IPAC2021-MOPAB071
[n]	M. Takao, T. Ohshima, S. Sasaki, J. Schimizu, K. Soutome, and H. Tanaka, “Injection Beam Loss at the SPring-8 Storage Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF048, pp. 417-419. 
[n]	P. Golonka, M. Gonzalez-Berges, J. Guzik, and R. Kulaga, “Future Archiver for CERN SCADA Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1442-1445. doi:10.18429/JACoW-ICALEPCS2017-THPHA037
[n]	F. Long, Y. P. Liu, X. Qi, and Z. H. ZhenHua, “Conceptual Design for the HEPS Power Supply System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3540-3542. doi:10.18429/JACoW-IPAC2016-THPMW004
[n]	T. Wlostowski, J. Serrano, and F. Vaga, “Developing Distributed Hard-Real Time Software Systems Using FPGAs and Soft Cores”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1073-1078. doi:10.18429/JACoW-ICALEPCS2015-THHA2I01
[n]	A. Antoine, E. Carlier, and N. Voumard, “The LHC Beam Dumping System Trigger Synchronisation and Distribution System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_020. 
[n]	E. Feldmeier, Th. Haberer, A. Peters, C. Sch?Âmers, and R. Steiner, “Magnetic Field Correction in Normal Conducting Synchrotrons”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD004, pp. 675-677. 
[n]	J. Branlard et al., “European XFEL RF Gun Commissioning and LLRF Linac Installation”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2427-2429. doi:10.18429/JACoW-IPAC2014-WEPME065
[n]	C. Adolphsen et al., “Design, Fabrication and Measurement of the First Rounded Damped Detuned Accelerator Structure (RDDS1)”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUA03, pp. 377-379. 
[n]	P. Chu, S. Chevtsov, G. B. Shen, and J. Wu, “Service Oriented Architecture for High Level Applications”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC072, pp. 1886-1888. 
[n]	K. Togawa, T. Hara, and H. Tanaka, “Design Study of Nonlinear Energy Chirp Correction Using Sextupole Magnets at the Soft X-Ray Free-Electron Laser Beamline of SACLA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1782-1784. doi:10.18429/JACoW-IPAC2019-TUPRB042
[n]	A. Devred, “High Field Accelerator Magnets Beyond LHC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAB002, pp. 146-150. 
[n]	A. Zholents, M. Zolotorev, and W. Wan, “Generation of Attosecond Electron Bunches”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAC004, pp. 723-725. 
[n]	C. F. Fluder, V. Lefebvre, M. Pezzetti, A. Tovar, P. Plutecki, and T. Wolak, “Automation of the Software Production Process for Multiple Cryogenic Control Applications”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 375-379. doi:10.18429/JACoW-ICALEPCS2017-TUPHA006
[n]	G. A. Amatuni et al., “AREAL 50 MeV Electron Accelerator Project for THz and Middle IR FEL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1355-1357. doi:10.18429/JACoW-IPAC2017-TUPAB020
[n]	M. Ritzert, E. Blanco Vinuela, M. Ostrega, and L. Zwalinski, “UNICOS Framework and EPICS: A Possible Integration”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 915-917. doi:10.18429/JACoW-ICALEPCS2017-TUPHA201
[n]	R. Tavcar, J. Dedic, Z. Kroflic, R. Stefanic, and J. Gutleber, “Timing System for MedAustron Based on Off-The-Shelf MRF Transport Layer”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC147, pp. 424-426. 
[n]	J. A. Clarke et al., “Update on Commissioning and Operations with the Second Superconducting Wiggler at Daresbury”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 648-651. 
[n]	I. Rutkowski, L. Butkowski, M. Hoffmann, H. Schlarb, and Ch. Schmidt, “REGAE LLRF Control System Overview”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA031, pp. 3210-3212. 
[n]	S. Matsumoto et al., “High Power Testing Results of the X-Band Mixed-Mode RF Windows for Linear Colliders”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THA02, pp. 736-738. 
[n]	S. Blanchard et al., “The Linac4 Vacuum Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1494-1497. doi:10.18429/JACoW-ICALEPCS2017-THPHA056
[n]	M. Kreider, W. W. Terpstra, J. H. Lewis, J. Serrano, and T. Wlostowski, “EtherBone - A Network Layer for the Wishbone SoC Bus”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEBHMULT03, pp. 642-645. 
[n]	F. Toral et al., “Design, Manufacturing and Tests of a Micrometer Precision Mover for CTF3 Quadrupoles”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD040, pp. 1517-1519. 
[n]	K. Zapfe-D??ren, F. C. Herrmann, D. Hubert, and P. Schm??ser, “A New Flange Design for the Superconducting Cavities for TESLA”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C06, pp. 457-462. 
[n]	P. Niedermayer et al., “First implementation of RF-KO slow extraction at COSY”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3568-3570. doi:10.18429/JACoW-IPAC2024-THPR34
[n]	N. M. Kroll and K. Ko, “Mode Filter Designfor the NLC Overmoded RF Power Transport System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2010-2013. 
[n]	M. S. de Jong and F. P. Adams, “Cavity RF Mode Analysis Using a Boundary-Integral Method”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 835-838. 
[n]	D. Rogind, M. Boyes, and H. Shoaee, “SLAC LCLS-II Injector Source Controls and Early Injector Commissioning”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1340-1343. doi:10.18429/JACoW-ICALEPCS2017-THPHA002
[n]	C. T. Rogers and M. Ellis, “High Precision Measurement of Muon Beam Emittance Reduction in MICE”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE013, pp. 1330-1332. 
[n]	Y. Shoji and T. Takahashi, “Coherent Synchrotron Radiation Burst from Electron Storage Ring under External RF Modulation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC048, pp. 178-180. 
[n]	Y. Shoji, K. Takeda, T. Asaka, Y. Minagawa, S. Suzuki, and Y. Takemura, “Electron Storage Ring as a Single Shot Linac Beam Monitor”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUCC01, pp. 302-306. 
[n]	V. Alferov et al., “LabView Control System of the Cryogenic Complex for the Kaon RF-Separator at IHEP”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB038, pp. 257-259. 
[n]	D. Hunt, K. Kennedy, and T. Stevens, “Design of the PEP-II Low Energy Ring Vacuum System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP13, pp. 2067-2068. 
[n]	G. Velev et al., “Field Quality of the LHC Inner Triplet Quadrupoles being Fabricated at Fermilab”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE015, pp. 1969-1971. 
[n]	C. Kiel, J. Keintzel, and F. Zimmermann, “Modelling resonant depolarisation”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 298-301. doi:10.18429/JACoW-IPAC2025-MOPM013
[n]	F. Yaman, W. Ackermann, and T. Weiland, “Comparison of Eigenvalue Solvers for Large Sparse Matrix Pencils”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper FRSAC2, pp. 287-289. 
[n]	C. Pagani et al., “Full Power Tests of the First RF Cavity for the Milan K800 Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I-01, pp. 271-274. 
[n]	J. D. Gilpatrick, J. F. Power, R. B. Shurter, M. Stettler, J. F. O, and D. Martinez, “LEDA & APT Beam Position Measurement System:  Design and Initial Tests”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4060, pp. 532-534. 
[n]	W. Scandale et al., “Controlling Field Quality in Magnet Production”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAB009, pp. 173-175. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search