Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Spickermann, M. J. Borden, C. S. Feigerle, R. J. Macek, R. W. Shaw, and I. Sugai, “Comparison of Graphite and Diamond Structured Carbon Stripper Foils under Operational Conditions at the Los Alamos PSR”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUAZ05, pp. 112-116.
[n] A. Takagi et al., “An Irradiation System for Carbon Stripper Foils with 750 keV H- Beams”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS028, pp. 1550-1552.
[n] E. Cenni et al., “Construction and Quality Control of Synchrotron SOLEIL Beam Position Monitors”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD019, pp. 487-489.
[n] G. Ellwood and R. J. S. Greenhalgh, “Beam Impact of the ILC Collimators”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS068, pp. 703-705.
[n] K. Umemori, T. Furuya, H. Sakai, M. Sawamura, K. Shinoe, and T. Takahashi, “Results of Vertical Tests for KEK-ERL 9-cell Superconducting Cavity”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC030, pp. 2956-2958.
[n] Y. Saito, S. Y. Soeta, M. Washio, Y. Hosaka, and K. Sakaue, “Development of a Fiber Laser for Improving the Pulse Radiolysis System”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 299-301. doi:10.18429/JACoW-NAPAC2016-TUPOA05
[n] Y. Tian, L. R. Dalesio, G. Ganetis, W. Louie, and J. Riciardelli, “Power Supply Control System of NSLS-II”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEB005, pp. 385-387.
[n] A. H. Trudel et al., “Control System of the SPIRAL2 Superconducting Linear Accelerator”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WEPHA154, pp. XX-XX.
[n] D. Kraemer, B. Holzer, E. Jaeschke, W. Ott, and R. Repnow, “The Magnetsystem of the TSR”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1175-1178.
[n] A. Kiyomichi, N. Hosoda, M. Yamaga, M. Ishii, T. Fukui, and H. Maesaka, “Construction of Beam Monitor Control System for Beam Transport From SACLA to SPring-8”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1551. doi:10.18429/JACoW-ICALEPCS2019-THAPP03
[n] A. Sukhanov and J. P. Jamilkowski, “A Very Lightweight Process Variable Server”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1455. doi:10.18429/JACoW-ICALEPCS2019-WEPHA151
[n] M. A. G. Johansson, L.-J. Lindgren, M. Sj?Âstr?Âm, and P. F. Tavares, “MAX IV 3 GeV Storage Ring Magnet Block Production Series Measurement Results”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1157-1159. doi:10.18429/JACoW-IPAC2016-TUPMB023
[n] R. J. Williams et al., “Building the Control System to Operate the Cryogenic Near Infrared Spectropolarimeter Instrument for the Daniel K. Inouye Solar Telescope”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1575. doi:10.18429/JACoW-ICALEPCS2019-THBPP01
[n] H. Mueller et al., “Status of the Super-FRS Magnet Devlopment for Fair”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2792-2794. doi:10.18429/JACoW-IPAC2015-WEPMA019
[n] E. Al-Dmour, J. Ahlback, D. Einfeld, M. J. Grabski, and P. F. Tavares, “The Status of the Vacuum System of the MAX IV Laboratory”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI043, pp. 3382-3384.
[n] J. Ph. G. L et al., “The Second LHC Long Shutdown (LS2) for the Superconducting Magnets”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 240-243. doi:10.18429/JACoW-IPAC2018-MOPMF056
[n] J. C. Dooling et al., “Calibration and Simulation of the LCLS Undulator Beam Loss Monitors using APS Accelerators”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP273, pp. 618-620.
[n] H. S. Kim et al., “Beam Phase Measurement for PEFP Linear Accelerator”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB022, pp. 894-896.
[n] C. Zhang et al., “Front-End Linac Design and Beam Dynamics Simulations for MYRRHA”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPLB03, pp. 813-815.
[n] D. Bogert, W. Fowler, S. Holmes, P. Martin, and T. Pawlak, “The Status of the Fermilab Main Injector Project”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPG01, pp. 391-395.
[n] H. Hayano et al., “Lifetime Measurement of ATF Damping Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP19H, pp. 1318-1320.
[n] A. A. Gevorgyan, V. S. Avagyan, B. Grigoryan, T. H. Mkrtchyan, A. S. Simonyan, and V. V. Vardanyan, “Design and Performance of Ultimate Vacuum System for the AREAL Test Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2311-2313. doi:10.18429/JACoW-IPAC2014-WEPME025
[n] P.-J. Wen, S.-P. Kao, Y.-C. Lin, S.-Y. Lin, and M.-H. Chang, “Respiratory protective equipment fit tests for researchers at the National Synchrotron Radiation Research Center”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5134-5137. doi:10.18429/JACoW-IPAC2023-THPM116
[n] J. A. Vasquez, “Data Acquisition System Deployment Using Docker Containers for the SMuRF Project”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 598. doi:10.18429/JACoW-ICALEPCS2019-MOPHA154
[n] M. K. Craddock and Y.-N. Rao, “FFAGs and Cyclotrons with Reverse Bends”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP114, pp. 5044-5046.
[n] C. Limborg, A. Ringwall, M. Rowen, and J. Stieber, “An Ultra-Violet Light Monitor for SPEAR3”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI096, pp. 1924-1926.
[n] M. S. Toplis, J. W. McKenzie, B. D. Muratori, D. J. Scott, and P. H. Williams, “Comparison of Model vs. Reality for VELA”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1810-1813. doi:10.18429/JACoW-IPAC2016-TUPOW028
[n] K.C.D. Chan, A. Browman, R. L. Hutson, R. J. Macek, P. J. Tallerico, and C. A. Wilkinson, “Development of a RAMI Program for LANSCE Upgrade”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR12, pp. 822-824.
[n] A. Andersson, M. Apollonio, D. Olsson, M. Sjöström, and P. Tavares, “A report on a lower emittance lattice at MAX IV 3 GeV storage ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 998-1001. doi:10.18429/JACoW-IPAC2023-MOPM012
[n] R. Filippini et al., “Reliability Assessment of the LHC Machine Protection System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP011, pp. 1257-1259.
[n] H. J. Wang, L. Kang, R. H. Liu, H. Qu, and D. H. Zhu, “The Structure Design and Analysis of Proton Beam Window for CSNS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI029, pp. 3361-3363.
[n] H. Burkhardt, B. Goddard, Y. Kadi, V. Kain, T. Risselada, and W. J. M. Weterings, “Collimation in the Transfer Lines to the LHC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP009, pp. 1135-1137.
[n] F. M?®ot, P. N. Joshi, J. P. Lidestri, and N. Tsoupas, “Progress on the Optics Modeling of BMIÔÇÖs Ion Rapid-Cycling Medical Synchrotron at BNL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3561-3563. doi:10.18429/JACoW-IPAC2019-THPMP050
For LaTeX
Use Complete Form
For BibTeX
References
- T. Spickermann, M. J. Borden, C. S. Feigerle, R. J. Macek, R. W. Shaw, and I. Sugai, “Comparison of Graphite and Diamond Structured Carbon Stripper Foils under Operational Conditions at the Los Alamos PSR”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper TUAZ05, pp. 112-116.
- A. Takagi et al., “An Irradiation System for Carbon Stripper Foils with 750 keV H- Beams”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS028, pp. 1550-1552.
- E. Cenni et al., “Construction and Quality Control of Synchrotron SOLEIL Beam Position Monitors”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD019, pp. 487-489.
- G. Ellwood and R. J. S. Greenhalgh, “Beam Impact of the ILC Collimators”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS068, pp. 703-705.
- K. Umemori, T. Furuya, H. Sakai, M. Sawamura, K. Shinoe, and T. Takahashi, “Results of Vertical Tests for KEK-ERL 9-cell Superconducting Cavity”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC030, pp. 2956-2958.
- Y. Saito, S. Y. Soeta, M. Washio, Y. Hosaka, and K. Sakaue, “Development of a Fiber Laser for Improving the Pulse Radiolysis System”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 299-301.
- Y. Tian, L. R. Dalesio, G. Ganetis, W. Louie, and J. Riciardelli, “Power Supply Control System of NSLS-II”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEB005, pp. 385-387.
- A. H. Trudel et al., “Control System of the SPIRAL2 Superconducting Linear Accelerator”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper WEPHA154, pp. XX-XX.
- D. Kraemer, B. Holzer, E. Jaeschke, W. Ott, and R. Repnow, “The Magnetsystem of the TSR”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1175-1178.
- A. Kiyomichi, N. Hosoda, M. Yamaga, M. Ishii, T. Fukui, and H. Maesaka, “Construction of Beam Monitor Control System for Beam Transport From SACLA to SPring-8”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1551.
- A. Sukhanov and J. P. Jamilkowski, “A Very Lightweight Process Variable Server”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1455.
- M. A. G. Johansson, L.-J. Lindgren, M. Sj?Âstr?Âm, and P. F. Tavares, “MAX IV 3 GeV Storage Ring Magnet Block Production Series Measurement Results”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1157-1159.
- R. J. Williams et al., “Building the Control System to Operate the Cryogenic Near Infrared Spectropolarimeter Instrument for the Daniel K. Inouye Solar Telescope”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1575.
- H. Mueller et al., “Status of the Super-FRS Magnet Devlopment for Fair”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2792-2794.
- E. Al-Dmour, J. Ahlback, D. Einfeld, M. J. Grabski, and P. F. Tavares, “The Status of the Vacuum System of the MAX IV Laboratory”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI043, pp. 3382-3384.
- J. Ph. G. L et al., “The Second LHC Long Shutdown (LS2) for the Superconducting Magnets”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 240-243.
- J. C. Dooling et al., “Calibration and Simulation of the LCLS Undulator Beam Loss Monitors using APS Accelerators”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP273, pp. 618-620.
- H. S. Kim et al., “Beam Phase Measurement for PEFP Linear Accelerator”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB022, pp. 894-896.
- C. Zhang et al., “Front-End Linac Design and Beam Dynamics Simulations for MYRRHA”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPLB03, pp. 813-815.
- D. Bogert, W. Fowler, S. Holmes, P. Martin, and T. Pawlak, “The Status of the Fermilab Main Injector Project”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPG01, pp. 391-395.
- H. Hayano et al., “Lifetime Measurement of ATF Damping Ring”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP19H, pp. 1318-1320.
- A. A. Gevorgyan, V. S. Avagyan, B. Grigoryan, T. H. Mkrtchyan, A. S. Simonyan, and V. V. Vardanyan, “Design and Performance of Ultimate Vacuum System for the AREAL Test Facility”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2311-2313.
- P.-J. Wen, S.-P. Kao, Y.-C. Lin, S.-Y. Lin, and M.-H. Chang, “Respiratory protective equipment fit tests for researchers at the National Synchrotron Radiation Research Center”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM116, pp. 5134-5137.
- J. A. Vasquez, “Data Acquisition System Deployment Using Docker Containers for the SMuRF Project”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 598.
- M. K. Craddock and Y.-N. Rao, “FFAGs and Cyclotrons with Reverse Bends”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP114, pp. 5044-5046.
- C. Limborg, A. Ringwall, M. Rowen, and J. Stieber, “An Ultra-Violet Light Monitor for SPEAR3”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI096, pp. 1924-1926.
- M. S. Toplis, J. W. McKenzie, B. D. Muratori, D. J. Scott, and P. H. Williams, “Comparison of Model vs. Reality for VELA”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1810-1813.
- K.C.D. Chan, A. Browman, R. L. Hutson, R. J. Macek, P. J. Tallerico, and C. A. Wilkinson, “Development of a RAMI Program for LANSCE Upgrade”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR12, pp. 822-824.
- A. Andersson, M. Apollonio, D. Olsson, M. Sjöström, and P. Tavares, “A report on a lower emittance lattice at MAX IV 3 GeV storage ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM012, pp. 998-1001.
- R. Filippini et al., “Reliability Assessment of the LHC Machine Protection System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP011, pp. 1257-1259.
- H. J. Wang, L. Kang, R. H. Liu, H. Qu, and D. H. Zhu, “The Structure Design and Analysis of Proton Beam Window for CSNS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI029, pp. 3361-3363.
- H. Burkhardt, B. Goddard, Y. Kadi, V. Kain, T. Risselada, and W. J. M. Weterings, “Collimation in the Transfer Lines to the LHC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP009, pp. 1135-1137.
- F. M?®ot, P. N. Joshi, J. P. Lidestri, and N. Tsoupas, “Progress on the Optics Modeling of BMIÔÇÖs Ion Rapid-Cycling Medical Synchrotron at BNL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3561-3563.
Back to search