JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. Jackson et al., “Configuration and Validation of the LHC Beam Loss Monitoring System”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB31, pp. 240-242. 
[n]	M. Placidi et al., “Design Concepts of a Beam Spreader for a Next Generation Free Electron Laser”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP071, pp. 1765-1767. 
[n]	J. H. Shao et al., “Observation of Dark Current Dependence on Stored Energy in an L-Band RF Gun”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2956-2959. doi:10.18429/JACoW-IPAC2015-WEPMN016
[n]	G. D'Auria et al., “Linac Upgrading Program for the Fermi Project : Status and Perspectives”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN029, pp. 977-979. 
[n]	T. Nakamura et al., “Laser Acceleration of Negative Ions by Coulomb Implosion Mechanism”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA059, pp. 211-213. 
[n]	M. Yoshimoto et al., “Dynamic Aperture of the PoP-FFAG Proton Synchrotron”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE062, pp. 1320-1322. 
[n]	G. D'Auria et al., “The X-band System for the FERMI@ELETTRA FEL Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE015, pp. 2173-2175. 
[n]	N. Lipkowitz et al., “Longitudinal Beam Tuning at FACET”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC052, pp. 1287-1289. 
[n]	W. Gai and W. Liu, “Conceptual Design of an Electromagnetic Driven Undulator Based Positron Target System for ILC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3908-3910. doi:10.18429/JACoW-IPAC2014-THPRI060
[n]	T. Bertuccio et al., “Improvement in the RF Capture by Using Nonsinusoidal Accelerating Voltages”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 533-535. 
[n]	C. Hessler et al., “Results from the HiRadMat Primary Beam Line Commissioning”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS053, pp. 3547-3549. 
[n]	R. G. Heine, M. Dehn, K.-H. Kaiser, H.-J. Kreidel, and U. L. Ludwig-Mertin, “Extension of the 3-spectrometer Beam Transport Line for the KAOS Spectrometer at MAMI and Recent Status of MAMI”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPZ037, pp. 880-882. 
[n]	N. Lipkowitz, F.-J. Decker, G. R. White, M. Woodley, and G. Yocky, “Start-to-end Particle Tracking of the FACET Accelerator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO067, pp. 2018-2020. 
[n]	J. Corlett, R. Rimmer, N. Holtkamp, A. Moretti, and H. Kirk, “A High Power RF Coupler Design for Muon Cooling RF Cavities”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP98, pp. 896-898. 
[n]	A. Bogacz et al., “Universal Injector at LERF – Baseline Design”, presented at the IPAC'26, Deauville, France, May 2026, paper THP5314, unpublished. 
[n]	R. Gorbonosov, V. Baggiolini, G. Kruk, and M. Zerlauth, “Plug-in Based Analysis Framework for LHC Post-Mortem Analysis”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC143, pp. 446-448. 
[n]	J. H. Li et al., “The Conceptual Design of the China White Neutron Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2127-2130. doi:10.18429/JACoW-IPAC2014-WEPRO075
[n]	Y. Liu, A. V. Aleksandrov, C. D. Long, A. A. Menshov, and A. P. Zhukov, “Laser Wire Based Transverse Emittance Measurement of H- Beam at Spallation Neutron Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 879-881. doi:10.18429/JACoW-IPAC2015-MOPHA041
[n]	A. Passner, T. Bertuccio, M. Isaila, D. Sober, and K. Vosburgh, “Production and Acceleration of Deuterium and Helium Ions”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 145-148. 
[n]	T. Kusaka, M. Hara, A. Miura, and T. Yoshiyuki, “RF System for the STA SR Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 180-183. 
[n]	S. De Santis et al., “Injection/Extraction Kicker for the ALS-U Project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1977-1979. doi:10.18429/JACoW-IPAC2014-WEPRO016
[n]	P. Frigola et al., “Advance Additive Manufacturing Method for SRF Cavities of Various Geometries”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB042, pp. 1181-1184. 
[n]	C. E. Peters and M. A. Power, “Distributed Network Monitoring Made Easy - An Application for Accelerator Control System Process Monitoring”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC124, pp. 875-878. 
[n]	K. Anderson, C. M. Bhat, J. Marriner, and Z. Tang, “An Antiproton Target Design for Increased Beam Intensity”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1946-1949. 
[n]	J. H. Shao et al., “Dark Current Imaging Experiment in an L-band RF Gun”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2952-2955. doi:10.18429/JACoW-IPAC2015-WEPMN015
[n]	W. Sliwinski, P. Charrue, V. Kain, and G. Kruk, “Management of Critical Machine Settings for Accelerators at CERN”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP099, pp. 594-596. 
[n]	N. Nakamura, K. Haga, M. Izawa, T. Katsura, and S. Sakanaka, “Collective Effects in Single Bunch Mode at the Photon Factory Storage Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 440-443. 
[n]	B. D. Hartsell, K. Anderson, J. Hylen, V. I. Sidorov, and S. Tariq, “LBNF Hadron Absorber: Mechanical Design and Analysis for 2.4MW Operation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3318-3320. doi:10.18429/JACoW-IPAC2015-WEPTY025
[n]	Y. Futami et al., “Medical Application of the Positron Emitter Beam at HIMAC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5A01, pp. 2554-2556. 
[n]	A. V. Aleksandrov et al., “Commissioning of the New SNS RFQ and 2.5MeV Beam Test Facility”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2438-2440. doi:10.18429/JACoW-IPAC2017-TUPVA145
[n]	W. A. van Kampen and J. Liedorp, “Precession Injection in the Delft Isochronous Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-09, pp. 254-259. 
[n]	M. Pabst and K. Bongardt, “Longitudinal Trapping and Particle Loss of High Intensity Bunched Beams”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-7, pp. 50-52. 
[n]	R. H. Helm, H. A. Hogg, R. F. Koontz, G. A. Loew, R. H. Miller, and R. B. Neal, “Recent Beam Performance and Developments a SLAC”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 311-316. 
[n]	R. G. Eichhorn et al., “Higher Order Mode Absorbers for High Current SRF Applications”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THBA05, pp. 1036-1042. 
[n]	Y. Futami et al., “Spot Scanning System with RI Beam at HIMAC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1A17, pp. 2548-2550. 
[n]	L. N. Drosdal et al., “Automatic Injection Quality Checks for the LHC”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU011, pp. 1077-1080. 
[n]	J. Reich, S. Martin, D. Proticacute, and G. Riepe, “Improving the Energy Resolution of Particle Detection by Proper Beam Matching at JULIC”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-05, pp. 235-239. 
[n]	M. Shibata, T. Ishii, S. Kanazawa, Y. Sugiyama, S. Takeuchi, and T. Yoshida, “RF Performances of Superconducting Resonators for the JAERI Tandem Booster”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I35, pp. XX-XX. 
[n]	G. Yocky, F.-J. Decker, N. Lipkowitz, U. Wienands, and M. Woodley, “Anomalously Long Bunches from the SLAC North Damping Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO065, pp. 2015-2017. 
[n]	L. Cseppento, V. Baggiolini, E. Fejes, Zs. Kovari, and N. Stapley, “CBNG - The New Build Tool Used to Build Millions of Lines of Java Code at CERN”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 789-793. doi:10.18429/JACoW-ICALEPCS2017-TUPHA163
[n]	Y. Futami et al., “Positron Camera System for Heavy-ion Radiotherapy at HIMAC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP1A16, pp. 2524-2526. 
[n]	M. M. Lipinski, J. Serrano, T. Wlostowski, and C. Prados, “Reliability in a White Rabbit Network”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEMMU007, pp. 698-701. 
[n]	D. M. Dykes, S. F. Hill, C. W. Horrabin, and Y. S. Kim, “A Low Power RF System for the PLS Cavity Test Facility”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1945-1948. 
[n]	D. Rogind, M. Boyes, and H. Shoaee, “SLAC LCLS-II Injector Source Controls and Early Injector Commissioning”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1340-1343. doi:10.18429/JACoW-ICALEPCS2017-THPHA002
[n]	T. Wlostowski, J. Serrano, and F. Vaga, “Developing Distributed Hard-Real Time Software Systems Using FPGAs and Soft Cores”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1073-1078. doi:10.18429/JACoW-ICALEPCS2015-THHA2I01
[n]	V. Baggiolini, M. Arruat, D. Csikos, R. Gorbonosov, P. Tarasenko, and Z. Zaharieva, “Backward Compatibility as a Key Measure for Smooth Upgrades to the LHC Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMS007, pp. 989-992. 
[n]	L. Pavlovic, A. O. Borga, M. Ferianis, M. Predonzani, and F. Rossi, “Bunch Arrival Monitor at FERMI@Elettra”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM086, pp. 394-397. 
[n]	M. S. Champion et al., “Plans for an Integrated Front-End Test Stand at the Spallation Neutron Source”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB044, pp. 954-956. 
[n]	P. Fournier et al., “CERN PS Laser Ion Source Development”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MODR5, pp. 103-105. 
[n]	E. Van der Bij, M. Cattin, E. Gousiou, J. Serrano, and T. Wlostowski, “CERN's FMC Kit”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper WECOCB01, pp. 1020-1023. 
[n]	R. Huhmann et al., “The FAIR Control System - System Architecture and First Implementations”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC097, pp. 328-331. 
[n]	C. E. Mitchell, R. D. Ryne, and F. H. O, “Accurate Modeling of Fringe Field Effects on Nonlinear Integrable Optics in IOTA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3294-3297. doi:10.18429/JACoW-IPAC2018-THPAK036
[n]	J.-P. Delahaye et al., “A Staged Muon Accelerator Facility for Neutrino and Collider Physics”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1872-1876. doi:10.18429/JACoW-IPAC2014-WEZA02
[n]	W. Liu, W. Gai, L. Rinolfi, and J. Sheppard, “An Undulator based Polarized Positron Source for CLIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC035, pp. 4131-4133. 
[n]	J. Tuckmantel, “Digital Generation of Noise-signals with Arbitrary Constant or Time-varying Spectra”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC103, pp. 1299-1301. 
[n]	A. Noda et al., “Laser Equipped Ion Storage and Cooler Ring, S-LSR”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper WEM203, pp. XX-XX. 
[n]	T. Mastorides, P. Baudrenghien, J. D. Fox, C. H. Rivetta, J. Tuckmantel, and D. Van Winkle, “Modeling and Simulation of the Longitudinal Beam Dynamics-RF Station Interaction in the LHC Rings”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC125, pp. 3278-3280. 
[n]	R. K. Jobe, M. J. Browne, M. Flores, N. Phinney, H. D. Schwarz, and J. C. Sheppard, “Computer Control of the Energy Output of a Klystron in the SLC”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 735-738. 
[n]	A. Guerrero, J. J. Gras, J-L. Nougaret, M. Ludwig, M. Arruat, and S. Jackson, “CERN Front-End Software Architecture for Accelerator Controls”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE612, pp. XX-XX. 
[n]	K. Mittag, H. D. Schwarz, and H. A. Schwettman, “Beam Breakup in a Superconducting Electron Accelerator”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper F03, pp. 131-139. 
[n]	S. Zelazny et al., “Orbit Display's Use of the Physics Application Framework for LCLS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THC004, pp. 673-675. 
[n]	D. Dunning et al., “The UK XFEL conceptual design and options analysis project”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 754-757. doi:10.18429/JACoW-LINAC2024-THPB059
[n]	E. E. Wisniewski et al., “Demonstration of Fast, Single-shot Photocathode QE Mapping Method Using MLA Pattern Beam”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1293-1295. doi:10.18429/JACoW-IPAC2018-TUPMF020
[n]	C. E. Peters, C. Dickerson, F. Garcia, and M. A. Power, “Integration of the TRACK Beam Dynamics Model to Decrease LINAC Tuning Times”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 291-294. doi:10.18429/JACoW-ICALEPCS2015-MOPGF092
[n]	A. Schwinn et al., “FESA3 ÔÇô The New Front-End Software Framework at CERN and the FAIR Facility”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WECOAA03, pp. 22-26. 
[n]	S. M. Cousineau et al., “Status of Preparations for a 10 us H- Laser-Assisted Stripping Experiment”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper WEO3AB02, pp. 299-303. 
[n]	C. Prados et al., “FAIR Timing System Developments Based on White Rabbit”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC092, pp. 1288-1291. 
[n]	C. Chanavat, M. Arruat, E. Carlier, and N. Magnin, “A Generic Timing Software for Fast Pulsed Magnet Systems at CERN”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1003-1006. doi:10.18429/JACoW-ICALEPCS2015-WEPGF127
[n]	C. Boucly, J. Borburgh, C. Bracco, E. Carlier, N. Magnin, and N. Voumard, “Operational Experience with a PLC Based Positioning System for a LHC Extraction Protection Element”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC068, pp. 254-257. 
[n]	D. Rogind et al., “Integrated Management Tool for Controls Software Problems, Requests and Project Tasking at SLAC”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOMAU008, pp. 59-62. 
[n]	D. Wang et al., “Phase-Modulation SLED Mode on BTW Sections at Elettra”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP099, pp. 1069-1071. 
[n]	M. Gourber-Pace, G. Kruk, and M. Misiowiec, “Status Report of the Measurement Service for the CERN Accelerator Logging”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP106, pp. 325-327. 
[n]	S. Rauch, R. Baer, and M. Thieme, “Managing Multiple Function Generators for FAIR”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO017, pp. 196-197. 
[n]	S. T. Page and R. Alemany-Fernandez, “An Operational Event Announcer for the LHC Control Centre Using Speech Synthesis”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN004, pp. 242-245. 
[n]	G. R. White et al., “AIDA, An Architecture for Distributed Accelerator Data at SLAC”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP020, pp. 715-717. 
[n]	C. I. Clarke et al., “FACET: SLAC's New User Facility”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP010, pp. 2741-2743. 
[n]	K. G. Hern?índez-Chah?¡n, S. Aull, P. F. Fern?índez L??pez, N. Schwerg, and N. Stapley, “Rigorous Data Processing and Automatic Documentation of SRF Cold Tests”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 543-546. doi:10.18429/JACoW-SRF2017-TUPB069
[n]	G. D'Auria et al., “Status and Upgrade Program of the FERMI@ELETTRA Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC007, pp. 79-81. 
[n]	J. D. Fox and H. D. Schwarz, “Phase and Amplitude Detection System for the Stanford Linear Accelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2264-2267. 
[n]	T. J. Ellison, J. C. Collins, D. L. Friesel, W. P. Jones, P. Schwandt, and W. T. Sloan, “Progress in Commissioning the IUCF Cooler”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1608-1611. 
[n]	H. Sakaki et al., “Designing Integrated Laser-Driven Ion Accelerator Systems for Hadron Therapy at PMRC (Photo Medical Research Center)”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP009, pp. 1309-1311. 
[n]	G. Kruk and M. Peryt, “JDataViewer - Java-based Charting Library”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP093, pp. 856-858. 
[n]	M. Kanazawa et al., “Present Status of the RI Beam Project in HIMAC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI090, pp. 2742-2744. 
[n]	P. R. Carriere, P. Frigola, D. Gamzina, T. Horn, and A. Y. Murokh, “Additive Manufacturing of Electrical and Thermal Devices: Challenges and Opportunities”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper THYBB2, unpublished. 
[n]	S. Zelazny et al., “Multi-Device Knob Utility for LCLS at SLAC”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP023, pp. 134-136. 
[n]	A. V. Shemyakin et al., “Design of 162-MHz CW Bunch-by-Bunch Chopper and Prototype Testing Results”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 428-433. doi:10.18429/JACoW-HB2018-THP1WC03
[n]	Y. Kobayashi and M. Izawa, “A Longitudinal Phase Space Monitor at the Photon Factory Storage Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P054, pp. 2171-2173. 
[n]	K. H. Kim et al., “Development of Pattern Awareness Unit (PAU) for the LCLS Beam Based Fast Feedback System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN032, pp. 954-957. 
[n]	C. F. Crowley et al., “LBNF 1.2 MW Target: Conceptual Design & Fabrication”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3315-3317. doi:10.18429/JACoW-IPAC2015-WEPTY023
[n]	R. F. Welton et al., “Development of the SNS External Antenna H- Ion Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP037, pp. 438-440. 
[n]	F. Furuta et al., “Vertical Electro-polishing Collaboration Between Cornell, KEK, and Marui Galvanizing Co. Ltd”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 563-566. doi:10.18429/JACoW-SRF2017-TUPB073
[n]	D. Yu, R. Yi, and A. Smirnov, “Band Gap Structures of PBG and Rod-loaded Cavities”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP048, pp. 688-690. 
[n]	T. Liu et al., “Investigation and improvement of slow extraction quality at HIRFL-CSRm”, presented at the IBIC'25, Liverpool, UK, Sep. 2025, paper MOPCO21, unpublished. 
[n]	F. M. Bieniosek, K. Anderson, and K. Fullett, “Requirements for a Beam Sweeping System for the Fermilab Antiproton Source Target”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAR17, pp. 1939-1941. 
[n]	J. Seeman et al., “Performance of the PEP-II B-Factory Collider at SLAC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP035, pp. 2369-2371. 
[n]	P. Krejcik et al., “Experience with the SLAC Controls Architecture Evolving to the Needs of the LCLS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP053, pp. XX-XX. 
[n]	E. B. Holzer et al., “Commissioning and Optimization of the LHC BLM System”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper WEO1C01, pp. 487-491. 
[n]	P. Craievich et al., “Commissioning of the Cavity BPM for the FERMI@Elettra FEL Project”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD14, pp. 329-331. 
[n]	Y. Yonemura et al., “Commissioning of 150MeV FFAG Synchronisation”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT066, pp. 2643-2645. 
[n]	T. Koseki, M. Izawa, and Y. Kamiya, “Development of a Damped Cavity with SiC Beam-Duct”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR04, pp. 1794-1796. 
[n]	Y. Bylinsky, V. Kukhtiev, P. Ostroumov, V. Paramonov, and R. E. Laxdal, “A Triple Gap Resonator Design for the Separated Function DTL at TRIUMF”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W010, pp. 1135-1137. 
[n]	M. Pabst and K. Bongardt, “Statistical Treatment of Misalignments in Linear Accelerators”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper E02, pp. 153-155. 
[n]	X. Qiu, “Picosecond-Resolution `Slice' Emittance Measurement of Electron Bunches”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7C001, pp. 1971-1975. 
[n]	A. Noda et al., “Recent Status of Laser Cooling for Mg Realized at S-LSR”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP050, pp. 3476-3478. 
[n]	H. Fadil et al., “COLLECTION AND COOLING SCHEME OF LASER PRODUCED ION BEAM”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper FRAM03, pp. XX-XX. 
[n]	B. Dehning et al., “First Experience with the LHC Beam Loss Monitoring System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP034, pp. 3522-3524. 
[n]	F. Furuta et al., “Updates of Vertical Electropolishing Studies at Cornell with KEK and Marui Galvanizing Co. Ltd .”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 208-210. doi:10.18429/JACoW-NAPAC2016-MOPOB61
[n]	F. Locci, J. P. Palluel, F. Ehm, L. Gallerani, J. Lauener, and R. Voirin, “CERN Controls Open Source Monitoring System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 403. doi:10.18429/JACoW-ICALEPCS2019-MOPHA085
[n]	P. Van Trappen et al., “SPS Beam Dump System (SBDS) Commissioning After Relocation and Upgrade”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2530-2532. doi:10.18429/JACoW-IPAC2022-THPOST039
[n]	S. O'Day and K. Anderson, “Electromagnetic, Thermal and Structural Analysis of the Fermilab Antiproton Source Lithium Collection Lens”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAQ22, pp. 1888-1890. 
[n]	A. Deshpande et al., “LBNF Hadron Absorber: Updated Mechanical Design and Analysis for 2.4 MW Operation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4078-4080. doi:10.18429/JACoW-IPAC2019-THPRB108
[n]	M. Arruat, S. Jackson, J-L. Nougaret, and M. Peryt, “Equipment Software Modelling for Accelerator Controls”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O5_001. 
[n]	M. Niccolini, T. P. Gharsa, F. Vaga, N. Magnin, and C. Boucly, “Real-Time control system upgrade of the CERN Linac4 pre-chopper”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 558-563. doi:10.18429/JACoW-ICALEPCS2025-TUPD017
[n]	K. Hanawa et al., “RADIOACTIVE BEAM PROJECT AT HIMAC”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THAU04, pp. XX-XX. 
[n]	C. Gonzalez-Ortiz, P. Ostroumov, and R. Ainsworth, “Optimizing the sextupole configuration for simultaneous correction of third order resonances at the recycler ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 736-739. doi:10.18429/JACoW-IPAC2024-MOPS16
[n]	F. M. Bieniosek et al., “Charge Stripper and MEBT for the $^3$He RFQ Accelerator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P111, pp. 3837-3839. 
[n]	A. O. Borga, R. De Monte, M. Ferianis, L. Pavlovic, and M. Predonzani, “The Diagnostics' Back-End Platform Based on the In House Developed A|D|A And A|D|O Boards”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM025, pp. 163-167. 
[n]	F. Casagrande et al., “Status of the Cryogenic System Commissioning at SNS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE005, pp. 970-972. 
[n]	M. Holding, C. M. Hammons, B. R. Lang, G. R. Murdoch, K. G. Potter, and R. T. Roseberry, “Engineering the SNS RTBT/Target Interface for Remote Handling”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE033, pp. 2278-2280. 
[n]	K. McGee et al., “Flux expulsion and material properties of Niobium explored in 644-650 MHz cavities”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3018-3021. doi:10.18429/JACoW-IPAC2023-WEPA157
[n]	M. Ferianis et al., “The Fermi@Elettra Cavity BPM System: Description and Commissioning Results”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOOC03, pp. 26-28. 
[n]	Z. Li, J. Wu, K. Gu, S. LU, and X. Qiu, “Design and development of turn-by-turn and bunch-by-bunch high-speed 128-channel data acquisition electronics applied to the HIAF facility”, presented at the IBIC'25, Liverpool, UK, Sep. 2025, paper MOPCO25, unpublished. 
[n]	I. E. Campisi et al., “4.2 K Operation of the SNS Cryomodules”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT085, pp. 4173-4175. 
[n]	J. Yoon, D. Cha, D. Lee, Y. W. Jo, Y. Jung, and Y. Kim, “Design update of the power couplers for the single-spoke resonators in Institute for Rare Isotope Science”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 425-427. doi:10.18429/JACoW-LINAC2024-TUPB045
[n]	P. Charrue et al., “Role-Based Access Control for the Accelerator Control System at CERN”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA04, pp. 90-92. 
[n]	J. G. Judkins, J. E. Clendenin, and H. D. Schwarz, “A Solid-State High-Power Amplifier for Driving the SLC Injector Kystron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2909-2912. 
[n]	M. A. Plum, M. Holding, and T. McManamy, “Beam Parameter Measurement and Control at the SNS Target”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE074, pp. 3913-3915. 
[n]	D. Lampridis, T. Gingold, F. Vaga, T. Wlostowski, A. Wujek, and M. Malczak, “The Distributed Oscilloscope: A Large-Scale Fully Synchronised Data Acquisition System Over White Rabbit”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 726. doi:10.18429/JACoW-ICALEPCS2019-TUBPR01
[n]	D. E. Suddeth, D. R. Schmitt, R. E. Timm, and A. J. Wright, “Pole Face Winding (PFW) Equipment for Eddy Current Correction at the Zero Gradient Synchrotron (ZGS)”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 397-399. 
[n]	T. L. Houck, J. B. Javedani, E. J. Lauer, G. E. Vogtlin, D. A. Goerz, and L. K. Tully, “Study of Vacuum Insulator Flashover for Pulse Lengths of Multi-Microseconds”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP021, pp. 610-612. 
[n]	C. Gonzalez-Ortiz, P. Ostroumov, and R. Ainsworth, “Simultaneous Compensation of Third-Order Resonances at the FNAL Recycler Ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3375-3378. doi:10.18429/JACoW-IPAC2023-WEPL112

For LaTeX

Use Complete Form

For BibTeX

References

Back to search