Favourites
For Word
[n] R. Pendleton, K. Ko, C. Ng, M. Neubauer, H. Schwarz, and R. Rimmer, “PEP-II B-Factory Prototype Higher Order Mode Load Design”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR07, pp. 1800-1802.
[n] S. Kwon et al., “A New Digital Feedback and Feedforward Controller for Cavity Field Control of the LANSCE Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2277-2280. doi:10.18429/JACoW-IPAC2018-WEPAL046
[n] J. Borer et al., “The LEP Beam Orbit Measurement System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 778-783.
[n] R. Ruland et al., “Alignment of the VISA Undulator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA134, pp. 1390-1392.
[n] L. Gupta et al., “Beam-Based Sextupolar Nonlinearity Mapping in CESR”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3565-3568. doi:10.18429/JACoW-IPAC2018-THPAK137
[n] S. S. Som, P. Bhattacharyya, A. Dutta Gupta, S. Ghosh, A. Mandal, and S. Seth, “Development of 650 MHz Cavities for the GeV Proton Accelerator in Project X”, in Proc. SRF'13, Paris, France, Sep. 2013, paper FRIOB03, pp. 1193-1197.
[n] R. J. Jim?®nez Estupi???ín et al., “Enhancing the Detector Control System of the CMS Experiment with Object Oriented Modelling”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 145-148. doi:10.18429/JACoW-ICALEPCS2015-MOPGF025
[n] G. Gammel et al., “Meqalac Development at Brookhaven”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3482-3485.
[n] M. Ball et al., “Beam Motions Near Separatrix”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP32, pp. 1548-1550.
[n] W. T. Weng et al., “1.5 GeV/c Multiturn Shaving Extraction and Its Transport Line for the Brookhaven AGS”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3224-3228.
[n] D. Brandt et al., “First Experience with a Low Emittance Lattice for the LEP Energy Upgrade Programme”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 768-771.
[n] P. L. Lemut, S. Zorzut, B. Batagelj, J. Tratnik, and M. Leskovec, “Evaluation of Short and Long-Term Stability of the 2998 MHz Reference-Clock Transfer System”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG009, pp. 41-43.
[n] H. R?Âcken et al., “Progress at Varian's Superconducting Cyclotrons: A Base for the ProBeamTM Platform”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT012, pp. 55-57.
[n] C. Piel et al., “Phase 1 Commissioning Status of the 40 MeV Proton/Deuteron Accelerator SARAF”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP038, pp. 3452-3454.
[n] K. Kamakura et al., “Development of Rapid Emittance Measurement System”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPPT009, pp. 171-173.
[n] L. Doolittle and C. Sibley, “SNS Beam Chopping and Its Implications for Machine Protection”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH125, pp. 2377-2379.
[n] S. R. Markham and R. G. Eichhorn, “On Quench Propagation, Quench Detection, and Second Sound in SRF Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3464-3466. doi:10.18429/JACoW-IPAC2015-WEPTY077
[n] A. Bertsche, J. Brodowski, J. Keane, A. W. Maschke, and R. Sanders, “Low Beta Accelerating System for Heavy Ions”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3742-3745.
[n] G. V. Eremeev et al., “Status of PIP-II 650 MHz Prototype Dressed Cavity Qualification”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2279-2282. doi:10.18429/JACoW-IPAC2021-TUPAB333
[n] B. Dwersteg, “High Power Windows at DESY - Operation Experiences, Development Work on TTF Input Couplers”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C37, pp. 740-752.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Pendleton, K. Ko, C. Ng, M. Neubauer, H. Schwarz, and R. Rimmer, “PEP-II B-Factory Prototype Higher Order Mode Load Design”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPR07, pp. 1800-1802.
- S. Kwon et al., “A New Digital Feedback and Feedforward Controller for Cavity Field Control of the LANSCE Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2277-2280.
- J. Borer et al., “The LEP Beam Orbit Measurement System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 778-783.
- R. Ruland et al., “Alignment of the VISA Undulator”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA134, pp. 1390-1392.
- L. Gupta et al., “Beam-Based Sextupolar Nonlinearity Mapping in CESR”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3565-3568.
- S. S. Som, P. Bhattacharyya, A. Dutta Gupta, S. Ghosh, A. Mandal, and S. Seth, “Development of 650 MHz Cavities for the GeV Proton Accelerator in Project X”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper FRIOB03, pp. 1193-1197.
- R. J. Jim?®nez Estupi???ín et al., “Enhancing the Detector Control System of the CMS Experiment with Object Oriented Modelling”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 145-148.
- G. Gammel et al., “Meqalac Development at Brookhaven”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3482-3485.
- M. Ball et al., “Beam Motions Near Separatrix”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP32, pp. 1548-1550.
- W. T. Weng et al., “1.5 GeV/c Multiturn Shaving Extraction and Its Transport Line for the Brookhaven AGS”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3224-3228.
- D. Brandt et al., “First Experience with a Low Emittance Lattice for the LEP Energy Upgrade Programme”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 768-771.
- P. L. Lemut, S. Zorzut, B. Batagelj, J. Tratnik, and M. Leskovec, “Evaluation of Short and Long-Term Stability of the 2998 MHz Reference-Clock Transfer System”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper MOPG009, pp. 41-43.
- H. R?Âcken et al., “Progress at Varian's Superconducting Cyclotrons: A Base for the ProBeamTM Platform”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MOPPT012, pp. 55-57.
- C. Piel et al., “Phase 1 Commissioning Status of the 40 MeV Proton/Deuteron Accelerator SARAF”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP038, pp. 3452-3454.
- K. Kamakura et al., “Development of Rapid Emittance Measurement System”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TUPPT009, pp. 171-173.
- L. Doolittle and C. Sibley, “SNS Beam Chopping and Its Implications for Machine Protection”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH125, pp. 2377-2379.
- S. R. Markham and R. G. Eichhorn, “On Quench Propagation, Quench Detection, and Second Sound in SRF Cavities”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3464-3466.
- A. Bertsche, J. Brodowski, J. Keane, A. W. Maschke, and R. Sanders, “Low Beta Accelerating System for Heavy Ions”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3742-3745.
- G. V. Eremeev et al., “Status of PIP-II 650 MHz Prototype Dressed Cavity Qualification”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2279-2282.
- B. Dwersteg, “High Power Windows at DESY - Operation Experiences, Development Work on TTF Input Couplers”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C37, pp. 740-752.
Back to search