JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

Favourites


For Word

[n]	J.-C. Gayde et al., “The potential contribution of a structured laser beam to accelerator alignment technology”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4044-4046. doi:10.18429/JACoW-IPAC2023-THPA041
[n]	W. H?Âfle et al., “Impact of a Wideband Feedback Prototype System on TMCI in the SPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1208-1211. doi:10.18429/JACoW-IPAC2018-TUZGBD4
[n]	J. C. Dooling, M. Borland, K. C. Harkay, R. T. Keane, B. J. Micklich, and C. Yao, “A Fast Beam Interlock System for the Advanced Photon Source Particle Accumulator Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1815-1818. doi:10.18429/JACoW-IPAC2018-WEPAF005
[n]	G. W. Wang et al., “Fabrication and Test of 500MHz Nb Cavity for BEPCII”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO052, pp. 512-514. 
[n]	A. H. Botha, “The Status of the South African National Accelerator Centre”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABI-04, pp. 33-42. 
[n]	B. Gladwyn, M. Duncan, O. Mohsen, and R. Ainsworth, “Impedance model for the Fermilab Recycler ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3167-3170. doi:10.18429/JACoW-IPAC2024-THPC64
[n]	U. Ratzinger et al., “Deceleration of Highly Charged Ions for the HITRAP Project at GSI”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP063, pp. 189-191. 
[n]	A. Olmos et al., “Integration of the Diamond Transverse Multibunch Feedback System at ALBA”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 414-417. doi:10.18429/JACoW-IBIC2015-TUPB046
[n]	H. Saugnac et al., “Status of the Beta 0.12 Superconducting Cryomodule Development for the Spiral2 Project”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH146, pp. 396-398. 
[n]	S. Stapnes, “CLIC Status and Outlook”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEYA01, pp. 2076-2080. 
[n]	B. Brajuskovic, J. T. Collins, P. K. Den Hartog, L. H. Morrison, and G. J. Waldschmidt, “Thermomechanical Design of Normal-Conducting Deflecting Cavities at the Advanced Photon Source for Short X-ray Pulse Generation”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FROBC04, pp. 3827-3829. 
[n]	E. W. Nissen, F. Lin, V. S. Morozov, and Y. Zhang, “Design of the Proposed Low Energy Ion Collider Ring at Jefferson Lab”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO077, pp. 1058-1060. 
[n]	E. N. Shaposhnikova, S. D. Fartoukh, and J.-B. Jeanneret, “LHC Abort Gap Filling by Proton Beam”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT031, pp. 611-613. 
[n]	G. Kotzian, W. H?â, and D. Valuch, “Sensitivity of the LHC Transverse Feedback System to Intra-Bunch Motion”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1916-1919. doi:10.18429/JACoW-IPAC2017-TUPIK093
[n]	C. Ronsivalle, L. Picardi, M. Vadrucci, and F. Ambrosini, “Simple Characterization Method of Small High Gradient Permanent Magnet Quadrupoles”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1250-1252. doi:10.18429/JACoW-IPAC2014-TUPRO091
[n]	P. Forck et al., “Scintillation Screen Investigations for High Energy Heavy Ion Beams at GSI”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD53, pp. 170-172. 
[n]	A. Ghaith et al., “Cryogenic Permanent Magnet Undulator for an FEL Application”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 554-556. doi:10.18429/JACoW-FEL2017-WEP065
[n]	S. Chel, A. Mosnier, T. Junquera, and M. Fouaidy, “Thermal Study of HOM Couplers for Superconducting RF Cavities”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 855-858. 
[n]	R. A. Jameson, R. L. Cady, D. J. Liska, J. B. Sharp, G. R. Swain, and J. D. Wallace, “Full Power Operation of the LAMPF 805 MHz System”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper F-2, pp. 483-504. 
[n]	S. S. Chang et al., “Operational Status of the PLS Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP091G, pp. 581-583. 
[n]	G. M. Wang et al., “NSLS II Commissioning Tools”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO17, pp. 276-278. 
[n]	J. Holma, M. J. Barnes, and C. Belver-Aguilar, “Measurements on Prototype Inductive Adders with Ultra-flat-top Output Pulses for CLIC DR Kickers”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 128-130. doi:10.18429/JACoW-IPAC2014-MOPRO028
[n]	J. Spasic et al., “An Enhanced Quench Detection System for Main Quadrupole Magnets in the Large Hadron Collider”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2032-2035. doi:10.18429/JACoW-IPAC2018-WEPAF081
[n]	L. Krawczyk and S. Kurennoy, “Funnel Cavities for 4-MW Upgrade of Spallation Neutron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA84, pp. 3588-3590. 
[n]	M. M. Peng et al., “Optimization of a Single-Cell Accelerating Structure for Rf Breakdown Test With Short Rf Pulses”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 747-750. doi:10.18429/JACoW-NAPAC2019-WEPLM67
[n]	D. Sun et al., “Microwave Quality Assurance Effort for R&D on the Next Linear Collider at Fermilab”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH307, pp. 1198-1200. 
[n]	G. H. Rees, “Overview of Future Spallation Neutron Sources”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3731-3736. 
[n]	T. Asaka et al., “Adaptive 3-D UV-laser Pulse Shaping System to Minimize Emittance for Photocathode RF Gun”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper WEBAU01, pp. 298-305. 
[n]	M. Fouaidy, B. Aune, R. Brizzi, J. Gratadour, M. Juillard, and T. Junquera, “Thermal Model Calculations in Superconducting RF Cavities”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1304-1307. 
[n]	X. N. Gavald?á, A. D?¡az Ortiz, and L. S. Nadolski, “Multi-objective Optimization of the Linear and Non-linear Beam Dynamics of Synchrotron SOLEIL”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 388-390. doi:10.18429/JACoW-IPAC2014-MOPME007
[n]	M. B??scher et al., “Polarized Proton Beams From Laser-Induced Plasmas”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 46-51. doi:10.18429/JACoW-ICAP2018-SUPAF05
[n]	H. Ghasem, J. Alabau-Gonzalvo, F. Antoniou, S. Papadopoulou, and Y. Papaphilippou, “NONLINEAR OPTIMIZATION OF CLIC DRS NEW DESIGN WITH VARIABLE BENDS AND HIGH FIELD WIGGLERS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2416-2419. doi:10.18429/JACoW-IPAC2016-WEPMW003
[n]	I. Martini et al., “Surface Characterization at CERN of Photocathodes for Photoinjector Applications”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1703-1705. doi:10.18429/JACoW-IPAC2015-TUPJE040
[n]	S. Kawata, Y. Masubuchi, T. Sato, and T. Teramoto, “Development of Two-Dimensional Implosion Code for LIB ICF”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 706-709. 
[n]	M. Omet, A. Kuramoto, H. Hayano, T. Matsumoto, and S. Michizono, “Development and Test of a Fully Automated PkQl Control Procedure at KEK STF”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME013, pp. 2950-2952. 
[n]	Yu. A. Rogovsky et al., “Beam Measurements with Visible Synchrotron Light at VEPP-2000 Collider”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD40, pp. 140-142. 
[n]	J. Bahrdt, B. Faatz, V. Miltchev, R. Reininger, and R. Treusch, “The Properties of the FEL Output for Different Seeding Schemes”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOPPH050, pp. 150-153. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search