Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Verd??-Andr?®s et al., “Design and Prototyping of HL-LHC Double Quarter Wave Crab Cavities for SPS Test”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 64-66. doi:10.18429/JACoW-IPAC2015-MOBD2
[n] M. Canetti et al., “Design, Manufacturing and Integration of LHC Cryostat Components: an Example of a Collaboration between CERN and Industry”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH169, pp. 3191-3193.
[n] K. Fuchsberger et al., “Operational Experience during the LHC Injection Tests”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC007, pp. 468-470.
[n] H. Takebe et al., “Magnet Power Supply Control System for the SPring-8 Storage Ring - Fiber Distributed Remote I/O Systemfor VME”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1827-1830.
[n] A. T. Wu, “Surface Science Laboratory for Studying the Surfaces of Superconducting Radio Frequency Cavities”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP13, pp. 622-632.
[n] A. Vergara-Fern?índez et al., “Information Management within the LHC Hardware Commissioning Project”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP008, pp. 4791-4793.
[n] C. E. Mitchell and A. J. Dragt, “Surface Methods for the Computation of Charged-particle Transfer Maps from Magnetic Field Data”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 142-146. doi:10.18429/JACoW-ICAP2015-THBJI3
[n] C. Zanoni, G. Gobbi, D. Perini, and G. Stancari, “Preliminary Mechanical Design Study of the Hollow Electron Lens for HL-LHC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3547-3550. doi:10.18429/JACoW-IPAC2017-WEPVA117
[n] A. J. Dragt, “An Overview of Lie Methods for Accelerator Physics”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THAP1, pp. 1134-1138.
[n] F. Su et al., “Cepc Partial Double Ring Lattice Design”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3785-3787. doi:10.18429/JACoW-IPAC2016-THPOR009
[n] P. Nama et al., “Design and CW RF transmission test up to 100 kW of L-band high-power input coupler”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper MOP69, unpublished.
[n] I. Hwang, E.-S. Kim, J. Hong, Y. Morozumi, and K. Saito, “Multipacting Study of ICHIRO End Cavity”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP15, pp. XX-XX.
[n] C. Garion, I. Slits, and J.-P. G. Tock, “Installation and Quality Assurance of the Interconnections between Cryo-assemblies of the LHC Long Straight Sections”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH183, pp. 3227-3229.
[n] E. N. Schmierer et al., “Results of the APT RF Power Coupler Development for Superconducting Linacs”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH142, pp. 1110-1112.
[n] A. Andersson, O. V. Chubar, and M. Eriksson, “Beam Profile Measurements with Visible Synchrotron Light on MAX-II”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP064L, pp. 1689-1691.
[n] H.-D. Nuhn, E. T. Scharlemann, and R. Schlüter, “Alignment and Magnet Error Tolerances for the LCLS X-Ray FEL”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAA17, pp. 231-233.
[n] S. Fleury, F. Valchkova-Georgieva, J.-P. Burnet, M. Bernardini, and M. Benedikt, “FCC-ee large-scale project installation planning: challenges & proposals”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1934-1936. doi:10.18429/JACoW-IPAC2024-WECD1
[n] A. J. Dragt, “Exact Numerical Calculation of Chromaticity in Small Rings”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2627-2630.
[n] F. Valchkova-Georgieva et al., “Integration of FCC-ee RF systems targets and challenges”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3849-3852. doi:10.18429/JACoW-IPAC2024-THPS49
[n] J. H. Hong et al., “New RF-Gun Design for The PAL-XFEL”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD43, pp. 129-131.
[n] F. L. Krawczyk et al., “An Integrated Design for a Beta=0.175 Spoke Resonator and Associated Power Coupler”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEBLA003, pp. 272-274.
[n] D. Yu, A. Baxter, P. Chen, M. Lundquist, and Y. Luo, “Thermal Hydraulic Design of PWT Accelerating Structures”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE038, pp. 2524-2526.
[n] P. Merc?¿re et al., “Spatial Characterization of FEL Self-Amplified Spontaneous Emission”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEOD03, pp. 702-705.
[n] J. H. Hong et al., “Beam Measurement of Photocathode RF-gun for PAL-XFEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP011, pp. 699-702.
[n] D. Yu, A. Baxter, P. Chen, M. Lundquist, Y. Luo, and A. S. Smirnov, “An L-Band Polarized Electron PWT Photoinjector for the International Linear Collider (ILC)”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP046, pp. 2902-2904.
[n] A. Bacci, L. Faillace, and M. Rossetti Conti, “Extreme High Brightness Electron Beam Generation in a Space Charge Regime”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 314-319. doi:10.18429/JACoW-LINAC2018-TU1P01
[n] W. R. Smythe, “A Four Gap Synchrotron RF Cavity”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3517-3518.
[n] J. Wei et al., “Observation of Electron-Ion Effects at RHIC Transition”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT081, pp. 4087-4089.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Verd??-Andr?®s et al., “Design and Prototyping of HL-LHC Double Quarter Wave Crab Cavities for SPS Test”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 64-66.
- M. Canetti et al., “Design, Manufacturing and Integration of LHC Cryostat Components: an Example of a Collaboration between CERN and Industry”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH169, pp. 3191-3193.
- K. Fuchsberger et al., “Operational Experience during the LHC Injection Tests”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC007, pp. 468-470.
- H. Takebe et al., “Magnet Power Supply Control System for the SPring-8 Storage Ring - Fiber Distributed Remote I/O Systemfor VME”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1827-1830.
- A. T. Wu, “Surface Science Laboratory for Studying the Surfaces of Superconducting Radio Frequency Cavities”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper THP13, pp. 622-632.
- A. Vergara-Fern?índez et al., “Information Management within the LHC Hardware Commissioning Project”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP008, pp. 4791-4793.
- C. E. Mitchell and A. J. Dragt, “Surface Methods for the Computation of Charged-particle Transfer Maps from Magnetic Field Data”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 142-146.
- C. Zanoni, G. Gobbi, D. Perini, and G. Stancari, “Preliminary Mechanical Design Study of the Hollow Electron Lens for HL-LHC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3547-3550.
- A. J. Dragt, “An Overview of Lie Methods for Accelerator Physics”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THAP1, pp. 1134-1138.
- F. Su et al., “Cepc Partial Double Ring Lattice Design”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3785-3787.
- P. Nama et al., “Design and CW RF transmission test up to 100 kW of L-band high-power input coupler”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper MOP69, unpublished.
- I. Hwang, E.-S. Kim, J. Hong, Y. Morozumi, and K. Saito, “Multipacting Study of ICHIRO End Cavity”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP15, pp. XX-XX.
- C. Garion, I. Slits, and J.-P. G. Tock, “Installation and Quality Assurance of the Interconnections between Cryo-assemblies of the LHC Long Straight Sections”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH183, pp. 3227-3229.
- E. N. Schmierer et al., “Results of the APT RF Power Coupler Development for Superconducting Linacs”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH142, pp. 1110-1112.
- A. Andersson, O. V. Chubar, and M. Eriksson, “Beam Profile Measurements with Visible Synchrotron Light on MAX-II”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP064L, pp. 1689-1691.
- H.-D. Nuhn, E. T. Scharlemann, and R. Schlüter, “Alignment and Magnet Error Tolerances for the LCLS X-Ray FEL”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAA17, pp. 231-233.
- S. Fleury, F. Valchkova-Georgieva, J.-P. Burnet, M. Bernardini, and M. Benedikt, “FCC-ee large-scale project installation planning: challenges & proposals”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WECD1, pp. 1934-1936.
- A. J. Dragt, “Exact Numerical Calculation of Chromaticity in Small Rings”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2627-2630.
- F. Valchkova-Georgieva et al., “Integration of FCC-ee RF systems targets and challenges”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS49, pp. 3849-3852.
- J. H. Hong et al., “New RF-Gun Design for The PAL-XFEL”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper MOPD43, pp. 129-131.
- F. L. Krawczyk et al., “An Integrated Design for a Beta=0.175 Spoke Resonator and Associated Power Coupler”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEBLA003, pp. 272-274.
- D. Yu, A. Baxter, P. Chen, M. Lundquist, and Y. Luo, “Thermal Hydraulic Design of PWT Accelerating Structures”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE038, pp. 2524-2526.
- P. Merc?¿re et al., “Spatial Characterization of FEL Self-Amplified Spontaneous Emission”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEOD03, pp. 702-705.
- J. H. Hong et al., “Beam Measurement of Photocathode RF-gun for PAL-XFEL”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP011, pp. 699-702.
- D. Yu, A. Baxter, P. Chen, M. Lundquist, Y. Luo, and A. S. Smirnov, “An L-Band Polarized Electron PWT Photoinjector for the International Linear Collider (ILC)”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPP046, pp. 2902-2904.
- A. Bacci, L. Faillace, and M. Rossetti Conti, “Extreme High Brightness Electron Beam Generation in a Space Charge Regime”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 314-319.
- W. R. Smythe, “A Four Gap Synchrotron RF Cavity”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3517-3518.
- J. Wei et al., “Observation of Electron-Ion Effects at RHIC Transition”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAT081, pp. 4087-4089.
Back to search