Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Yamamoto et al., “Performance of the 1 GeV Electron Storage Ring for the Synchrotron Radiation Source at SORTEC”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 475-478.
[n] P. Sievers, R. Bellone, D. Fiander, J. Hangst, and G. Silvestrov, “Performance and Operational Experience with CERN-Lithium Lenses”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1401-1404.
[n] R. Schneider and J. Rainwater, “Nevis Synchrocyclotron Conversion Program - RF Syaytem”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 430-434.
[n] T. Chanwattana, R. Bartolini, A. Seryi, and E. Tsesmelis, “Short Pulses THz FEL for the Oxford Accelerator Science Laboratory”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2934-2936. doi:10.18429/JACoW-IPAC2014-THPRO031
[n] S. Seddon-Stettler, M. Liepe, N. Sitaraman, and T. Oseroff, “Novel materials for beam acceleration”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2730-2732. doi:10.18429/JACoW-IPAC2024-WEPS15
[n] D. L. Bruhwiler and M. F. Reusch, “Optics Simulations of the 5 MeV NPBSE FOX Telescope”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 59-62.
[n] V. Belkovets et al., “Experimental Set-up for Multiplication Coefficient Fluctuation Study vs Accelerator Parameter Deviations on the JINR Pulsed Acclerator Driven Neutron Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAC16, pp. 152-154.
[n] E. Yamakawa et al., “Study of Single Wire Scanner Monitor for FETS-FFA Test Ring”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 377-381. doi:10.18429/JACoW-IBIC2023-WEP019
[n] S. U. De Silva et al., “A Compact Beam Spreader using RF Deflecting Cavities for the LCLS-II”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2666-2668. doi:10.18429/JACoW-IPAC2014-WEPRI075
[n] H. D. Haseroth, “The CERN Heavy Ion Accelerating Facility”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPG05, pp. 411-415.
[n] R. Servranckx, “Magnetic Field Quality Requirements for PEP”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1197-1200.
[n] S. Deghaye, D. Jacquet, I. Kozsar, and J. Serrano, “OASIS: a New System to Acquire and Display the Analog Signals for LHC”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP502, pp. 359-361.
[n] R. W. Carey, K. W. Fong, R. J. Sanchez, J. D. Tappero, and J. P. Woodruff, “Large-Scale CORBA-Distributed Software Framework for NIF Controls”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAI001, pp. 425-429.
[n] J. Bardy et al., “First Operation of the LELIA Induction Accelerator at CESTA”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 670-673.
[n] A. T. Wu, Z. Insepov, and D. R. Swenson, “Modification on Surface Oxide Layer Structure and Surface Morphology of Niobium by GCIB Treatments”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO085, pp. 436-440.
[n] A. del Barrio Montañés, T. Kramer, M. Sack, and V. Senaj, “Ultra-fast generator for impact ionization triggering”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4348-4351. doi:10.18429/JACoW-IPAC2023-THPA163
[n] P. Van Vaerenbergh et al., “Stainless Steel Vacuum Chambers for the EBS Storage Ring”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 118-120. doi:10.18429/JACoW-MEDSI2018-TUPH35
[n] Y. Lin, Y. C. Huang, and A. C. Chiang and Y, “A DIAMOND CO2 LASER-DRIVEN TEST ACCELERATOR”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUCM06, pp. XX-XX.
[n] G. A. Kirby, R. Ostojic, A. J. Street, T. M. Taylor, and J. R. Treadgold, “Progress in the Construction and Testing of the 70 mm Aperture Quadrupole for the LHC Low-beta Insertions”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2271-2274.
[n] R. L. Geng and T. Goodman, “A Machine for High-Resolution Inspection of SRF Cavities at JLab”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO036, pp. 798-800.
[n] A. M. Vetter, J. L. Adamski, and W. J. Gallagher, “Beam Pipe HEM11 Probes for Traveling Wave Linac Section”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1019-1022.
[n] H. Leboutet, G. Azam, R. Bensussan, B. Delmon, J. P. Mangin, and J. Soffer, “Some Characteristic Problems of the New High Duty Cycle Saclay Electron Linac”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper VIII-06, pp. 426-434.
[n] O. A. Anderson, “Non-Matrix Analysis of AG Problems with Space Charge”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1652-1655.
[n] S. Liuzzo et al., “Scaling of hybrid multi bend lattice cells”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 394-397. doi:10.18429/JACoW-IPAC2023-MOPA144
[n] J. D. Miller et al., “Observation of Plasma Wakefield Effects During High-Current Relativistic Electron Beam Transport”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 239-242.
[n] K. P. Wootton et al., “Design and Optimisation of Dielectric Laser Deflecting Structures”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2698-2701. doi:10.18429/JACoW-IPAC2015-WEPJE012
[n] T. K. Konomi et al., “Design and Tests of a Cathode Stalk for the LCLS-II-HE Low Emittance Injector SRF Gun”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 589-592. doi:10.18429/JACoW-SRF2023-TUPTB069
[n] R. Joshel, S. Childress, C. Crawford, W. Kissel, and S. Lackey, “Automated Beam Position and Split Control for the Fermilab Switchyard”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 515-516.
[n] R. M. Hutcheon, L. D. Hansborough, K. J. Hohban, and S. O. Schriber, “RFQ Linac Structure Developments at CRNL”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3521-3524.
[n] M. G. Mazarakis et al., “Low Emittance Immersed and Non-Immersed Foilless Diodes for High Current Electron Linacs”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1002-1005.
[n] D. Prasuhn et al., “The Medium Energy Proton Synchrotron COSY”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP4B19, pp. 590-592.
[n] D. Bruno, A. Soukas, F. Toldo, and B. Lambiase, “Overview of the ATR Power Supplies”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P001, pp. 3449-3451.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Yamamoto et al., “Performance of the 1 GeV Electron Storage Ring for the Synchrotron Radiation Source at SORTEC”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 475-478.
- P. Sievers, R. Bellone, D. Fiander, J. Hangst, and G. Silvestrov, “Performance and Operational Experience with CERN-Lithium Lenses”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1401-1404.
- R. Schneider and J. Rainwater, “Nevis Synchrocyclotron Conversion Program - RF Syaytem”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 430-434.
- T. Chanwattana, R. Bartolini, A. Seryi, and E. Tsesmelis, “Short Pulses THz FEL for the Oxford Accelerator Science Laboratory”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2934-2936.
- S. Seddon-Stettler, M. Liepe, N. Sitaraman, and T. Oseroff, “Novel materials for beam acceleration”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS15, pp. 2730-2732.
- D. L. Bruhwiler and M. F. Reusch, “Optics Simulations of the 5 MeV NPBSE FOX Telescope”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 59-62.
- V. Belkovets et al., “Experimental Set-up for Multiplication Coefficient Fluctuation Study vs Accelerator Parameter Deviations on the JINR Pulsed Acclerator Driven Neutron Source”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAC16, pp. 152-154.
- E. Yamakawa et al., “Study of Single Wire Scanner Monitor for FETS-FFA Test Ring”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper WEP019, pp. 377-381.
- S. U. De Silva et al., “A Compact Beam Spreader using RF Deflecting Cavities for the LCLS-II”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2666-2668.
- H. D. Haseroth, “The CERN Heavy Ion Accelerating Facility”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPG05, pp. 411-415.
- R. Servranckx, “Magnetic Field Quality Requirements for PEP”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1197-1200.
- S. Deghaye, D. Jacquet, I. Kozsar, and J. Serrano, “OASIS: a New System to Acquire and Display the Analog Signals for LHC”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP502, pp. 359-361.
- R. W. Carey, K. W. Fong, R. J. Sanchez, J. D. Tappero, and J. P. Woodruff, “Large-Scale CORBA-Distributed Software Framework for NIF Controls”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAI001, pp. 425-429.
- J. Bardy et al., “First Operation of the LELIA Induction Accelerator at CESTA”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 670-673.
- A. T. Wu, Z. Insepov, and D. R. Swenson, “Modification on Surface Oxide Layer Structure and Surface Morphology of Niobium by GCIB Treatments”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO085, pp. 436-440.
- A. del Barrio Montañés, T. Kramer, M. Sack, and V. Senaj, “Ultra-fast generator for impact ionization triggering”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA163, pp. 4348-4351.
- P. Van Vaerenbergh et al., “Stainless Steel Vacuum Chambers for the EBS Storage Ring”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 118-120.
- Y. Lin, Y. C. Huang, and A. C. Chiang and Y, “A DIAMOND CO2 LASER-DRIVEN TEST ACCELERATOR”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUCM06, pp. XX-XX.
- G. A. Kirby, R. Ostojic, A. J. Street, T. M. Taylor, and J. R. Treadgold, “Progress in the Construction and Testing of the 70 mm Aperture Quadrupole for the LHC Low-beta Insertions”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2271-2274.
- R. L. Geng and T. Goodman, “A Machine for High-Resolution Inspection of SRF Cavities at JLab”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THPO036, pp. 798-800.
- A. M. Vetter, J. L. Adamski, and W. J. Gallagher, “Beam Pipe HEM11 Probes for Traveling Wave Linac Section”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1019-1022.
- H. Leboutet, G. Azam, R. Bensussan, B. Delmon, J. P. Mangin, and J. Soffer, “Some Characteristic Problems of the New High Duty Cycle Saclay Electron Linac”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper VIII-06, pp. 426-434.
- O. A. Anderson, “Non-Matrix Analysis of AG Problems with Space Charge”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1652-1655.
- S. Liuzzo et al., “Scaling of hybrid multi bend lattice cells”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA144, pp. 394-397.
- J. D. Miller et al., “Observation of Plasma Wakefield Effects During High-Current Relativistic Electron Beam Transport”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 239-242.
- K. P. Wootton et al., “Design and Optimisation of Dielectric Laser Deflecting Structures”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2698-2701.
- T. K. Konomi et al., “Design and Tests of a Cathode Stalk for the LCLS-II-HE Low Emittance Injector SRF Gun”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB069, pp. 589-592.
- R. Joshel, S. Childress, C. Crawford, W. Kissel, and S. Lackey, “Automated Beam Position and Split Control for the Fermilab Switchyard”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 515-516.
- R. M. Hutcheon, L. D. Hansborough, K. J. Hohban, and S. O. Schriber, “RFQ Linac Structure Developments at CRNL”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3521-3524.
- M. G. Mazarakis et al., “Low Emittance Immersed and Non-Immersed Foilless Diodes for High Current Electron Linacs”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1002-1005.
- D. Prasuhn et al., “The Medium Energy Proton Synchrotron COSY”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP4B19, pp. 590-592.
- D. Bruno, A. Soukas, F. Toldo, and B. Lambiase, “Overview of the ATR Power Supplies”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P001, pp. 3449-3451.
Back to search