Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. V. Hoover, “Grid-Controlled Power Tubes in Particle-Accelerator Applications”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 76-86.
[n] S. A. K. Wijethunga, J. S. Eldred, E. Pozdeyev, and C.-Y. Tan, “Electron Cloud Measurements in Fermilab Booster”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 556-559. doi:10.18429/JACoW-NAPAC2022-WEXD6
[n] G. J. Hirst, S. P. Jamison, L. B. Jones, A. J. Moss, and P. J. Phillips, “Timing and Synchronisation Considerations for the NLS Project”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper FROA04, pp. 776-779.
[n] F. J. Decker et al., “Measured Emittance versus Store Time in the SLC Damping Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 342-345.
[n] V. O. Kostroun and C. M. Gulliford, “Radiation Limits on Permanent Magnets in CBETA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 745-747. doi:10.18429/JACoW-IPAC2019-MOPRB075
[n] B. P. Xiao, M. Blaskiewicz, and T. Xin, “Anomalous Skin Effect Study of Normal Conducting Film”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1119-1121. doi:10.18429/JACoW-IPAC2021-MOPAB360
[n] J. Pfingstner, M. Hofbaur, and D. Schulte, “Adaptive Scheme for the CLIC Orbit Feedback”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB040, pp. 2776-2778.
[n] J. W. Wang and G. A. Loew, “Measurements of Ultimate Accelerating Gradients in the SLAC Disk-Loaded Structure”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2915-2918.
[n] M. K. Craddock, “Critical Beam-Intensity Issues in Cyclotrons - Overview of the Santa Fe Workshop”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper E-02, pp. 377-380.
[n] M. Sapinski, B. Dehning, and A. Priebe, “LHC Beam Loss Measurements and Quench Level Abort Threshold Accuracy”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB069, pp. 2854-2856.
[n] M. Re et al., “Production of Inorganic Thin Scintillating Films for Ion Beam Monitoring Devices”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT002, pp. 808-810.
[n] J. A. Clarke, J. N. Corlett, M. W. Poole, S. L. Smith, V. P. Suller, and L. A. Welbourne, “The Linear Latticed Design of an Advanced VUV/SXR Photon Source for Daresbury”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 679-682.
[n] M. Menna, G. Cuttone, and M. Re, “Production of Radioactive Ion Beams for the EXCYT Facility”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT060, pp. 1291-1293.
[n] Z. Duan, N. Wang, and H. S. Xu, “Simulations of the Injection Transient Instabilities for the High Energy Photon Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1524-1527. doi:10.18429/JACoW-IPAC2019-TUPGW053
[n] P. Bertrand and A. Savalle, “Post-acceleration of High Intensity RIB through the CIME Cyclotron in the Frame of the SPIRAL2 Project at GANIL”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper THM1CIO01, pp. 354-358.
[n] O. I. Meshkov et al., “Experimental Comparison of Performance of Various Fluorescent Screens Applied for Relativistic Electron/Positron Beam Imaging”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper WEOB02, pp. 558-560.
[n] S. Schriber, “Survey of Proposed High Intensity Accelerators and their Applications”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 213-218.
[n] R. M. Franks, K. Hernandez, D. Otting, T. Henderson, D. Plate, and R. A. Rimmer, “Mechanical Design and Fabrication Processes for the ALS Third-Harmonic Cavities”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP61, pp. 803-805.
[n] M. Ferianis, S. Bassanese, G. D'Auria, C. Deibele, and M. Poggi, “Characterisation of Fast Faraday Cups at the ELETTRA Linac”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PM10, pp. XX-XX.
[n] M. Vogt et al., “The FLASH 2020+ Upgrade Project”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 354-360. doi:10.18429/JACoW-SRF2023-TUIAA02
[n] O. Kugeler, W. Anders, J. Knobloch, and A. Neumann, “Improving the Intrinsic Quality Factor of SRF Cavities by Thermal Cycling”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO011, pp. 724-727.
[n] R. Ferdinand, J.-M. Lagniel, P. Mattei, and S. Nath, “Optimization of RFQ Design”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP23G, pp. 1106-1108.
[n] G. W??stefeld et al., “Coherent THz Measurements at the Metrology Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA015, pp. 2508-2510.
[n] B. Autin and Ph. Royer, “Optimum Optical Systems”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP7B01, pp. 1396-1398.
[n] N. Ueda et al., “Development of RFQ Linacs for Heavy Ions”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOB0009, pp. 71-73.
[n] F. M. Velotti et al., “Performance Improvements of the SPS Internal Beam Dump for the HL-LHC Beam”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA041, pp. 3231-3233.
[n] C. Gardner, Y. Y. Lee, N. Tsoupas, and J. Wei, “FODO/Doublet Lattice for the SNS Accumulator Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B12, pp. 978-980.
[n] J. Simpson, F. Cole, J. Norem, A. G. Ruggiero, and P. Schoessow, “Measurement Facility for New Acceleration Techniques”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3492-3494.
[n] C. Chu et al., “Application Programming Structure and Physics Applications”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE015, pp. 2360-2362.
[n] M. Re et al., “The Production of Negative Lithium Beams by Charge Exchange in Cesium Vapours”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE004, pp. 898-900.
[n] A. Ogata et al., “Plasma Wakefield Accelerator Experiments in KEK”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 618-621.
[n] L. Sanchez-Chopitea, P. Emma, and D. Van Olst, “Orbit Monitoring in the SLC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1284-1287.
[n] A. Mishin, “Status of ABC production line at Varex Imaging Corporation”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3687-3689. doi:10.18429/JACoW-IPAC2024-THPR73
[n] V. I. Shvedunov, H. Euteneuer, and K.-H. Kaiser, “Bunch Space Charge Limits in an RTM”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8V035, pp. 1902-1904.
[n] S. Ahmed et al., “Beam Dynamics Studies of Parallel-Bar Deflecting Cavities”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUODN3, pp. 790-792.
[n] M. V. Fazio and R. D. Patton, “High Power Testing of the Multiple-Loop Radiofrequency Drive Concept for the FMIT Accelerator”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0034, pp. 183-185.
For LaTeX
Use Complete Form
For BibTeX
References
- M. V. Hoover, “Grid-Controlled Power Tubes in Particle-Accelerator Applications”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 76-86.
- S. A. K. Wijethunga, J. S. Eldred, E. Pozdeyev, and C.-Y. Tan, “Electron Cloud Measurements in Fermilab Booster”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 556-559.
- G. J. Hirst, S. P. Jamison, L. B. Jones, A. J. Moss, and P. J. Phillips, “Timing and Synchronisation Considerations for the NLS Project”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper FROA04, pp. 776-779.
- F. J. Decker et al., “Measured Emittance versus Store Time in the SLC Damping Ring”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 342-345.
- V. O. Kostroun and C. M. Gulliford, “Radiation Limits on Permanent Magnets in CBETA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 745-747.
- B. P. Xiao, M. Blaskiewicz, and T. Xin, “Anomalous Skin Effect Study of Normal Conducting Film”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1119-1121.
- J. Pfingstner, M. Hofbaur, and D. Schulte, “Adaptive Scheme for the CLIC Orbit Feedback”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB040, pp. 2776-2778.
- J. W. Wang and G. A. Loew, “Measurements of Ultimate Accelerating Gradients in the SLAC Disk-Loaded Structure”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2915-2918.
- M. K. Craddock, “Critical Beam-Intensity Issues in Cyclotrons - Overview of the Santa Fe Workshop”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper E-02, pp. 377-380.
- M. Sapinski, B. Dehning, and A. Priebe, “LHC Beam Loss Measurements and Quench Level Abort Threshold Accuracy”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB069, pp. 2854-2856.
- M. Re et al., “Production of Inorganic Thin Scintillating Films for Ion Beam Monitoring Devices”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT002, pp. 808-810.
- J. A. Clarke, J. N. Corlett, M. W. Poole, S. L. Smith, V. P. Suller, and L. A. Welbourne, “The Linear Latticed Design of an Advanced VUV/SXR Photon Source for Daresbury”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 679-682.
- M. Menna, G. Cuttone, and M. Re, “Production of Radioactive Ion Beams for the EXCYT Facility”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT060, pp. 1291-1293.
- Z. Duan, N. Wang, and H. S. Xu, “Simulations of the Injection Transient Instabilities for the High Energy Photon Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1524-1527.
- P. Bertrand and A. Savalle, “Post-acceleration of High Intensity RIB through the CIME Cyclotron in the Frame of the SPIRAL2 Project at GANIL”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper THM1CIO01, pp. 354-358.
- O. I. Meshkov et al., “Experimental Comparison of Performance of Various Fluorescent Screens Applied for Relativistic Electron/Positron Beam Imaging”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper WEOB02, pp. 558-560.
- S. Schriber, “Survey of Proposed High Intensity Accelerators and their Applications”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 213-218.
- R. M. Franks, K. Hernandez, D. Otting, T. Henderson, D. Plate, and R. A. Rimmer, “Mechanical Design and Fabrication Processes for the ALS Third-Harmonic Cavities”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP61, pp. 803-805.
- M. Ferianis, S. Bassanese, G. D'Auria, C. Deibele, and M. Poggi, “Characterisation of Fast Faraday Cups at the ELETTRA Linac”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PM10, pp. XX-XX.
- M. Vogt et al., “The FLASH 2020+ Upgrade Project”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUIAA02, pp. 354-360.
- O. Kugeler, W. Anders, J. Knobloch, and A. Neumann, “Improving the Intrinsic Quality Factor of SRF Cavities by Thermal Cycling”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THPO011, pp. 724-727.
- R. Ferdinand, J.-M. Lagniel, P. Mattei, and S. Nath, “Optimization of RFQ Design”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP23G, pp. 1106-1108.
- G. W??stefeld et al., “Coherent THz Measurements at the Metrology Light Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA015, pp. 2508-2510.
- B. Autin and Ph. Royer, “Optimum Optical Systems”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP7B01, pp. 1396-1398.
- N. Ueda et al., “Development of RFQ Linacs for Heavy Ions”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper MOB0009, pp. 71-73.
- F. M. Velotti et al., “Performance Improvements of the SPS Internal Beam Dump for the HL-LHC Beam”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA041, pp. 3231-3233.
- C. Gardner, Y. Y. Lee, N. Tsoupas, and J. Wei, “FODO/Doublet Lattice for the SNS Accumulator Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2B12, pp. 978-980.
- J. Simpson, F. Cole, J. Norem, A. G. Ruggiero, and P. Schoessow, “Measurement Facility for New Acceleration Techniques”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3492-3494.
- C. Chu et al., “Application Programming Structure and Physics Applications”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE015, pp. 2360-2362.
- M. Re et al., “The Production of Negative Lithium Beams by Charge Exchange in Cesium Vapours”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE004, pp. 898-900.
- A. Ogata et al., “Plasma Wakefield Accelerator Experiments in KEK”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 618-621.
- L. Sanchez-Chopitea, P. Emma, and D. Van Olst, “Orbit Monitoring in the SLC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1284-1287.
- A. Mishin, “Status of ABC production line at Varex Imaging Corporation”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR73, pp. 3687-3689.
- V. I. Shvedunov, H. Euteneuer, and K.-H. Kaiser, “Bunch Space Charge Limits in an RTM”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8V035, pp. 1902-1904.
- S. Ahmed et al., “Beam Dynamics Studies of Parallel-Bar Deflecting Cavities”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUODN3, pp. 790-792.
- M. V. Fazio and R. D. Patton, “High Power Testing of the Multiple-Loop Radiofrequency Drive Concept for the FMIT Accelerator”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0034, pp. 183-185.
Back to search