Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Sulc, A. Eichler, and T. Wilksen, “A Data-Driven Anomaly Detection on SRF Cavities at the European XFEL”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1152-1155. doi:10.18429/JACoW-IPAC2022-TUPOPT062
[n] S. V. Golubev, V. G. Zorin, G. G. Gulbekian, and V. B. Kutner, “Gyrotron Pumped ECR Source of Multi-Charged Ions Built in a Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper F-09, pp. 427-429.
[n] A. Eichler et al., “First Steps Toward an Autonomous Accelerator, a Common Project Between DESY and KIT”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2182-2185. doi:10.18429/JACoW-IPAC2021-TUPAB298
[n] P. Nonn, A. Eichler, S. Pfeiffer, H. Schlarb, and J. H. K. Timm, “Providing Computing Power for High Level Controllers in MicroTCA-based LLRF Systems via PCI Express Extension”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4363-4365. doi:10.18429/JACoW-IPAC2021-THPAB287
[n] Z. Zaharieva and M. Buttner, “CERN Alarms Data Management: State & Improvements”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN011, pp. 110-113.
[n] Z. C. Chen and Y. B. Leng, “Bunch-by-Bunch Study of the Transient State of Injection at the SSRF”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 396-398. doi:10.18429/JACoW-IBIC2015-TUPB035
[n] A. Glazov, V. Krasnopolsky, R. Meshcherov, and V. Masalov, “Pulsed Ion Sources of Duoplasmatron Type with Cold and Hot Cathodes”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPC13, pp. 1025-1026.
[n] G. D. Wait, M. J. Barnes, D. Fiander, C. Figley, V. Roedel, and G. Waters, “A 1 MHz Beam Chopper for the Kaon Factory”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1278-1281.
[n] Z. Makonnen, M. Buttner, and Z. Zaharieva, “Challenges to Providing a Successful Central Configuration Service to Support CERN's New Controls Diagnostics and Monitoring System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC024, pp. 596-599.
[n] C. Adolphsen et al., “Wakefield and Beam Centering Measurements of a Damped and Detuned X-Band Accelerator Structure”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA40, pp. 3477-3479.
[n] S. V. Kuzikov, S. Yu. Kazakov, M. E. Plotkin, and J. L. Hirshfield, “HIGH-GRADIENT TWO-BEAM ACCELERATING STRUCTURE”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEAPH08, pp. XX-XX.
[n] K. Anderson, C. M. Bhat, J. Marriner, and Z. Tang, “An Antiproton Target Design for Increased Beam Intensity”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1946-1949.
[n] R. Cassel and M. Nguyen, “Kicker Pulser Charger”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3147-3150.
[n] M. J. Barnes and G. D. Wait, “Design and Measurements of a Damping Ring Kicker for the ILC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOAC01, pp. 846-848.
[n] D. Lacoste et al., “New Developements on HDB++, the High-performance Data Archiving for Tango Controls”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1190-1194. doi:10.18429/JACoW-ICALEPCS2023-THMBCMO01
[n] S. V. Kuzikov and M. E. Plotkin, “Multi-Mode Accelerating Structure with High Filling Factor”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP068, pp. 2952-2954.
[n] I. Bolotin, V. Budilin, A. Glazov, V. Krasnopolsky, and V. Skuratov, “Ferromagentic Cores Made from Amorphous Material for Broad-Band Accelerating System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR19, pp. 1833-1834.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Sulc, A. Eichler, and T. Wilksen, “A Data-Driven Anomaly Detection on SRF Cavities at the European XFEL”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1152-1155.
- S. V. Golubev, V. G. Zorin, G. G. Gulbekian, and V. B. Kutner, “Gyrotron Pumped ECR Source of Multi-Charged Ions Built in a Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper F-09, pp. 427-429.
- A. Eichler et al., “First Steps Toward an Autonomous Accelerator, a Common Project Between DESY and KIT”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2182-2185.
- P. Nonn, A. Eichler, S. Pfeiffer, H. Schlarb, and J. H. K. Timm, “Providing Computing Power for High Level Controllers in MicroTCA-based LLRF Systems via PCI Express Extension”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4363-4365.
- Z. Zaharieva and M. Buttner, “CERN Alarms Data Management: State & Improvements”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN011, pp. 110-113.
- Z. C. Chen and Y. B. Leng, “Bunch-by-Bunch Study of the Transient State of Injection at the SSRF”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 396-398.
- A. Glazov, V. Krasnopolsky, R. Meshcherov, and V. Masalov, “Pulsed Ion Sources of Duoplasmatron Type with Cold and Hot Cathodes”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPC13, pp. 1025-1026.
- G. D. Wait, M. J. Barnes, D. Fiander, C. Figley, V. Roedel, and G. Waters, “A 1 MHz Beam Chopper for the Kaon Factory”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1278-1281.
- Z. Makonnen, M. Buttner, and Z. Zaharieva, “Challenges to Providing a Successful Central Configuration Service to Support CERN's New Controls Diagnostics and Monitoring System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC024, pp. 596-599.
- C. Adolphsen et al., “Wakefield and Beam Centering Measurements of a Damped and Detuned X-Band Accelerator Structure”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA40, pp. 3477-3479.
- S. V. Kuzikov, S. Yu. Kazakov, M. E. Plotkin, and J. L. Hirshfield, “HIGH-GRADIENT TWO-BEAM ACCELERATING STRUCTURE”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WEAPH08, pp. XX-XX.
- K. Anderson, C. M. Bhat, J. Marriner, and Z. Tang, “An Antiproton Target Design for Increased Beam Intensity”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1946-1949.
- R. Cassel and M. Nguyen, “Kicker Pulser Charger”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3147-3150.
- M. J. Barnes and G. D. Wait, “Design and Measurements of a Damping Ring Kicker for the ILC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUOAC01, pp. 846-848.
- D. Lacoste et al., “New Developements on HDB++, the High-performance Data Archiving for Tango Controls”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THMBCMO01, pp. 1190-1194.
- S. V. Kuzikov and M. E. Plotkin, “Multi-Mode Accelerating Structure with High Filling Factor”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP068, pp. 2952-2954.
- I. Bolotin, V. Budilin, A. Glazov, V. Krasnopolsky, and V. Skuratov, “Ferromagentic Cores Made from Amorphous Material for Broad-Band Accelerating System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPR19, pp. 1833-1834.
Back to search
