Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Sertore et al., “Basis for the Reliability Analysis of the Proton Linac for an ADS Program”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG034, pp. 1506-1508.
[n] M. Ferrario, J. Sekutowicz, and Ch. Tang, “Superconducting Superstructure for the TESLA Collider”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP46C, pp. 1876-1878.
[n] H. Suk, C. Kim, G. H. Kim, J. U. Kim, and H. J. Lee, “Electron Acceleration by Laser Wakefields in Tapered Plasma Densities”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG049, pp. 1912-1914.
[n] D. S. Hung, C. I. Chen, C. H. Kuo, and Y. C. Lo, “Electron Beam Motion Observed in Infrared Synchrotron Radiation at NSRRC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG028, pp. 3234-3236.
[n] K. W. Seo, A. H. Maeng, S. C. Lee, and I. S. Ko, “Precision Surveying and Smoothing Analysis for Pohang Light Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P069, pp. 3663-3665.
[n] W. H. C. Theuws, J. I. M. Botman, H. L. Hagedoorn, and A. F. J. Hammen, “Tuning Possibilities of the Longitudinal Beam Shape of a Racetrack Microtron”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA102, pp. 2825-2827.
[n] A. Jason, B. Blind, and E. Svaton, “Uniform Ribbon-Beam Generation for Accelerator Production of Tritium”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-58, pp. 192-195.
[n] V. L. Auslender et al., “TRIODE RF GUN FOR LINEAR ELECTRON ACCELERATORS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHP28, pp. XX-XX.
[n] L. M. Earley, J. M. Potter, and A. J. Thomas, “Tuning Experience with FMIT Scale-Model Drift-Tube Linac”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B14, pp. 74-76.
[n] V. D. Burlakov et al., “Status of the Construction of the INR Meson Factory”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOA0002, pp. 9-13.
[n] R. Nawrocky et al., “An Active Interlock System for the NSLS X-Ray Ring Insertion Devices”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2790-2793.
[n] E. L. Wright and H. P. Bohlen, “Modeling and Simulation Results of High-power HOM IOTs”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH167, pp. 0-3645.
[n] E. R. Gray and G. Spalek, “Power Coupler and Cold Window for Seven-Cell Superconducting Cavity Vertical Test”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-49, pp. 450-452.
[n] C. Pagani et al., “Status of the High Energy SC Linac for the TRASCO Program”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH304, pp. 3612-3614.
[n] S. Jacobsen, G. Molinari, and H. Mulder, “A Feedback System to Control the Flux during Ultra Slow Extraction at LEAR”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP014L, pp. 1845-1847.
[n] J. C. Smith, L. Keller, S. A. Lundgren, and T. W. Markiewicz, “Construction and Bench Testing of a Rotatable Collimator for the LHC Collimation Upgrade”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB078, pp. 1701-1703.
[n] K. Suganuma, K. Fujirai, M. Kinsho, P. K. Saha, and Y. Yamazaki, “Operating Experience of Water Cooling System in the J-PARC LINAC and RCS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2203-2205. doi:10.18429/JACoW-IPAC2018-WEPAL022
[n] Q. A. Kerns, J. E. Katz, and G. S. Tool, “Ferrite Measurements for Synchrotron RF Accelerating System Design”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 185-191.
[n] J. Hoover, S. Orr, J. Ryk, and A. T. Visser, “Power for the FermilabTevatron Helium Liquefier”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3938-3941.
[n] L. Burnod and E. D, “New Methods to Correct On-Line the Closed Orbit of a Synchrotron Accelerator with Variable Focusing Configuration”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2284-2287.
[n] J. H. Kelly, “Engineering Challenges of the VMXi Beamline”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 304-308. doi:10.18429/JACoW-MEDSI2016-WECA07
[n] D. Cook, J. Clare, J. S. Przybyla, and P. W. Wheeler, “Design of A Direct Power Converter for High Power RF Applications”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN083, pp. 2221-2223.
[n] J. Shi, L. Jin, D. Wang, and F. Wang, “Beam-Beam Effects in the Ring-Ring Version of eRHIC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP017, pp. 1520-1522.
[n] L. H. Chang, W. K. Lau, M. C. Lin, and T. T. Yang, “Development of the RF Kicker for the Longitudinal Feedback System at SRRC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP42C, pp. 1708-1710.
[n] M. Nomura et al., “Status of High Power CW Linac at PNC”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 745-748.
[n] K. C. Harkay, V. Sajaev, and B. X. Yang, “Transverse Multibunch Bursting Instability in the APS Storage Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN110, pp. 4360-4362.
[n] A. Bogomyagkov et al., “VEPP-4M Operation at Low Energy”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THM204, pp. XX-XX.
[n] K. J. Beczek, J. W. Lewellen, A. Nassiri, and E. Tanabe, “A Rationalized Approach to Thermionic RF Gun Design”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH052, pp. 2206-2208.
[n] A. Novokhatski, F.-J. Decker, R. O. Hettel, Z. Huang, H.-D. Nuhn, and M. K. Sullivan, “Coherent X-Ray Seeding Source for Driving FELs”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEPSO11, pp. 522-524.
[n] T. Atkinson, P. Goslawski, J. G. Hwang, M. Ries, T. Flisgen, and T. Mertens, “VSR Injector Upgrade at BESSY II”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4110-4113. doi:10.18429/JACoW-IPAC2018-THPMF030
[n] J. Gioia et al., “A Room Temperature Test Bed for Evaluating 700-MHz RF Windows and Power Couplers for the Superconducting Cavities of the APT Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA137, pp. 1396-1398.
[n] A. Balabaev et al., “Laser Source of Highly-Charged Ions for ITEP TeraWatt Accumulator Facility”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3A01, pp. 551-553.
[n] J. Nudell, H. Cease, J. T. Collins, Z. Liu, and C. A. Preissner, “Preliminary Design and Analysis of the FODO Module Support System for the APS-U Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 83-86. doi:10.18429/JACoW-MEDSI2016-MOPE32
[n] E. Higgins, Q. Kerns, H. Miller, B. Prichard, R. Stiening, and G. Tool, “The Fermilab Transverse Instability Active Damping System”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1473-1475.
[n] J. Chavanne, P. Elleaume, and P. Van Vaerenbergh, “Recent Developments of Insertion Devices at ESRF”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P026, pp. 3506-3508.
[n] S. Tantawi et al., “Studies of an X-Band Three-Cavity Gyroklystron with Penultimate Cavity Tuning”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 731-734.
[n] S. Artinian, J. F. Bergoz, F. Stulle, P. Pollet, and V. Schlott, “Development and First Tests of a High Sensitivity Charge Monitor for SwissFEL”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPB87, pp. 287-290.
[n] M. J. Boland, T. M. Mitsuhashi, T. Naito, and K. P. Wootton, “Intensity Imbalance Optical Interferometer Beam Size Monitor”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper WECC03, pp. 566-570.
[n] V. Tioukine, K. Aulenbacher, H. Euteneuer, K.-H. Kaiser, and S. Ratschow, “Spin Manipulation at MAMI - C”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO022, pp. 1816-1818.
[n] Y. Bao, X. Li, Y. Li, Y. P. Song, and X. Tong, “High-Quality Muon Beam Production Based on Superconducting Solenoids”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 630-632. doi:10.18429/JACoW-IPAC2019-MOPRB026
[n] C. Rodrigues et al., “Overview of Sirius Power Supply System”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1230-1232. doi:10.18429/JACoW-IPAC2019-TUPMP002
[n] M. Champion et al., “The Spallation Neutron Source Accelerator Low Level RF Control System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB038, pp. 3377-3379.
[n] V. Rapp and W. Sliwinski, “Controls Middleware for FAIR”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WCO102, pp. 4-6.
[n] A. H. Lumpkin, C. A. Brau, J. S. Fraser, and R. W. Warren, “Time-Resolved Electron Beam Diagnostics for the Los Alamos Free-Electron Laser Oscillator Experiment”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3139-3142.
[n] C. Ohmori et al., “High Field Gradient Cavity for J-PARC 3 GeV RCS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEOACH01, pp. 123-125.
[n] N. G. Wyles, J. Jones, H. L. Owen, and J. A. Varley, “DIAMOND Storage Ring Apertures”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE004, pp. 781-783.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Sertore et al., “Basis for the Reliability Analysis of the Proton Linac for an ADS Program”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG034, pp. 1506-1508.
- M. Ferrario, J. Sekutowicz, and Ch. Tang, “Superconducting Superstructure for the TESLA Collider”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP46C, pp. 1876-1878.
- H. Suk, C. Kim, G. H. Kim, J. U. Kim, and H. J. Lee, “Electron Acceleration by Laser Wakefields in Tapered Plasma Densities”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPG049, pp. 1912-1914.
- D. S. Hung, C. I. Chen, C. H. Kuo, and Y. C. Lo, “Electron Beam Motion Observed in Infrared Synchrotron Radiation at NSRRC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG028, pp. 3234-3236.
- K. W. Seo, A. H. Maeng, S. C. Lee, and I. S. Ko, “Precision Surveying and Smoothing Analysis for Pohang Light Source”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7P069, pp. 3663-3665.
- W. H. C. Theuws, J. I. M. Botman, H. L. Hagedoorn, and A. F. J. Hammen, “Tuning Possibilities of the Longitudinal Beam Shape of a Racetrack Microtron”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA102, pp. 2825-2827.
- A. Jason, B. Blind, and E. Svaton, “Uniform Ribbon-Beam Generation for Accelerator Production of Tritium”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-58, pp. 192-195.
- V. L. Auslender et al., “TRIODE RF GUN FOR LINEAR ELECTRON ACCELERATORS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WEHP28, pp. XX-XX.
- L. M. Earley, J. M. Potter, and A. J. Thomas, “Tuning Experience with FMIT Scale-Model Drift-Tube Linac”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B14, pp. 74-76.
- V. D. Burlakov et al., “Status of the Construction of the INR Meson Factory”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper MOA0002, pp. 9-13.
- R. Nawrocky et al., “An Active Interlock System for the NSLS X-Ray Ring Insertion Devices”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2790-2793.
- E. L. Wright and H. P. Bohlen, “Modeling and Simulation Results of High-power HOM IOTs”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH167, pp. 0-3645.
- E. R. Gray and G. Spalek, “Power Coupler and Cold Window for Seven-Cell Superconducting Cavity Vertical Test”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-49, pp. 450-452.
- C. Pagani et al., “Status of the High Energy SC Linac for the TRASCO Program”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH304, pp. 3612-3614.
- S. Jacobsen, G. Molinari, and H. Mulder, “A Feedback System to Control the Flux during Ultra Slow Extraction at LEAR”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP014L, pp. 1845-1847.
- J. C. Smith, L. Keller, S. A. Lundgren, and T. W. Markiewicz, “Construction and Bench Testing of a Rotatable Collimator for the LHC Collimation Upgrade”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB078, pp. 1701-1703.
- K. Suganuma, K. Fujirai, M. Kinsho, P. K. Saha, and Y. Yamazaki, “Operating Experience of Water Cooling System in the J-PARC LINAC and RCS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2203-2205.
- Q. A. Kerns, J. E. Katz, and G. S. Tool, “Ferrite Measurements for Synchrotron RF Accelerating System Design”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 185-191.
- J. Hoover, S. Orr, J. Ryk, and A. T. Visser, “Power for the FermilabTevatron Helium Liquefier”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3938-3941.
- L. Burnod and E. D, “New Methods to Correct On-Line the Closed Orbit of a Synchrotron Accelerator with Variable Focusing Configuration”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2284-2287.
- J. H. Kelly, “Engineering Challenges of the VMXi Beamline”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 304-308.
- D. Cook, J. Clare, J. S. Przybyla, and P. W. Wheeler, “Design of A Direct Power Converter for High Power RF Applications”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN083, pp. 2221-2223.
- J. Shi, L. Jin, D. Wang, and F. Wang, “Beam-Beam Effects in the Ring-Ring Version of eRHIC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP017, pp. 1520-1522.
- L. H. Chang, W. K. Lau, M. C. Lin, and T. T. Yang, “Development of the RF Kicker for the Longitudinal Feedback System at SRRC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP42C, pp. 1708-1710.
- M. Nomura et al., “Status of High Power CW Linac at PNC”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 745-748.
- K. C. Harkay, V. Sajaev, and B. X. Yang, “Transverse Multibunch Bursting Instability in the APS Storage Ring”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN110, pp. 4360-4362.
- A. Bogomyagkov et al., “VEPP-4M Operation at Low Energy”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THM204, pp. XX-XX.
- K. J. Beczek, J. W. Lewellen, A. Nassiri, and E. Tanabe, “A Rationalized Approach to Thermionic RF Gun Design”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH052, pp. 2206-2208.
- A. Novokhatski, F.-J. Decker, R. O. Hettel, Z. Huang, H.-D. Nuhn, and M. K. Sullivan, “Coherent X-Ray Seeding Source for Driving FELs”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper WEPSO11, pp. 522-524.
- T. Atkinson, P. Goslawski, J. G. Hwang, M. Ries, T. Flisgen, and T. Mertens, “VSR Injector Upgrade at BESSY II”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4110-4113.
- J. Gioia et al., “A Room Temperature Test Bed for Evaluating 700-MHz RF Windows and Power Couplers for the Superconducting Cavities of the APT Linac”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA137, pp. 1396-1398.
- A. Balabaev et al., “Laser Source of Highly-Charged Ions for ITEP TeraWatt Accumulator Facility”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP3A01, pp. 551-553.
- J. Nudell, H. Cease, J. T. Collins, Z. Liu, and C. A. Preissner, “Preliminary Design and Analysis of the FODO Module Support System for the APS-U Storage Ring”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 83-86.
- E. Higgins, Q. Kerns, H. Miller, B. Prichard, R. Stiening, and G. Tool, “The Fermilab Transverse Instability Active Damping System”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1473-1475.
- J. Chavanne, P. Elleaume, and P. Van Vaerenbergh, “Recent Developments of Insertion Devices at ESRF”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P026, pp. 3506-3508.
- S. Tantawi et al., “Studies of an X-Band Three-Cavity Gyroklystron with Penultimate Cavity Tuning”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 731-734.
- S. Artinian, J. F. Bergoz, F. Stulle, P. Pollet, and V. Schlott, “Development and First Tests of a High Sensitivity Charge Monitor for SwissFEL”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPB87, pp. 287-290.
- M. J. Boland, T. M. Mitsuhashi, T. Naito, and K. P. Wootton, “Intensity Imbalance Optical Interferometer Beam Size Monitor”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper WECC03, pp. 566-570.
- V. Tioukine, K. Aulenbacher, H. Euteneuer, K.-H. Kaiser, and S. Ratschow, “Spin Manipulation at MAMI - C”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO022, pp. 1816-1818.
- Y. Bao, X. Li, Y. Li, Y. P. Song, and X. Tong, “High-Quality Muon Beam Production Based on Superconducting Solenoids”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 630-632.
- C. Rodrigues et al., “Overview of Sirius Power Supply System”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1230-1232.
- M. Champion et al., “The Spallation Neutron Source Accelerator Low Level RF Control System”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB038, pp. 3377-3379.
- V. Rapp and W. Sliwinski, “Controls Middleware for FAIR”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WCO102, pp. 4-6.
- A. H. Lumpkin, C. A. Brau, J. S. Fraser, and R. W. Warren, “Time-Resolved Electron Beam Diagnostics for the Los Alamos Free-Electron Laser Oscillator Experiment”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3139-3142.
- C. Ohmori et al., “High Field Gradient Cavity for J-PARC 3 GeV RCS”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEOACH01, pp. 123-125.
- N. G. Wyles, J. Jones, H. L. Owen, and J. A. Varley, “DIAMOND Storage Ring Apertures”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE004, pp. 781-783.
Back to search