JaCoW Logo

Reference Search

Favourites


For Word

[n]	H. Wang, J. Delayen, L. Harwood, C. Hovater, and R. Nelson, “JLAB High Efficiency Klystron Baseline Design for 12 GeV Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE010, pp. 1098-1100. 
[n]	K. Saito et al., “Superiority of Electropolishing over Chemical Polishing on High Gradients”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D02, pp. 795-813. 
[n]	D. Kaltchev, M. K. Craddock, and R. V. Servranckx, “Racetrack Lattices for the KAON Accumulator and Booster Rings”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 494-497. 
[n]	Y. E. Tan, N. J. Basten, T. D. Cornall, E. Joseph Vettoor, A. Michalczyk, and D. J. Peake, “Fast Orbit Feedback System at SLSA”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 293-297. doi:10.18429/JACoW-IBIC2015-TUPB002
[n]	S. G. Biedron et al., “The Operation of the BNL/ATF GUN-IV Photocathode RF Gun at the Advanced Photon Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA59, pp. 2024-2026. 
[n]	M. Abo-Bakr et al., “Status of the Berlin Energy Recovery Linac Project BERLinPro”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 855-858. doi:10.18429/JACoW-IPAC2017-MOPVA005
[n]	M. A. Leitner et al., “High-Current, High-Duty-Factor Experiments with the H- Ion Source for the Spallation Neutron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA13, pp. 1911-1913. 
[n]	V. Chouhan, D. J. Bice, D. A. Burk, M. K. Ng, and G. Wu, “Visual, Optical and Replica Inspections: Surface Preparation of 650 MHz Nb Cavity for PIP-II Linac”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 507-511. doi:10.18429/JACoW-SRF2023-TUPTB041
[n]	G. K. Sahoo, K. Balewski, and A. Kling, “Post-Mortem Analysis of BPM-Interlock Triggered Beam Dumps at PETRA-III”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD22, pp. 43-45. 
[n]	F. W. Meyer, Y. Liu, and H. J. You, “In-Situ Electron Cyclotron Resonance (ECR) Plasma Potential Determination Using an Emissive Probe”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE028, pp. 2035-2037. 
[n]	R. J. Roussel et al., “Transformer Ratio Measurements from Ramped Beams in the Plasma Blowout Regime using Emittance Exchange”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3778-3781. doi:10.18429/JACoW-IPAC2019-THPGW088
[n]	S. J. Payne, P. G. Barnes, G. M. Cross, A. Pertica, and S. A. Whitehead, “A Self Calibrating Real Time Multi-Channel Profile Monitor for the Isis Proton Synchrotron”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPC24, pp. 364-366. 
[n]	I. D. Finch et al., “Progress of the EPICS Transition at the Isis Accelerators”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 817-822. doi:10.18429/JACoW-ICALEPCS2023-TUPDP108
[n]	V. Kumar, W. M. Fawley, and S. Krishnagopal, “Start-up of an FEL Oscillator from Shot Noise”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA038, pp. 163-165. 
[n]	S. Chouksey, S. Krishnagopal, V. Kumar, S. Lal, K. K. Pant, and V. Prasad, “Mechanical Engineering Challenges in the Development of the FEL at RRCAT”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA111, pp. 479-481. 
[n]	T. S. Paik, E. F. Wilson, and E. A. Tekle, “CAD Model and Visual Assisted Control System for NIF Target Area Positioners”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WOAB02, pp. 293-295. 
[n]	F. Furuta, D. J. Bice, M. Martinello, and T. J. Ring, “Extra-Cold EP Process at Fermilab”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 230. doi:10.18429/JACoW-SRF2021-MOPTEV012
[n]	R. Klein, P. Budz, K. Buerkmann-Gehrlein, J. Rahn, G. Ulm, and G. Wuestefeld, “The Metrology Light Source: an Electron Storage Ring Dedicated to Metrology”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS019, pp. 3314-3316. 
[n]	Y. P. Singh, S. Kotaiah, and A. C. Thakurta, “Active Filter for Harmonic Mitigation for Magnet Power Supplies of INDUS-II”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA032, pp. 671-673. 
[n]	G. J. Silvi et al., “Dynamics studies for advanced-compact and high repetition rate C-band injector for PWFA”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS112, unpublished. 
[n]	P. Jain, I. Ben-Zvi, and C. Schultheiss, “Temperature Dependent Microphonics in the BNL Electron Cooler”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC123, pp. 370-372. 
[n]	G. Blokesch, J. Friedl, A. Jankowiak, C. Piel, T. Weis, and K. Wille, “The Injector Linac of the DELTA-Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP135G, pp. 834-838. 
[n]	G. S. Brown, V. P. Suller, and E. Zinin, “Measurement of Bunch Length with an Image Dissector Tube”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2348-2351. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search