Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] N. C. Bhattacharya, J. A. Nolen, and S. Tanaka, “Design, Fabrication and Testing of a Nested Pair of ''cos theta; Dipole'' X-Y Steering Magnets”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper G2-03, pp. 471-473.
[n] B. J. A. Shepherd, “Permanent Magnets for Accelerators”, in Proc. IPAC'20, Caen, France, May 2020, pp. 1. doi:10.18429/JACoW-IPAC2020-MOVIRO05
[n] C.-Y. Liu, Y.-C. Chien, J. P. Chiou, and J.-T. Sheu, “Performance of Switched Mode AC Power Supply”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH012, pp. 3687-3689.
[n] H. H. Lv, C. P. Chu, Y. B. Leng, and Y. B. Yan, “Development of Web-based Parameter Management System for SHINE”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1484. doi:10.18429/JACoW-ICALEPCS2019-WEPHA166
[n] T. Y. Jiang et al., “An Embedded Beam Diagnostic Electronics for 230 MeV Superconducting Cyclotron Radial Probe and Scanning Wires”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper MOPO012, pp. 80-82. doi:10.18429/JACoW-CYCLOTRONS2022-MOPO012
[n] V. Kapin, M. Inoue, Y. Iwashita, and A. Noda, “Normal Mode Analysis of the Four Rod RFQ as a System of TEM Transmission Lines”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-78, pp. 254-256.
[n] C. H. Shim, M. Cho, J. Kang, S. Kim, and K. Moon, “Study on the characteristics of the XFEL beam source in the hard X-ray beamline at PAL-XFEL”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPB031, unpublished.
[n] O. Shelbaya, R. A. Baartman, O. K. Kester, S. Kiy, and S. D. Rädel, “Model Coupled Accelerator Tuning With an Envelope Code”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 549-551. doi:10.18429/JACoW-LINAC2022-TUPORI03
[n] S. Setzer, R. Cee, M. Krassilnikov, and T. Weiland, “FEL Photoinjector Simulation Studies by Combining MAFIA TS2 and ASTRA”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI076, pp. 1664-1666.
[n] R. Kratz, G. Hinderer, J. Junger, J. Labedzki, and U. Trinks, “The Superconducting Tritron Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2254-2257.
[n] S. Spampinati, B. D. Muratori, N. Thompson, and P. H. Williams, “A Laser Heater for CLARA”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 129-132. doi:10.18429/JACoW-FEL2015-MOP044
[n] E. Saldin, E. Schneidmiller, A. Seryi, and M. V. Yurkov, “Free Electron Laser for Gamma-Gamma Collider at a Low-Energy Option of International Linear Collider”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP083, pp. 2694-2696.
[n] D. Sagan, D. A. Bates, and A. Wolski, “The Universal Accelerator Parser”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper THM2IS02, pp. 303-307.
[n] Z. Q. Li et al., “Fabrication and test of the 500 MHz SC modules for the BEPCII”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP23, pp. XX-XX.
[n] M. Inoue, V. Kapin, and A. Noda, “Design Study of a Multiple-Beam RFQ Version of a High-Current Linac Injector for a Neutron Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP18C, pp. 725-727.
[n] M. Roehrs, C. Gerth, M. Huening, and H. Schlarb, “Slice Emittance Measurements at FLASH”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH013, pp. 77-79.
For LaTeX
Use Complete Form
For BibTeX
References
- N. C. Bhattacharya, J. A. Nolen, and S. Tanaka, “Design, Fabrication and Testing of a Nested Pair of ''cos theta; Dipole'' X-Y Steering Magnets”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper G2-03, pp. 471-473.
- B. J. A. Shepherd, “Permanent Magnets for Accelerators”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, pp. 1.
- C.-Y. Liu, Y.-C. Chien, J. P. Chiou, and J.-T. Sheu, “Performance of Switched Mode AC Power Supply”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH012, pp. 3687-3689.
- H. H. Lv, C. P. Chu, Y. B. Leng, and Y. B. Yan, “Development of Web-based Parameter Management System for SHINE”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1484.
- T. Y. Jiang et al., “An Embedded Beam Diagnostic Electronics for 230 MeV Superconducting Cyclotron Radial Probe and Scanning Wires”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper MOPO012, pp. 80-82.
- V. Kapin, M. Inoue, Y. Iwashita, and A. Noda, “Normal Mode Analysis of the Four Rod RFQ as a System of TEM Transmission Lines”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-78, pp. 254-256.
- C. H. Shim, M. Cho, J. Kang, S. Kim, and K. Moon, “Study on the characteristics of the XFEL beam source in the hard X-ray beamline at PAL-XFEL”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB031, unpublished.
- O. Shelbaya, R. A. Baartman, O. K. Kester, S. Kiy, and S. D. Rädel, “Model Coupled Accelerator Tuning With an Envelope Code”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 549-551.
- S. Setzer, R. Cee, M. Krassilnikov, and T. Weiland, “FEL Photoinjector Simulation Studies by Combining MAFIA TS2 and ASTRA”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI076, pp. 1664-1666.
- R. Kratz, G. Hinderer, J. Junger, J. Labedzki, and U. Trinks, “The Superconducting Tritron Magnets”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2254-2257.
- S. Spampinati, B. D. Muratori, N. Thompson, and P. H. Williams, “A Laser Heater for CLARA”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 129-132.
- E. Saldin, E. Schneidmiller, A. Seryi, and M. V. Yurkov, “Free Electron Laser for Gamma-Gamma Collider at a Low-Energy Option of International Linear Collider”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP083, pp. 2694-2696.
- D. Sagan, D. A. Bates, and A. Wolski, “The Universal Accelerator Parser”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper THM2IS02, pp. 303-307.
- Z. Q. Li et al., “Fabrication and test of the 500 MHz SC modules for the BEPCII”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP23, pp. XX-XX.
- M. Inoue, V. Kapin, and A. Noda, “Design Study of a Multiple-Beam RFQ Version of a High-Current Linac Injector for a Neutron Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP18C, pp. 725-727.
- M. Roehrs, C. Gerth, M. Huening, and H. Schlarb, “Slice Emittance Measurements at FLASH”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH013, pp. 77-79.
Back to search