Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Favourites
For Word
[n] J. A. Holmes et al., “ORBIT: Beam Dynamics Calculations for High-Intensity Rings”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE022, pp. 1022-1024.
[n] T. Konomi et al., “Design of the Cathode Stalk for the LCLS-II-HE Low Emittance Injector”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 253-255. doi:10.18429/JACoW-NAPAC2022-MOPA87
[n] N. S. Sereno et al., “Bunch Length Measurements at the Advanced Photon Source (APS) Linear Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA10, pp. 1070-1072.
[n] P. Forck and A. Peters, “Non-Interfering Beam Diagnostic Developments”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MO203, pp. 13-17.
[n] V. Sabaiduc et al., “New High Intensity Compact Negative Hydrogen Ion Cyclotrons”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP017, pp. 81-83.
[n] E. F. Parker et al., “High Energy Polarized Deuterons at the Argonne National Laboratory Zero Gradient Synchrotron”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3200-3203.
[n] B. Zhang, X. Li, S. Wang, and R. Yang, “Test of the large-diameter CNT wire for the high-intensity beam diagnostics”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM056, unpublished.
[n] T. F. Wang and Y. Goren, “Voltage Counter-Phasing in the SSC Low Energy Booster”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 883-886.
[n] K. J. Hazelwood et al., “Disentangling Beam Losses in The Fermilab Main Injector Enclosure Using Real-Time Edge AI”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 273-279. doi:10.18429/JACoW-ICALEPCS2023-TU1BCO06
[n] A. Castilla et al., “Ka-Band Linearizer Studies for a Compact Light Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2976-2979. doi:10.18429/JACoW-IPAC2019-WEPRB068
[n] S. Harave and B. Morris, “Efficiency, Power Loss, and Power Factor Measurement of Quadrupole Magnet Power Supplies at the Spallation Neutron Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2428-2430. doi:10.18429/JACoW-IPAC2021-TUPAB388
[n] O. Chimalpopoca et al., “Engineering, Manufacturing and Validation of Microwave Thermionic Electron Gun for Advanced Photon Source Upgrade”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA022, unpublished.
[n] M. Buttner, J. Lauener, K. Sigerud, M. Sobczak, N. Stapley, and P. Charrue, “The DIAMON Project -- Monitoring and Diagnostics for the CERN Controls Infrastructure”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPA35, pp. 588-590.
[n] M. Xie, “Design Optimization for an X-Ray Free Electron Laser Driven by SLAC Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPG10, pp. 183-185.
[n] B. Zhang, C. Chen, X. Li, S. Wang, and R. Yang, “Preliminary commissioning results of the LW prototype at CSNS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM055, unpublished.
[n] L. Walling, Y. Goren, N. Spayd, and E. Ruiz, “Beam Coupling Impedance Measurements and Simulations of a Beam Pipe Liner with Pumping Holes or Slots”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3405-3408.
[n] R. Koontz, “Design Optimization and Construction of the Thyratron/PFN Based Cost Model Modulator for the NLC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP16, pp. 1512-1514.
[n] D. Shu et al., “Modular Nanopositioning Flexure Stages Development for APS Upgrade K-B Mirror Nanofocusing Optics”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 199. doi:10.18429/JACoW-MEDSI2020-TUPC10
[n] B. Koubek et al., “LILac Energy Upgrade to 13 MeV”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 651-653. doi:10.18429/JACoW-IPAC2021-MOPAB192
[n] M. Kaemingk, E. Simakov, J. Rosenzweig, and P. M. Anisimov, “Calculations of emittance measurements via inverse Compton scattering”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 978-981. doi:10.18429/JACoW-NAPAC2025-THP017
[n] B. Krietenstein et al., “The S-Band 36-Cell Experiment”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPB16, pp. 695-697.
[n] W. F. Badgett et al., “LHC@FNAL -- A New Remote Operations Center at Fermilab”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper MOPA02, pp. 23-25.
[n] W. L. Millar, G. Burt, and W. Wuensch, “Monte Carlo Model of High-Voltage Conditioning and Operation”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 283-286. doi:10.18429/JACoW-LINAC2022-MOPORI24
[n] W. Chen, R. Qiu, and R. Yang, “Design considerations of the bunch-by-bunch transverse feedback system for the CSNS RCS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM054, unpublished.
[n] C. P. Chu, D. P. Jin, G. Lei, C. H. Wang, and L. X. Zhu, “HEPS Controls Status Update”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 14-16. doi:10.18429/JACoW-PCaPAC2018-WEC4
[n] V. Langlois et al., “Study and Characterization of SPIRAL2 BPMs”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 499-503. doi:10.18429/JACoW-IBIC2019-WEPP001
[n] C. Liu, Y. Leng, X. Yang, and Y. Deng, “PREDICTION OF FEL PERFORMANCE USING BPM MEASUREMENTS AND MACHINE LEARNING”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 50-54. doi:10.18429/JACoW-IBIC2025-MOPCO02
[n] N. Kuklev et al., “ML-enhanced commissioning of the APS-U accelerator complex”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1778-1781. doi:10.18429/JACoW-IPAC2024-TUPS50
[n] C.-J. Jing, S. P. Antipov, A. Kanareykin, and R. A. Kostin, “A Portable X-ray Source Based on Dielectric Accelerators”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 464-466. doi:10.18429/JACoW-IPAC2018-MOPML029
[n] B. Aksel, “Hydraulic Quench Simulations in SSC Dipole Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2209-2212.
[n] T. Raubenheimer et al., “Collective Effects in the NLC Damping Ring Designs”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPQ16, pp. 2986-2988.
[n] A. Zaltsman et al., “High Level RF for the SNS Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE101, pp. 2202-2204.
[n] W. Meyer et al., “Generation of High Power 140 GHz Microwaves with an FEL for the MTX Experiment”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1551-1554.
[n] F. Marti, J. Griffin, and V. Taivassalo, “Design of the Axial Injection System for the NSCL Cyclotrons”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2450-2453.
[n] Y. Kang and G. Waldschmidt, “Investigation of Twisted Waveguides as Slow Wave Structures”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THE18, pp. 1009-1011.
[n] R. Gerig, C. Moore, and S. Pruss, “Measurement of Incoherent Laslett Tune Shifts in the Fermilab Main Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2488-2491.
[n] C. Wagner, O. Meusel, U. Ratzinger, and H. Reichau, “First Measurements with the Test Stand for Optical Beam Tomography”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD52, pp. 422-424.
[n] T. K. Kroc, C. W. Schmidt, and A. V. Shemyakin, “Magnetic Shielding of an Electron Beamline in a Hadron Accelerator Enclosure”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE027, pp. 1997-1999.
For LaTeX
Use Complete Form
For BibTeX
References
- J. A. Holmes et al., “ORBIT: Beam Dynamics Calculations for High-Intensity Rings”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE022, pp. 1022-1024.
- T. Konomi et al., “Design of the Cathode Stalk for the LCLS-II-HE Low Emittance Injector”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 253-255.
- N. S. Sereno et al., “Bunch Length Measurements at the Advanced Photon Source (APS) Linear Accelerator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPA10, pp. 1070-1072.
- P. Forck and A. Peters, “Non-Interfering Beam Diagnostic Developments”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper MO203, pp. 13-17.
- V. Sabaiduc et al., “New High Intensity Compact Negative Hydrogen Ion Cyclotrons”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP017, pp. 81-83.
- E. F. Parker et al., “High Energy Polarized Deuterons at the Argonne National Laboratory Zero Gradient Synchrotron”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3200-3203.
- B. Zhang, X. Li, S. Wang, and R. Yang, “Test of the large-diameter CNT wire for the high-intensity beam diagnostics”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM056, unpublished.
- T. F. Wang and Y. Goren, “Voltage Counter-Phasing in the SSC Low Energy Booster”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 883-886.
- K. J. Hazelwood et al., “Disentangling Beam Losses in The Fermilab Main Injector Enclosure Using Real-Time Edge AI”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TU1BCO06, pp. 273-279.
- A. Castilla et al., “Ka-Band Linearizer Studies for a Compact Light Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2976-2979.
- S. Harave and B. Morris, “Efficiency, Power Loss, and Power Factor Measurement of Quadrupole Magnet Power Supplies at the Spallation Neutron Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2428-2430.
- O. Chimalpopoca et al., “Engineering, Manufacturing and Validation of Microwave Thermionic Electron Gun for Advanced Photon Source Upgrade”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA022, unpublished.
- M. Buttner, J. Lauener, K. Sigerud, M. Sobczak, N. Stapley, and P. Charrue, “The DIAMON Project -- Monitoring and Diagnostics for the CERN Controls Infrastructure”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPA35, pp. 588-590.
- M. Xie, “Design Optimization for an X-Ray Free Electron Laser Driven by SLAC Linac”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPG10, pp. 183-185.
- B. Zhang, C. Chen, X. Li, S. Wang, and R. Yang, “Preliminary commissioning results of the LW prototype at CSNS”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM055, unpublished.
- L. Walling, Y. Goren, N. Spayd, and E. Ruiz, “Beam Coupling Impedance Measurements and Simulations of a Beam Pipe Liner with Pumping Holes or Slots”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3405-3408.
- R. Koontz, “Design Optimization and Construction of the Thyratron/PFN Based Cost Model Modulator for the NLC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP16, pp. 1512-1514.
- D. Shu et al., “Modular Nanopositioning Flexure Stages Development for APS Upgrade K-B Mirror Nanofocusing Optics”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 199.
- B. Koubek et al., “LILac Energy Upgrade to 13 MeV”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 651-653.
- M. Kaemingk, E. Simakov, J. Rosenzweig, and P. M. Anisimov, “Calculations of emittance measurements via inverse Compton scattering”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 978-981.
- B. Krietenstein et al., “The S-Band 36-Cell Experiment”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPB16, pp. 695-697.
- W. F. Badgett et al., “LHC@FNAL -- A New Remote Operations Center at Fermilab”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper MOPA02, pp. 23-25.
- W. L. Millar, G. Burt, and W. Wuensch, “Monte Carlo Model of High-Voltage Conditioning and Operation”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 283-286.
- W. Chen, R. Qiu, and R. Yang, “Design considerations of the bunch-by-bunch transverse feedback system for the CSNS RCS”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM054, unpublished.
- C. P. Chu, D. P. Jin, G. Lei, C. H. Wang, and L. X. Zhu, “HEPS Controls Status Update”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 14-16.
- V. Langlois et al., “Study and Characterization of SPIRAL2 BPMs”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 499-503.
- C. Liu, Y. Leng, X. Yang, and Y. Deng, “PREDICTION OF FEL PERFORMANCE USING BPM MEASUREMENTS AND MACHINE LEARNING”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 50-54.
- N. Kuklev et al., “ML-enhanced commissioning of the APS-U accelerator complex”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS50, pp. 1778-1781.
- C.-J. Jing, S. P. Antipov, A. Kanareykin, and R. A. Kostin, “A Portable X-ray Source Based on Dielectric Accelerators”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 464-466.
- B. Aksel, “Hydraulic Quench Simulations in SSC Dipole Magnets”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2209-2212.
- T. Raubenheimer et al., “Collective Effects in the NLC Damping Ring Designs”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPQ16, pp. 2986-2988.
- A. Zaltsman et al., “High Level RF for the SNS Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE101, pp. 2202-2204.
- W. Meyer et al., “Generation of High Power 140 GHz Microwaves with an FEL for the MTX Experiment”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1551-1554.
- F. Marti, J. Griffin, and V. Taivassalo, “Design of the Axial Injection System for the NSCL Cyclotrons”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2450-2453.
- Y. Kang and G. Waldschmidt, “Investigation of Twisted Waveguides as Slow Wave Structures”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THE18, pp. 1009-1011.
- R. Gerig, C. Moore, and S. Pruss, “Measurement of Incoherent Laslett Tune Shifts in the Fermilab Main Ring”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2488-2491.
- C. Wagner, O. Meusel, U. Ratzinger, and H. Reichau, “First Measurements with the Test Stand for Optical Beam Tomography”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD52, pp. 422-424.
- T. K. Kroc, C. W. Schmidt, and A. V. Shemyakin, “Magnetic Shielding of an Electron Beamline in a Hadron Accelerator Enclosure”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE027, pp. 1997-1999.
Back to search