Favourites
For Word
[n] C. Tennant and D. Douglas, “Design Concept for a Compact ERL to Drive a VUV/Soft X-Ray FEL”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP187, pp. 2468-2470.
[n] S. Fabbri, L. Bottura, and M. Statera, “Progress on the design of solenoids for the 6D cooling channel of a muon collider”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB033, unpublished.
[n] A. S. Setty et al., “Commissioning of the 100 MeV Preinjector HELIOS for the SOLEIL Synchrotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH112, pp. 1274-1276.
[n] S. Nagaitsev, “Project X - New Multi Megawatt Proton Source at Fermilab”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper FROBN3, pp. 2566-2569.
[n] I. Drebot et al., “Optimisation Study of the Fabry-P?®rot Optical Cavity for the MARIX/BRIXS Compton X-Ray Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4192-4195. doi:10.18429/JACoW-IPAC2018-THPMF056
[n] X. C. Wang, K. Jin, Y. J. Pei, L. G. Shen, Z. Shu, and Y. Sun, “Electromagnetic Parameters Study of Microwave-absorbing Material FeSiAl for Collinear Load of LINAC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA075, pp. 1494-1496.
[n] O. Dressler, J. Kuszynski, and M. Markert, “Modular Stand-Alone Pulse Current Measurement System for Kicker and Septa at BESSY II and MLS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3794-3796. doi:10.18429/JACoW-IPAC2014-THPRI014
[n] Z. Shu, Y. J. Pei, L. G. Shen, Y. Sun, and X. C. Wang, “Study on Frequency Change by 3D Reconstruction of Deformed Cavities of LINAC Collinear Load”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA027, pp. 3738-3740.
[n] Z. Fang et al., “RF System for Compact Medical Proton Synchrotron”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF035, pp. 1039-1041.
[n] Y. Wu, B. Burnham, V. N. Litvinenko, J. M. J. Madey, and N. Hower, “Specific Features of Magnet Design for the Duke FEL Storage Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2889-2892.
[n] A. M. Toader, D. Angal-Kalinin, R. J. Barlow, and F. Jackson, “Effect of Collimator Wakefields in the Beam Delivery System of the International Linear Collider”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP167, pp. 2880-2882.
[n] Q. M. Duan and Y. L. Yang, “The Development of Tune Measurement System Based on FPGA at HLSII Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 305-308. doi:10.18429/JACoW-IPAC2017-MOPAB080
[n] M. Venturini et al., “Beam Dynamics Studies of a High-repetition Rate Linac Driver for a 4th-generation Light Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP074, pp. 1771-1773.
[n] X. Lu et al., “Rapid Radio-Frequency Beam Energy Modulator for Proton Therapy”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 298-300. doi:10.18429/JACoW-NAPAC2019-TUXBA4
[n] K. N. Sjobak, E. Adli, A. Grudiev, and W. Wuensch, “Design of an Accelerating Structure for a 500 GeV CLIC using Ace3P”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC011, pp. 3296-3298.
[n] A. T. Fetterman et al., “Generation of High-Charge Magnetized Electron Beams Consistent With JLEIC Electron Cooling Requirements”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 414-417. doi:10.18429/JACoW-NAPAC2019-TUPLM20
[n] E. Kako, Y. Yamamoto, T. Shishido, K. Watanabe, M. Satoh, and S. Noguchi, “Status of Development of the cERL Superconducting Injector Linac”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP005, pp. 401-403.
For LaTeX
Use Complete Form
For BibTeX
References
- C. Tennant and D. Douglas, “Design Concept for a Compact ERL to Drive a VUV/Soft X-Ray FEL”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP187, pp. 2468-2470.
- S. Fabbri, L. Bottura, and M. Statera, “Progress on the design of solenoids for the 6D cooling channel of a muon collider”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB033, this conference.
- A. S. Setty et al., “Commissioning of the 100 MeV Preinjector HELIOS for the SOLEIL Synchrotron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH112, pp. 1274-1276.
- S. Nagaitsev, “Project X - New Multi Megawatt Proton Source at Fermilab”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper FROBN3, pp. 2566-2569.
- I. Drebot et al., “Optimisation Study of the Fabry-P?®rot Optical Cavity for the MARIX/BRIXS Compton X-Ray Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4192-4195.
- X. C. Wang, K. Jin, Y. J. Pei, L. G. Shen, Z. Shu, and Y. Sun, “Electromagnetic Parameters Study of Microwave-absorbing Material FeSiAl for Collinear Load of LINAC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEA075, pp. 1494-1496.
- O. Dressler, J. Kuszynski, and M. Markert, “Modular Stand-Alone Pulse Current Measurement System for Kicker and Septa at BESSY II and MLS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3794-3796.
- Z. Shu, Y. J. Pei, L. G. Shen, Y. Sun, and X. C. Wang, “Study on Frequency Change by 3D Reconstruction of Deformed Cavities of LINAC Collinear Load”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA027, pp. 3738-3740.
- Z. Fang et al., “RF System for Compact Medical Proton Synchrotron”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF035, pp. 1039-1041.
- Y. Wu, B. Burnham, V. N. Litvinenko, J. M. J. Madey, and N. Hower, “Specific Features of Magnet Design for the Duke FEL Storage Ring”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2889-2892.
- A. M. Toader, D. Angal-Kalinin, R. J. Barlow, and F. Jackson, “Effect of Collimator Wakefields in the Beam Delivery System of the International Linear Collider”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP167, pp. 2880-2882.
- Q. M. Duan and Y. L. Yang, “The Development of Tune Measurement System Based on FPGA at HLSII Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 305-308.
- M. Venturini et al., “Beam Dynamics Studies of a High-repetition Rate Linac Driver for a 4th-generation Light Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP074, pp. 1771-1773.
- X. Lu et al., “Rapid Radio-Frequency Beam Energy Modulator for Proton Therapy”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 298-300.
- K. N. Sjobak, E. Adli, A. Grudiev, and W. Wuensch, “Design of an Accelerating Structure for a 500 GeV CLIC using Ace3P”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPC011, pp. 3296-3298.
- A. T. Fetterman et al., “Generation of High-Charge Magnetized Electron Beams Consistent With JLEIC Electron Cooling Requirements”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 414-417.
- E. Kako, Y. Yamamoto, T. Shishido, K. Watanabe, M. Satoh, and S. Noguchi, “Status of Development of the cERL Superconducting Injector Linac”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TUP005, pp. 401-403.
Back to search