Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Seal et al., “Upgraded multiprobe sample inserts for thin film SRF cavity developments”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2775-2778. doi:10.18429/JACoW-IPAC2024-WEPS38
[n] A. Faltens, M. Firth, D. Keefe, and S. S. Rosenblum, “Long-Pulse Induction Acceleration of Heavy Ions”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3669-3672.
[n] H. Mainaud Durand et al., “Theoretical and Practical Feasibility Demonstration of a Micrometric Remotely Controlled Pre-alignment System for the CLIC Linear Collider”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO030, pp. 547-549.
[n] L. O. Dallin, “Cls 2.2: Ultra-Brilliant Round Beams Using Pseudo Longitudinal Gradient Bends”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1385-1387. doi:10.18429/JACoW-IPAC2019-TUPGW004
[n] T. J. Ellison, J. C. Collins, D. L. Friesel, W. P. Jones, P. Schwandt, and W. T. Sloan, “Progress in Commissioning the IUCF Cooler”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1608-1611.
[n] F.-T. Chung et al., “Upgrade of the Cryogenic Control System for SRF Modules at the Taiwan Light Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1356-1358. doi:10.18429/JACoW-IPAC2019-TUPMP047
[n] D. M. Harryman and C. C. Wilcox, “An Upgraded Scanning Wire Beam Profile Monitoring System for the ISIS High Energy Drift Space”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 396-400. doi:10.18429/JACoW-IBIC2017-WEPCC18
[n] S. Ishimoto, M. A. Green, Y. Kuno, W. Lau, S. Suzuki, and M. Y. Yoshida, “Liquid Hydrogen Absorber for MICE”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB065, pp. 421-423.
[n] J. C. Collins, T. Bertuccio, D. C. DuPlantis, Wm. Manwaring, and L. C. Welch, “A Review of Developments on the IUCF Cyclotron Control System”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper FC-01, pp. 559-563.
[n] J. Pasternak et al., “Accelerator and Particle Physics Research for the Next Generation Muon to Electron Conversion Experiment - the PRISM Task Force”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE056, pp. 3473-3475.
[n] Y. J. Yuan, Y. N. Rao, B. W. Wei, and J. W. Xia, “Simulation of RF Stacking and Multiple Single-Turn Injection and Multiturn Injection”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper H-11, pp. 479-482.
[n] N. Solyak and S. A. Glukhov, “Studies of Orthogonal Bumps for ILC Main Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC037, pp. 3059-3061.
[n] Y. H. Chin, “Modeling and Design of Klystron”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU2003, pp. 367-371.
[n] F. Loehl and P. Szypryt, “Active Beam Current Stabilization in the Cornell ERL Prototype Injector”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO018, pp. 523-525.
[n] S. Yamin, R. W. A?ƒmann, and B. Marchetti, “Study for the Alignment of Focusing Solenoid of ARES RF Gun and Effect of Misalignment of Solenoid on Emittance of Space Charge Dominated Electron Beam”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 147-150. doi:10.18429/JACoW-IPAC2019-MOPGW028
[n] J. A. Johnstone, M. Syphers, S. Peggs, and S. Tepikian, “Lattice Design of the VLHC Rings”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH134, pp. 3162-3164.
[n] C. Gonzalez-Ortiz, P. Ostroumov, and R. Ainsworth, “Simultaneous Compensation of Third-Order Resonances at the FNAL Recycler Ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3375-3378. doi:10.18429/JACoW-IPAC2023-WEPL112
[n] Z. B. du Toit et al., “Progress with the NAC Injector Cyclotron for Heavy and Polarized Ions”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VIII-15, pp. 361-364.
[n] H. Yoshikawa et al., “High Current 1ns Pulse Electron Gun”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-20, pp. 410-412.
[n] I. E. Campisi, J. Patrick Kelley, J. Schneider, and M. Sundelin, “CEBAF Cryomodule Testing”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2381-2384.
[n] R. Stassen, B. Breitkreutz, R. Greven, H. Schneider, and J. Wolters, “Kicker for the CR Stochastic Cooling System Based on HESR Slot-Ring Coupler”, in Proc. COOL2023, Montreux, Switzerland, Oct. 2023, pp. 106-108. doi:10.18429/JACoW-COOL2023-THPOSRP23
[n] M. Heya, H. Horiike, K. Ishii, and S. Suzuki, “Development of a Pump-Probe System using a Non-Coated ZnSe Beam Splitter Cube for an MIR-FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS18, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- D. Seal et al., “Upgraded multiprobe sample inserts for thin film SRF cavity developments”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS38, pp. 2775-2778.
- A. Faltens, M. Firth, D. Keefe, and S. S. Rosenblum, “Long-Pulse Induction Acceleration of Heavy Ions”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3669-3672.
- H. Mainaud Durand et al., “Theoretical and Practical Feasibility Demonstration of a Micrometric Remotely Controlled Pre-alignment System for the CLIC Linear Collider”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPO030, pp. 547-549.
- L. O. Dallin, “Cls 2.2: Ultra-Brilliant Round Beams Using Pseudo Longitudinal Gradient Bends”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1385-1387.
- T. J. Ellison, J. C. Collins, D. L. Friesel, W. P. Jones, P. Schwandt, and W. T. Sloan, “Progress in Commissioning the IUCF Cooler”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1608-1611.
- F.-T. Chung et al., “Upgrade of the Cryogenic Control System for SRF Modules at the Taiwan Light Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1356-1358.
- D. M. Harryman and C. C. Wilcox, “An Upgraded Scanning Wire Beam Profile Monitoring System for the ISIS High Energy Drift Space”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 396-400.
- S. Ishimoto, M. A. Green, Y. Kuno, W. Lau, S. Suzuki, and M. Y. Yoshida, “Liquid Hydrogen Absorber for MICE”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB065, pp. 421-423.
- J. C. Collins, T. Bertuccio, D. C. DuPlantis, Wm. Manwaring, and L. C. Welch, “A Review of Developments on the IUCF Cyclotron Control System”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper FC-01, pp. 559-563.
- J. Pasternak et al., “Accelerator and Particle Physics Research for the Next Generation Muon to Electron Conversion Experiment - the PRISM Task Force”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE056, pp. 3473-3475.
- Y. J. Yuan, Y. N. Rao, B. W. Wei, and J. W. Xia, “Simulation of RF Stacking and Multiple Single-Turn Injection and Multiturn Injection”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper H-11, pp. 479-482.
- N. Solyak and S. A. Glukhov, “Studies of Orthogonal Bumps for ILC Main Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC037, pp. 3059-3061.
- Y. H. Chin, “Modeling and Design of Klystron”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU2003, pp. 367-371.
- F. Loehl and P. Szypryt, “Active Beam Current Stabilization in the Cornell ERL Prototype Injector”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPO018, pp. 523-525.
- S. Yamin, R. W. A?ƒmann, and B. Marchetti, “Study for the Alignment of Focusing Solenoid of ARES RF Gun and Effect of Misalignment of Solenoid on Emittance of Space Charge Dominated Electron Beam”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 147-150.
- J. A. Johnstone, M. Syphers, S. Peggs, and S. Tepikian, “Lattice Design of the VLHC Rings”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH134, pp. 3162-3164.
- C. Gonzalez-Ortiz, P. Ostroumov, and R. Ainsworth, “Simultaneous Compensation of Third-Order Resonances at the FNAL Recycler Ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL112, pp. 3375-3378.
- Z. B. du Toit et al., “Progress with the NAC Injector Cyclotron for Heavy and Polarized Ions”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper VIII-15, pp. 361-364.
- H. Yoshikawa et al., “High Current 1ns Pulse Electron Gun”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-20, pp. 410-412.
- I. E. Campisi, J. Patrick Kelley, J. Schneider, and M. Sundelin, “CEBAF Cryomodule Testing”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2381-2384.
- R. Stassen, B. Breitkreutz, R. Greven, H. Schneider, and J. Wolters, “Kicker for the CR Stochastic Cooling System Based on HESR Slot-Ring Coupler”, in Proc. 14th International Workshop on Beam Cooling and Related Topics (COOL2023), Montreux, Switzerland, Oct. 2023, paper THPOSRP23, pp. 106-108.
- M. Heya, H. Horiike, K. Ishii, and S. Suzuki, “Development of a Pump-Probe System using a Non-Coated ZnSe Beam Splitter Cube for an MIR-FEL”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THPOS18, pp. XX-XX.
Back to search