Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. S. Hsue, C. C. Kuo, J. C. Lee, and M. H. Wang, “Lattice Design of the SRRC 1.3 GeV Storage Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2670-2673.
[n] C. S. Hwang, C. H. Chang, M. H. Huang, G. J. Hwang, and P. K. Tseng, “Magnetic Field Features of the Asymmetric Magnetic Circuit on the Sextupole Magnet”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1247-1250.
[n] J. Zhang, X. Z. Chen, and X. L. Liu, “A Stabilizer for Dee Voltage and Resonator Frequency in INR Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I2-12, pp. 374-375.
[n] S. A. Belomestnykh et al., “Superconducting 112 MHz QWR Electron Gun”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO054, pp. 223-225.
[n] S. Oh et al., “Polarization Programme at the University of Manitoba Cyclotron Facility - Progress Report”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper DP-06, pp. 293-295.
[n] A. Canabal, J. D. Bowyer, P. Chacon, N. A. Gillespie, M. A. Madrid, and T. Tajima, “Development of a Temperature Mapping System for 1.3-GHz 9-Cell SRF Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS031, pp. 2406-2408.
[n] T. L. Allison, H. Higgins, E. Martin, W. Merz, and S. Philip, “Jefferson Lab's Trim Card II”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE065, pp. 3670-3672.
[n] T. Watanabe, K. Nakamura, T. Ueda, and M. Uesaka, “Diagnostics of Subpicosecond Electron Pulse by the Fluctuation Method”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH119, pp. 2362-2364.
[n] S. Kusano, M. Tanaka, K. Furukawa, N. Kamikubota, M. Satoh, and N. Yamamoto, “The Operation Logbook System at KEKB Linac and Ring”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP528, pp. XX-XX.
[n] L. H. Chang, Ch. Wang, C. H. Chang, and T. C. Fan, “Passive End Pole Compensation Scheme for a 1.8 Tesla Wiggler”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAQ26, pp. 1450-1452.
[n] H. Sinn et al., “Design of Photon Beamlines at the European XFEL”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THOCI1, pp. 683-689.
[n] B. Vacaliuc et al., “Experiment Automation with a Robot Arm Using the Liquids Reflectometer Instrument at the Spallation Neutron Source”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC077, pp. 759-762.
[n] Y. Yin, X. Che, Y. Y. Labs, J. H. Wang, and K. Zheng, “Optical-Fiber NOTCH Filter for Storage Ring Transverse Feedback System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS046, pp. 4075-4077.
[n] M. Incurvati et al., “The Italian Hadrontherapy Center (CNAO): A Review of the Power Supply System for Conventional Magnets”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS128, pp. 2676-2678.
[n] G. Tosin, R. Basilio, J. F. Citadini, and M. Potye, “Development of Insertion Device Magnetic Characterization Systems at LNLS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH134, pp. 3113-3115.
[n] Y. T. Huang, C. K. Chan, C.-C. Chang, C. M. Cheng, P. J. Chou, and Y. C. Yang, “Preliminary Design of RF-Shielded Bellows”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1341-1343. doi:10.18429/JACoW-IPAC2019-TUPMP041
[n] S. DeSantis, J. Corlett, A. Wolski, and A. Zholents, “Collective Effects Analysis for the Berkeley Femtosource”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB017, pp. 866-868.
[n] S. Roy Chaudhuri, H. Hayatnagarkar, and S. Natarajan, “Integrated Monitoring and Control Specification Environment”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOCOBAB06, pp. 47-50.
[n] C. M. Gulliford et al., “CBETA Beam Commissioning Results”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 748-750. doi:10.18429/JACoW-IPAC2019-MOPRB076
[n] R. Ianconescu, C. Emma, A. Friedman, A. Gover, and P. Musumeci, “Dynamics of Superradiant Emission by a Prebunched E-Beam and its Spontaneous Emission Self-Interaction”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 572-575. doi:10.18429/JACoW-FEL2017-FRB03
[n] R. J. England et al., “Applications for Optical-Scale Dielectric Laser Accelerators”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC28, pp. 129-131.
[n] K. Furukawa et al., “Web-Based Electronic Operation Log System -- Zlog System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WOAB04, pp. 299-301.
[n] I. Bellafont, R. Kersevan, and L. Mether, “Summary of Modelling Studies on the Beam Induced Vacuum Effects in the FCC-hh”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1331-1334. doi:10.18429/JACoW-IPAC2019-TUPMP038
[n] J. N. Bai, S. Xiao, T. G. Xu, and L. Zeng, “The Development of Timing Control System for RFQ”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB081, pp. 1014-1016.
[n] J.-W. Park, K.-J. Kim, and R. R. Lindberg, “An Investigation of Possible Non-Standard Photon Statistics in a Free-Electron Laser II: Theory”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 165-167. doi:10.18429/JACoW-FEL2019-TUP054
[n] E. L. Wright et al., “Modeling and Design of High-Power Inductive Output Tubes”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU4RAC03, pp. 767-769.
[n] S. Schreiber, J. H. Han, P. Michelato, L. Monaco, and D. Sertore, “Properties of Cathodes Used in the Photoinjector RF Gun at the DESY VUV-FEL”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF021, pp. 348-350.
[n] A. Khan, “Quantum Aspects of Accelerator Optics”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA98, pp. 2817-2819.
[n] C. Bruno, N. Camarcat, J. Cortella, C. Patou, and B. Tournier, “Pulsed Neutron Source from the Intense Particle Beam Generator THALIE”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3139-3142.
[n] P. Huelsmann, H.-W. Glock, H. Klein, M. Kurz, W. F. O. Mueller, and C. Peschke, “Quality Factor Measurements in Cavities with Mode Overlap”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2209-2212.
[n] A. Seryi et al., “The US Electron Ion Collider Accelerator Designs”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 1-7. doi:10.18429/JACoW-NAPAC2019-MOOHC2
[n] E. Plouviez and L. Farvacque, “Probing the Transverse Impedance of the ESRF Storage Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI009, pp. 1550-1552.
[n] J. Teichert et al., “A Superconducting Photo-Injector with 3+1/2- Cell Cavity for the ELBE Linac”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF015, pp. 333-335.
[n] G. Stancari et al., “Beam Halo Dynamics and Control with Hollow Electron Beams”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO3C03, pp. 466-470.
[n] J. M. Koch, F. Epaud, G. A. Naylor, and E. Plouviez, “Beam Diagnostic Features of the ESRF Multibunch Feedback”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUO1A03, pp. 48-50.
[n] P. Boonpornprasert et al., “Experimental Optimization and Characterization of Electron Beams for Generating IR/THz SASE FEL Radiation with PITZ”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2650-2653. doi:10.18429/JACoW-IPAC2017-WEPAB033
[n] P. Mutti, M. Plaz, E. Ruiz-Martinez, P. Van Esch, and M. Crisanti, “Single Neutron Counting Using CCD and CMOS Cameras”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 889-892. doi:10.18429/JACoW-ICALEPCS2015-WEPGF083
[n] P. Van Trappen, R. Noulibos, and W. J. M. Weterings, “Stripping Foil Displacement Unit Control for H- Injection in PSB at CERN”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 363-366. doi:10.18429/JACoW-ICALEPCS2015-MOPGF121
[n] D. A. Pepler, I. O, and P. B. M. Oliveira, “Upgrading the Synchronisation and Trigger Systems on the Vulcan High-Power Nd:glass Laser”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 187-188. doi:10.18429/JACoW-PCaPAC2018-THP12
[n] M. Ishii, M. T. Takeuchi, C. Kondo, and T. Fukui, “A Control System Using EtherCAT Technology for The Next-Generation Accelerator”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1259. doi:10.18429/JACoW-ICALEPCS2019-WEPHA068
For LaTeX
Use Complete Form
For BibTeX
References
- C. S. Hsue, C. C. Kuo, J. C. Lee, and M. H. Wang, “Lattice Design of the SRRC 1.3 GeV Storage Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2670-2673.
- C. S. Hwang, C. H. Chang, M. H. Huang, G. J. Hwang, and P. K. Tseng, “Magnetic Field Features of the Asymmetric Magnetic Circuit on the Sextupole Magnet”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1247-1250.
- J. Zhang, X. Z. Chen, and X. L. Liu, “A Stabilizer for Dee Voltage and Resonator Frequency in INR Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I2-12, pp. 374-375.
- S. A. Belomestnykh et al., “Superconducting 112 MHz QWR Electron Gun”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO054, pp. 223-225.
- S. Oh et al., “Polarization Programme at the University of Manitoba Cyclotron Facility - Progress Report”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper DP-06, pp. 293-295.
- A. Canabal, J. D. Bowyer, P. Chacon, N. A. Gillespie, M. A. Madrid, and T. Tajima, “Development of a Temperature Mapping System for 1.3-GHz 9-Cell SRF Cavities”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS031, pp. 2406-2408.
- T. L. Allison, H. Higgins, E. Martin, W. Merz, and S. Philip, “Jefferson Lab's Trim Card II”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE065, pp. 3670-3672.
- T. Watanabe, K. Nakamura, T. Ueda, and M. Uesaka, “Diagnostics of Subpicosecond Electron Pulse by the Fluctuation Method”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH119, pp. 2362-2364.
- S. Kusano, M. Tanaka, K. Furukawa, N. Kamikubota, M. Satoh, and N. Yamamoto, “The Operation Logbook System at KEKB Linac and Ring”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP528, pp. XX-XX.
- L. H. Chang, Ch. Wang, C. H. Chang, and T. C. Fan, “Passive End Pole Compensation Scheme for a 1.8 Tesla Wiggler”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAQ26, pp. 1450-1452.
- H. Sinn et al., “Design of Photon Beamlines at the European XFEL”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THOCI1, pp. 683-689.
- B. Vacaliuc et al., “Experiment Automation with a Robot Arm Using the Liquids Reflectometer Instrument at the Spallation Neutron Source”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC077, pp. 759-762.
- Y. Yin, X. Che, Y. Y. Labs, J. H. Wang, and K. Zheng, “Optical-Fiber NOTCH Filter for Storage Ring Transverse Feedback System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS046, pp. 4075-4077.
- M. Incurvati et al., “The Italian Hadrontherapy Center (CNAO): A Review of the Power Supply System for Conventional Magnets”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS128, pp. 2676-2678.
- G. Tosin, R. Basilio, J. F. Citadini, and M. Potye, “Development of Insertion Device Magnetic Characterization Systems at LNLS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH134, pp. 3113-3115.
- Y. T. Huang, C. K. Chan, C.-C. Chang, C. M. Cheng, P. J. Chou, and Y. C. Yang, “Preliminary Design of RF-Shielded Bellows”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1341-1343.
- S. DeSantis, J. Corlett, A. Wolski, and A. Zholents, “Collective Effects Analysis for the Berkeley Femtosource”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB017, pp. 866-868.
- S. Roy Chaudhuri, H. Hayatnagarkar, and S. Natarajan, “Integrated Monitoring and Control Specification Environment”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOCOBAB06, pp. 47-50.
- C. M. Gulliford et al., “CBETA Beam Commissioning Results”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 748-750.
- R. Ianconescu, C. Emma, A. Friedman, A. Gover, and P. Musumeci, “Dynamics of Superradiant Emission by a Prebunched E-Beam and its Spontaneous Emission Self-Interaction”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 572-575.
- R. J. England et al., “Applications for Optical-Scale Dielectric Laser Accelerators”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC28, pp. 129-131.
- K. Furukawa et al., “Web-Based Electronic Operation Log System -- Zlog System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WOAB04, pp. 299-301.
- I. Bellafont, R. Kersevan, and L. Mether, “Summary of Modelling Studies on the Beam Induced Vacuum Effects in the FCC-hh”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1331-1334.
- J. N. Bai, S. Xiao, T. G. Xu, and L. Zeng, “The Development of Timing Control System for RFQ”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB081, pp. 1014-1016.
- J.-W. Park, K.-J. Kim, and R. R. Lindberg, “An Investigation of Possible Non-Standard Photon Statistics in a Free-Electron Laser II: Theory”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 165-167.
- E. L. Wright et al., “Modeling and Design of High-Power Inductive Output Tubes”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU4RAC03, pp. 767-769.
- S. Schreiber, J. H. Han, P. Michelato, L. Monaco, and D. Sertore, “Properties of Cathodes Used in the Photoinjector RF Gun at the DESY VUV-FEL”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF021, pp. 348-350.
- A. Khan, “Quantum Aspects of Accelerator Optics”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA98, pp. 2817-2819.
- C. Bruno, N. Camarcat, J. Cortella, C. Patou, and B. Tournier, “Pulsed Neutron Source from the Intense Particle Beam Generator THALIE”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3139-3142.
- P. Huelsmann, H.-W. Glock, H. Klein, M. Kurz, W. F. O. Mueller, and C. Peschke, “Quality Factor Measurements in Cavities with Mode Overlap”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2209-2212.
- A. Seryi et al., “The US Electron Ion Collider Accelerator Designs”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 1-7.
- E. Plouviez and L. Farvacque, “Probing the Transverse Impedance of the ESRF Storage Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI009, pp. 1550-1552.
- J. Teichert et al., “A Superconducting Photo-Injector with 3+1/2- Cell Cavity for the ELBE Linac”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF015, pp. 333-335.
- G. Stancari et al., “Beam Halo Dynamics and Control with Hollow Electron Beams”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper WEO3C03, pp. 466-470.
- J. M. Koch, F. Epaud, G. A. Naylor, and E. Plouviez, “Beam Diagnostic Features of the ESRF Multibunch Feedback”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUO1A03, pp. 48-50.
- P. Boonpornprasert et al., “Experimental Optimization and Characterization of Electron Beams for Generating IR/THz SASE FEL Radiation with PITZ”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2650-2653.
- P. Mutti, M. Plaz, E. Ruiz-Martinez, P. Van Esch, and M. Crisanti, “Single Neutron Counting Using CCD and CMOS Cameras”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 889-892.
- P. Van Trappen, R. Noulibos, and W. J. M. Weterings, “Stripping Foil Displacement Unit Control for H- Injection in PSB at CERN”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 363-366.
- D. A. Pepler, I. O, and P. B. M. Oliveira, “Upgrading the Synchronisation and Trigger Systems on the Vulcan High-Power Nd:glass Laser”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 187-188.
- M. Ishii, M. T. Takeuchi, C. Kondo, and T. Fukui, “A Control System Using EtherCAT Technology for The Next-Generation Accelerator”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1259.
Back to search