Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Sosin, H. Mainaud Durand, F. Micolon, V. Rude, and J. M. Rutkowski, “Robust Optical Instrumentation for Accelerator Alignment Using Frequency Scanning Interferometry”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2203-2206. doi:10.18429/JACoW-IPAC2021-TUPAB307
[n] F. Roncarolo et al., “Scattering of H- Stripped Electrons from SEM Grids and Wire Scanners at the CERN LINAC4”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB041, pp. 567-569.
[n] W. Xu et al., “Ridge Waveguide HOM Damping Scheme for High Current SRF Cavity”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2367-2369. doi:10.18429/JACoW-IPAC2016-WEPMR042
[n] S. Ishimoto, M. A. Green, Y. Kuno, W. Lau, S. Suzuki, and M. Y. Yoshida, “Liquid Hydrogen Absorber for MICE”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB065, pp. 421-423.
[n] F. Armborst, J. Kallestrup, M. I. Besana, and M. Paraliev, “SLS 2.0 machine protection”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1019-1022. doi:10.18429/JACoW-IPAC2023-MOPM018
[n] J. T. Volk, B. C. Brown, G. W. Foster, W. Fowler, H. D. Glass, and G. P. Jackson, “Time Evolution of Fields in Strontium Ferrite Permanent Magnets”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH001, pp. 3215-3217.
[n] J. S. Kolski, R. J. Macek, R. C. McCrady, and X. Pang, “Independent Component Analysis (ICA) Applied to Long Bunch Beams in the Los Alamos Proton Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR038, pp. 3018-3020.
[n] L. G. Cardoso, F. Alessio, J. Barbosa, C. Gaspar, R. Schwemmer, and P-Y. Duval, “A Framework for Hardware Integration in the LHCb Experiment Control System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 221-224. doi:10.18429/JACoW-ICALEPCS2015-MOPGF052
[n] X. T. Wang et al., “Drive Laser Temporal Shaping Techniques for Shanghai Soft X-Ray Free Electron Laser”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 466-468. doi:10.18429/JACoW-FEL2019-WEP058
[n] W. C. Sellyey and J. D. Gilpatrick, “A Compact Residual Gas Ionization Profile Monitor (RGIPM) System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA122, pp. 2152-2154.
[n] E. L. Wright et al., “Test Results for a 10-MW, L-band, Multiple-beam Klystron for TESLA”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF077, pp. 1117-1119.
[n] M. Gusarova, I. I. Petrushina, E. A. Savin, N. P. Sobenin, and D. B. Tikhonov, “Biperiodic Accelerating Structure with Inner Coupling Cells with an Increased Coupling Coefficient”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC008, pp. 458-460.
[n] G. Blume et al., “A Compton transmission polarimeter for DC and SRF electron photo-injectors”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3959-3961. doi:10.18429/JACoW-IPAC2023-THPA004
[n] B. Pritchard, J. Edelen, and M. Henderson, “Automation of sample alignment for neutron scattering experiments”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 258-260. doi:10.18429/JACoW-LINAC2024-MOPB097
[n] F. Roncarolo, U. Raich, and F. Zocca, “Commissioning of the CERN LINAC4 Wire Scanner, Wire Grid and Slit-Grid Monitors at 3 and 12 MeV”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP034, pp. 502-505.
[n] P. Golonka et al., “Detector and Run Control Systems for the NA62 Fixed-Target Experiment at CERN”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 125-128. doi:10.18429/JACoW-ICALEPCS2015-MOPGF020
[n] K. Jacobs et al., “High Duty Factor Beams Extracted from the MIT-Bates South Hall Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W011, pp. 348-350.
[n] R. Schwemmer and N. Neufeld, “Implementing High Availability with COTS Components and Open-source Software”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WED005, pp. 624-626.
[n] K. Papke, C. R. Bahls, and U. van Rienen, “Arbitrary High-Order Discontinuous Galerkin Method for Electromagnetic Field Problems”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper FRAAC2, pp. 275-277.
[n] S. Braccini, P. Casolaro, G. Dellepiane, A. Gottstein, I. Mateu, and P. Scampoli, “Accelerator and Detector Developments for the Production of Theranostic Radioisotopes with Solid Targets at the Bern Medical Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEBO06, pp. 196-199. doi:10.18429/JACoW-CYCLOTRONS2022-WEBO06
[n] M. A. Allen et al., “Relativistic Klystron Research for High Gradient Accelerators”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 121-127.
[n] T. Overton, J. Jones, T. Pacey, L. Reid, and E. Snedden, “Simulation study of beam-driven plasma wakefield experiments on CLARA”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM086, unpublished.
[n] A. Ageyev et al., “STATUS OF SUPERCONDUCTING RADIOFREQUENCY SEPARATOR CRYOGENIC SYSTEM”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFO04, pp. XX-XX.
[n] C. McGuinness et al., “Fabrication and Measurements of a Silicon Woodpile Accelerator Structure”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP133, pp. 343-345.
[n] C. Madec et al., “The Challenge to Assemble 100 Cryomodules for the European E-XFEL”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THIOA02, pp. 816-820.
[n] A. Moretti et al., “An 805 MHz Disk and Washer Structure for the Fermilab Linac Upgrade”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-41, pp. 143-145.
[n] D. Li et al., “High Power RF Test of an 805 MHz RF Cavity for a Muon Cooling Channel”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO010, pp. 2160-2162.
[n] J. Zeng et al., “Cooling Design for the FRIB RFQ Cavity at Michigan State University”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3271-3273. doi:10.18429/JACoW-IPAC2014-THPME024
[n] R. J. England et al., “Manufacture and Testing of Optical-scale Accelerator Structures from Silicon and Silica”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUYB02, pp. 1050-1053.
[n] A. Lehrach, “Project Overview and Computational Needs to Measure Electric Dipole Moments at Storage Rings”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper MOAAI1, pp. 7-11.
[n] T. Sloan and T. Miller, “Design Considerations of the IUCF Cooler Dipole Magnet Vacuum Can”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B35, pp. 145-146.
[n] A. Murokh, C. Hall, J. Edelen, K. Wolfinger, M. Kravchenko, and M. Ruelas, “Surrogate Model Development for a Photoinjector”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA024, unpublished.
[n] H. S. Wang et al., “Study of the Combined Controller for Adjusting and Locking a Girder with Micrometer-level at NSRRC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP089, pp. 2921-2923.
[n] R. Macek, R. Hutson, D. Fitzgerald, S. Frankle, and C. Wilkinson, “Application of a Simple Analytical Model to Estimate Effectiveness of Radiation Shielding for Neutrons”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2216-2219.
[n] S. Coleman et al., “Longitudinal bunch shaping and optimization of the FAST injector”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1393-1395. doi:10.18429/JACoW-IPAC2023-TUPA023
[n] Q. Z. Xing et al., “Design of the 7MeV Linac Injector for the 200MeV Synchrotron of the Xi'an Proton Application Facility”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 426-428. doi:10.18429/JACoW-IPAC2016-MOPMW014
[n] R. Pitthan et al., “SLC Positron Source-Simulation and Performance”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2098-2101.
[n] H. Takahashi, N. Hayashi, Y. I. Itoh, M. Kawase, and Y. Sawabe, “Stabilization of Timing System Operation of J-PARC Linac and RCS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4000-4002. doi:10.18429/JACoW-IPAC2017-THPAB118
[n] G. Pei et al., “A 10 MeV L-band Linac for Irradiation Applications in China”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB046, pp. 276-278.
[n] G. Kasprowicz, J. M. Belleman, and U. Raich, “Digital Beam Trajectory and Orbit System, for the CERN Proton Synchrotron”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB09, pp. 75-77.
[n] A. Mondelli and D. Chernin, “Design Constraints for Electron-Positron Linear Colliders”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH451, pp. 730-732.
[n] D. Indurthy et al., “Ion Chamber Arrays for the NuMI Beam at Fermilab”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT072, pp. 3892-3894.
[n] Z. Wang, G. Wang, K. Chen, M. Hosaka, W. Xu, and Y. Yu, “Beam injection using a nonlinear kicker for the HLS-II storage ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1173-1175. doi:10.18429/JACoW-IPAC2023-MOPM085
[n] L. Groening, W. Barth, and D. A. Liakin, “Single Shot Measurements of the 4-Dimensional Transverse Phase Space Distribution of Intense Ion Beams at the UNILAC at GSI”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper CT02, pp. XX-XX.
[n] M. Johnson, J. Jones, and P. Williams, “Jitter tolerance for the FEBE beamline on CLARA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2071-2074. doi:10.18429/JACoW-IPAC2023-TUPL143
[n] S. Braccini, C. Belver-Aguilar, T. S. Carzaniga, G. Dellepiane, P. Haeffner, and P. Scampoli, “Novel Irradiation Methods for Theranostic Radioisotope Production With Solid Targets at the Bern Medical Cyclotron”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 127-131. doi:10.18429/JACoW-CYCLOTRONS2019-TUA02
[n] Y. Kitagawa et al., “Inverse Compton Scattering by Laser Accelerated Electrons and its Application to Standoff Detection of Hidden Objects”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD054, pp. 4404-4406.
[n] E. Syresin et al., “Development of MCP Based Photon Detectors for the European XFEL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC121, pp. 1299-1301.
[n] W. P. Leemans et al., “Laser Based Sub-Picosecond Electron Bunch Characterization Using 90$^{circ}$ Thomson Scattering”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7C004, pp. 1984-1986.
[n] J. Shaw et al., “A High Power Faraday Cup to Measure Extracted Beam Current from the Bates South Hall Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P073, pp. 2274-2289.
[n] W. Cheng, D. Gu, M. Zhang, Z. Zhu, and M. Zhao, “Suppression of microbunching instability based on optimized velocity bunching in linac-driven FELs”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2646-2649. doi:10.18429/JACoW-IPAC2023-WEPA002
[n] G. O. Bolme et al., “Operational Characteristics of a 100-mA, 2-MeV Radio-Frequency Quadrupole”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3118-3121.
[n] B. Tang, Q. S. Chen, T. Hu, J. Jiang, and Y. Q. Xiong, “Main Control System of the Linear Accelerator for the HUST THz-FEL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1858-1860. doi:10.18429/JACoW-IPAC2017-TUPIK070
[n] N. Samadi, L. D. Chapman, L. O. Dallin, and X. Shi, “Application of a Phase Space Beam Position and Size Monitor for Synchrotron Radiation”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4376-4379. doi:10.18429/JACoW-IPAC2019-FRXXPLS3
[n] Z. A. Conway et al., “Reduced-beta Cavities for High-intensity Compact Accelerators”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPLB07, pp. 458-460.
[n] P. Casolaro, S. Braccini, G. Dellepiane, A. Gottstein, I. Mateu, and P. Scampoli, “Time-Resolved Proton Beam Dosimetry for Ultra-High Dose-Rate Cancer Therapy (FLASH)”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 519-521. doi:10.18429/JACoW-IBIC2022-WE3C2
[n] J. Einstein-Curtis et al., “LLRF and pulse-to-pulse correction for a compact linac”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 270-272. doi:10.18429/JACoW-LINAC2024-MOPB102
[n] J. J. Li, H. M. Chen, K. Fan, Y. Song, P. Yang, and Y. T. Yang, “Conceptual design of a MeV Ultrafast Electron Diffraction Based on 1.4 Cell RF Gun”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3679-3681. doi:10.18429/JACoW-IPAC2019-THPGW043
[n] M. A. Allen and R. A. McConnell, “RF System Design for the SLAC Storage Ring”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 229-234.
[n] M. A. Green, W. Lau, S. P. Virostek, and S. Q. Yang, “Progress on the MICE Tracker Solenoid”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS114, pp. 2646-2648.
[n] P. Sunwong, P. Klysubun, S. Kongtawong, S. Krainara, T. Pulampong, and P. Sudmuang, “Minimization of Nonlinear Effects of Insertion Devices at SPS Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3515-3517. doi:10.18429/JACoW-IPAC2016-THPMR049
[n] X. Yang et al., “Online Optimization of NSLS-II Dynamic Aperture and Injection Transient”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1159-1162. doi:10.18429/JACoW-IPAC2022-TUPOPT064
[n] M. Kreider et al., “Launching the FAIR Timing System with CRYRING”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper TCO304, pp. 152-154.
[n] G. Cavallari et al., “Status of the RF Superconductivity at CERN”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93A06, pp. XX-XX.
[n] Y. Batygin et al., “MUSES Project of RIKEN RI Beam Factory”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP22F, pp. 529-531.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Sosin, H. Mainaud Durand, F. Micolon, V. Rude, and J. M. Rutkowski, “Robust Optical Instrumentation for Accelerator Alignment Using Frequency Scanning Interferometry”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2203-2206.
- F. Roncarolo et al., “Scattering of H- Stripped Electrons from SEM Grids and Wire Scanners at the CERN LINAC4”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB041, pp. 567-569.
- W. Xu et al., “Ridge Waveguide HOM Damping Scheme for High Current SRF Cavity”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2367-2369.
- S. Ishimoto, M. A. Green, Y. Kuno, W. Lau, S. Suzuki, and M. Y. Yoshida, “Liquid Hydrogen Absorber for MICE”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB065, pp. 421-423.
- F. Armborst, J. Kallestrup, M. I. Besana, and M. Paraliev, “SLS 2.0 machine protection”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM018, pp. 1019-1022.
- J. T. Volk, B. C. Brown, G. W. Foster, W. Fowler, H. D. Glass, and G. P. Jackson, “Time Evolution of Fields in Strontium Ferrite Permanent Magnets”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH001, pp. 3215-3217.
- J. S. Kolski, R. J. Macek, R. C. McCrady, and X. Pang, “Independent Component Analysis (ICA) Applied to Long Bunch Beams in the Los Alamos Proton Storage Ring”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR038, pp. 3018-3020.
- L. G. Cardoso, F. Alessio, J. Barbosa, C. Gaspar, R. Schwemmer, and P-Y. Duval, “A Framework for Hardware Integration in the LHCb Experiment Control System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 221-224.
- X. T. Wang et al., “Drive Laser Temporal Shaping Techniques for Shanghai Soft X-Ray Free Electron Laser”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 466-468.
- W. C. Sellyey and J. D. Gilpatrick, “A Compact Residual Gas Ionization Profile Monitor (RGIPM) System”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA122, pp. 2152-2154.
- E. L. Wright et al., “Test Results for a 10-MW, L-band, Multiple-beam Klystron for TESLA”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF077, pp. 1117-1119.
- M. Gusarova, I. I. Petrushina, E. A. Savin, N. P. Sobenin, and D. B. Tikhonov, “Biperiodic Accelerating Structure with Inner Coupling Cells with an Increased Coupling Coefficient”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC008, pp. 458-460.
- G. Blume et al., “A Compton transmission polarimeter for DC and SRF electron photo-injectors”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA004, pp. 3959-3961.
- B. Pritchard, J. Edelen, and M. Henderson, “Automation of sample alignment for neutron scattering experiments”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 258-260.
- F. Roncarolo, U. Raich, and F. Zocca, “Commissioning of the CERN LINAC4 Wire Scanner, Wire Grid and Slit-Grid Monitors at 3 and 12 MeV”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP034, pp. 502-505.
- P. Golonka et al., “Detector and Run Control Systems for the NA62 Fixed-Target Experiment at CERN”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 125-128.
- K. Jacobs et al., “High Duty Factor Beams Extracted from the MIT-Bates South Hall Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7W011, pp. 348-350.
- R. Schwemmer and N. Neufeld, “Implementing High Availability with COTS Components and Open-source Software”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WED005, pp. 624-626.
- K. Papke, C. R. Bahls, and U. van Rienen, “Arbitrary High-Order Discontinuous Galerkin Method for Electromagnetic Field Problems”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper FRAAC2, pp. 275-277.
- S. Braccini, P. Casolaro, G. Dellepiane, A. Gottstein, I. Mateu, and P. Scampoli, “Accelerator and Detector Developments for the Production of Theranostic Radioisotopes with Solid Targets at the Bern Medical Cyclotron”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper WEBO06, pp. 196-199.
- M. A. Allen et al., “Relativistic Klystron Research for High Gradient Accelerators”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 121-127.
- T. Overton, J. Jones, T. Pacey, L. Reid, and E. Snedden, “Simulation study of beam-driven plasma wakefield experiments on CLARA”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM086, this conference.
- A. Ageyev et al., “STATUS OF SUPERCONDUCTING RADIOFREQUENCY SEPARATOR CRYOGENIC SYSTEM”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THFO04, pp. XX-XX.
- C. McGuinness et al., “Fabrication and Measurements of a Silicon Woodpile Accelerator Structure”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP133, pp. 343-345.
- C. Madec et al., “The Challenge to Assemble 100 Cryomodules for the European E-XFEL”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THIOA02, pp. 816-820.
- A. Moretti et al., “An 805 MHz Disk and Washer Structure for the Fermilab Linac Upgrade”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-41, pp. 143-145.
- D. Li et al., “High Power RF Test of an 805 MHz RF Cavity for a Muon Cooling Channel”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO010, pp. 2160-2162.
- J. Zeng et al., “Cooling Design for the FRIB RFQ Cavity at Michigan State University”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3271-3273.
- R. J. England et al., “Manufacture and Testing of Optical-scale Accelerator Structures from Silicon and Silica”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUYB02, pp. 1050-1053.
- A. Lehrach, “Project Overview and Computational Needs to Measure Electric Dipole Moments at Storage Rings”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper MOAAI1, pp. 7-11.
- T. Sloan and T. Miller, “Design Considerations of the IUCF Cooler Dipole Magnet Vacuum Can”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B35, pp. 145-146.
- A. Murokh, C. Hall, J. Edelen, K. Wolfinger, M. Kravchenko, and M. Ruelas, “Surrogate Model Development for a Photoinjector”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA024, unpublished.
- H. S. Wang et al., “Study of the Combined Controller for Adjusting and Locking a Girder with Micrometer-level at NSRRC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPP089, pp. 2921-2923.
- R. Macek, R. Hutson, D. Fitzgerald, S. Frankle, and C. Wilkinson, “Application of a Simple Analytical Model to Estimate Effectiveness of Radiation Shielding for Neutrons”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2216-2219.
- S. Coleman et al., “Longitudinal bunch shaping and optimization of the FAST injector”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA023, pp. 1393-1395.
- Q. Z. Xing et al., “Design of the 7MeV Linac Injector for the 200MeV Synchrotron of the Xi'an Proton Application Facility”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 426-428.
- R. Pitthan et al., “SLC Positron Source-Simulation and Performance”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2098-2101.
- H. Takahashi, N. Hayashi, Y. I. Itoh, M. Kawase, and Y. Sawabe, “Stabilization of Timing System Operation of J-PARC Linac and RCS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4000-4002.
- G. Pei et al., “A 10 MeV L-band Linac for Irradiation Applications in China”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB046, pp. 276-278.
- G. Kasprowicz, J. M. Belleman, and U. Raich, “Digital Beam Trajectory and Orbit System, for the CERN Proton Synchrotron”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB09, pp. 75-77.
- A. Mondelli and D. Chernin, “Design Constraints for Electron-Positron Linear Colliders”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH451, pp. 730-732.
- D. Indurthy et al., “Ion Chamber Arrays for the NuMI Beam at Fermilab”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPT072, pp. 3892-3894.
- Z. Wang, G. Wang, K. Chen, M. Hosaka, W. Xu, and Y. Yu, “Beam injection using a nonlinear kicker for the HLS-II storage ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM085, pp. 1173-1175.
- L. Groening, W. Barth, and D. A. Liakin, “Single Shot Measurements of the 4-Dimensional Transverse Phase Space Distribution of Intense Ion Beams at the UNILAC at GSI”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper CT02, pp. XX-XX.
- M. Johnson, J. Jones, and P. Williams, “Jitter tolerance for the FEBE beamline on CLARA”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL143, pp. 2071-2074.
- S. Braccini, C. Belver-Aguilar, T. S. Carzaniga, G. Dellepiane, P. Haeffner, and P. Scampoli, “Novel Irradiation Methods for Theranostic Radioisotope Production With Solid Targets at the Bern Medical Cyclotron”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 127-131.
- Y. Kitagawa et al., “Inverse Compton Scattering by Laser Accelerated Electrons and its Application to Standoff Detection of Hidden Objects”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD054, pp. 4404-4406.
- E. Syresin et al., “Development of MCP Based Photon Detectors for the European XFEL”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC121, pp. 1299-1301.
- W. P. Leemans et al., “Laser Based Sub-Picosecond Electron Bunch Characterization Using 90$^{circ}$ Thomson Scattering”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7C004, pp. 1984-1986.
- J. Shaw et al., “A High Power Faraday Cup to Measure Extracted Beam Current from the Bates South Hall Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P073, pp. 2274-2289.
- W. Cheng, D. Gu, M. Zhang, Z. Zhu, and M. Zhao, “Suppression of microbunching instability based on optimized velocity bunching in linac-driven FELs”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA002, pp. 2646-2649.
- G. O. Bolme et al., “Operational Characteristics of a 100-mA, 2-MeV Radio-Frequency Quadrupole”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3118-3121.
- B. Tang, Q. S. Chen, T. Hu, J. Jiang, and Y. Q. Xiong, “Main Control System of the Linear Accelerator for the HUST THz-FEL”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1858-1860.
- N. Samadi, L. D. Chapman, L. O. Dallin, and X. Shi, “Application of a Phase Space Beam Position and Size Monitor for Synchrotron Radiation”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4376-4379.
- Z. A. Conway et al., “Reduced-beta Cavities for High-intensity Compact Accelerators”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPLB07, pp. 458-460.
- P. Casolaro, S. Braccini, G. Dellepiane, A. Gottstein, I. Mateu, and P. Scampoli, “Time-Resolved Proton Beam Dosimetry for Ultra-High Dose-Rate Cancer Therapy (FLASH)”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 519-521.
- J. Einstein-Curtis et al., “LLRF and pulse-to-pulse correction for a compact linac”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 270-272.
- J. J. Li, H. M. Chen, K. Fan, Y. Song, P. Yang, and Y. T. Yang, “Conceptual design of a MeV Ultrafast Electron Diffraction Based on 1.4 Cell RF Gun”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3679-3681.
- M. A. Allen and R. A. McConnell, “RF System Design for the SLAC Storage Ring”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 229-234.
- M. A. Green, W. Lau, S. P. Virostek, and S. Q. Yang, “Progress on the MICE Tracker Solenoid”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS114, pp. 2646-2648.
- P. Sunwong, P. Klysubun, S. Kongtawong, S. Krainara, T. Pulampong, and P. Sudmuang, “Minimization of Nonlinear Effects of Insertion Devices at SPS Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3515-3517.
- X. Yang et al., “Online Optimization of NSLS-II Dynamic Aperture and Injection Transient”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1159-1162.
- M. Kreider et al., “Launching the FAIR Timing System with CRYRING”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper TCO304, pp. 152-154.
- G. Cavallari et al., “Status of the RF Superconductivity at CERN”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93A06, pp. XX-XX.
- Y. Batygin et al., “MUSES Project of RIKEN RI Beam Factory”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP22F, pp. 529-531.
Back to search