Favourites
For Word
[n] A. I. Papash, A. A. Alzeanidi, M. O. A. El Ghazaly, K.-U. Kuehnel, and C. P. Welsch, “On the Possibility of Realizing Shortest Bunches in Low-energy Storage Rings”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC116, pp. 334-336.
[n] A. Sanz Ull, M. G. Atanasov, B. Balhan, and J. C. C. M, “Alternative Proposal for FCC-hh Extraction Septa”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4248-4251. doi:10.18429/JACoW-IPAC2019-THPTS062
[n] N. G. Tolstun, A. S. Ivanov, V. P. Ovchinnikov and M. P. Svinin, “Further Development of Irradiation Field Forming Systems of Industrial Electron Accelerators”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH040, pp. 2005-2007.
[n] T. Sen and M. P. Zorzano, “Emittance Growth of the LHC Beam due to the Effect of Head-on Beam-Beam Interaction and Ground Motion”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP7B07, pp. 1226-1228.
[n] J. Rudolph, M. Abo-Bakr, T. Kamps, and J. Teichert, “Slice-Emittance Measurements at ELBE / SRF-Injector”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD50, pp. 416-418.
[n] J. Thibus and A. Schempp, “Simulations for the Frankfurt Funneling Experiment”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS043, pp. 1591-1593.
[n] L. Thorndahl, “Multi-frequency Acceleration for the CLIC Drive Linac with Beam Loading and HOM Compensation”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1138-1141.
[n] S. Jin, J. Gao, T. Omori, and P. Sievers, “Numerical Analysis of Stresses for the Target of the ILC 300 Hz Conventional Positron Source”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3838-3840. doi:10.18429/JACoW-IPAC2016-THPOR028
[n] J. H. Shao, H. B. Chen, C. Gong, J. Shi, X. W. Wu, and S. X. Zheng, “Tuning of an S-Band 10 MeV Traveling-Wave Accelerating Structure with a Non-uniform Section”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4233-4235. doi:10.18429/JACoW-IPAC2017-THPIK060
[n] E. Johnson et al., “Beam optics modelling of slow-extracted very high-energy heavy ions from the CERN Proton Synchrotron for radiation effects testing”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3560-3563. doi:10.18429/JACoW-IPAC2024-THPR30
[n] V. Balandin, W. Decking, and N. Golubeva, “Expressing Properties of BPM Measurement System in Terms of Error Emittance and Error Twiss Parameters”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD12, pp. 62-64.
[n] C. J. Gardner et al., “Setup and Performance of the RHIC Injector Accelerators for the 2005 Run with Copper Ions”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE029, pp. 2068-2070.
[n] I. Balossino et al., “Strain measurements of the Apple-X SABINA undulator with fiber Bragg grating”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3777-3780. doi:10.18429/JACoW-IPAC2024-THPS21
[n] Y. L. Huang, J. Guo, R. A. Rimmer, H. Wang, and S. Wang, “Ultra-Fast Harmonic Resonant Kicker Design for the MEIC Electron Circular Cooler Ring”, in Proc. ERL'15, Stony Brook, NY, USA, Jun. 2015, pp. 75-79. doi:10.18429/JACoW-ERL2015-WEICLH2063
[n] Y.-N. Rao, R. A. Baartman, I. V. Bylinskii, V. A. Verzilov, and J. M. Schippers, “TRIUMF Extraction Foil Developments and Contamination Reduction”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TU3PB04, pp. 269-271.
[n] P. J. Bryant, “AUSTRON, A Central European Pulsed Spallation Neutron Source”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THXF204, pp. 108-112.
[n] J. A. Holmes, W. Wan, N. Catalan-Lasheras, A. V. Fedotov, I. Papaphilippou, and J. Wei, “SNS Ring Optics Tuning”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH307, pp. 3618-3620.
[n] M. Pont et al., “Injector Design for ALBA”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS057, pp. 3413-3415.
[n] H. Harada, K. Yamamoto, and M. Yoshimoto, “Upgrade of Ionization Profile Monitor (IPM) in the J-PARC 3-GeV RCS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR029, pp. 840-842.
[n] P. Kneisel, G. Ciovati, K. Davis, K. Macha, and J. Mammosser, “Superconducting Prototype Cavities for the Spallation Neutron Source (SNS) Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO015, pp. 2247-2249.
[n] V. Volkov et al., “Thermo-Cathode RF Gun for BINP Race-Track Microtron-Recuperator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC094, pp. 2213-2215.
[n] S. V. Mitrofanov et al., “FLNR JINR Accelerator Complex for Applied Physics Researches: State-of-Art and Future”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 358-360. doi:10.18429/JACoW-CYCLOTRONS2019-FRB02
[n] A-M. Valente et al., “Production and Performance of the CEBAF Upgrade Cryomodule Intermediate Prototypes”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF072, pp. 1105-1107.
[n] G.-T. Park, J. Guo, F. Marhauser, R. A. Rimmer, H. Wang, and S. Wang, “Beam Impedance Study on a Harmonic Kicker for the CCR of JLEIC”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 116-119. doi:10.18429/JACoW-ERL2019-WEPNEC22
For LaTeX
Use Complete Form
For BibTeX
References
- A. I. Papash, A. A. Alzeanidi, M. O. A. El Ghazaly, K.-U. Kuehnel, and C. P. Welsch, “On the Possibility of Realizing Shortest Bunches in Low-energy Storage Rings”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC116, pp. 334-336.
- A. Sanz Ull, M. G. Atanasov, B. Balhan, and J. C. C. M, “Alternative Proposal for FCC-hh Extraction Septa”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4248-4251.
- N. G. Tolstun, A. S. Ivanov, V. P. Ovchinnikov and M. P. Svinin, “Further Development of Irradiation Field Forming Systems of Industrial Electron Accelerators”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH040, pp. 2005-2007.
- T. Sen and M. P. Zorzano, “Emittance Growth of the LHC Beam due to the Effect of Head-on Beam-Beam Interaction and Ground Motion”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP7B07, pp. 1226-1228.
- J. Rudolph, M. Abo-Bakr, T. Kamps, and J. Teichert, “Slice-Emittance Measurements at ELBE / SRF-Injector”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD50, pp. 416-418.
- J. Thibus and A. Schempp, “Simulations for the Frankfurt Funneling Experiment”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS043, pp. 1591-1593.
- L. Thorndahl, “Multi-frequency Acceleration for the CLIC Drive Linac with Beam Loading and HOM Compensation”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1138-1141.
- S. Jin, J. Gao, T. Omori, and P. Sievers, “Numerical Analysis of Stresses for the Target of the ILC 300 Hz Conventional Positron Source”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3838-3840.
- J. H. Shao, H. B. Chen, C. Gong, J. Shi, X. W. Wu, and S. X. Zheng, “Tuning of an S-Band 10 MeV Traveling-Wave Accelerating Structure with a Non-uniform Section”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4233-4235.
- E. Johnson et al., “Beam optics modelling of slow-extracted very high-energy heavy ions from the CERN Proton Synchrotron for radiation effects testing”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR30, pp. 3560-3563.
- V. Balandin, W. Decking, and N. Golubeva, “Expressing Properties of BPM Measurement System in Terms of Error Emittance and Error Twiss Parameters”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD12, pp. 62-64.
- C. J. Gardner et al., “Setup and Performance of the RHIC Injector Accelerators for the 2005 Run with Copper Ions”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE029, pp. 2068-2070.
- I. Balossino et al., “Strain measurements of the Apple-X SABINA undulator with fiber Bragg grating”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS21, pp. 3777-3780.
- Y. L. Huang, J. Guo, R. A. Rimmer, H. Wang, and S. Wang, “Ultra-Fast Harmonic Resonant Kicker Design for the MEIC Electron Circular Cooler Ring”, in Proc. 56th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'15), Stony Brook, NY, USA, Jun. 2015, pp. 75-79.
- Y.-N. Rao, R. A. Baartman, I. V. Bylinskii, V. A. Verzilov, and J. M. Schippers, “TRIUMF Extraction Foil Developments and Contamination Reduction”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TU3PB04, pp. 269-271.
- P. J. Bryant, “AUSTRON, A Central European Pulsed Spallation Neutron Source”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THXF204, pp. 108-112.
- J. A. Holmes, W. Wan, N. Catalan-Lasheras, A. V. Fedotov, I. Papaphilippou, and J. Wei, “SNS Ring Optics Tuning”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH307, pp. 3618-3620.
- M. Pont et al., “Injector Design for ALBA”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS057, pp. 3413-3415.
- H. Harada, K. Yamamoto, and M. Yoshimoto, “Upgrade of Ionization Profile Monitor (IPM) in the J-PARC 3-GeV RCS”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR029, pp. 840-842.
- P. Kneisel, G. Ciovati, K. Davis, K. Macha, and J. Mammosser, “Superconducting Prototype Cavities for the Spallation Neutron Source (SNS) Project”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPDO015, pp. 2247-2249.
- V. Volkov et al., “Thermo-Cathode RF Gun for BINP Race-Track Microtron-Recuperator”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC094, pp. 2213-2215.
- S. V. Mitrofanov et al., “FLNR JINR Accelerator Complex for Applied Physics Researches: State-of-Art and Future”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 358-360.
- A-M. Valente et al., “Production and Performance of the CEBAF Upgrade Cryomodule Intermediate Prototypes”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF072, pp. 1105-1107.
- G.-T. Park, J. Guo, F. Marhauser, R. A. Rimmer, H. Wang, and S. Wang, “Beam Impedance Study on a Harmonic Kicker for the CCR of JLEIC”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 116-119.
Back to search