Favourites
For Word
[n] T. Akagi et al., “Completion of Phase B+ beam commissioning of Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 705-708. doi:10.18429/JACoW-LINAC2024-THPB036
[n] X. Y. Li, Y. Jiao, H. H. Lu, and S. K. Tian, “Status of HEPS Insertion Devices Design”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 339-341. doi:10.18429/JACoW-IPAC2021-MOPAB090
[n] E. Acerbi, G. C. Rivoltella, L. Rossi, and G. Raia, “The Beam Diagnostics of the Milan K800 Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F5-03, pp. 283-286.
[n] Y. Shobuda et al., “A Kicker Impedance Reduction Scheme with Diode Stack and Resistor at the RCS in J-PARC”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 162-169. doi:10.18429/JACoW-HB2023-TUC4I1
[n] H. C. Chen, C. L. Chen, H. H. Chen, C. H. Kuo, and Y. K. Lin, “Observation of Beam Disturbance Caused by ID Gap Variation at TLS Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4598-4600. doi:10.18429/JACoW-IPAC2017-THPVA067
[n] S. J. Payne and S. A. Whitehead, “Fine Spatial Beam Loss Monitoring for the ISIS Proton Synchrotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH035, pp. 1079-1081.
[n] E. Calvo Giraldo et al., “The LHC Beam Position System: Performance during 2010 and Outlook for 2011”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD12, pp. 323-325.
[n] V. Tympel et al., “Creation of the First High-Inductance Sensor of the New CCC-Sm Series”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 469-472. doi:10.18429/JACoW-IBIC2022-WEP30
[n] U. Pudasaini, “Nb3Sn SRF cavities: from R&D to real accelerator – overview of recent developments”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper FRXD1, unpublished.
[n] V. I. Bobylev, “Operation of the Linac-Injector Modulator into a Mismatched Load”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper P03, pp. 314-317.
[n] S. Busold and H. R?â, “Beam Intensity Modulation Capabilities for Varian's ProBeamreg; Isochronous Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 313-315. doi:10.18429/JACoW-Cyclotrons2016-THP05
[n] R. J. Steinhagen, A. Boccardi, E. Calvo Giraldo, M. Gasior, J. L. Gonzalez, and O. R. Jones, “Continuous Measurement and Control of Beta-Beating in the LHC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE062, pp. 1119-1121.
[n] P. Berkvens, P. Colomp, P. Mackrill, J. P. Magnien, F. Nolte, and D. Salieti, “Radiation Safety Around the ESRF Beamlines”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP028L, pp. 2618-2620.
[n] D. Sertore, E. Cavaliere, M. Fusetti, P. Michelato, C. Pagani, and P. Pierini, “High Pressure Rinsing Water Jet Characterization”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH169, pp. 460-462.
[n] E. V. Ivanov, A. O. Sidorin, Z. I. Smirnova, and L. A. Svetov, “Quench Detector for Superconducting Elements of the NICA Accelerator Complex”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC35, pp. 398-400.
[n] G. G. Gulbekyan et al., “The Project of the HV Axial Injection for the DC-280 Cyclotron at the FLNR JINR”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC08, pp. 333-335.
[n] S. Di Mitri et al., “Emittance Control in the Presence of Collective Effects in the FERMI@Elettra Free Electron Laser Linac Driver”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOOCNO01, pp. 6-11.
[n] K. Gollwitzer, “Run II Luminosity Progress”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEZAKI01, pp. 1922-1926.
[n] P. F. Tavares, F. Arroyo, R. H. A. Farias, L. C. Jahnel, C. Pardine, and C. Rodrigues, “Injector Improvements at the Brazilian Synchrotron Light Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN005, pp. 152-154.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Akagi et al., “Completion of Phase B+ beam commissioning of Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 705-708.
- X. Y. Li, Y. Jiao, H. H. Lu, and S. K. Tian, “Status of HEPS Insertion Devices Design”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 339-341.
- E. Acerbi, G. C. Rivoltella, L. Rossi, and G. Raia, “The Beam Diagnostics of the Milan K800 Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F5-03, pp. 283-286.
- Y. Shobuda et al., “A Kicker Impedance Reduction Scheme with Diode Stack and Resistor at the RCS in J-PARC”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper TUC4I1, pp. 162-169.
- H. C. Chen, C. L. Chen, H. H. Chen, C. H. Kuo, and Y. K. Lin, “Observation of Beam Disturbance Caused by ID Gap Variation at TLS Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4598-4600.
- S. J. Payne and S. A. Whitehead, “Fine Spatial Beam Loss Monitoring for the ISIS Proton Synchrotron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH035, pp. 1079-1081.
- E. Calvo Giraldo et al., “The LHC Beam Position System: Performance during 2010 and Outlook for 2011”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD12, pp. 323-325.
- V. Tympel et al., “Creation of the First High-Inductance Sensor of the New CCC-Sm Series”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 469-472.
- U. Pudasaini, “Nb3Sn SRF cavities: from R&D to real accelerator – overview of recent developments”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper FRXD1, unpublished.
- V. I. Bobylev, “Operation of the Linac-Injector Modulator into a Mismatched Load”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper P03, pp. 314-317.
- S. Busold and H. R?â, “Beam Intensity Modulation Capabilities for Varian's ProBeamreg; Isochronous Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 313-315.
- R. J. Steinhagen, A. Boccardi, E. Calvo Giraldo, M. Gasior, J. L. Gonzalez, and O. R. Jones, “Continuous Measurement and Control of Beta-Beating in the LHC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE062, pp. 1119-1121.
- P. Berkvens, P. Colomp, P. Mackrill, J. P. Magnien, F. Nolte, and D. Salieti, “Radiation Safety Around the ESRF Beamlines”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP028L, pp. 2618-2620.
- D. Sertore, E. Cavaliere, M. Fusetti, P. Michelato, C. Pagani, and P. Pierini, “High Pressure Rinsing Water Jet Characterization”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH169, pp. 460-462.
- E. V. Ivanov, A. O. Sidorin, Z. I. Smirnova, and L. A. Svetov, “Quench Detector for Superconducting Elements of the NICA Accelerator Complex”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC35, pp. 398-400.
- G. G. Gulbekyan et al., “The Project of the HV Axial Injection for the DC-280 Cyclotron at the FLNR JINR”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC08, pp. 333-335.
- S. Di Mitri et al., “Emittance Control in the Presence of Collective Effects in the FERMI@Elettra Free Electron Laser Linac Driver”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper MOOCNO01, pp. 6-11.
- K. Gollwitzer, “Run II Luminosity Progress”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEZAKI01, pp. 1922-1926.
- P. F. Tavares, F. Arroyo, R. H. A. Farias, L. C. Jahnel, C. Pardine, and C. Rodrigues, “Injector Improvements at the Brazilian Synchrotron Light Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN005, pp. 152-154.
Back to search