Favourites
For Word
[n] H. Hahn and R. C. Fernow, “Superconducting Combined Function Magnets”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3402-3405.
[n] C. Antuono et al., “Beam impedance investigation of the elliptical interconnecting vacuum modules of the LHC and prospect for HL-LHC”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPM075, unpublished.
[n] V. Kashikhin et al., “Field Quality of the Fermilab Nb3Sn Cos-theta Dipole Models”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE020, pp. 2403-2405.
[n] A. V. Zlobin et al., “Development of Cos-Theta Nb3Sn Dipole Magnets for VLHC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH085, pp. 3427-3429.
[n] G. R. White, D. Schulte, and N. J. Walker, “Design and Simulation of the ILC Intra-train Orbit and Luminosity Feedback Systems”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH104, pp. 3041-3043.
[n] V. Kashikhin et al., “Field Quality Study in Nb3Sn Accelerator Magnets”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOAA004, pp. 366-368.
[n] Y. Ohnishi et al., “Optics Measurements and Corrections at the Early Commissioning of SuperKEKB”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3782-3784. doi:10.18429/JACoW-IPAC2016-THPOR007
[n] R. C. Fernow and J. C. Gallardo, “Front-End Design Studies for a Muon Collider”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP040, pp. 2610-2612.
[n] A. Wu, “Investigation of Oxide Layer Structure on Niobium Surfaces Using a Secondary Ion Mass Spectrometer”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP08, pp. 251-253.
[n] P. Bauer et al., “Analysis of the b2 Correction in the Tevatron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB055, pp. 1730-1732.
[n] V. V. Kashikhin and A. V. Zlobin, “Nb3Sn Arc Quadrupole Magnets for VLHC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH080, pp. 3412-3414.
[n] M. G. Billing, M. J. Forster, and H. A. Williams, “Model Independent Analysis with Coupled Beam Motion”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP028, pp. 3759-3761.
[n] D. F. Orris and R. Carcagno, “A Modular and Extensible Data Acquisition and Control System for Testing Superconducting Magnets”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH098, pp. 3463-3465.
[n] M. G. Billing et al., “Measurement Techniques to Characterize Instabilities Caused by Electron Clouds”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP194, pp. 1852-1854.
[n] E. Donoghue et al., “Studies of Electron Activities in SNS-Type Superconducting RF Cavities”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP67, pp. 402-405.
[n] G. R. White, S. Molloy, and M. Woodley, “Beam-Based Alignment, Tuning and Beam Dynamics Studies for the ATF2 Extraction Line and Final Focus System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP039, pp. 634-636.
[n] B. Zhang, C. Chen, X. Li, S. Wang, and R. Yang, “Preliminary commissioning results of the LW prototype at CSNS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM055, unpublished.
[n] J. M. Nogiec et al., “A Highly Configurable and Scriptable Software System for Fully Automated Tuning of Accelerator Cavities”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA15, pp. 1262-1264.
[n] J. Henderson, D. J. Dunning, and B. W. J. McNeil, “Beam Quality and Transport Stability Simulations in Echo Enabled Harmonic Generation”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper MOPB32, pp. 99-102.
[n] ?à. Andersson, O. V. Chubar, A. Luedeke, M. Rohrer, V. Schlott, and A. Streun, “Recent Results from the Electron Beam Profile Monitor at the Swiss Light Source”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB27, pp. 129-131.
[n] T. Margreiter et al., “Magnetic field control in the MedAustron synchrotron”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM001, unpublished.
[n] B. Lam et al., “ATF2 High Availability Power Supplies”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP127, pp. 3658-3660.
[n] P. Schlabach et al., “Field Quality of the Fermilab Nb3Sn High Field Dipole Model”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH082, pp. 3418-3420.
[n] L. Hansborough, E. Bush, and V. Hart, “Mechanical Technologies for PIGMI”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3770-3773.
[n] B. F. Milton et al., “First Beam in a New Compact Intense 30 MeVH- cyclotron for Isotope Production”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1812-1815.
[n] F. Eoz?®nou et al., “Vertical Electro-Polishing of 704 MHz Resonators Using Ninja Cathode: First Results”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 431. doi:10.18429/JACoW-SRF2021-TUPCAV001
[n] N. Y. Joshi et al., “Analysis of RF System Stability on CLARA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4053-4056. doi:10.18429/JACoW-IPAC2019-THPRB097
[n] H. Jang, D. H. Gil, Y. Jung, H. Kim, Y. Kim, and M. Lee, “Development of a Digital LLRF System for SRF Cavities in RAON Accelerator”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 845. doi:10.18429/JACoW-SRF2021-THPTEV008
[n] R. C. Fernow, “Recent Developments on the Muon-Facility Design Code ICOOL”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP041, pp. 2651-2653.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Hahn and R. C. Fernow, “Superconducting Combined Function Magnets”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3402-3405.
- C. Antuono et al., “Beam impedance investigation of the elliptical interconnecting vacuum modules of the LHC and prospect for HL-LHC”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPM075, this conference.
- V. Kashikhin et al., “Field Quality of the Fermilab Nb3Sn Cos-theta Dipole Models”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE020, pp. 2403-2405.
- A. V. Zlobin et al., “Development of Cos-Theta Nb3Sn Dipole Magnets for VLHC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH085, pp. 3427-3429.
- G. R. White, D. Schulte, and N. J. Walker, “Design and Simulation of the ILC Intra-train Orbit and Luminosity Feedback Systems”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH104, pp. 3041-3043.
- V. Kashikhin et al., “Field Quality Study in Nb3Sn Accelerator Magnets”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOAA004, pp. 366-368.
- Y. Ohnishi et al., “Optics Measurements and Corrections at the Early Commissioning of SuperKEKB”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3782-3784.
- R. C. Fernow and J. C. Gallardo, “Front-End Design Studies for a Muon Collider”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP040, pp. 2610-2612.
- A. Wu, “Investigation of Oxide Layer Structure on Niobium Surfaces Using a Secondary Ion Mass Spectrometer”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP08, pp. 251-253.
- P. Bauer et al., “Analysis of the b2 Correction in the Tevatron”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB055, pp. 1730-1732.
- V. V. Kashikhin and A. V. Zlobin, “Nb3Sn Arc Quadrupole Magnets for VLHC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH080, pp. 3412-3414.
- M. G. Billing, M. J. Forster, and H. A. Williams, “Model Independent Analysis with Coupled Beam Motion”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP028, pp. 3759-3761.
- D. F. Orris and R. Carcagno, “A Modular and Extensible Data Acquisition and Control System for Testing Superconducting Magnets”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH098, pp. 3463-3465.
- M. G. Billing et al., “Measurement Techniques to Characterize Instabilities Caused by Electron Clouds”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP194, pp. 1852-1854.
- E. Donoghue et al., “Studies of Electron Activities in SNS-Type Superconducting RF Cavities”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP67, pp. 402-405.
- G. R. White, S. Molloy, and M. Woodley, “Beam-Based Alignment, Tuning and Beam Dynamics Studies for the ATF2 Extraction Line and Final Focus System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP039, pp. 634-636.
- B. Zhang, C. Chen, X. Li, S. Wang, and R. Yang, “Preliminary commissioning results of the LW prototype at CSNS”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM055, this conference.
- J. M. Nogiec et al., “A Highly Configurable and Scriptable Software System for Fully Automated Tuning of Accelerator Cavities”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA15, pp. 1262-1264.
- J. Henderson, D. J. Dunning, and B. W. J. McNeil, “Beam Quality and Transport Stability Simulations in Echo Enabled Harmonic Generation”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper MOPB32, pp. 99-102.
- ?à. Andersson, O. V. Chubar, A. Luedeke, M. Rohrer, V. Schlott, and A. Streun, “Recent Results from the Electron Beam Profile Monitor at the Swiss Light Source”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB27, pp. 129-131.
- T. Margreiter et al., “Magnetic field control in the MedAustron synchrotron”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM001, this conference.
- B. Lam et al., “ATF2 High Availability Power Supplies”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP127, pp. 3658-3660.
- P. Schlabach et al., “Field Quality of the Fermilab Nb3Sn High Field Dipole Model”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH082, pp. 3418-3420.
- L. Hansborough, E. Bush, and V. Hart, “Mechanical Technologies for PIGMI”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3770-3773.
- B. F. Milton et al., “First Beam in a New Compact Intense 30 MeVH- cyclotron for Isotope Production”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1812-1815.
- F. Eoz?®nou et al., “Vertical Electro-Polishing of 704 MHz Resonators Using Ninja Cathode: First Results”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 431.
- N. Y. Joshi et al., “Analysis of RF System Stability on CLARA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4053-4056.
- H. Jang, D. H. Gil, Y. Jung, H. Kim, Y. Kim, and M. Lee, “Development of a Digital LLRF System for SRF Cavities in RAON Accelerator”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 845.
- R. C. Fernow, “Recent Developments on the Muon-Facility Design Code ICOOL”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP041, pp. 2651-2653.
Back to search