Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C.-C. Kuo et al., “Impedance Study with Single Bunch Beam at Taiwan Photon Source”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 630-633. doi:10.18429/JACoW-IPAC2016-MOPOR016
[n] G. Y. Kong and W. Zhou, “The Backward Mode in an Electromagnetically Pumped Free Electron Laser”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1211-1214.
[n] G. Ryckewaert, “STATUS OF THE CYCLONE FACILITY”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20C4, pp. XX-XX.
[n] P. N. Chirkov and Yu. I. Kirochkin, “THE GEODESIC NETWORK CONSTRUCTION IN U-70 SYNCHROTRON BY EQUALIZATION VIA THE CORRELATES METHOD”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THBP10, pp. XX-XX.
[n] G. Thomas, K. Azarov, R. Barill?¿re, S. Cabaret, N. Kulman, and J. Rochez, “LHC GCS A framework for the production of 23 homogeneous control systems”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_042.
[n] J. Li et al., “CSNS Linac RF System Design and R&D Progress”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP046, pp. 863-865.
[n] M. E. Read, G. Collins, P. Ferguson, L. R. Ives, R. H. Jackson, and D. Marsden, “10 MW, L-Band, Annular Beam Klystron for Accelerator Applications”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO09, pp. 948-950.
[n] C. Narug et al., “Successful cleanroom installation of PIP-II SSR2 coupler using robotic arm”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 168-170. doi:10.18429/JACoW-LINAC2024-MOPB056
[n] R. D?Âlling and M. Rohrer, “A 4D Emittance Measurement Device for the 870 keV HIPA Injection Line”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 329-333. doi:10.18429/JACoW-HB2018-WEP2PO030
[n] S. Kersten et al., “Control, Safety and Diagnostics for Future ATLAS Pixel Detectors”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC050, pp. 679-682.
[n] F. Lin, Y. S. Derbenev, A. Hutton, V. S. Morozov, F. C. Pilat, and Y. Zhang, “Towards a Small Emittance Design of the JLEIC Electron Collider Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2457-2459. doi:10.18429/JACoW-IPAC2016-WEPMW016
[n] D. E. Kim et al., “Development of PAL-XFEL Undulator System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4044-4046. doi:10.18429/JACoW-IPAC2016-THPOW045
[n] M. P. Howell et al., “The First ASME Code Stamped Cryomodule at SNS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC106, pp. 2465-2467.
[n] J. L. Lamaack et al., “New Beam Position Monitor System for PETRA IV”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper MOP021, unpublished.
[n] Y. L. Zhao et al., “Dynamic Comparison With XAL and Tracewin Based on the Injector-I of China ADS Test Stand”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3572-3574. doi:10.18429/JACoW-IPAC2014-THPME138
[n] T. Lamy, J. Angot, C. Fourel, and T. Thuillier, “New Configuration and Results with the LPSC Charge Breeder”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper WECO-A01, pp. 180-182.
[n] Y. Jongen and G. Ryckewaert, “Preliminary Design for a 30 MeV, 500 muA H- Cyclotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2703-2706.
[n] D. Saez de Jauregui et al., “Characterization of Vacuum Chamber Samples for Superconducting Insertion Devices”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP070, pp. 723-725.
[n] M. Loiselet, N. Postiau, and G. Ryckewaert, “Status Report of Cyclone”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper I-16, pp. 82-85.
[n] Y. Jongen and G. Ryckewaert, “Status Report of Cyclone”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper A-10, pp. 80-83.
[n] M. T. Crofford, S. W. Lee, J. A. Ball, T. L. Davidson, T. W. Hardek, and M. F. Piller, “Spallation Neutron Source LLRF Temperature Dependence and Solution”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP088, pp. 259-261.
[n] F. Yan, H. Geng, C. Meng, H. F. Ouyang, S. Pei, and Y. L. Zhao, “ADS Injector I Frequency Choice at IHEP”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 265-268. doi:10.18429/JACoW-IPAC2015-MOPWA061
[n] X. Gao, A. Shi, Z. Yin, and J. Zhong, “A Novel Monostructure Buncher for HIRFL”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F7-07, pp. 401-403.
[n] K. Jimbo, Z. Q. He, M. Nakao, A. Noda, H. Souda, and H. Tongu, “Analysis of Frequency Spectrum of Bunched Beam Related to Transverse Laser Cooling”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD011, pp. 391-393.
[n] M. C. L. Buzio et al., “Development of Upgraded Magnetic Instrumentation for CERN's Real-time Reference Field Measurement Systems”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB016, pp. 310-312.
[n] F. Hinode et al., “Design of a 1.5 GeV Storage Ring for the Integrated Photon Source Project at Tohoku University”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP14015, pp. XX-XX.
[n] S. Karabekyan, S. Abeghyan, J. Pflueger, and M. Yakopov, “Experience Gained during the Commissioning of the Undulator Control System at the European XFEL”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 148-150. doi:10.18429/JACoW-PCAPAC2016-FRITPLCO04
[n] X. Zhou, T. Natsui, Y. Ogawa, and M. Yoshida, “Ytterbium Fiber Laser System of DAW RF Gun for SuperKEKB”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD056, pp. 2648-2650.
[n] P. F. Meads, “On the Multiturn Injection of High-Power Beams into an Accumulator Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2767-2769.
[n] A. Noda et al., “Development of 11C+ Ion Source for Reacceleration With HIMAC for Real-Time Observation of Dose Distribution”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4686-4688. doi:10.18429/JACoW-IPAC2017-THPVA096
[n] L. R. Ives et al., “200 kW CW, 350 MHz Multiple Beam Inductive Output Tube”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO08, pp. 946-947.
[n] M. T. Crofford, S. W. Lee, J. A. Ball, T. L. Davidson, T. W. Hardek, and S. L. Jones, “Spallation Neutron Source High-Power Protection Module Test Stand”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP089, pp. 262-264.
[n] L. R. Sun et al., “2 K SUPERFLUID HELIUM CRYOGENIC VERTICAL TEST STAND OF PAPS”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1107-1110. doi:10.18429/JACoW-SRF2019-THP087
[n] D. E. Kim et al., “Undulator Commissioning Experience at PAL-XFEL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1520-1522. doi:10.18429/JACoW-IPAC2017-TUPAB087
[n] P. Ferguson, R. L. Ives, D. Marsden, and M. E. Read, “Development of a 10 kW CW, S-Band, PPM Focused Klystron”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP126, pp. 1068-1069.
[n] V. Rossi, “General Purpose Digital Signal Processing VME-Module for 1-Turn Delay Feedback Systems of the CERN Accelerator Chain”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP076, pp. 2186-2188.
[n] P. H. Baeta Neves Diniz Santos, “Status of the RFSoC-based Signal Processing for Multi-bunch and Filling Pattern Feedbacks in the SLS 2.0”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 297-300. doi:10.18429/JACoW-IBIC2023-TUP046
[n] R. Gholizadeh, C. Huang, T. C. Katsouleas, W. B. Mori, and P. Muggli, “Preservation of Ultra Low Emittances in Future High Energy Plasma Wakefield-Based Colliders”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP024, pp. 4585-4585.
[n] D. Fugate, G. Chiozzi, A. Caproni, B. Jeram, H. Sommer, and S. Harrington, “A generic software interface simulator for ALMA common software”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O3_017.
[n] B. Wang, Y. Wang, Y. Wei, C. H. Yu, and Y. Zhang, “A Correction Scheme for the Magnet Imperfection on the CEPC Collider Ring”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1346-1348. doi:10.18429/JACoW-IPAC2021-TUPAB007
[n] F. Loehl and P. Szypryt, “Active Beam Current Stabilization in the Cornell ERL Prototype Injector”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO018, pp. 523-525.
For LaTeX
Use Complete Form
For BibTeX
References
- C.-C. Kuo et al., “Impedance Study with Single Bunch Beam at Taiwan Photon Source”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 630-633.
- G. Y. Kong and W. Zhou, “The Backward Mode in an Electromagnetically Pumped Free Electron Laser”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1211-1214.
- G. Ryckewaert, “STATUS OF THE CYCLONE FACILITY”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 20C4, pp. XX-XX.
- P. N. Chirkov and Yu. I. Kirochkin, “THE GEODESIC NETWORK CONSTRUCTION IN U-70 SYNCHROTRON BY EQUALIZATION VIA THE CORRELATES METHOD”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THBP10, pp. XX-XX.
- G. Thomas, K. Azarov, R. Barill?¿re, S. Cabaret, N. Kulman, and J. Rochez, “LHC GCS A framework for the production of 23 homogeneous control systems”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_042.
- J. Li et al., “CSNS Linac RF System Design and R&D Progress”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper THP046, pp. 863-865.
- M. E. Read, G. Collins, P. Ferguson, L. R. Ives, R. H. Jackson, and D. Marsden, “10 MW, L-Band, Annular Beam Klystron for Accelerator Applications”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO09, pp. 948-950.
- C. Narug et al., “Successful cleanroom installation of PIP-II SSR2 coupler using robotic arm”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 168-170.
- R. D?Âlling and M. Rohrer, “A 4D Emittance Measurement Device for the 870 keV HIPA Injection Line”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 329-333.
- S. Kersten et al., “Control, Safety and Diagnostics for Future ATLAS Pixel Detectors”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC050, pp. 679-682.
- F. Lin, Y. S. Derbenev, A. Hutton, V. S. Morozov, F. C. Pilat, and Y. Zhang, “Towards a Small Emittance Design of the JLEIC Electron Collider Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2457-2459.
- D. E. Kim et al., “Development of PAL-XFEL Undulator System”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4044-4046.
- M. P. Howell et al., “The First ASME Code Stamped Cryomodule at SNS”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC106, pp. 2465-2467.
- J. L. Lamaack et al., “New Beam Position Monitor System for PETRA IV”, presented at the 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP021, unpublished.
- Y. L. Zhao et al., “Dynamic Comparison With XAL and Tracewin Based on the Injector-I of China ADS Test Stand”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3572-3574.
- T. Lamy, J. Angot, C. Fourel, and T. Thuillier, “New Configuration and Results with the LPSC Charge Breeder”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper WECO-A01, pp. 180-182.
- Y. Jongen and G. Ryckewaert, “Preliminary Design for a 30 MeV, 500 muA H- Cyclotron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2703-2706.
- D. Saez de Jauregui et al., “Characterization of Vacuum Chamber Samples for Superconducting Insertion Devices”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP070, pp. 723-725.
- M. Loiselet, N. Postiau, and G. Ryckewaert, “Status Report of Cyclone”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper I-16, pp. 82-85.
- Y. Jongen and G. Ryckewaert, “Status Report of Cyclone”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper A-10, pp. 80-83.
- M. T. Crofford, S. W. Lee, J. A. Ball, T. L. Davidson, T. W. Hardek, and M. F. Piller, “Spallation Neutron Source LLRF Temperature Dependence and Solution”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper MOP088, pp. 259-261.
- F. Yan, H. Geng, C. Meng, H. F. Ouyang, S. Pei, and Y. L. Zhao, “ADS Injector I Frequency Choice at IHEP”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 265-268.
- X. Gao, A. Shi, Z. Yin, and J. Zhong, “A Novel Monostructure Buncher for HIRFL”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F7-07, pp. 401-403.
- K. Jimbo, Z. Q. He, M. Nakao, A. Noda, H. Souda, and H. Tongu, “Analysis of Frequency Spectrum of Bunched Beam Related to Transverse Laser Cooling”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD011, pp. 391-393.
- M. C. L. Buzio et al., “Development of Upgraded Magnetic Instrumentation for CERN's Real-time Reference Field Measurement Systems”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB016, pp. 310-312.
- F. Hinode et al., “Design of a 1.5 GeV Storage Ring for the Integrated Photon Source Project at Tohoku University”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP14015, pp. XX-XX.
- S. Karabekyan, S. Abeghyan, J. Pflueger, and M. Yakopov, “Experience Gained during the Commissioning of the Undulator Control System at the European XFEL”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 148-150.
- X. Zhou, T. Natsui, Y. Ogawa, and M. Yoshida, “Ytterbium Fiber Laser System of DAW RF Gun for SuperKEKB”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD056, pp. 2648-2650.
- P. F. Meads, “On the Multiturn Injection of High-Power Beams into an Accumulator Ring”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2767-2769.
- A. Noda et al., “Development of 11C+ Ion Source for Reacceleration With HIMAC for Real-Time Observation of Dose Distribution”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4686-4688.
- L. R. Ives et al., “200 kW CW, 350 MHz Multiple Beam Inductive Output Tube”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO08, pp. 946-947.
- M. T. Crofford, S. W. Lee, J. A. Ball, T. L. Davidson, T. W. Hardek, and S. L. Jones, “Spallation Neutron Source High-Power Protection Module Test Stand”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper MOP089, pp. 262-264.
- L. R. Sun et al., “2 K SUPERFLUID HELIUM CRYOGENIC VERTICAL TEST STAND OF PAPS”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1107-1110.
- D. E. Kim et al., “Undulator Commissioning Experience at PAL-XFEL”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1520-1522.
- P. Ferguson, R. L. Ives, D. Marsden, and M. E. Read, “Development of a 10 kW CW, S-Band, PPM Focused Klystron”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP126, pp. 1068-1069.
- V. Rossi, “General Purpose Digital Signal Processing VME-Module for 1-Turn Delay Feedback Systems of the CERN Accelerator Chain”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP076, pp. 2186-2188.
- P. H. Baeta Neves Diniz Santos, “Status of the RFSoC-based Signal Processing for Multi-bunch and Filling Pattern Feedbacks in the SLS 2.0”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper TUP046, pp. 297-300.
- R. Gholizadeh, C. Huang, T. C. Katsouleas, W. B. Mori, and P. Muggli, “Preservation of Ultra Low Emittances in Future High Energy Plasma Wakefield-Based Colliders”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5RFP024, pp. 4585-4585.
- D. Fugate, G. Chiozzi, A. Caproni, B. Jeram, H. Sommer, and S. Harrington, “A generic software interface simulator for ALMA common software”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O3_017.
- B. Wang, Y. Wang, Y. Wei, C. H. Yu, and Y. Zhang, “A Correction Scheme for the Magnet Imperfection on the CEPC Collider Ring”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1346-1348.
- F. Loehl and P. Szypryt, “Active Beam Current Stabilization in the Cornell ERL Prototype Injector”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPO018, pp. 523-525.
Back to search