Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. B. Shwartz et al., “VEPP-2000 Collider Operation in Full Energy Range with New Injector”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 7-11. doi:10.18429/JACoW-RUPAC2018-MOXMH02
[n] C. J. Liaw, Y. Y. Lee, J. Alessi, and J. Tuozzolo, “Calculation of the Maximum Temperature on the Carbon Stripping Foil of the Spallation Neutron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP143, pp. 3300-3302.
[n] G. Gaitan et al., “Initial results for CVD based growth of Nb₃Sn”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 98-102. doi:10.18429/JACoW-SRF2025-MOP20
[n] J. A. Nolen, “Invited Paper: The Use of Superconducting Magnets in Spectrographs and Beam Transport Systems”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper D02, pp. 215-221.
[n] D. Raparia, J. Alessi, Y. Y. Lee, and W. T. Weng, “The SNS Ring to Target Beam Transport Line”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA94, pp. 1297-1299.
[n] G. Gaitan et al., “Commissioning of chemical vapor deposition system for superconducting thin films”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 102-106. doi:10.18429/JACoW-SRF2025-MOP21
[n] J. E. Spencer et al., “Beam Dynamics Measurements for the SLAC Laser Acceleration Experiment”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS055, pp. 3115-3117.
[n] T. Shintake, “Overview of Single Pass FEL Designs Technical Suggestions for Stability Improvement”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOBIS01, pp. XX-XX.
[n] M. S. H. Hutson and G. Edwards, “Advances in the Physical Understanding of Laser Surgery at 6.45 microns”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper FRAIS01, pp. XX-XX.
[n] E. Chyhyrynets et al., “Vibro-tumbling as an Alternative to Standard Mechanical Polishing Techniques for SRF Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 464-466. doi:10.18429/JACoW-SRF2019-TUP026
[n] Y. Li, S. Y. Chen, C. Han, and P. Liu, “Research on Module Design and Network Management of Accelerator Power Supply System”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1291-1293. doi:10.18429/JACoW-IPAC2019-TUPMP024
[n] M. Valette et al., “Impact of Superconducting Magnet Protection Equipment on the Circulating Beam in HL-LHC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3115-3118. doi:10.18429/JACoW-IPAC2018-THPAF062
[n] D. Raparia, J. Alessi, Y. Y. Lee, and W. T. Weng, “The NSNS High Energy Beam Transport Line”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P003, pp. 162-164.
For LaTeX
Use Complete Form
For BibTeX
References
- D. B. Shwartz et al., “VEPP-2000 Collider Operation in Full Energy Range with New Injector”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 7-11.
- C. J. Liaw, Y. Y. Lee, J. Alessi, and J. Tuozzolo, “Calculation of the Maximum Temperature on the Carbon Stripping Foil of the Spallation Neutron Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP143, pp. 3300-3302.
- G. Gaitan et al., “Initial results for CVD based growth of Nb₃Sn”, in Proc. 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, pp. 98-102.
- J. A. Nolen, “Invited Paper: The Use of Superconducting Magnets in Spectrographs and Beam Transport Systems”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper D02, pp. 215-221.
- D. Raparia, J. Alessi, Y. Y. Lee, and W. T. Weng, “The SNS Ring to Target Beam Transport Line”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA94, pp. 1297-1299.
- G. Gaitan et al., “Commissioning of chemical vapor deposition system for superconducting thin films”, in Proc. 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, pp. 102-106.
- J. E. Spencer et al., “Beam Dynamics Measurements for the SLAC Laser Acceleration Experiment”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS055, pp. 3115-3117.
- T. Shintake, “Overview of Single Pass FEL Designs Technical Suggestions for Stability Improvement”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper MOBIS01, pp. XX-XX.
- M. S. H. Hutson and G. Edwards, “Advances in the Physical Understanding of Laser Surgery at 6.45 microns”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper FRAIS01, pp. XX-XX.
- E. Chyhyrynets et al., “Vibro-tumbling as an Alternative to Standard Mechanical Polishing Techniques for SRF Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 464-466.
- Y. Li, S. Y. Chen, C. Han, and P. Liu, “Research on Module Design and Network Management of Accelerator Power Supply System”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1291-1293.
- M. Valette et al., “Impact of Superconducting Magnet Protection Equipment on the Circulating Beam in HL-LHC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3115-3118.
- D. Raparia, J. Alessi, Y. Y. Lee, and W. T. Weng, “The NSNS High Energy Beam Transport Line”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P003, pp. 162-164.
Back to search