JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	O. R. Bagnato, L. Jahnel, A. C. Lira, and P. Tavares, “An Electron Gun for the LNLS Pre-Injector”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 685-688. 
[n]	D. Hunt and G. Stover, “The Bevatron Liquid Nitrogen Circulation System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1622-1625. 
[n]	N. R. Stevenson et al., “A Remotely Controlled Robotic Vehicle for Work Within Radioactive Environments”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IV-12, pp. 198-201. 
[n]	S. Reimann, “Online Optimization of the Transfer Line from UNILAC towards SIS18 at GSI Using a Genetic Autotune Algorithm”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 922-924. doi:10.18429/JACoW-IPAC2022-TUPOST031
[n]	H. Santos et al., “Control and Analysis Software Development at the European XFEL”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 157. doi:10.18429/JACoW-ICALEPCS2019-MOMPR004
[n]	H. D. de Almeida, D. P. Magalhaes, M. A. L. Moraes, and J. M. Polli, “The Back-End Computer System for the Medipix Based PI-MEGA X-Ray Camera”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1149-1151. doi:10.18429/JACoW-ICALEPCS2017-THBPA03
[n]	J. Lesrel, S. Bousson, T. Junquera, A. Caruette, and M. Fouaidy, “Study of Thermal Effects in SRF Cavities”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97B12, pp. 374-384. 
[n]	G. Loisch, V. Belokurov, and F. Obier, “Few-Nanosecond Stripline Kickers for Top-Up Injection into PETRA IV”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2858-2861. doi:10.18429/JACoW-IPAC2022-THPOTK040
[n]	M. Koujili et al., “Test Measurements of a 20 m/s Carbon Wire Beam Scanner”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD64, pp. 452-454. 
[n]	T. Hodgetts et al., “Strongly tapered helical undulator system for FAST-GREENS installation”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1240-1242. doi:10.18429/JACoW-IPAC2023-MOPM112
[n]	P. Martel, Ch. Delamare, S. Mallon Amerigo, L. Pater, S. Petit, and D. Widegren, “Maximizing the Efficiency of LHC Maintenance during Operation Times using a Mobile Tool”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB072, pp. 4035-4037. 
[n]	A. Balling, A. Dieckmann, F. Frommberger, and W. Hillert, “Precision Closed Orbit Correction in a Fast Ramping Stretcher Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP010, pp. 3714-3716. 
[n]	M. Dole, S. Grau, and D. Raffourt, “Concept of a Fire and Gas Safety System for Accelerators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2729-2732. doi:10.18429/JACoW-IPAC2016-WEPOR029
[n]	D. K. Olsson, ?à. Andersson, and M. Sj?Âstr?Âm, “Trials of Beam-Based Sextupole Calibration through 2nd Order Dispersion”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1551-1553. doi:10.18429/JACoW-IPAC2019-TUPGW064
[n]	T. Kikuchi, N. Harada, T. Sasaki, H. Tamukai, and T. Katayama, “Beam Dynamics Simulation on Simultaneous use of Stochastic Cooling and Electron Cooling with Internal Target”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS004, pp. 3433-3435. 
[n]	A. J. Nelson et al., “Achieving Microfocus of the 13.5-nm FLASH Beam for Exploring Matter Under Extreme Conditions”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper FROB01, pp. 784-788. 
[n]	D. Lacarr?¿re et al., “An Instrument for Internal Surface Analysis of LEP 200 Superconducting Radiofrequency Cavities”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I18, pp. XX-XX. 
[n]	Y. Wang et al., “Understanding the beam quality requirement for high energy electron microscopy”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2609-2612. doi:10.18429/JACoW-IPAC2023-WEODB3
[n]	M. Brunken et al., “Latest Developments from the S-DALINAC and its Free-Electron-Laser”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4007, pp. 403-405. 
[n]	G. Y. Hsiung, J. R. Chen, S. N. Hsu, C. S. Hwang, and K. C. Kuan, “Vacuum Commissioning for the SWLS Absorber Inside a Kicker-Chamber at TLS Storage Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPE035, pp. 821-823. 
[n]	V. Parma et al., “The Assembly of the LHC Short Straight Sections (SSS) at CERN: Project Status and Lessons Learned”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT045, pp. 2890-2892. 
[n]	H. Braun, A. V. Kulikov, R. Pitthan, and M. Woodley, “Nonlinear Effects in the SLC e Transport Line”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1845-1848. 
[n]	A. Shemyakin et al., “Fermilab Electron Cooling Project: Field Measurements in the Cooling Section Solenoid”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOAB006, pp. 195-197. 
[n]	H. Ghasem, E. Ahmadi, and D. Einfeld, “Booster Design for ILSF”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC025, pp. 2960-2962. 
[n]	Y. Abe, K. Kubo, N. Terunuma, and T. Okugi, “Evaluation of wakefield mitigation for upgrading the ATF final focus beamline”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper TUPB103, unpublished. 
[n]	G. Andonian et al., “Gas sheet ionization based monitor for electron beams”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPG93, unpublished. 
[n]	S. F. Mikhailov, S. M. Hartman, J. Li, V. Popov, and Y. K. Wu, “Challenges for the Energy Ramping in a Compact Booster Synchrotron”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS015, pp. 1212-1214. 
[n]	C. Fortgang et al., “Longitudinal Beam Dynamics of a 5 MeV DTL - A Comparison of Theory and Experiment”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-48, pp. 167-169. 
[n]	O. Bruning et al., “Electron Cloud and Beam Scrubbing in the LHC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA6, pp. 2629-2631. 
[n]	T. Katayama et al., “Bunched Beam Stochastic Cooling at COSY”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD064, pp. 834-836. 
[n]	Y.-T. Li et al., “Design and Implementation of a Power Monitoring and Distribution System for the SSPA-Based RF Transmitter at NSRRC”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB022, unpublished. 
[n]	S. Casalbuoni, S. Schleede, M. Hagelstein, D. Saez de Jauregui, and P. Tavares, “Can Electron Multipacting Explain the Pressure Rise in the Cold Bore ANKA Superconducting Undulator?”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper OPR03, pp. 12-20. 
[n]	T. Mimashi et al., “SuperKEKB Beam abort System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 116-118. doi:10.18429/JACoW-IPAC2014-MOPRO023
[n]	Y. Hashimoto et al., “A Gas Sheet Beam Profile Monitor for the HIMAC Synchrotron”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI113, pp. 1900-1902. 
[n]	S. F. Mikhailov et al., “Project of Booster Synchrotron for Duke FEL Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH124, pp. 3525-3527. 
[n]	G. Carron et al., “Observation of Transverse Quadrupole Mode Instabilities in Intense Cooled Antiproton Beams in the AA”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 803-806. 
[n]	A. S. Sharma, S. Acharya, U. Kumar, G. R. Nagabhushana, and K. V. Nagesh, “Characterisation of Amorphous Magnetic Material with Multiple Pulse Excitation”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA070, pp. 732-734. 
[n]	G.-Y. Hsiung, C. K. Chan, C.-H. Chang, J.-R. Chen, H. P. Hsueh, and T. L. Yang, “Design Concept of the Vacuum System for the 3 GeV Taiwan Photon Source”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS064, pp. 3433-3435. 
[n]	F.-J. Decker et al., “Four X-ray Pulses within 10 ns at LCLS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1859-1862. doi:10.18429/JACoW-IPAC2019-TUPRB086
[n]	J. J. Sebek et al., “Frequent Fill Top-Off Injection at SPEAR3”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP217, pp. 2531-2533. 
[n]	S. R. Marques et al., “Design of Button Beam Position Monitor for the Brazilian Synchrotron Light Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN005, pp. 3871-3873. 
[n]	C. Hauviller, P. M. Ivanov, A. Poncet, Ph. Sacr?®, and Ph. Trilhe, “The Electrical Distribution Feed Box for the LHC Prototype Cell”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A06, pp. 2217-2219. 
[n]	C. J. Wang, J. Chen, C. K. Chang, Ch. E. Wang, and K. T. Hsu, “Control System for the Superconducting RF System of NSRRC”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP574, pp. XX-XX. 
[n]	A. Chabert, G. Gendreau, and P. Lapostolle, “Invited Paper: Limited Energy Spread in an SSC”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-02, pp. 2306-2311. 
[n]	Z. Izaola et al., “Design of the Bilbao Accelerator Low Energy Extraction Lines”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP010, pp. 1519-1521. 
[n]	M. Hostettler, K. Fuchsberger, and G. Papotti, “Operational Experience with Luminosity Scans for Beam Size Estimation in 2016 LHC Proton Physics Operation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 374-376. doi:10.18429/JACoW-IPAC2017-MOPAB109
[n]	N. Burger, Y.-C. Chen, C. Hall, T. Hodgetts, and J. Xu, “Force-neutral adjustable phase undulators”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS096, unpublished. 
[n]	H. Guler et al., “Power Coupler Design for the LUCRECE Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3732-3735. doi:10.18429/JACoW-IPAC2018-THPAL041
[n]	G. Gammel et al., “First Results on the BNL H MEQALAC”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper C01, pp. 89-91. 
[n]	C. E. Clayton et al., “Evolution of Relativistic Plasma Wave-Front in LWFA”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEOBKI02, pp. 1919-1921. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search