Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Morales Sanchez et al., “Smartcell X-band normal conducting accelerator structure prototype fabrication”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 666-669. doi:10.18429/JACoW-LINAC2024-THPB016
[n] B. Bradu, K. Brodzinski, G. Ferlin, and V. Gahier, “LHC low beta quadrupole magnets: cryogenic refrigeration capacity and improved controls for luminosity optimization”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3791-3793. doi:10.18429/JACoW-IPAC2023-WEPM094
[n] N. V. Lazarev and S. Skachkov, “Tipless Permanent Magnet Quadrupole Lenses”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S7-2, pp. 380-383.
[n] G. Vandoni et al., “An SRF Test Stand in High Intensity and High Energy Proton Beams”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1187-1191. doi:10.18429/JACoW-SRF2019-THP106
[n] C. Zannini et al., “Beam-induced heating mitigation of the SPS kickers: a crucial upgrade to move towards HL-LHC beam intensities”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3486-3489. doi:10.18429/JACoW-IPAC2023-WEPL157
[n] I. M. Kapchinskij and N. V. Lazarev, “Invited Paper-The Linear Accelerator Structures with Space-Uniform Quadrupole Focusing”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3462-3469.
[n] D. Howard et al., “Bevalac Injector Final Stage RF Amplifier Upgrades”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 742-745.
[n] A. D. Palczewski, F. Marhauser, A. Grassellino, and S. Posen, “Material Qualification of LCLS-II Production Niobium Material Including RF and Flux Expulsion Measurements on Single Cell Cavities”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 199-202. doi:10.18429/JACoW-LINAC2016-MOPLR026
[n] S. A. Kondrashev, J.-W. Kim, Y. H. Park, and H. J. Son, “Advanced EBIS Charge Breeder for Rare Isotope Science Project”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1304-1307. doi:10.18429/JACoW-IPAC2016-TUPMR029
[n] A. Navitski, A. Prudnikava, and Y. Tamashevich, “Progress of R&D on SRF Cavities at DESY towards the ILC Performance Goal”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2499-2501. doi:10.18429/JACoW-IPAC2014-WEPRI011
[n] G. V. Eremeev, K. Macha, U. Pudasaini, C. E. Reece, and A-M. Valente-Feliciano, “Progress Towards Nb3Sn CEBAF Injector Cryomodule”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 193-195. doi:10.18429/JACoW-LINAC2016-MOPLR024
[n] O. O. Andreassen and A. Tarasenko, “Continuous Integration Using LabVIEW, SVN and Hudson”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOMIB08, pp. 74-76.
[n] K. Endo, K. Egawa, Z. Fang, M. Mizobata, and A. Teramoto, “Development of High Field Dipole and High Current Pulse Power Supply for Compact Proton Synchrotron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG027, pp. 1071-1073.
[n] M. Garlasch?® et al., “Assembly of the DQW Crab Cavity Cryomodule for SPS Test”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2561-2564. doi:10.18429/JACoW-IPAC2018-WEPMF078
[n] T. Hays et al., “Microscopic Examination and Elemental Analysis of Field Emission Sites in 5.8 GHz Superconducting Mushroom Cavities”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I23, pp. XX-XX.
[n] T. J. Jones et al., “Development of a Novel Supporting System for High Luminosity LHC SRF Crab Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 304-308. doi:10.18429/JACoW-SRF2017-MOPB104
[n] B. Frias, J. Alonso, R. Dwinell, and F. Lothrop, “Control of the Bevatron/Bevalac Main Guide Field Power Supply for Fast Ion Switching Operation”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1896-1899.
[n] A. Biocca et al., “The Advanced Light Source Accelerator Control System at Ten Years From Commissioning”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP008, pp. XX-XX.
[n] K. Brodzinski, B. Bradu, S. D. Claudet, D. Delikaris, L. P. Delprat, and G. Ferlin, “Adaptation of the Cryogenic System Capacity for the LHC Dynamic Heat Load - Operational Experience”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2541-2544. doi:10.18429/JACoW-IPAC2018-WEPMF073
[n] A. Seryi et al., “ATF2 Commissioning”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR1RAI03, pp. 4205-4209.
[n] B. Mustapha, P. N. Ostroumov, and A. Perry, “Progress and Design Studies for the ATLAS Multi-User Upgrade”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 610-612. doi:10.18429/JACoW-LINAC2016-TUPLR068
[n] J. Holma, M. J. Barnes, and L. Ducimeti?¿re, “Measurements on Magnetic Cores for Inductive Adders with Ultra-Flat Output Pulses for CLIC DR Kickers”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3619-3622. doi:10.18429/JACoW-IPAC2016-THPMW032
[n] L. Bellan et al., “Source and LEBT Beam Preparation for IFMIF-EVEDA RFQ”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 420-423. doi:10.18429/JACoW-LINAC2016-TUPRC005
[n] B. C. Isherwood, G. Machicoane, G. Pozdeyev, and Y. Yamazaki, “Beam Instabilities in Electron Cyclotron Resonance Ion Sources”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 455-457. doi:10.18429/JACoW-LINAC2016-TUPRC019
[n] V. V. Bukhal, A. A. Patapenka, A. A. Safronava, M. Artiushenko, K. V. Husak, and S. I. Tyutyunnikov, “Experimental Determination of Heavy Nuclei Fission Cross-sections under Relativistic Deuterons Irradiation on the Accelerator Complex ``Nuclotron'' for Purposes of Transmutation and Energy Amplification”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2221-2223. doi:10.18429/JACoW-IPAC2014-WEPRO109
[n] A. N. Ermakov, V. I. Shvedunov, and V. S. Skachkov, “A Fixed Gradient Rare Earth Permanent Alpha-Magnet”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3B18, pp. 2125-2127.
[n] A. M. Kozodaev et al., “Development and Construction of Experimental ADS at ITEP”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI110, pp. 2777-2779.
[n] A. Gallo, D. Alesini, F. Marcellini, P. Raimondi, and M. Zobov, “Preliminary Study of a Crab Crossing System for DAFNE”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS029, pp. 607-609.
[n] L. Groening et al., “Upgrade of the Universal Linear Accelerator UNILAC for FAIR”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 880-882. doi:10.18429/JACoW-IPAC2016-MOPOY017
[n] I. A. Kvashonkin, I. S. Libman, I. I. Sulygin, and I. G. Umanskij, “RF Power Amplifier for the First Stage of the UNK”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1200-1204.
[n] P. B. Cheblakov et al., “NSLS-II Booster Ramp Handling”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC053, pp. 1189-1192.
[n] T. Endo et al., “Fast Betatron Tune Controller for Circulating Beam in a Synchrotron”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D032, pp. 468-470.
[n] P. V. Tyagi et al., “Surface Studies of Plasma Processed Nb Samples”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB115, pp. 438-442.
[n] A. Monera Martinez, R. Andersson, A. Nordt, M. Zaera-Sanz, and C. Hilbes, “Overview and Design Status of the Fast Beam Interlock System at ESS”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 409-412. doi:10.18429/JACoW-ICALEPCS2015-MOPGF138
[n] D. Alesini, A. Gallo, A. Ghigo, F. Marcellini, M. Serio, and M. Zobov, “HOM Damping in the DAFNE Injection Kickers”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B06, pp. 1145-1147.
[n] V. Gubin, A. M. Barnyakov, S. L. Samoylov, and D. P. Sukhanov, “RF Cavity Based Charge Detector for a Low Charge Ultra Sort Singe Electron Bunch Measurement”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 423-425. doi:10.18429/JACoW-RuPAC2021-WEPSC42
[n] G. M. Wang et al., “NSLS II Commissioning Tools”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO17, pp. 276-278.
[n] V. K. Plotnikov, “Engineering Design of ITEP Proton Linac for Nuclear Waste Transmutation”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP80, pp. 252-254.
[n] S. Heo, T. Hashimoto, J. H. Lee, Y. H. Park, K. Yoo, and C. Lim, “Beam Study of RFQ Cooler Buncher for EBIS Charge Breeder at RAON”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper WE2WH03, unpublished.
[n] A. Navitski, S. Lagotzky, G. Mueller, D. Reschke, and X. Singer, “Surface Roughness and Correlated Enhanced Field Emission Investigations of Electropolished Niobium Samples”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO045, pp. 316-320.
[n] J. Holma and M. J. Barnes, “Evaluation of Components for the High Precision Inductive Adder for the CLIC Damping Rings”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD076, pp. 3692-3694.
[n] A. A. Astapov, V. P. Bamblevski, and L. N. Zaitsev, “Induced Radioactivity of the Septum Magnet of the Beam Slow Extraction at the Nuclotron”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP052L, pp. 2624-2626.
[n] F. Bertinelli and R. Jung, “Design and Construction of LEP Collimators”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1564-1567.
[n] V. K. Vorobjev, E. V. Klimenkov, V. M. Mokhov, and E. S. Nelipovich, “A Second Radio-Frequency Harmonic in the U-70 Booster”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1020-1023.
[n] M. El Khaldi et al., “The RF System of Thomx”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 551-553. doi:10.18429/JACoW-LINAC2016-TUPLR040
[n] J. Holma and M. J. Barnes, “Preliminary Design of an Inductive Adder for CLIC Damping Rings”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO032, pp. 3409-3411.
[n] K. Endo et al., “Compact Proton and Carbon Ion Synchrotrons for Radiation Therapy”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI087, pp. 2733-2735.
[n] V. S. Skachkov, “A Variable Gradient Rare Earth Permanent Alpha-Magnet”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3B17, pp. 2122-2124.
[n] G. Stover, R. Dwinell, J. Halliwell, and M. Nyman, “Operational Results for the Raster Scanning Power Supply System Constructed at the Bevalac Biomedical Facility”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1890-1893.
[n] T. Miyajima, “Effect of Number of Macro Particles on Time Evolution of Phase Space Distribution”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 414-416. doi:10.18429/JACoW-LINAC2016-TUPRC003
[n] A. Gallo et al., “DAFNE Broadband Impedance”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI025, pp. 1494-1496.
[n] B. Mustapha et al., “Alternative Design for the RISP Pre-Stripper Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 531-534. doi:10.18429/JACoW-LINAC2016-TUPLR028
[n] E. A. Simonov, E. B. Levichev, and D. N. Shatilov, “Application of Frequency Map Analysis to Beam-Beam Effects Study in Crab Waist Collision Scheme”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE075, pp. 4692-4694.
[n] I. M. Kapchinskij, A. M. Kozodaev, N. V. Lazarev, and V. S. Skachkov, “Design and Development of Permanent Magnet Quadrupoles for Ion Linacs”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper F07, pp. 350-351.
[n] M. El Khaldi and W. Kaabi, “Experimental Study of Multipactor Suppression in Dielectric Materials”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2753-2756. doi:10.18429/JACoW-IPAC2015-WEPMA007
[n] D. L. Brown, X. Geng, S. W. Lee, M. Wezensky, and A. P. Zhukov, “New Controller for High Voltage Converter Modulator at Spallation Neutron Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3621-3623. doi:10.18429/JACoW-IPAC2017-WEPVA150
[n] J. Holma, M. J. Barnes, and S. J. Ovaska, “Modelling of Parasitic Inductances of a High Precision Inductive Adder for CLIC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA033, pp. 738-740.
[n] A. A. Derbenev et al., “Monitoring and Archiving of NSLS-II Booster Synchrotron Parameters”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC021, pp. 587-590.
[n] W. Leemans et al., “Laser Plasma Sources for High Brightness Beams: From THz to X-rays”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THOA001, pp. XX-XX.
[n] Yu. I. Maltseva and V. G. Prisekin, “Optical Fiber Based Beam Loss Monitor for the BINP e-e+ Injection Complex”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 486-488. doi:10.18429/JACoW-RUPAC2018-THPSC38
[n] D. Alesini, R. Corsini, A. Gallo, F. Marcellini, D. Schulte, and I. Syratchev, “Studies on the RF Deflectors for CTF3”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6B09, pp. 465-467.
[n] D. Howard, R. Dwinell, B. Feinberg, R. Fuhrman, and R. Sorensen, “Computer Aided Field Measurements of the SUPERHILAC Alvarez Cavities”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 112-115.
[n] J. Y. Huang, S. H. Kim, S. H. Nam, and S. S. Park, “Klystron-Modulator System Performance for PLS 2-GeV Electron Linac”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP2B19, pp. 2367-2369.
[n] S. Boychenko et al., “Towards a Second Generation Data Analysis Framework for LHC Transient Data Recording”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 802-805. doi:10.18429/JACoW-ICALEPCS2015-WEPGF046
[n] P. Michelato et al., “An X-Ray Fluorescence Probe for Defect Detection in Superconducting 1.3 GHz Cavities”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP110, pp. 736-738.
[n] H. Reymond, O. Ø. Andreassen, M. Charrondiere, C. Charrondière, and P. D. Jankowski, “Enhancing Measurement Quality in HL-LHC Magnets Testing Using Software Techniques on Digital Multimeter Cards-Based System”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 729-734. doi:10.18429/JACoW-ICALEPCS2023-TUPDP087
[n] J. Martinez-Darve, K. Artoos, P. Cruikshank, N. Kos, and C. Rathjen, “Measurement of the Mechanical Behaviour of the LHC Beam Screen During a Quench”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH035, pp. 2162-2164.
[n] D. Alesini et al., “Design Status of a High Harmonic RF System for DAFNE”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B15, pp. 1495-1497.
[n] J. Smedley et al., “QE Measurements of a Nb-Pb SRF Photoinjector”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 11, pp. 95-98.
[n] J. Y. Huang et al., “RHIC Injection Transport Beam Emittance Measurements”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPF04, pp. 45-48.
[n] M. F. Blinov et al., “High Power Neutron Converter for Low Energy Proton/Deuteron Beams: Liquid Metal Driving System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC085, pp. 256-258.
[n] D. Khan and T. O. Raubenheimer, “LCLS-II Bunch Compressor Study: 5-Bend Chicane”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP027, pp. 755-762.
[n] A. Navitski et al., “ILC-HiGrade Cavities as a Tool of Quality Control for European XFEL”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP043, pp. 212-215.
[n] J. M. Lee, J. Y. Huang, and C. Kim, “Inverse Response Matrix Computation for the Storage Ring Slow Orbit Feedback Control: Synthesized Topological Inversion Computation”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA34, pp. 431-433.
[n] A. M. Kozodaev, N. V. Lazarev, D. A. Liakin, A. M. Raskopin, and V. S. Skachkov, “Simulation of Proton Beam Behaviour in High Energy Linac with Few-Gaps Resonators at Failure of One or Some of Them”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B02, pp. 830-832.
[n] S. Ravat, L. Deront, A. Kehrli, and X. Pons, “A Safety System for Experimental Magnets Based on CompactRIO”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC053, pp. 210-213.
[n] D. A. Goldberg, G. R. Lambertson, L. Shalz, and F. Voelker, “Measurement of Frequency Response of LBL Stochastic Cooling Arrays for TeV-1 Storage Rings”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2168-2171.
[n] V. A. Koshelev et al., “Design of 4-vane RFQ with Magnetic Coupling Windows for Nuclotron Injector Lu-20”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 575-577. doi:10.18429/JACoW-LINAC2016-TUPLR050
[n] K. Artoos et al., “Status of the HL-LHC Crab Cavity Tuner”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 646-651. doi:10.18429/JACoW-SRF2019-TUP081
[n] N. Carmignani, W. De Nolf, A. Franchi, B. Nash, C. Sahle, and L. Torino, “Measurements of the Momentum Compaction Factor of the ESRF Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1392-1395. doi:10.18429/JACoW-IPAC2019-TUPGW006
[n] A. D. Palczewski, B. Bullock, C. A. Cooper, S. C. Joshi, A. Navitski, and A. A. Rossi, “R&D Progress in SRF Surface Preparation With Centrifugal Barrel Polishing (CBP) for both Nb and Cu”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUIOB01, pp. 398-403.
[n] J. Gutekunst, F. Klumb, G. Kautzmann, H. M. Durand, and M. Sosin, “Continuous position estimation for the full remote alignment system of the High Luminosity LHC upgrade”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3337-3340. doi:10.18429/JACoW-IPAC2024-THPG36
[n] M. Nagaenko and I. Pavletsov, “Simulation of Beam Optics and Beam-Degrader Interaction for COMBAS Fragment-Separator”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1394-1397.
[n] A. A. Asseev, A. P. Elin, A. V. Kalajdov, S. N. Lapitskij, and A. V. Minchenko, “Non Resonant Slow Extraction of Protons from the IHEP Accelerator to the SWD Setup”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1486-1488.
[n] F. Daly, S. Fisher, R. Kurita, and J. Brian Langton, “Mechanical Design of the HER Synchrotron Light Monitor Primary Mirror for the PEP-II B-Factory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P050, pp. 2014-2016.
[n] W. A. Barth et al., “First Heavy Ion Beam Acceleration with a Superconducting Multi Gap CH-cavity”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 215-219. doi:10.18429/JACoW-HB2018-WEP1WB03
[n] E. A. Levterova, A. A. Baldin, A. I. Berlev, I. A. Kryachko, M. Paraipan, and S. I. Tyutyunnikov, “TFBC Detectors Application for the Study of the Energy Spectrum of Neutrons Produced by Interaction of Uranium Target With the 1 - 8 GeV Incident Beams of Deutrons”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper MOPSA30, unpublished.
[n] V. S. Skachkov, I. M. Kapchinskiy, N. V. Lazarev, and A. V. Selin, “Circular Permanent Magnet Quadrupoles for Higher Frequency and Higher Shunt Impedance Linacs”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1400-1403.
[n] A. Navitski et al., “R&D on Cavity Treatments at DESY Towards the ILC Performance Goal”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP053, pp. 240-243.
[n] F. E. Emanov, D. Bolkhovityanov, A. R. Frolov, and Ye. A. Gusev, “Extending VEPP-5 Control System by Middleware for Injection/extraction Automation”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC25, pp. 371-373.
[n] I. V. Chuvilo et al., “Proton 36 MeV, 0.5 mA Linac ISTRA-36 as a Driver Multipurpose Irradiation Test Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP078G, pp. 2674-2678.
[n] J. Holma, M. J. Barnes, and C. Belver-Aguilar, “Measurements on Prototype Inductive Adders with Ultra-flat-top Output Pulses for CLIC DR Kickers”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 128-130. doi:10.18429/JACoW-IPAC2014-MOPRO028
[n] A. M. Kozodaev, N. V. Lazarev, D. A. Liakin, A. M. Raskopin, and V. S. Skachkov, “Reliability Increase Ways for High-Power Linacs - ADS Drivers”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B03, pp. 942-944.
[n] S. Boychenko, M. A. Galil?â, J. C. Garnier, M. Zerlauth, and M. Zenha-Rela, “Multi-Criteria Partitioning on Distributed File Systems for Efficient Accelerator Data Analysis and Performance Optimization”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1436-1441. doi:10.18429/JACoW-ICALEPCS2017-THPHA036
[n] A. Navitski, K. Fl?Âttmann, S. Lederer, and G. Mueller, “Novel UHV Scanning Anode Field Emission Microscope (SAFEM) for Dark Current Investigations on Photocathodes”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO044, pp. 312-315.
[n] J. D. Mammosser et al., “Results From the Proton Power Upgrade Project Cavity Quality Assurance Plan”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 801. doi:10.18429/JACoW-SRF2021-THPCAV008
[n] E. Minehara, P. Bilquist, W. Evans, F. Lynch, and R. Pardo, “Design of the ATLAS PIIECR Ion Source”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper M-06, pp. 725-727.
[n] K. Yoo, M. Chung, S. Heo, J. H. Lee, Y. H. Park, and C. Lim, “Offline Test of EBIS Charge Breeder for RAON Facility Using Cs1+ Ion Beam”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper FR4WH03, unpublished.
[n] R. Ghanbari et al., “Correlating Lambda Shift Measurements with RF Performance in Mid-T Heat Treated Cavities”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 124-128. doi:10.18429/JACoW-SRF2023-MOPMB021
[n] G. M. Wang et al., “NSLS II Injector Integrated Testing”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA063, pp. 3285-3287.
[n] S. W. Lee and Y. W. Kang, “RF and Thermo-Mechanical Considerations in Designing the Waveguide Iris Coupler for the Drift Tube Linac in the ORNL Spallation Neutron Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3796-3798. doi:10.18429/JACoW-IPAC2018-THPAL063
[n] T. Kramer et al., “Feasibility of kicker systems for FCC-ee and injectors”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 470-473. doi:10.18429/JACoW-IPAC2025-MOPM065
[n] H. Guler et al., “Power Coupler Design for the LUCRECE Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3732-3735. doi:10.18429/JACoW-IPAC2018-THPAL041
[n] V. Gubin, O. Alyakrinsky, S. P. Bardakhanov, and M. Golkovsky, “About Carbides-made Nanoceramics Fission Target for RIB Production”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC089, pp. 268-270.
[n] D. Woog, M. J. Barnes, L. Ducimeti?â, J. Holma, and T. Kramer, “Design of an Inductive Adder for the FCC Injection Kicker Pulse Generator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3312-3315. doi:10.18429/JACoW-IPAC2017-WEPVA024
[n] G. Felcsuti and J. B. González Fernández, “Structural Dynamic Testing and Design Evaluation of the Formax Detector Gantry”, presented at the MEDSI'23, Beijing, China, Nov. 2023, paper THOBM01, unpublished.
[n] I. Sakai et al., “Opposite Field Septum Magnet System for the J-PARC 50GeV Ring Injection”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT079, pp. 1339-1341.
[n] G. Zschornack et al., “A New Ion Beam Beam Facility for Slow Highly Charged Ions”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT023, pp. 1189-1191.
[n] B. Henrist, P. Costa Pinto, S. Fiotakis, M. Himmerlich, and C. Kouzios, “Large scale production of amorphous carbon coatings for the new beam screens of the HL-LHC project”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7175, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- P. Morales Sanchez et al., “Smartcell X-band normal conducting accelerator structure prototype fabrication”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 666-669.
- B. Bradu, K. Brodzinski, G. Ferlin, and V. Gahier, “LHC low beta quadrupole magnets: cryogenic refrigeration capacity and improved controls for luminosity optimization”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM094, pp. 3791-3793.
- N. V. Lazarev and S. Skachkov, “Tipless Permanent Magnet Quadrupole Lenses”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S7-2, pp. 380-383.
- G. Vandoni et al., “An SRF Test Stand in High Intensity and High Energy Proton Beams”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1187-1191.
- C. Zannini et al., “Beam-induced heating mitigation of the SPS kickers: a crucial upgrade to move towards HL-LHC beam intensities”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL157, pp. 3486-3489.
- I. M. Kapchinskij and N. V. Lazarev, “Invited Paper-The Linear Accelerator Structures with Space-Uniform Quadrupole Focusing”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3462-3469.
- D. Howard et al., “Bevalac Injector Final Stage RF Amplifier Upgrades”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 742-745.
- A. D. Palczewski, F. Marhauser, A. Grassellino, and S. Posen, “Material Qualification of LCLS-II Production Niobium Material Including RF and Flux Expulsion Measurements on Single Cell Cavities”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 199-202.
- S. A. Kondrashev, J.-W. Kim, Y. H. Park, and H. J. Son, “Advanced EBIS Charge Breeder for Rare Isotope Science Project”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1304-1307.
- A. Navitski, A. Prudnikava, and Y. Tamashevich, “Progress of R&D on SRF Cavities at DESY towards the ILC Performance Goal”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2499-2501.
- G. V. Eremeev, K. Macha, U. Pudasaini, C. E. Reece, and A-M. Valente-Feliciano, “Progress Towards Nb3Sn CEBAF Injector Cryomodule”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 193-195.
- O. O. Andreassen and A. Tarasenko, “Continuous Integration Using LabVIEW, SVN and Hudson”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOMIB08, pp. 74-76.
- K. Endo, K. Egawa, Z. Fang, M. Mizobata, and A. Teramoto, “Development of High Field Dipole and High Current Pulse Power Supply for Compact Proton Synchrotron”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPG027, pp. 1071-1073.
- M. Garlasch?® et al., “Assembly of the DQW Crab Cavity Cryomodule for SPS Test”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2561-2564.
- T. Hays et al., “Microscopic Examination and Elemental Analysis of Field Emission Sites in 5.8 GHz Superconducting Mushroom Cavities”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I23, pp. XX-XX.
- T. J. Jones et al., “Development of a Novel Supporting System for High Luminosity LHC SRF Crab Cavities”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 304-308.
- B. Frias, J. Alonso, R. Dwinell, and F. Lothrop, “Control of the Bevatron/Bevalac Main Guide Field Power Supply for Fast Ion Switching Operation”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1896-1899.
- A. Biocca et al., “The Advanced Light Source Accelerator Control System at Ten Years From Commissioning”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP008, pp. XX-XX.
- K. Brodzinski, B. Bradu, S. D. Claudet, D. Delikaris, L. P. Delprat, and G. Ferlin, “Adaptation of the Cryogenic System Capacity for the LHC Dynamic Heat Load - Operational Experience”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2541-2544.
- A. Seryi et al., “ATF2 Commissioning”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR1RAI03, pp. 4205-4209.
- B. Mustapha, P. N. Ostroumov, and A. Perry, “Progress and Design Studies for the ATLAS Multi-User Upgrade”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 610-612.
- J. Holma, M. J. Barnes, and L. Ducimeti?¿re, “Measurements on Magnetic Cores for Inductive Adders with Ultra-Flat Output Pulses for CLIC DR Kickers”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3619-3622.
- L. Bellan et al., “Source and LEBT Beam Preparation for IFMIF-EVEDA RFQ”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 420-423.
- B. C. Isherwood, G. Machicoane, G. Pozdeyev, and Y. Yamazaki, “Beam Instabilities in Electron Cyclotron Resonance Ion Sources”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 455-457.
- V. V. Bukhal, A. A. Patapenka, A. A. Safronava, M. Artiushenko, K. V. Husak, and S. I. Tyutyunnikov, “Experimental Determination of Heavy Nuclei Fission Cross-sections under Relativistic Deuterons Irradiation on the Accelerator Complex ``Nuclotron'' for Purposes of Transmutation and Energy Amplification”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2221-2223.
- A. N. Ermakov, V. I. Shvedunov, and V. S. Skachkov, “A Fixed Gradient Rare Earth Permanent Alpha-Magnet”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP3B18, pp. 2125-2127.
- A. M. Kozodaev et al., “Development and Construction of Experimental ADS at ITEP”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI110, pp. 2777-2779.
- A. Gallo, D. Alesini, F. Marcellini, P. Raimondi, and M. Zobov, “Preliminary Study of a Crab Crossing System for DAFNE”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS029, pp. 607-609.
- L. Groening et al., “Upgrade of the Universal Linear Accelerator UNILAC for FAIR”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 880-882.
- I. A. Kvashonkin, I. S. Libman, I. I. Sulygin, and I. G. Umanskij, “RF Power Amplifier for the First Stage of the UNK”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1200-1204.
- P. B. Cheblakov et al., “NSLS-II Booster Ramp Handling”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC053, pp. 1189-1192.
- T. Endo et al., “Fast Betatron Tune Controller for Circulating Beam in a Synchrotron”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D032, pp. 468-470.
- P. V. Tyagi et al., “Surface Studies of Plasma Processed Nb Samples”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB115, pp. 438-442.
- A. Monera Martinez, R. Andersson, A. Nordt, M. Zaera-Sanz, and C. Hilbes, “Overview and Design Status of the Fast Beam Interlock System at ESS”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 409-412.
- D. Alesini, A. Gallo, A. Ghigo, F. Marcellini, M. Serio, and M. Zobov, “HOM Damping in the DAFNE Injection Kickers”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5B06, pp. 1145-1147.
- V. Gubin, A. M. Barnyakov, S. L. Samoylov, and D. P. Sukhanov, “RF Cavity Based Charge Detector for a Low Charge Ultra Sort Singe Electron Bunch Measurement”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 423-425.
- G. M. Wang et al., “NSLS II Commissioning Tools”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPHO17, pp. 276-278.
- V. K. Plotnikov, “Engineering Design of ITEP Proton Linac for Nuclear Waste Transmutation”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP80, pp. 252-254.
- S. Heo, T. Hashimoto, J. H. Lee, Y. H. Park, K. Yoo, and C. Lim, “Beam Study of RFQ Cooler Buncher for EBIS Charge Breeder at RAON”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper WE2WH03, unpublished.
- A. Navitski, S. Lagotzky, G. Mueller, D. Reschke, and X. Singer, “Surface Roughness and Correlated Enhanced Field Emission Investigations of Electropolished Niobium Samples”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO045, pp. 316-320.
- J. Holma and M. J. Barnes, “Evaluation of Components for the High Precision Inductive Adder for the CLIC Damping Rings”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD076, pp. 3692-3694.
- A. A. Astapov, V. P. Bamblevski, and L. N. Zaitsev, “Induced Radioactivity of the Septum Magnet of the Beam Slow Extraction at the Nuclotron”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP052L, pp. 2624-2626.
- F. Bertinelli and R. Jung, “Design and Construction of LEP Collimators”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1564-1567.
- V. K. Vorobjev, E. V. Klimenkov, V. M. Mokhov, and E. S. Nelipovich, “A Second Radio-Frequency Harmonic in the U-70 Booster”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1020-1023.
- M. El Khaldi et al., “The RF System of Thomx”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 551-553.
- J. Holma and M. J. Barnes, “Preliminary Design of an Inductive Adder for CLIC Damping Rings”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPO032, pp. 3409-3411.
- K. Endo et al., “Compact Proton and Carbon Ion Synchrotrons for Radiation Therapy”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI087, pp. 2733-2735.
- V. S. Skachkov, “A Variable Gradient Rare Earth Permanent Alpha-Magnet”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP3B17, pp. 2122-2124.
- G. Stover, R. Dwinell, J. Halliwell, and M. Nyman, “Operational Results for the Raster Scanning Power Supply System Constructed at the Bevalac Biomedical Facility”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1890-1893.
- T. Miyajima, “Effect of Number of Macro Particles on Time Evolution of Phase Space Distribution”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 414-416.
- A. Gallo et al., “DAFNE Broadband Impedance”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI025, pp. 1494-1496.
- B. Mustapha et al., “Alternative Design for the RISP Pre-Stripper Linac”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 531-534.
- E. A. Simonov, E. B. Levichev, and D. N. Shatilov, “Application of Frequency Map Analysis to Beam-Beam Effects Study in Crab Waist Collision Scheme”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE075, pp. 4692-4694.
- I. M. Kapchinskij, A. M. Kozodaev, N. V. Lazarev, and V. S. Skachkov, “Design and Development of Permanent Magnet Quadrupoles for Ion Linacs”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper F07, pp. 350-351.
- M. El Khaldi and W. Kaabi, “Experimental Study of Multipactor Suppression in Dielectric Materials”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2753-2756.
- D. L. Brown, X. Geng, S. W. Lee, M. Wezensky, and A. P. Zhukov, “New Controller for High Voltage Converter Modulator at Spallation Neutron Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3621-3623.
- J. Holma, M. J. Barnes, and S. J. Ovaska, “Modelling of Parasitic Inductances of a High Precision Inductive Adder for CLIC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA033, pp. 738-740.
- A. A. Derbenev et al., “Monitoring and Archiving of NSLS-II Booster Synchrotron Parameters”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC021, pp. 587-590.
- W. Leemans et al., “Laser Plasma Sources for High Brightness Beams: From THz to X-rays”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THOA001, pp. XX-XX.
- Yu. I. Maltseva and V. G. Prisekin, “Optical Fiber Based Beam Loss Monitor for the BINP e-e+ Injection Complex”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 486-488.
- D. Alesini, R. Corsini, A. Gallo, F. Marcellini, D. Schulte, and I. Syratchev, “Studies on the RF Deflectors for CTF3”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP6B09, pp. 465-467.
- D. Howard, R. Dwinell, B. Feinberg, R. Fuhrman, and R. Sorensen, “Computer Aided Field Measurements of the SUPERHILAC Alvarez Cavities”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 112-115.
- J. Y. Huang, S. H. Kim, S. H. Nam, and S. S. Park, “Klystron-Modulator System Performance for PLS 2-GeV Electron Linac”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP2B19, pp. 2367-2369.
- S. Boychenko et al., “Towards a Second Generation Data Analysis Framework for LHC Transient Data Recording”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 802-805.
- P. Michelato et al., “An X-Ray Fluorescence Probe for Defect Detection in Superconducting 1.3 GHz Cavities”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP110, pp. 736-738.
- H. Reymond, O. Ø. Andreassen, M. Charrondiere, C. Charrondière, and P. D. Jankowski, “Enhancing Measurement Quality in HL-LHC Magnets Testing Using Software Techniques on Digital Multimeter Cards-Based System”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP087, pp. 729-734.
- J. Martinez-Darve, K. Artoos, P. Cruikshank, N. Kos, and C. Rathjen, “Measurement of the Mechanical Behaviour of the LHC Beam Screen During a Quench”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH035, pp. 2162-2164.
- D. Alesini et al., “Design Status of a High Harmonic RF System for DAFNE”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP1B15, pp. 1495-1497.
- J. Smedley et al., “QE Measurements of a Nb-Pb SRF Photoinjector”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 11, pp. 95-98.
- J. Y. Huang et al., “RHIC Injection Transport Beam Emittance Measurements”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPF04, pp. 45-48.
- M. F. Blinov et al., “High Power Neutron Converter for Low Energy Proton/Deuteron Beams: Liquid Metal Driving System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC085, pp. 256-258.
- D. Khan and T. O. Raubenheimer, “LCLS-II Bunch Compressor Study: 5-Bend Chicane”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP027, pp. 755-762.
- A. Navitski et al., “ILC-HiGrade Cavities as a Tool of Quality Control for European XFEL”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP043, pp. 212-215.
- J. M. Lee, J. Y. Huang, and C. Kim, “Inverse Response Matrix Computation for the Storage Ring Slow Orbit Feedback Control: Synthesized Topological Inversion Computation”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPA34, pp. 431-433.
- A. M. Kozodaev, N. V. Lazarev, D. A. Liakin, A. M. Raskopin, and V. S. Skachkov, “Simulation of Proton Beam Behaviour in High Energy Linac with Few-Gaps Resonators at Failure of One or Some of Them”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4B02, pp. 830-832.
- S. Ravat, L. Deront, A. Kehrli, and X. Pons, “A Safety System for Experimental Magnets Based on CompactRIO”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC053, pp. 210-213.
- D. A. Goldberg, G. R. Lambertson, L. Shalz, and F. Voelker, “Measurement of Frequency Response of LBL Stochastic Cooling Arrays for TeV-1 Storage Rings”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2168-2171.
- V. A. Koshelev et al., “Design of 4-vane RFQ with Magnetic Coupling Windows for Nuclotron Injector Lu-20”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 575-577.
- K. Artoos et al., “Status of the HL-LHC Crab Cavity Tuner”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 646-651.
- N. Carmignani, W. De Nolf, A. Franchi, B. Nash, C. Sahle, and L. Torino, “Measurements of the Momentum Compaction Factor of the ESRF Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1392-1395.
- A. D. Palczewski, B. Bullock, C. A. Cooper, S. C. Joshi, A. Navitski, and A. A. Rossi, “R&D Progress in SRF Surface Preparation With Centrifugal Barrel Polishing (CBP) for both Nb and Cu”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUIOB01, pp. 398-403.
- J. Gutekunst, F. Klumb, G. Kautzmann, H. M. Durand, and M. Sosin, “Continuous position estimation for the full remote alignment system of the High Luminosity LHC upgrade”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG36, pp. 3337-3340.
- M. Nagaenko and I. Pavletsov, “Simulation of Beam Optics and Beam-Degrader Interaction for COMBAS Fragment-Separator”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1394-1397.
- A. A. Asseev, A. P. Elin, A. V. Kalajdov, S. N. Lapitskij, and A. V. Minchenko, “Non Resonant Slow Extraction of Protons from the IHEP Accelerator to the SWD Setup”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1486-1488.
- F. Daly, S. Fisher, R. Kurita, and J. Brian Langton, “Mechanical Design of the HER Synchrotron Light Monitor Primary Mirror for the PEP-II B-Factory”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P050, pp. 2014-2016.
- W. A. Barth et al., “First Heavy Ion Beam Acceleration with a Superconducting Multi Gap CH-cavity”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 215-219.
- E. A. Levterova, A. A. Baldin, A. I. Berlev, I. A. Kryachko, M. Paraipan, and S. I. Tyutyunnikov, “TFBC Detectors Application for the Study of the Energy Spectrum of Neutrons Produced by Interaction of Uranium Target With the 1 - 8 GeV Incident Beams of Deutrons”, presented at the 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, paper MOPSA30, unpublished.
- V. S. Skachkov, I. M. Kapchinskiy, N. V. Lazarev, and A. V. Selin, “Circular Permanent Magnet Quadrupoles for Higher Frequency and Higher Shunt Impedance Linacs”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1400-1403.
- A. Navitski et al., “R&D on Cavity Treatments at DESY Towards the ILC Performance Goal”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP053, pp. 240-243.
- F. E. Emanov, D. Bolkhovityanov, A. R. Frolov, and Ye. A. Gusev, “Extending VEPP-5 Control System by Middleware for Injection/extraction Automation”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC25, pp. 371-373.
- I. V. Chuvilo et al., “Proton 36 MeV, 0.5 mA Linac ISTRA-36 as a Driver Multipurpose Irradiation Test Facility”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP078G, pp. 2674-2678.
- J. Holma, M. J. Barnes, and C. Belver-Aguilar, “Measurements on Prototype Inductive Adders with Ultra-flat-top Output Pulses for CLIC DR Kickers”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 128-130.
- A. M. Kozodaev, N. V. Lazarev, D. A. Liakin, A. M. Raskopin, and V. S. Skachkov, “Reliability Increase Ways for High-Power Linacs - ADS Drivers”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4B03, pp. 942-944.
- S. Boychenko, M. A. Galil?â, J. C. Garnier, M. Zerlauth, and M. Zenha-Rela, “Multi-Criteria Partitioning on Distributed File Systems for Efficient Accelerator Data Analysis and Performance Optimization”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1436-1441.
- A. Navitski, K. Fl?Âttmann, S. Lederer, and G. Mueller, “Novel UHV Scanning Anode Field Emission Microscope (SAFEM) for Dark Current Investigations on Photocathodes”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO044, pp. 312-315.
- J. D. Mammosser et al., “Results From the Proton Power Upgrade Project Cavity Quality Assurance Plan”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 801.
- E. Minehara, P. Bilquist, W. Evans, F. Lynch, and R. Pardo, “Design of the ATLAS PIIECR Ion Source”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper M-06, pp. 725-727.
- K. Yoo, M. Chung, S. Heo, J. H. Lee, Y. H. Park, and C. Lim, “Offline Test of EBIS Charge Breeder for RAON Facility Using Cs1+ Ion Beam”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper FR4WH03, unpublished.
- R. Ghanbari et al., “Correlating Lambda Shift Measurements with RF Performance in Mid-T Heat Treated Cavities”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB021, pp. 124-128.
- G. M. Wang et al., “NSLS II Injector Integrated Testing”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA063, pp. 3285-3287.
- S. W. Lee and Y. W. Kang, “RF and Thermo-Mechanical Considerations in Designing the Waveguide Iris Coupler for the Drift Tube Linac in the ORNL Spallation Neutron Source”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3796-3798.
- T. Kramer et al., “Feasibility of kicker systems for FCC-ee and injectors”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM065, pp. 470-473.
- H. Guler et al., “Power Coupler Design for the LUCRECE Project”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3732-3735.
- V. Gubin, O. Alyakrinsky, S. P. Bardakhanov, and M. Golkovsky, “About Carbides-made Nanoceramics Fission Target for RIB Production”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC089, pp. 268-270.
- D. Woog, M. J. Barnes, L. Ducimeti?â, J. Holma, and T. Kramer, “Design of an Inductive Adder for the FCC Injection Kicker Pulse Generator”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3312-3315.
- G. Felcsuti and J. B. González Fernández, “Structural Dynamic Testing and Design Evaluation of the Formax Detector Gantry”, presented at the MEDSI (MEDSI'23), Beijing, China, Nov. 2023, paper THOBM01, unpublished.
- I. Sakai et al., “Opposite Field Septum Magnet System for the J-PARC 50GeV Ring Injection”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT079, pp. 1339-1341.
- G. Zschornack et al., “A New Ion Beam Beam Facility for Slow Highly Charged Ions”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT023, pp. 1189-1191.
- B. Henrist, P. Costa Pinto, S. Fiotakis, M. Himmerlich, and C. Kouzios, “Large scale production of amorphous carbon coatings for the new beam screens of the HL-LHC project”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7175, this conference.
Back to search