Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. H. Ranjbar et al., “Progress on RCS eRHIC Injector Design”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 115-117. doi:10.18429/JACoW-IPAC2018-MOPMF016
[n] O. H. Rahman, J. Skaritka, and E. Wang, “Novel Design of a HVDC Magnetized Electron Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4034-4036. doi:10.18429/JACoW-IPAC2021-THPAB141
[n] M. Neubauer, T. Blassick, R. Johnson, G. Kazakevich, M. Popovic, and J. Wessel, “Magnetron-driven superconducting linacs for UNF transmutation”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB082, unpublished.
[n] Y. Zhang, H. Z. Ma, and J. Yue, “Some Preliminary Experiments using LIBERA BPMs in BEPCII”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC107, pp. 1266-1268.
[n] R. Hettel et al., “The 10 Hz Resonant Magnet Power Supply for the SSRL 3 GeV Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 926-929.
[n] F. Z. Hsiao et al., “The Pilot-Runs of the Helium Cryogenic System for the TLS Superconducting Cavity”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE038, pp. 2402-2404.
[n] D. Boussard, L. Evans, J. Gareyte, T. Linnecar, W. Mills, and E. J. N. Wilson, “Acceleration and Storage of a Dense Single Bunch in the CERN SPS”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3484-3487.
[n] G. Geloni et al., “Investigation of multi-modes in Hard X-ray Self-seeding operation at the European XFEL”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL019, unpublished.
[n] S. Yamamoto, “Development of the Very Short Period Undulators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1845-1847. doi:10.18429/JACoW-IPAC2014-WEOAA02
[n] S. H. Chang et al., “The Effect of Improving the Temperature Variation at the SSRC Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B19, pp. 2483-2485.
[n] G. Isoyama et al., “Solid-State Switch for a Klystron Modulator for Stable Operation of a THz- FEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP058, pp. 868-870.
[n] S. Bai, J. Gao, P. Bambade, and G. R. White, “Simulation on the Breaking of x Multiknob Orthogonality in the Presence of Gradient and Coupling Errors and Experimental Investigation”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO017, pp. 1919-1921.
[n] A. Macridin, J. F. Amundson, and E. G. Stern, “Numerical simulations of transverse modes in Gaussian bunches with space charge”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 575-578. doi:10.18429/JACoW-IPAC2015-MOPMA017
[n] L. Chen et al., “The Development of the LLRF Control System for the New High Power Test Stand of Couplers”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 227-230. doi:10.18429/JACoW-SRF2017-MOPB072
[n] R. Gerig, M. May, C. Moore, S. Ohnuma, S. Pruss, and F. Turkot, “Design, Installation, and Commissioning of the Dzero Overpass at the Fermilab Main Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1666-1669.
[n] C. G. Trahern and J. Zhou, “Lattice Parameters Database and Operational Simulation at FNAL and SSCL”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 207-210.
[n] S. Molloy et al., “Measurement of the Beam's Trajectory Using the Higher Order Modes it Generates in a Superconducting Accelerating Cavity”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THOAC03, pp. 2642-2644.
[n] T. Linnecar and W. Scandale, “A Transverse Schottky Noise Detector for Bunched Proton Beams”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2147-2150.
[n] D. Gurd, M. Hemmer, A. Jain, S. Sathe, J. Smith, and J. Wei, “Magnet & Survey Database for the SNS Accumulator Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3B16, pp. 1880-1882.
[n] J. H. Han, K. Fl?Âttmann, J. Rowland, and S. Schreiber, “Jitter and Tolerance Study of FEL Injectors”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC45, pp. 344-347.
[n] E. Wang et al., “The Progress of High Current High Bunch Charge Polarized Electron HVDC Gun”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2160-2162. doi:10.18429/JACoW-IPAC2019-TUPTS103
[n] Y.-C. Chae and R. Soliday, “Development of SDDS-Compliant GENESIS and Its Application”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH104, pp. 2710-2712.
[n] W. X. Cheng, K. Ha, Y. Tian, and L.-H. Yu, “Precise Beam Orbit Response Measurement with AC Excitation”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 380-382. doi:10.18429/JACoW-IPAC2016-MOPMR058
[n] F. Rossi et al., “Study of the Thermo-Mechanical Behavior of the CLIC Two-Beam Modules”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI056, pp. 2818-2820.
[n] D. Gudkov, S. Lebet, G. Riddone, F. Rossi, and A. Samoshkin, “Experience on Fabrication and Assembly of the First Clic Two-Beam Module Prototype”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI055, pp. 2815-2817.
[n] T. Linnecar and W. Scandale, “Continuous Tune Measurements Using the Schottky Detector”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2185-2188.
[n] J. Aron et al., “Status Report on the ATLAS Superconducting Linear Accelerator”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0017, pp. 132-134.
[n] E. G. Stern, R. Ainsworth, J. F. Amundson, and B. C. Brown, “Simulations of the Fermilab Recycler for Losses and Collimation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 582-585. doi:10.18429/JACoW-IPAC2015-MOPMA019
[n] K. Fl?Âttmann, “Polarized and Unpolarized Positron Sources for Linear Colliders”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH2-03, pp. 681-685.
[n] J. Bisognano et al., “Progress Toward the Wisconsin Free Electron Laser”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP176, pp. 2444-2446.
[n] D. Boussard, G. Lambert, R. Lauckner, T. Linnecar, and W. Wingerter, “Real Time Fourier Analysis for the Observations of Fast ee- Instabilities in the CERN SPS”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1563-1566.
[n] R. Gerig, S. Pruss, and F. Turkot, “Simulations of the Fermilab Main Ring”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1123-1126.
[n] M. M. Dehler et al., “Fabrication of the CERN/PSI/ST X-band Accelerating Structures”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC012, pp. 86-88.
[n] K. W. Shepard, R. Benaroya, L. M. Bollinger, and C. H. Scheibelhut, “Split Ring Resonator for the Argonne Superconducting Heavy Ion Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1147-1150.
[n] J. Yue, J. S. Cao, L. Ma, Y. F. Sui, L. Wang, and X. Y. Zhao, “Longitudinal and Transverse Feedback Systems for the BEPCII Storage Rings”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC09, pp. 373-375.
[n] K. D. Jacobs and B. G. McAllister, “Turn-by-Turn Transverse Phase Space Measurements in Real Time”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH133, pp. 2395-2396.
[n] O. R. Blanco, P. Bambade, and R. Tomas, “CLIC 3 TeV Beam Size Optimization with Radiation Effects”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO003, pp. 1877-1879.
[n] K. Jacobs et al., “High Duty Factor Beams Extracted from the MIT-Bates South Hall Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W011, pp. 348-350.
[n] J. R. Chen, D. S. Lee, and Z. D. Tsai, “Cooling Air Flow Induced Thermal Deformation of the Magnet Lattice Girder”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B17, pp. 2435-2437.
[n] M. Doleans et al., “Status Report on the NSCL RF Fragment Separator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS039, pp. 3585-3587.
[n] J. Haimson, C. P. Sargent, and J. N. Weaver, “Highly Phase-Stable RF Power Circuits for the MIT-LNS Linac”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 595-598.
[n] R. Gerig, C. Moore, and S. Pruss, “Beam Quality Measurements in Fermilab Main Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2177-2180.
[n] G. I. Cancelo et al., “Analysis of DESY-FLASH LLRF Measurements for the ILC Heavy Beam Loading Test”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP077, pp. 2189-2191.
[n] A. H. Jaffey, R. Benaroya, and T. K. Khoe, “A Hybrid Superconducting Solenoid as a Focusing Element in a Superconducting Heavy-Ion Accelerator”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper B08, pp. 102-105.
[n] S. V. Benson, J. Gubeli, and M. Shinn, “Coherent Harmonics in the Super-Radiant Regime from an FEL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH117, pp. 2745-2747.
[n] P. Adams, “Beamline Computer Control by Interpreter”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 361-363.
[n] L. Sanchez et al., “Design, Fabrication and Tests of the Second Prototype of the Double-Length CLIC PETS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3887-3889. doi:10.18429/JACoW-IPAC2014-THPRI052
[n] G. I. Cancelo, E. James, and S. A. Wolbers, “Digital Signal Processing the Tevatron BPM Signals”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT011, pp. 1242-1244.
[n] J. Safranek, “Beam Dynamics in Wigglers: Tracking in PEP with Damping Wigglers and Measurements at Spear”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1307-1310.
[n] M. Aiba and M. B?Âge, “Beam-based Alignment of an X-FEL Undulator Section Utilizing Corrector Pattern”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD27, pp. 293-296.
[n] D. McComick et al., “Long Ion Chamber Systems for the SLC”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1531-1534.
[n] H. Witte and J. S. Berg, “Conceptual Design of a Quadrupole Magnet for eRHIC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2729-2731. doi:10.18429/JACoW-IPAC2015-WEPJE026
[n] A. Drees, P. Cameron, R. Michnoff, C. Montag, and M. Wilinski, “RHIC Transverse Injection Damping”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG044, pp. 2691-2693.
[n] J. Lorkiewicz et al., “Activities at NCBJ Towards Development of the Future, Fully-Superconducting, XFEL-Type, RF Electron Gun”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 566. doi:10.18429/JACoW-SRF2021-WEPFDV006
[n] W. Smith and E. Bjorklund, “A CAMAC-Based Knob Controller for the LAMPF Control System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 544-547.
[n] D. J. Wang, C. K. Kuan, H. C. Ho, S. Y. Perng, and J. R. Chen, “Mechanical Improvement in Beam Stability at NSRRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOM201, pp. XX-XX.
[n] R. Bossart, J. Bosser, L. Burnod, A. Chapman-Hatchett, E. D, and P. Mills, “The SPS Beam Instrumentation and Closed Orbit Correction”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1733-1736.
[n] O. Chubenko and A. Afanasev, “Modeling of Photoemission and Electron Spin Polarization from NEA GaAs Photocathodes”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1556-1559. doi:10.18429/JACoW-IPAC2015-TUPWA059
[n] R. Averill, K. Hatch, C. Sibley, and R. Gross, “Power Factor Correction at MIT-Bates Linear Accelerator Center with Pulsed Loads of up to 180 MW Peak (2.7 MW Average)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P058, pp. 3743-3745.
[n] H. Witte, I. Marneris, and V. H. Ranjbar, “Magnet Designs for the eRHIC Rapid Cycling Synchrotron”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2404-2406. doi:10.18429/JACoW-IPAC2018-WEPMF018
For LaTeX
Use Complete Form
For BibTeX
References
- V. H. Ranjbar et al., “Progress on RCS eRHIC Injector Design”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 115-117.
- O. H. Rahman, J. Skaritka, and E. Wang, “Novel Design of a HVDC Magnetized Electron Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4034-4036.
- M. Neubauer, T. Blassick, R. Johnson, G. Kazakevich, M. Popovic, and J. Wessel, “Magnetron-driven superconducting linacs for UNF transmutation”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB082, unpublished.
- Y. Zhang, H. Z. Ma, and J. Yue, “Some Preliminary Experiments using LIBERA BPMs in BEPCII”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC107, pp. 1266-1268.
- R. Hettel et al., “The 10 Hz Resonant Magnet Power Supply for the SSRL 3 GeV Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 926-929.
- F. Z. Hsiao et al., “The Pilot-Runs of the Helium Cryogenic System for the TLS Superconducting Cavity”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE038, pp. 2402-2404.
- D. Boussard, L. Evans, J. Gareyte, T. Linnecar, W. Mills, and E. J. N. Wilson, “Acceleration and Storage of a Dense Single Bunch in the CERN SPS”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3484-3487.
- G. Geloni et al., “Investigation of multi-modes in Hard X-ray Self-seeding operation at the European XFEL”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL019, unpublished.
- S. Yamamoto, “Development of the Very Short Period Undulators”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1845-1847.
- S. H. Chang et al., “The Effect of Improving the Temperature Variation at the SSRC Storage Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4B19, pp. 2483-2485.
- G. Isoyama et al., “Solid-State Switch for a Klystron Modulator for Stable Operation of a THz- FEL”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP058, pp. 868-870.
- S. Bai, J. Gao, P. Bambade, and G. R. White, “Simulation on the Breaking of x Multiknob Orthogonality in the Presence of Gradient and Coupling Errors and Experimental Investigation”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO017, pp. 1919-1921.
- A. Macridin, J. F. Amundson, and E. G. Stern, “Numerical simulations of transverse modes in Gaussian bunches with space charge”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 575-578.
- L. Chen et al., “The Development of the LLRF Control System for the New High Power Test Stand of Couplers”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 227-230.
- R. Gerig, M. May, C. Moore, S. Ohnuma, S. Pruss, and F. Turkot, “Design, Installation, and Commissioning of the Dzero Overpass at the Fermilab Main Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1666-1669.
- C. G. Trahern and J. Zhou, “Lattice Parameters Database and Operational Simulation at FNAL and SSCL”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 207-210.
- S. Molloy et al., “Measurement of the Beam's Trajectory Using the Higher Order Modes it Generates in a Superconducting Accelerating Cavity”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THOAC03, pp. 2642-2644.
- T. Linnecar and W. Scandale, “A Transverse Schottky Noise Detector for Bunched Proton Beams”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2147-2150.
- D. Gurd, M. Hemmer, A. Jain, S. Sathe, J. Smith, and J. Wei, “Magnet & Survey Database for the SNS Accumulator Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP3B16, pp. 1880-1882.
- J. H. Han, K. Fl?Âttmann, J. Rowland, and S. Schreiber, “Jitter and Tolerance Study of FEL Injectors”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC45, pp. 344-347.
- E. Wang et al., “The Progress of High Current High Bunch Charge Polarized Electron HVDC Gun”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2160-2162.
- Y.-C. Chae and R. Soliday, “Development of SDDS-Compliant GENESIS and Its Application”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH104, pp. 2710-2712.
- W. X. Cheng, K. Ha, Y. Tian, and L.-H. Yu, “Precise Beam Orbit Response Measurement with AC Excitation”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 380-382.
- F. Rossi et al., “Study of the Thermo-Mechanical Behavior of the CLIC Two-Beam Modules”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI056, pp. 2818-2820.
- D. Gudkov, S. Lebet, G. Riddone, F. Rossi, and A. Samoshkin, “Experience on Fabrication and Assembly of the First Clic Two-Beam Module Prototype”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI055, pp. 2815-2817.
- T. Linnecar and W. Scandale, “Continuous Tune Measurements Using the Schottky Detector”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2185-2188.
- J. Aron et al., “Status Report on the ATLAS Superconducting Linear Accelerator”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0017, pp. 132-134.
- E. G. Stern, R. Ainsworth, J. F. Amundson, and B. C. Brown, “Simulations of the Fermilab Recycler for Losses and Collimation”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 582-585.
- K. Fl?Âttmann, “Polarized and Unpolarized Positron Sources for Linear Colliders”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH2-03, pp. 681-685.
- J. Bisognano et al., “Progress Toward the Wisconsin Free Electron Laser”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP176, pp. 2444-2446.
- D. Boussard, G. Lambert, R. Lauckner, T. Linnecar, and W. Wingerter, “Real Time Fourier Analysis for the Observations of Fast ee- Instabilities in the CERN SPS”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1563-1566.
- R. Gerig, S. Pruss, and F. Turkot, “Simulations of the Fermilab Main Ring”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1123-1126.
- M. M. Dehler et al., “Fabrication of the CERN/PSI/ST X-band Accelerating Structures”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC012, pp. 86-88.
- K. W. Shepard, R. Benaroya, L. M. Bollinger, and C. H. Scheibelhut, “Split Ring Resonator for the Argonne Superconducting Heavy Ion Booster”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1147-1150.
- J. Yue, J. S. Cao, L. Ma, Y. F. Sui, L. Wang, and X. Y. Zhao, “Longitudinal and Transverse Feedback Systems for the BEPCII Storage Rings”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC09, pp. 373-375.
- K. D. Jacobs and B. G. McAllister, “Turn-by-Turn Transverse Phase Space Measurements in Real Time”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH133, pp. 2395-2396.
- O. R. Blanco, P. Bambade, and R. Tomas, “CLIC 3 TeV Beam Size Optimization with Radiation Effects”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO003, pp. 1877-1879.
- K. Jacobs et al., “High Duty Factor Beams Extracted from the MIT-Bates South Hall Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7W011, pp. 348-350.
- J. R. Chen, D. S. Lee, and Z. D. Tsai, “Cooling Air Flow Induced Thermal Deformation of the Magnet Lattice Girder”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4B17, pp. 2435-2437.
- M. Doleans et al., “Status Report on the NSCL RF Fragment Separator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS039, pp. 3585-3587.
- J. Haimson, C. P. Sargent, and J. N. Weaver, “Highly Phase-Stable RF Power Circuits for the MIT-LNS Linac”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 595-598.
- R. Gerig, C. Moore, and S. Pruss, “Beam Quality Measurements in Fermilab Main Ring”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2177-2180.
- G. I. Cancelo et al., “Analysis of DESY-FLASH LLRF Measurements for the ILC Heavy Beam Loading Test”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP077, pp. 2189-2191.
- A. H. Jaffey, R. Benaroya, and T. K. Khoe, “A Hybrid Superconducting Solenoid as a Focusing Element in a Superconducting Heavy-Ion Accelerator”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper B08, pp. 102-105.
- S. V. Benson, J. Gubeli, and M. Shinn, “Coherent Harmonics in the Super-Radiant Regime from an FEL”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH117, pp. 2745-2747.
- P. Adams, “Beamline Computer Control by Interpreter”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 361-363.
- L. Sanchez et al., “Design, Fabrication and Tests of the Second Prototype of the Double-Length CLIC PETS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3887-3889.
- G. I. Cancelo, E. James, and S. A. Wolbers, “Digital Signal Processing the Tevatron BPM Signals”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT011, pp. 1242-1244.
- J. Safranek, “Beam Dynamics in Wigglers: Tracking in PEP with Damping Wigglers and Measurements at Spear”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1307-1310.
- M. Aiba and M. B?Âge, “Beam-based Alignment of an X-FEL Undulator Section Utilizing Corrector Pattern”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper TUPD27, pp. 293-296.
- D. McComick et al., “Long Ion Chamber Systems for the SLC”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1531-1534.
- H. Witte and J. S. Berg, “Conceptual Design of a Quadrupole Magnet for eRHIC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2729-2731.
- A. Drees, P. Cameron, R. Michnoff, C. Montag, and M. Wilinski, “RHIC Transverse Injection Damping”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPG044, pp. 2691-2693.
- J. Lorkiewicz et al., “Activities at NCBJ Towards Development of the Future, Fully-Superconducting, XFEL-Type, RF Electron Gun”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 566.
- W. Smith and E. Bjorklund, “A CAMAC-Based Knob Controller for the LAMPF Control System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 544-547.
- D. J. Wang, C. K. Kuan, H. C. Ho, S. Y. Perng, and J. R. Chen, “Mechanical Improvement in Beam Stability at NSRRC”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOM201, pp. XX-XX.
- R. Bossart, J. Bosser, L. Burnod, A. Chapman-Hatchett, E. D, and P. Mills, “The SPS Beam Instrumentation and Closed Orbit Correction”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1733-1736.
- O. Chubenko and A. Afanasev, “Modeling of Photoemission and Electron Spin Polarization from NEA GaAs Photocathodes”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1556-1559.
- R. Averill, K. Hatch, C. Sibley, and R. Gross, “Power Factor Correction at MIT-Bates Linear Accelerator Center with Pulsed Loads of up to 180 MW Peak (2.7 MW Average)”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P058, pp. 3743-3745.
- H. Witte, I. Marneris, and V. H. Ranjbar, “Magnet Designs for the eRHIC Rapid Cycling Synchrotron”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2404-2406.
Back to search