JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	R. J. Nawrocky, J. Galayda, D. Klein, O. Singh, and L. H. Yu, “Automatic Steering of X-Ray Beams from NSLS Insertion Devices Using Closed Orbit Feedback”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1856-1859. 
[n]	D. Liska et al., “Mechanical Design of the High-Energy Beam-Transport Line for the FMIT 2-MeV Accelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2824-2827. 
[n]	M. P. Kepinski et al., “TREC: Traceability of Radioactive Equipment at CERN”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA042, pp. 3234-3236. 
[n]	L. Tkachenko et al., “A Possibility of Development of Superconducting Dipole for Fast-Cycling Magnetic Fields”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE005, pp. 2436-2438. 
[n]	M. A. Fraser et al., “Modelling the Radioactivity Induced by Slow-Extraction Losses in the CERN SPS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1897-1900. doi:10.18429/JACoW-IPAC2017-TUPIK086
[n]	A. W. Grau et al., “In-vacuum, Cryogen-free Field Measurement System for Superconducting Undulator Coils”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP067, pp. 714-716. 
[n]	H. V. Smith, P. Allison, and J. Sherman, “Pulsed H Beams from Penning SPS Sources Equipped with Circular Emitters”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-47, pp. 164-166. 
[n]	C. Peters et al., “Design and Performance of 40mm, 6.5 T, Collared, Cold-Iron Model Magnets”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3728-3731. 
[n]	P. K. Sigg, J. Cherix, H. R. Fitze, H. Frei, M. M?ñrki, and U. Schryber, “Invited Paper: High Beam Power RF-Systems for Cyclotrons”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-01, pp. 161-168. 
[n]	X. Y. Zhang et al., “Preliminary Design of 325 MHz Half-Wave Resonator”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWO025, pp. 2369-2371. 
[n]	Y. Cho, T. K. Khoe, J. Moenich, and L. G. Ratner, “A Cold-Bore Vacuum System Design for POPAE”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1293-1296. 
[n]	U. Pudasaini, M. J. Kelley, G. V. Eremeev, C. E. Reece, and J. Tuggle, “Post-Processing of Nb3Sn Coated Nb”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1190-1193. doi:10.18429/JACoW-IPAC2017-MOPVA144
[n]	D. J. Wang, C. K. Kuan, H. C. Ho, S. Y. Perng, and J. R. Chen, “Mechanical Improvement in Beam Stability at NSRRC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOM201, pp. XX-XX. 
[n]	F. Valentini, T. Ladzinski, P. Ninin, and L. Scibile, “Safety Testing for LHC Access System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD037, pp. 532-534. 
[n]	K. M. Terwilliger, “Orbit Dynamics for a Four-Spiral-Sector Cyclotron”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A16, pp. 73-75. 
[n]	G. Parzen, “Theory of the Tune Shift Due to Linear Coupling”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 658-661. 
[n]	N. Carmignani et al., “Lifetime Improvements with a Harmonic RF System for the ESRF EBS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1644-1647. doi:10.18429/JACoW-IPAC2016-TUPOR001
[n]	D. Z. Chen et al., “Progress of the RF Negative Ion Source Research at HUST”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 430-432. doi:10.18429/JACoW-IPAC2014-MOPME024
[n]	V. A. Anferov et al., “Siberian Snake Experiments at the IUCF Cooler Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEDR1, pp. 392-394. 
[n]	P. Wanderer et al., “Initial Test of a Fast-Ramped Superconducting Model Dipole for GSI's Proposed SIS200 Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB054, pp. 2162-2164. 
[n]	Th. J. M. Sluyters, R. Damm, and A. Otis, “A Single Pulse Transverse Phase Space Beam Analyser”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1143-1151. 
[n]	H. Vernon Smith, P. Allison, K. Saadatmand, and J. David Schneider, “Spatial Distributions of the Emitting Species in a Penning Surface-Plasma Source”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 659-662. 
[n]	G. Baribaud et al., “The LEP Beam Orbit Measurement System: Status and Running-in Results”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 137-140. 
[n]	G. Kim, H.-S. Kang, C. Kim, B. G. Oh, and D. C. Shin, “Wire Scanner Measurements at the PAL-XFEL”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 445-447. doi:10.18429/JACoW-IBIC2018-WEPB09
[n]	P. Koert, S. Eckhouse, A. Fisher, and N. Rostoker, “Design Criteria for Modified Elongated Betatron Systems”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 972-975. 
[n]	D. J. Ciardullo et al., “The AGS Booster Beam Position Monitor System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1347-1350. 
[n]	C. C. Friedrichs, B. M. Campbell, and L. Walling, “Design of an Accelerating Cavity for the Superconducting Super Collider Low-Energy Booster”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1020-1023. 
[n]	G. Parzen, “Calculating Orbit Properties of F-F Cyclotrons”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A09, pp. 40-44. 
[n]	N. K. Mahale and A. Furman, “Debunching and Capture in the LEB for the SSC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 386-389. 
[n]	D. J. Clark, “Invited Paper: Cyclotrons as Mass Spectrometers”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper L03, pp. 534-539. 
[n]	N. Hafz, D.-K. Ko, and J. Lee, “Generation of Stable GeV-class Electron Beams from Laser-Plasmas and their Applications in Compact FELs”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper THCAU05, pp. 521-523. 
[n]	S. Kuzikov, “A cryogenic dielectric pulse compressor”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 119-122. doi:10.18429/JACoW-LINAC2024-MOPB035
[n]	R. Frankel and I. E. Pyros, “Computer Interface Design between a Master Computer and a Slave Computer for Simulation Control and Instrumentation Monotoring of the Brookhaven 200 MeV Linac Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 412-414. 
[n]	H. Takeda and J. Billen, “Recent Improvements in the PARMILA Code”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAG028, pp. 3518-3520. 
[n]	A. A. Sulimov, V. Gubarev, and S. Yasar, “RF Aspects of Quality Control for Industrial XFEL Cavities Fabrication”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP052, pp. 237-239. 
[n]	R. Althaus et al., “Performance of Dipole Magnets in Helium II”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3280-3283. 
[n]	S. M. White et al., “Non-Linear Kickers Using Eddy Current Screens and Application to the ESRF”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 670-672. doi:10.18429/JACoW-IPAC2017-MOPIK063
[n]	C. Xu, M. J. Kelley, and C. E. Reece, “SRF Cavity Surface Topography Characterization Using Replica Techniques”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPC093, pp. 3497-3499. 
[n]	V. Ptitsyn et al., “Crossing Transition at RHIC”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA04, pp. 53-57. 
[n]	C. Montag et al., “RHIC Performance as a 100 GeV Polarized Proton Collider in Run-9”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC033, pp. 531-533. 
[n]	D. Dohan et al., “The SLS Test Facility - First Results”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP29C, pp. 1459-1461. 
[n]	A. I. Warwick, T. J. Fessenden, D. Keefe, C. H. Kim, and H. Meuth, “Performance of MBE-4, An Experimental Multiple Beam Induction Linear Accelerator for Heavy Ions”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 118-121. 
[n]	R. B. Neal, “Superconducting Linacs”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper B-13, pp. 196-203. 
[n]	B. K. Huang et al., “Embedded Linux on FPGA Instruments for Control Interface and Remote Management”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THDAULT04, pp. 1271-1273. 
[n]	C. Taylor et al., “A Novel Epoxy-Free Construction Method for Fabricating Dipole Magnets and Test Results”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3283-3286. 
[n]	D. G. Moore, O. Goudard, and L. Hardy, “j5 Logbook - A Commercial e-logbook”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUX04, pp. 52-54. 
[n]	J. M. Brennan, L. Ahrens, J. Alessi, J. Brodowski, J. Kats, and W. van Asselt, “A Faster Chopper for Programmed Population of the Longitudinal Phase Space of the AGS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1154-1157. 
[n]	R. P. Fliller et al., “Application of Machine Learning to Minimize Long Term Drifts in the NSLS-II Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1867-1869. doi:10.18429/JACoW-IPAC2018-WEPAF022
[n]	H. Suk, M. S. Hur, J.-H. Jang, and J.-U. Kim, “Progress of the Laser-Plasma Acceleration Research at KERI”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper FRXMA01, pp. 832-834. 
[n]	Y. Cho et al., “Effects of Depolarizing Resonances on a Circulating Beam of Polarized Protons during Acceleration or Storage in a Synchrotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1509-1512. 
[n]	H. Grote, “Beam Threading in the LHC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP05B, pp. 1277-1279. 
[n]	T. Ha, S. H. Kim, C. D. Park, S. Shin, G. Kim, and H. K. Park, “Introduction to 3D Printing Techniques for Accelerator Vacuum Systems”, in Proc. IPAC'20, Caen, France, May 2020, paper THVIR11, pp. XX-XX. 
[n]	K. Batchelor, “Choice of Initial Operating Parameters for High Average Current Linear Accelerators”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper C09, pp. 160-165. 
[n]	R. Frankel, “Variable Mode Solid State Magnet Cycle Timer”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 427-430. 
[n]	S. Suzuki, T. Asaka, Y. Hisaoka, T. Matsubara, T. Mitsui, and Y. Shoji, “Bunch Compression using the Transport Line and Short Bunch revolving in NewSUBARU”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THC3MA05, pp. 619-621. 
[n]	C. Bovet, “Present Performance of the CERN 800 MeV PS Booster (PSB)”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 221-226. 
[n]	T. deParry and L. G. Ratner, “Evaluation of High Stability Secondary Emission Monitors”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 923-927. 
[n]	L. Scibile et al., “The LHC radiation monitoring system for the environment and safety: from design to operation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD030, pp. 514-516. 
[n]	K. M. Terwilliger et al., “Acceleration of Polarized Protons in the Brookhaven AGS”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2031-2034. 
[n]	W. Merz, C. Ankenbrandt, and K. Koepke, “Transition Jump System for the Fermilab Booster”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1343-1346. 
[n]	A. Hopper and R. Seviour, “Wave Particle Cherenkov Interactions Mediated via Novel Materials”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1960-1962. doi:10.18429/JACoW-IPAC2016-TUPOY024
[n]	S. Kuzikov, “Simple Theory of Thermal Fatigue Caused by RF Pulse Heating”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP65, pp. 168-170. 
[n]	J. Y. Zhai et al., “IHEP Low-loss Large Grain 9-cell Cavity Fabrication and Processing”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC039, pp. 2974-2976. 
[n]	M. A. Leonova et al., “Higher-order Spin Resonances in 2.1 GeV/c Polarized Proton Beam”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP125, pp. 1716-1718. 
[n]	S. Roesler, M. Brugger, D. Forkel-Wirth, and J. Vollaire, “Studies of Induced Radioactivity and Residual Dose Rates around Beam Absorbers of Different Materials”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper WEO1B01, pp. 448-452. 
[n]	J. F. DeFord, G. D. Craig, G. Kamin, and L. Walling, “Computation of Wakefields in Structures containing Dispersive Materials”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper WE1-04, pp. 550-554. 
[n]	J. T. Keane, “Experiments on RF Field Patterns in the BNL Linac”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART4-4, pp. 398-406. 
[n]	M. Kinsho, “Status and Future Upgrade of J-PARC Accelerators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 999-1003. doi:10.18429/JACoW-IPAC2016-TUXA01
[n]	H. V. Smith, D. J. Adams, B. Jones, and C. M. Warsop, “Activation Models of the ISIS Collectors”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 893-895. doi:10.18429/JACoW-IPAC2014-MOPRI115
[n]	T. Nakamura et al., “Suppression of Transverse Instabilities by Chromaticity Modulation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THOBRA02, pp. 3647-3649. 
[n]	Y. Shoji and K. Takeda, “Single Shot Bunch-by-Bunch Beam Emittance Measurement of the SPring-8 Linac”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB038, pp. 261-263. 
[n]	S. Adam, J. Cherix, W. Joho, and M. Olivo, “Determination of Effective Acceleration Voltages in Cyclotrons Using the Phase Compression - Phase Expansion Effect”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper D-06, pp. 2146-2150. 
[n]	Y. Yang, A. Nassiri, T. L. Smith, G. J. Waldschmidt, G. Wu, and H. Wang, “Mode Damping Measurement for the APS Deflecting Cavity”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC02, pp. 787-789. 
[n]	J. Bywater, T. Khoe, R. Lari, C. Potts, W. Praeg, and L. Ratner, “A Pulsed Quadrupole System for Preventing Depolarization”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 869-872. 
[n]	R. Frankel, “The Knife Switch, The Relay and The IC”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 418-419. 
[n]	Y. S. Lee et al., “Development of Side-coupled X-band Medical Linear Accelerator for Radiotherapy”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 139-141. doi:10.18429/JACoW-LINAC2018-MOPO063
[n]	P. Ninin and L. Scibile, “The LHC Access Control System”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT031, pp. 1900-1902. 
[n]	U. Laier et al., “Design and Commissioning of the RF System of the Collector Ring at FAIR”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2765-2767. doi:10.18429/JACoW-IPAC2018-WEPML034
[n]	J. Claus and H. Foelsche, “Extraction for ISABELLE”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3065-3068. 
[n]	L. N. Drosdal et al., “Beam Stability and Tail Population at SPS Scrapers”, in Proc. HB'12, Beijing, China, Sep. 2012, paper MOP247, pp. 166-169. 
[n]	Y. Goren and D. Yu, “CONDOR Simulation of an 11.4GHz Traveling Wave Output Cavity”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 813-816. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search