Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Vandoni et al., “Budget, procurement and risk management for the HL-LHC project”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1660-1662. doi:10.18429/JACoW-IPAC2023-TUPA155
[n] E. Meier, G. LeBlanc, and Y. E. Tan, “Orbit Correction Studies using Neural Networks”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP057, pp. 2837-2839.
[n] C. J. R. Duncan et al., “A Generic Software Platform for Rapid Prototyping of Online Control Algorithms”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4063-4065. doi:10.18429/JACoW-IPAC2019-THPRB100
[n] P. Pok, F. Havart, and T. Ladzinski, “Integration of Personal Protective Equipment Checks in Access Control”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1613-1616. doi:10.18429/JACoW-ICALEPCS2017-THPHA100
[n] M. Abbaslou et al., “Design Considerations for a Proton Linac for a Compact Accelerator Based Neutron Source”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 878-883. doi:10.18429/JACoW-LINAC2022-FR1AA05
[n] B. Bru, “GALOPR, A Beam Transport Program, with Space-Charge and Bunching”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 660-663.
[n] H. Morales et al., “Vacuum Chamber for the 3 GeV SPEAR Injector Synchrotron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2278-2281.
[n] J. Boillot, B. Frammery, and E. Wildner, “The CERN-PS Controls System Operational Aspects”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1782-1785.
[n] N. A. Mezentsev et al., “Superconducting 7 Tesla Wiggler for Delta Synchrotron Radiation Source”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 410-413. doi:10.18429/JACoW-RUPAC2018-THPSC05
[n] C. Kim, J. H. Hong, H.-S. Kang, I. S. Ko, S. J. Lee, and D. C. Shin, “Stripline Beam Position Monitor for the PAL-XFEL”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 274-277. doi:10.18429/JACoW-IBIC2017-TUPCF26
[n] I. N. Birukov et al., “Recent Studies of Linac for Production of Radioactive Beams in the INR”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPR01, pp. 1119-1121.
[n] F. Toral et al., “Design and Calculation of a Superferric Combined Magnet for XFEL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS096, pp. 2598-2600.
[n] H. Kugler, S. Battisti, D. Brandt, J. P. Potier, and A. Verdier, “Closed Orbit Distortions and Their Corrections in the 600 MeV Electron-Positron Accumulator at LEP”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 758-761.
[n] Y. Bylinsky, V. Kukhtiev, P. Ostroumov, V. Paramonov, and R. E. Laxdal, “A Triple Gap Resonator Design for the Separated Function DTL at TRIUMF”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W010, pp. 1135-1137.
[n] H. C. Chen, C. L. Chen, H. H. Chen, C. H. Kuo, and Y. K. Lin, “Observation of Beam Disturbance Caused by ID Gap Variation at TLS Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4598-4600. doi:10.18429/JACoW-IPAC2017-THPVA067
[n] P. ?ülvarez, D. Dom?¡nguez, J. Lewis, Q. King, J. Serrano, and B. Todd, “PLL Usage in the General Machine Timing System for the LHC”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP532, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Vandoni et al., “Budget, procurement and risk management for the HL-LHC project”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA155, pp. 1660-1662.
- E. Meier, G. LeBlanc, and Y. E. Tan, “Orbit Correction Studies using Neural Networks”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPP057, pp. 2837-2839.
- C. J. R. Duncan et al., “A Generic Software Platform for Rapid Prototyping of Online Control Algorithms”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4063-4065.
- P. Pok, F. Havart, and T. Ladzinski, “Integration of Personal Protective Equipment Checks in Access Control”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1613-1616.
- M. Abbaslou et al., “Design Considerations for a Proton Linac for a Compact Accelerator Based Neutron Source”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 878-883.
- B. Bru, “GALOPR, A Beam Transport Program, with Space-Charge and Bunching”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 660-663.
- H. Morales et al., “Vacuum Chamber for the 3 GeV SPEAR Injector Synchrotron”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2278-2281.
- J. Boillot, B. Frammery, and E. Wildner, “The CERN-PS Controls System Operational Aspects”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1782-1785.
- N. A. Mezentsev et al., “Superconducting 7 Tesla Wiggler for Delta Synchrotron Radiation Source”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 410-413.
- C. Kim, J. H. Hong, H.-S. Kang, I. S. Ko, S. J. Lee, and D. C. Shin, “Stripline Beam Position Monitor for the PAL-XFEL”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 274-277.
- I. N. Birukov et al., “Recent Studies of Linac for Production of Radioactive Beams in the INR”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPR01, pp. 1119-1121.
- F. Toral et al., “Design and Calculation of a Superferric Combined Magnet for XFEL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS096, pp. 2598-2600.
- H. Kugler, S. Battisti, D. Brandt, J. P. Potier, and A. Verdier, “Closed Orbit Distortions and Their Corrections in the 600 MeV Electron-Positron Accumulator at LEP”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 758-761.
- Y. Bylinsky, V. Kukhtiev, P. Ostroumov, V. Paramonov, and R. E. Laxdal, “A Triple Gap Resonator Design for the Separated Function DTL at TRIUMF”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5W010, pp. 1135-1137.
- H. C. Chen, C. L. Chen, H. H. Chen, C. H. Kuo, and Y. K. Lin, “Observation of Beam Disturbance Caused by ID Gap Variation at TLS Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4598-4600.
- P. ?ülvarez, D. Dom?¡nguez, J. Lewis, Q. King, J. Serrano, and B. Todd, “PLL Usage in the General Machine Timing System for the LHC”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP532, pp. XX-XX.
Back to search