Favourites
For Word
[n] A. T. Annaluru et al., “1 + / N + Method: Numerical Simulation Studies and Experimental Measurements on the SPIRAL1 Charge Breeder”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 34-38. doi:10.18429/JACoW-ECRIS2018-MOC5
[n] B. Carlsten et al., “The Los Alamos Neutron Science Center (LANSCE) accelerator: Current condition and status of modernization efforts”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper THP083, unpublished.
[n] H. V. Smith, P. Allison, J. D. Schneider, J. E. Stelzer, C. Geisik, and D. R. Schmitt, “Initial Operation of the CW 8X H- Ion Source Discharge”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3172-3175.
[n] B. K. Popovic et al., “Design of Miniature Waveguides and Diamond Window Assembly for RF Extraction and Vacuum Isolation for the CWA”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 156. doi:10.18429/JACoW-MEDSI2020-TUPB06
[n] L. Andolfato et al., “The ELT primary mirror fault detection, isolation, and recovery software”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1372-1379. doi:10.18429/JACoW-ICALEPCS2025-THBR001
[n] D. McGinnis and J. M. Steimel Jr, “Measurement Techniques Using the Tektronix[registered] 3052 DSP System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2231-2234.
[n] A. Miyazaki, “SRF Fundamental/Nb Material”, presented at the SRF'23, Grand Rapids, MI, USA, Jun. 2023, paper THTUT01, unpublished.
[n] K. Hansz, H. Gaus, and H. Patel, “Ultra-fast switching utilizing an IVA topology for chopper applications”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 272-275. doi:10.18429/JACoW-NAPAC2025-MOP095
[n] S. Bettoni et al., “Design of the FCC-ee injector linacs up to 20 GeV beam energy”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 527-530. doi:10.18429/JACoW-IPAC2025-MOPM087
[n] I. N. Meshkov et al., “HV Electron Cooler for the NICA Collider”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA039, pp. 125-126.
[n] J. A. Holmes et al., “ORBIT: Beam Dynamics Calculations for High-Intensity Rings”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE022, pp. 1022-1024.
[n] F. F. Ni, Z. X. Li, R. X. Tian, Y. Wei, and J. X. Wu, “FPGA-Based Digital IQ Demodulator Used in the Beam Position Monitors for HIAF BRing”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 429-432. doi:10.18429/JACoW-HB2023-THAFP11
[n] Y. Chung et al., “Implementation of the Global and Local Beam Position Feedback Systems for the Advanced Photon Source Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ16, pp. 2702-2704.
[n] A. A. Khan and C. A. Preissner, “Bringing the Ground Up (When Is Two Less Than One?)”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 182. doi:10.18429/JACoW-MEDSI2020-TUPC02
[n] G. Huffman, D. Boilard, and D. Stone, “Power Limits for Accelerator Tubes from UHF to Ka Band”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0033, pp. 180-182.
[n] D. Z. Xie et al., “Status of the 45 GHz MARS-D ECRIS”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 17-20. doi:10.18429/JACoW-ECRIS2020-MOXZO01
[n] A. J. Clemens, D. Devereux, and A. Magro, “Integration of Bespoke Daq Software with Tango Controls in the SKAO Software Framework: From Problems to Progress”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1533-1535. doi:10.18429/JACoW-ICALEPCS2023-THPDP079
[n] M. A. Oothoudt, “Monitoring Production Target Thickness”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3106-3109.
[n] J. Conrad et al., “The Power and Polarisation Upgrade Project at the S-DALINAC Injector”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP007, pp. 398-400.
[n] V. Sabaiduc et al., “New High Intensity Compact Negative Hydrogen Ion Cyclotrons”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP017, pp. 81-83.
[n] J. D. Jarvis et al., “Demonstration of Optical Stochastic Cooling in an Electron Storage Ring”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper FRXD1, unpublished.
[n] A. Nicoletti and M. Martino, “Data-Driven Controller Design for High Precision Pulsed Power Converters for Bumper Magnets of the PS Booster”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1928-1930. doi:10.18429/JACoW-IPAC2017-TUPIK096
[n] R. Abukeshek et al., “Magnetic design of the commutational magnet and quadrupoles for PERLE accelerator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 85-88. doi:10.18429/JACoW-IPAC2023-MOPA023
[n] N. S. Sereno et al., “Bunch Length Measurements at the Advanced Photon Source (APS) Linear Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA10, pp. 1070-1072.
For LaTeX
Use Complete Form
For BibTeX
References
- A. T. Annaluru et al., “1 + / N + Method: Numerical Simulation Studies and Experimental Measurements on the SPIRAL1 Charge Breeder”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 34-38.
- B. Carlsten et al., “The Los Alamos Neutron Science Center (LANSCE) accelerator: Current condition and status of modernization efforts”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper THP083, unpublished.
- H. V. Smith, P. Allison, J. D. Schneider, J. E. Stelzer, C. Geisik, and D. R. Schmitt, “Initial Operation of the CW 8X H- Ion Source Discharge”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3172-3175.
- B. K. Popovic et al., “Design of Miniature Waveguides and Diamond Window Assembly for RF Extraction and Vacuum Isolation for the CWA”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 156.
- L. Andolfato et al., “The ELT primary mirror fault detection, isolation, and recovery software”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1372-1379.
- D. McGinnis and J. M. Steimel Jr, “Measurement Techniques Using the Tektronix[registered] 3052 DSP System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2231-2234.
- A. Miyazaki, “SRF Fundamental/Nb Material”, presented at the 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper THTUT01, unpublished.
- K. Hansz, H. Gaus, and H. Patel, “Ultra-fast switching utilizing an IVA topology for chopper applications”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 272-275.
- S. Bettoni et al., “Design of the FCC-ee injector linacs up to 20 GeV beam energy”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM087, pp. 527-530.
- I. N. Meshkov et al., “HV Electron Cooler for the NICA Collider”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper TUPSA039, pp. 125-126.
- J. A. Holmes et al., “ORBIT: Beam Dynamics Calculations for High-Intensity Rings”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE022, pp. 1022-1024.
- F. F. Ni, Z. X. Li, R. X. Tian, Y. Wei, and J. X. Wu, “FPGA-Based Digital IQ Demodulator Used in the Beam Position Monitors for HIAF BRing”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THAFP11, pp. 429-432.
- Y. Chung et al., “Implementation of the Global and Local Beam Position Feedback Systems for the Advanced Photon Source Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ16, pp. 2702-2704.
- A. A. Khan and C. A. Preissner, “Bringing the Ground Up (When Is Two Less Than One?)”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 182.
- G. Huffman, D. Boilard, and D. Stone, “Power Limits for Accelerator Tubes from UHF to Ka Band”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0033, pp. 180-182.
- D. Z. Xie et al., “Status of the 45 GHz MARS-D ECRIS”, in Proc. 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper MOXZO01, pp. 17-20.
- A. J. Clemens, D. Devereux, and A. Magro, “Integration of Bespoke Daq Software with Tango Controls in the SKAO Software Framework: From Problems to Progress”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP079, pp. 1533-1535.
- M. A. Oothoudt, “Monitoring Production Target Thickness”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3106-3109.
- J. Conrad et al., “The Power and Polarisation Upgrade Project at the S-DALINAC Injector”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP007, pp. 398-400.
- V. Sabaiduc et al., “New High Intensity Compact Negative Hydrogen Ion Cyclotrons”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP017, pp. 81-83.
- J. D. Jarvis et al., “Demonstration of Optical Stochastic Cooling in an Electron Storage Ring”, presented at the North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, paper FRXD1, unpublished.
- A. Nicoletti and M. Martino, “Data-Driven Controller Design for High Precision Pulsed Power Converters for Bumper Magnets of the PS Booster”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1928-1930.
- R. Abukeshek et al., “Magnetic design of the commutational magnet and quadrupoles for PERLE accelerator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA023, pp. 85-88.
- N. S. Sereno et al., “Bunch Length Measurements at the Advanced Photon Source (APS) Linear Accelerator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPA10, pp. 1070-1072.
Back to search
