Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. Jeram et al., “The Control System for the Accelerator of ANKA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02E, pp. 1691-1693.
[n] G. Milcinski, M. Plesko, and M. Sekoranja, “Experiences with Advanced CORBA Services”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP005, pp. XX-XX.
[n] R. Tikhoplav et al., “Terahertz Camera Development Status”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP050, pp. 4066-4068.
[n] N. Magnin et al., “Upgrade of the Trigger Synchronisation and Distribution System of the Beam Dumping System of the Large Hadron Collider”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 397-400. doi:10.18429/JACoW-ICALEPCS2015-MOPGF135
[n] J. D. Gilpatrick et al., “Proposed Beam Position and Phase Measurements for the LANSCE Linac”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB10, pp. 78-80.
[n] R. Ferdinand et al., “Commissioning of SPIRAL2 CW RFQ and Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2462-2465. doi:10.18429/JACoW-IPAC2017-WEOAA1
[n] T. G. Lee, Y. U. Nam, and M. K. Park, “New Development of EPICS-based Data Acquisition System for Millimeter-wave Interferometer in KSTAR Tokamak”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUCAUST05, pp. 577-580.
[n] T. Noll and F. Radu, “The Mechanics of the Vekmag Experiment”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 370-373. doi:10.18429/JACoW-MEDSI2016-WEPE38
[n] W. T. Weng, I.-H. Chiang, G. A. Smith, and A. Soukas, “The Multiwire Secondary Emission Monitor and the Emittance Measurement of the AGS Beam”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2331-2334.
[n] M. Peiniger, G. Mueller, H. Piel, and P. Thuens, “Nb3Sn for Superconducting Accelerators at 4.2 K”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1295-1298.
[n] N. M. Kroll et al., “A High Power SLED-II Pulse Compression System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 327-330.
[n] P. Acs et al., “Tango-Kepler Integration at ELI-ALPS”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 212-215. doi:10.18429/JACoW-ICALEPCS2015-MOPGF050
[n] R. Connolly, K. F. Johnson, and V. Yuan, “A Correction for Emittance-Measurement Errors Caused by Finite Slit and Collector Widths”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-19, pp. 657-659.
[n] C. Sanelli and H. Hsieh, “Design of the 1.8 Tesla Wiggler for the DAPhiNE Main Rings”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1391-1394.
[n] L. A. Ahrens et al., “High Intensity Proton Operation at the Brookhaven AGS Accelerator Complex”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 485-488.
[n] W. T. Weng, “The Lattice Design and Tolerance Analysis of the CBA Transport Line”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2463-2466.
[n] M. Bieler, S. Choroba, R. Giebeler, S. Gold, J. Hameister, and H.-Ch. Lewin, “Commissioning of the Hard Tube Pulser Experiment at DESY”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1933-1936.
[n] P. Grand, “Vacuum Requirements for Linacs”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 13-01, pp. 421-430.
[n] H. Fangohr et al., “Data Analysis Support in Karabo at European XFEL”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 245-252. doi:10.18429/JACoW-ICALEPCS2017-TUCPA01
[n] J. Bradley III, D. Rees, R. Przeklasa, R. Jaitly, G. Schofield, and M. Scott, “Operational Experience with Two Types of 2 MW HVDC Power Supplies on LEDA”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP145, pp. 1010-1012.
[n] D. F. C. Fernandez-Carreiras et al., “The Design of the Alba Control System: A Cost-Effective Distributed Hardware and Software Architecture.”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper FRBHMUST01, pp. 1318-1321.
[n] F. Di Maio, L. Abadie, C. S. Kim, K. Mahajan, D. Stepanov, and N. Utzel, “CODAC Core System, the ITER Software Distribution for I&C”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC079, pp. 281-284.
[n] D. P. Piso, I. Arredondo, M. Eguiraun, and S. Varnasseri, “ESS Bilbao Interlock System Approach”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC052, pp. 206-209.
[n] R. Eichhorn, F. M. Esser, A. Gussen, and S. Martin, “First Ideas Towards the Super-Conducting Magnet Design for the HESR at FAIR”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT056, pp. 3354-3356.
[n] K. R. Eppley, W. B. Herrmannsfeldt, and T. G. Lee, “Improving the Efficiency of Microwave Devices with a Double Output Cavity”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-29, pp. 109-111.
[n] F. Antoniou et al., “Transverse Emittance Studies at Extraction of the CERN PS Booster”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1058-1061. doi:10.18429/JACoW-IPAC2019-MOPTS087
[n] K. G. Antonyan, L. G. Hakopyan, E. M. Laziev, S. N. Movsesyan, and A. G. Oganessian, “Beam Position Monitor Based on Diffraction Radiation”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-92, pp. 926-928.
[n] M. Attal et al., “Commissioning of SESAME Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2694-2696. doi:10.18429/JACoW-IPAC2017-WEPAB050
[n] T. Torims et al., “Development of additively manufactured 750 MHz RFQ”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 600-603. doi:10.18429/JACoW-LINAC2024-THAA003
[n] D. Kiehlmann, U. Klein, M. Peiniger, and H. Vogel, “Fabrication of Normalconducting Cavities for Accelerator Application”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 922-925.
[n] L. Abadie et al., “SDD toolkit : ITER CODAC Platform for Configuration and Development”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC003, pp. 550-553.
[n] C. M. Chu, J. Galambos, J. Wei, C. K. Allen, and P. McGehee, “SNS Application Programming Plan”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP060, pp. XX-XX.
[n] M. Cornacchia, R. Lauckner, W. Mills, R. Stiening, E. J. N. Wilson, and G. von Holtey, “Non Linear Fields in the SPS and Their Compensation”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1482-1485.
For LaTeX
Use Complete Form
For BibTeX
References
- B. Jeram et al., “The Control System for the Accelerator of ANKA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP02E, pp. 1691-1693.
- G. Milcinski, M. Plesko, and M. Sekoranja, “Experiences with Advanced CORBA Services”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP005, pp. XX-XX.
- R. Tikhoplav et al., “Terahertz Camera Development Status”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP050, pp. 4066-4068.
- N. Magnin et al., “Upgrade of the Trigger Synchronisation and Distribution System of the Beam Dumping System of the Large Hadron Collider”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 397-400.
- J. D. Gilpatrick et al., “Proposed Beam Position and Phase Measurements for the LANSCE Linac”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB10, pp. 78-80.
- R. Ferdinand et al., “Commissioning of SPIRAL2 CW RFQ and Linac”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2462-2465.
- T. G. Lee, Y. U. Nam, and M. K. Park, “New Development of EPICS-based Data Acquisition System for Millimeter-wave Interferometer in KSTAR Tokamak”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper TUCAUST05, pp. 577-580.
- T. Noll and F. Radu, “The Mechanics of the Vekmag Experiment”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 370-373.
- W. T. Weng, I.-H. Chiang, G. A. Smith, and A. Soukas, “The Multiwire Secondary Emission Monitor and the Emittance Measurement of the AGS Beam”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2331-2334.
- M. Peiniger, G. Mueller, H. Piel, and P. Thuens, “Nb3Sn for Superconducting Accelerators at 4.2 K”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1295-1298.
- N. M. Kroll et al., “A High Power SLED-II Pulse Compression System”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 327-330.
- P. Acs et al., “Tango-Kepler Integration at ELI-ALPS”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 212-215.
- R. Connolly, K. F. Johnson, and V. Yuan, “A Correction for Emittance-Measurement Errors Caused by Finite Slit and Collector Widths”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-19, pp. 657-659.
- C. Sanelli and H. Hsieh, “Design of the 1.8 Tesla Wiggler for the DAPhiNE Main Rings”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1391-1394.
- L. A. Ahrens et al., “High Intensity Proton Operation at the Brookhaven AGS Accelerator Complex”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 485-488.
- W. T. Weng, “The Lattice Design and Tolerance Analysis of the CBA Transport Line”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2463-2466.
- M. Bieler, S. Choroba, R. Giebeler, S. Gold, J. Hameister, and H.-Ch. Lewin, “Commissioning of the Hard Tube Pulser Experiment at DESY”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1933-1936.
- P. Grand, “Vacuum Requirements for Linacs”, in Proc. 1963 Conf. on Proton Linear Accelerators (LINAC'63), New Heaven, CT, USA, Oct. 1963, paper 13-01, pp. 421-430.
- H. Fangohr et al., “Data Analysis Support in Karabo at European XFEL”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 245-252.
- J. Bradley III, D. Rees, R. Przeklasa, R. Jaitly, G. Schofield, and M. Scott, “Operational Experience with Two Types of 2 MW HVDC Power Supplies on LEDA”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP145, pp. 1010-1012.
- D. F. C. Fernandez-Carreiras et al., “The Design of the Alba Control System: A Cost-Effective Distributed Hardware and Software Architecture.”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper FRBHMUST01, pp. 1318-1321.
- F. Di Maio, L. Abadie, C. S. Kim, K. Mahajan, D. Stepanov, and N. Utzel, “CODAC Core System, the ITER Software Distribution for I&C”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC079, pp. 281-284.
- D. P. Piso, I. Arredondo, M. Eguiraun, and S. Varnasseri, “ESS Bilbao Interlock System Approach”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC052, pp. 206-209.
- R. Eichhorn, F. M. Esser, A. Gussen, and S. Martin, “First Ideas Towards the Super-Conducting Magnet Design for the HESR at FAIR”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT056, pp. 3354-3356.
- K. R. Eppley, W. B. Herrmannsfeldt, and T. G. Lee, “Improving the Efficiency of Microwave Devices with a Double Output Cavity”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-29, pp. 109-111.
- F. Antoniou et al., “Transverse Emittance Studies at Extraction of the CERN PS Booster”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1058-1061.
- K. G. Antonyan, L. G. Hakopyan, E. M. Laziev, S. N. Movsesyan, and A. G. Oganessian, “Beam Position Monitor Based on Diffraction Radiation”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-92, pp. 926-928.
- M. Attal et al., “Commissioning of SESAME Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2694-2696.
- T. Torims et al., “Development of additively manufactured 750 MHz RFQ”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 600-603.
- D. Kiehlmann, U. Klein, M. Peiniger, and H. Vogel, “Fabrication of Normalconducting Cavities for Accelerator Application”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 922-925.
- L. Abadie et al., “SDD toolkit : ITER CODAC Platform for Configuration and Development”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC003, pp. 550-553.
- C. M. Chu, J. Galambos, J. Wei, C. K. Allen, and P. McGehee, “SNS Application Programming Plan”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP060, pp. XX-XX.
- M. Cornacchia, R. Lauckner, W. Mills, R. Stiening, E. J. N. Wilson, and G. von Holtey, “Non Linear Fields in the SPS and Their Compensation”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1482-1485.
Back to search