JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. Ostoja-Gajewski, “IT Infrastructure Tips and Tricks for Control System and PLC”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1158-1161. doi:10.18429/JACoW-ICALEPCS2017-THBPA05
[n]	T. Mastorides, J. D. Fox, C. H. Rivetta, and D. Van Winkle, “Measurements and Analysis of Longitudinal HOM Driven Coupled Bunch Modes in PEP-II Rings”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF014, pp. 115-119. 
[n]	M. Major et al., “Materials Science Investigations of Nitrogen-Doped Niobium for SRF Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 99-101. doi:10.18429/JACoW-SRF2019-MOP028
[n]	S. Burger, F. Roncarolo, J. Martínez Samblas, and M. Gonzalez-Berges, “Upgrade and evolution of the ad target beam imaging system at CERN: a two-year performance analysis”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 395-399. doi:10.18429/JACoW-IBIC2025-TUPCO17
[n]	K. R. Prestwich and D. L. Johnson, “Development of a 18- Megavolt Marx Generator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 64-70. 
[n]	J. M. Schippers, “THE SUPERCONDUCTING CYCLOTRON AND BEAM LINES OF PSIÔÇÖS NEW PROTON THERAPY FACILITY ÔÇ£PROSCANÔÇØ”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20B2, pp. XX-XX. 
[n]	D. Wolff, C. Briegel, J. Dinkel, and H. Pfeffer, “Improving Regulation in the Fermilab Main Ring Magnet Power Supply System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3088-3091. 
[n]	J. D. Gilpatrick et al., “Proposed Beam Position and Phase Measurements for the LANSCE Linac”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB10, pp. 78-80. 
[n]	M. A. Audi, “Ion Pumps for UHV Systems, Cyclotrons Synchrotrons & Particle Accelerators”, presented at the Cyclotrons'22, Beijing, China, Dec. 2022, paper MOAO03, unpublished. 
[n]	D. Kuchler et al., “Operational Experience with the GTS-LHC Ion Source and Future Developments of the CERN Ion Injector”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper TUPP10, pp. 57-60. 
[n]	Y. J. Li, K. Balewski, and W. Decking, “Dynamic Aperture Studies for PETRA III”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS021, pp. 3320-3322. 
[n]	A. Shibayama, “125 MHz Cavity for NAR”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 240-243. 
[n]	M. Gasior, “First Results from the LHC Schottky Monitor Operated with Direct Diode Detection”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper TUPG044, pp. 222-224. 
[n]	W. B. Ingalls, “Recent Operating Experience with the H- Ion Injector at LAMPF/LANSCE”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP24, pp. 704-706. 
[n]	M. Ge, P. N. Koufalis, G. Kulina, M. Liepe, and J. T. Maniscalco, “Low-temperature Baking and Infusion Studies for High-gradient ILC SRF Cavities”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 466-469. doi:10.18429/JACoW-LINAC2018-TUPO057
[n]	J. D. Fox et al., “SPS Ecloud Instabilities - Analysis of Machine Studies and Implications for Ecloud Feedback”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB052, pp. 2806-2808. 
[n]	Z. A. Conway et al., “Development of a Superconducting Half-Wave Resonator for PXIE”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB067, pp. 624-626. 
[n]	M. Kastriotou, E. B. Holzer, E. Nebot Del Busto, M. J. Boland, and C. P. Welsch, “An Optical Fibre BLM System at the Australian Synchrotron Light Source”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 669-672. doi:10.18429/JACoW-IBIC2016-WEPG20
[n]	B. Rodriguez Mateos, T. Argyropoulos, V. Kain, M. Schenk, and M. Slupecki, “High-Dimensional Bayesian Optimization for Sparse Objectives: an Application for Automated Beam Commissioning in the Low Energy Ion Ring at CERN”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP6018, unpublished. 
[n]	M. Crane et al., “Network Upgrade for the SLC: PEP-II Network”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P049, pp. 2473-2475. 
[n]	R. Divi?á, C. So??s, P. Vande Vyvre, and A. Vascotto, “The ALICE Experiment Control System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O1_011. 
[n]	C. E. Reece, E. Ciancio, K. A. Keyes, and D. Yang, “A Study of the Effectiveness of Particulate Cleaning Protocols on Intentionally Contaminated Niobium Surfaces”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO062, pp. 746-750. 
[n]	J. G. De Villiers et al., “Numerical Orbit Tracking in 3D Through the Injector Cyclotron for Heavy Ions at iThemba LABS”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 71-74. doi:10.18429/JACoW-Cyclotrons2016-MOP10
[n]	M. Pereira, M. Lamont, G. J. M??ller, D. D. Teixeira, T. E. Lahey, and E. S. M. McCrory, “LHC Supertable”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN002, pp. 86-89. 
[n]	Ye. Ivanisenko et al., “Photo Injector Cathode Laser Beam Intensity and Pointing Position Diagnostics at PITZ”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPC02, pp. 147-149. 
[n]	J. M. Han et al., “Development of a Low-Energy Proton Accelerator System for the Proton Engineering Frontier Project (PEFP)”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB048, pp. 2832-2834. 
[n]	R. B. Spielman, W. A. Stygar, K. W. Struve, and J. F. Seamen, “PBFA Z: A 55 TW/4.5 MJ Electrical Generator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3C002, pp. 1235-1239. 
[n]	D. Trbojevic, G. Mahler, and S. Brooks, “FLASH proton therapy facility design with permanent magnet”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3613-3616. doi:10.18429/JACoW-IPAC2024-THPR46
[n]	Y. S. Cho, H. H. Lee, B. H. Choi, K. Y. Seo, H. J. Kweon, and J. M. Han, “3.0 MeV KTF RFQ LINAC”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THP004, pp. XX-XX. 
[n]	M. Dehn, K. Aulenbacher, J. Diefenbach, F. Fichtner, R. Herbertz, and W. Klag, “Testing a Digital Beam Position Stabilization for the P2-experiment at MESA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 888-890. doi:10.18429/JACoW-IPAC2015-MOPHA044
[n]	J. M. Schippers, “Accelerators for Medical Application: What Is So Special”, presented at the Cyclotrons'22, Beijing, China, Dec. 2022, paper THBO04, unpublished. 
[n]	P. R. Hanley, A. W. Haberl, and A. Taylor, “Water Cooled Targets for Intense Ion Beams”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 933-938. 
[n]	I. Dolenc Kittelmann et al., “Detector Response Studies of the ESS Ionization Chamber”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 183-186. doi:10.18429/JACoW-IBIC2023-TUP004
[n]	N. Tokuda, S. Arai, T. Fukushima, T. Morimoto, and E. Tojyo, “Acceleration Performance of a 50-MHz Split Coaxial RFQ and the Design of a 25.5-MHz Prototype”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 938-941. 
[n]	C. D. P. Levy, M. McDonald, P. W. Schmor, and S. Z. Yao, “Status of the TRIUMF Intense Polarized H Source”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B27, pp. 114-117. 
[n]	N. P. Sobenin et al., “Stabilization of the Polarization Plane in Traveling Wave Deflectors”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA036, pp. 3759-3761. 
[n]	E. Nebot Del Busto et al., “Measurement of Beam Losses Using Optical Fibers at the Australian Synchrotron”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WECZB3, pp. 515-520. 
[n]	D. Quartullo, S. C. P. Albright, E. N. Shaposhnikova, and H. Timko, “CERN PS Booster Longitudinal Dynamics Simulations for the Post-LS2 Scenario”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 140-145. doi:10.18429/JACoW-HB2016-MOPR028
[n]	W. X. Cheng, B. Bacha, Y. Hu, O. Singh, and H. Xu, “NSLS2 Visible Synchrotron Light Monitor Diagnostic Beamline Commissioning”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPF21, pp. 369-373. 
[n]	M. G. Minty, R. D?Âlling, N. V. Mokhov, and T. Toyama, “Summary from Working Group F: Instrumentation and Beam Material Interactions”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper FRO2AU02, pp. 453-460. 
[n]	D. Van Winkle et al., “Commissioning of the LHC Low Level RF System Remote Configuration Tools”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA063, pp. 1479-1481. 
[n]	K. Agari, Y. Morino, Y. Sato, and A. Toyoda, “Upgrades of Temperature Measurements and Interlock System for the Production Target at J-PARC Hadoron Experimental Facility”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 371-373. doi:10.18429/JACoW-ICALEPCS2015-MOPGF123
[n]	A. D. Ovsyannikov, S. A. Kozynchenko, and V. A. Kozynchenko, “On The Beam Dynamics Simulation In The Injection System”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 383-386. doi:10.18429/JACoW-RUPAC2016-WEPSB012
[n]	L. Shaw and C. D. Ziomek, “Advanced Modular Oscilloscopes and Digitizers Optimized for Accelerator Applications”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper MOVNB01, pp. 63-67. 
[n]	A. V. Smirnov et al., “A Metal-Dielectric Micro-Linac for Radiography Source Replacement”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1992-1994. doi:10.18429/JACoW-IPAC2016-TUPOY041
[n]	M. P. Kope?é, L. J. Dudek, A. Kisiel, M. A. Knafel, A. I. Wawrzyniak, and M. Zajac, “Universal Digital Aggregator for in-Line Signal Processing”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 352-354. doi:10.18429/JACoW-IPAC2017-MOPAB096
[n]	A. Rhyder, R. N. Fernandes, and A. C. Starritt, “Qt Based GUI System for EPICS Control Systems”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WECC03, pp. 10-11. 
[n]	M. Birk, R. Ducar, Q. Kerns, and G. Tool, “The RF Control System of the NAL Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 427-432. 
[n]	T. Hori, T. Mitsumoto, Y. Sasaki, and M. Sugitani, “Improvement of 150 MeV Racetrack Microtron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2877-2880. 
[n]	K. R. Prestwich et al., “Overview of High Intensity X-Ray and Gamma-Ray Sources”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 892-898. 
[n]	F. Furuta et al., “Measurement of Field Emission Dark Current from The Titanium, Copper, and Stainless Steel Electrodes Under The High DC-Field Gradient Condition”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU449, pp. 431-433. 
[n]	T. Hattori, E. Arai, Y. Oguri, K. Sato, and H. Suzuki, “Construction and Acceleration Characteristics of the Tokyo Institute of Technology Heavy Ion Linac”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-50, pp. 377-379. 
[n]	K. V. Ettinger, J. H. Fremlin, and N. A. Askouri, “Measurement of Wear and Corrosion by Surface Irradiation with Charged Particle Beams”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper G-08, pp. 518-521. 
[n]	J. M. Vogt, J. C. Bergstrom, and S. Hu, “Accurate Measurement of the Beam Energy in the CLS Storage Ring”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper WEPL004, pp. 36-37. 
[n]	C. Mai, B. B??sing, A. Gla?ƒl, S. Khan, D. Krieg, and A. Meyer auf der Heide, “Pulse Shaping Methods for Laser-Induced Generation of THz Radiation at the Delta Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1453-1456. doi:10.18429/JACoW-IPAC2019-TUPGW024

For LaTeX

Use Complete Form

For BibTeX

References

Back to search