JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	A. Seville, D. J. Adams, D. Bayley, I. S. K. Gardner, J. W. G. Thomason, and C. M. Warsop, “Progress on Dual Harmonic Acceleration on the ISIS Synchrotron”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC121, pp. 349-351. 
[n]	S. Berg et al., “The Advanced Photon Source Injector Test Stand:  Phase Two”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB001, pp. 2029-2031. 
[n]	F. Loyer et al., “Main Beam Diagnostics at GANIL”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper FP-02, pp. 585-587. 
[n]	T. Winkelmann, R. Cee, Th. Haberer, B. Naas, and A. Peters, “Long-Term Operation Experience With Two ECR Ion Sources and Planned Extensions at HIT”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper TUPOT016, pp. 153-155. 
[n]	J. Baader et al., “Status update on SUNADAE2 magnetic field test facility at European XFEL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1215-1218. doi:10.18429/JACoW-IPAC2023-MOPM101
[n]	J. Dietrich et al., “Non-destructive Beam Position and Profile Measurements Using Light Emitted by Residual Gas in a Cyclotron Beam Line”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC022, pp. 1095-1097. 
[n]	S. Pauliuk et al., “A Fast Switching Mirror Chamber for FLASH”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC027, pp. 124-126. 
[n]	S. Posen and M. Liepe, “First Cavity Results from the Cornell SRF Group's Nb3Sn Program”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THOBA2, pp. 1091-1093. 
[n]	L. Faillace, R. B. Agustsson, A. Kumar, and K. K. Pant, “Injector System for the IR-FEL at RRCAT”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP121, pp. 1137-1139. 
[n]	S. Pei et al., “Physical Design of the 500 MeV Electron Linac for the High Energy Photon Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1404-1406. doi:10.18429/JACoW-IPAC2018-TUPMF061
[n]	J. L. Conradie, “THE ACCELERATOR FACILITIES OF THE NATIONAL RESEARCH FOUNDATION IN SOUTH AFRICA”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCAU01, pp. XX-XX. 
[n]	R. Frankel, “The Use of Computer Developed and Generated Displays in the Monitoring and Control of Accelerators”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 837-840. 
[n]	A. I. Warwick et al., “Development of Heavy Ion Induction Linear Accelerators as Drivers for Inertial Confinement Fusion”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1521-1523. 
[n]	M. Chen et al., “QWR085 Design for Bisol Post Accelerator SCL2”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 413-414. doi:10.18429/JACoW-SRF2019-TUP011
[n]	J. Klabunde, E. Malwitz, J. Friedrich, and A. Schempp, “Upgrade of the HLI-RFQ Accelerator (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-06, pp. 704-706. 
[n]	B. H. Choi, K. S. Kim, Y. S. Cho, J. M. Han, W. S. Song, and Y. J. Kim, “A 3.0MeV KOMAC/KTF RFQ Linac”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUD01, pp. 542-544. 
[n]	M. Huening and G. W. Foster, “Vector Sum Control of an 8 GeV Superconducting Proton Linac”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT150, pp. 1482-1484. 
[n]	J. Wei et al., “China Spallation Neutron Source Design”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEZMA02, pp. 310-314. 
[n]	E. Shubin, V. V. Kolmogorov, and A. S. Styuf, “High Power Solid State RF Generator for Neutral Beam Injector”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 276-278. doi:10.18429/JACoW-RUPAC2016-TUPSA029
[n]	D. Kuzovkova, G. Hoffstaetter, J. Unger, and L. Smith, “Dynamic aperture of the RCS during bunch merges”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1003-1005. doi:10.18429/JACoW-IPAC2024-TUPC06
[n]	S. Schreiber, P. Michelato, L. Monaco, and D. Sertore, “On the Photocathodes Used at the TTF Photoinjector”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB016, pp. 2071-2073. 
[n]	A. Harvey, “Mineral-Insulated Conductors for Magnet Coils”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper G-6, pp. 707-718. 
[n]	L. Smith, “First magnetic field penetration results of multilayer samples and A15 materials for the use in SRF applications”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB016, unpublished. 
[n]	J. J. Nebrensky and P. M. Hanlet, “POMPOMs: Cost-Efficient Polarity Sensors for the MICE Muon Beamline”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD90, pp. 518-520. 
[n]	P. A. Seidl et al., “Recent Experiments at NDCX-II: Irradiation of Materials Using Short, Intense Ion Beams”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 755-757. doi:10.18429/JACoW-NAPAC2016-WEPOA29
[n]	J. M. Grossman, I. Mayergoyz, and C. D. Striffler, “Theoretical Studies of Collective Ion Acceleration in Linear Beam-Evacuated Drift Tube Systems”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2587-2590. 
[n]	J. M. Brennan, M. Blaskiewicz, J. Butler, J. DeLong, W. Fischer, and T. Hayes, “RF Techniques for Improved Luminosity at RHIC”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT159, pp. 905-907. 
[n]	G. D. Stover et al., “Investigations, Experiments, and Implications for Using Existing Pulse Magnets for 'topoff' Operation at the Advanced Light Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE067, pp. 3727-3729. 
[n]	E. J. Wolin et al., “Decoupling Control System Components Using Asynchronous Publish/Subscribe Middleware”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP074, pp. 809-811. 
[n]	A. Rowe, D. Assell, L. Elementi, T. Hamerla, S. Reeves, and T. Thode, “BCP system for the ANL-FNAL SCPF”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP47, pp. XX-XX. 
[n]	I. H. Yu et al., “The Design And Performance of the Prototype Digital Feedback RF Control System For the PLS Storage Ring”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA103, pp. 464-466. 
[n]	H. Yim, D. H. An, G. Hahn, and Y.-S. Kim, “Lattice Study of a Compact Synchrotron for Carbon Therapy”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper D-07, pp. 303-305. 
[n]	J. T. Maniscalco, P. N. Koufalis, and M. Liepe, “Modeling of the Frequency and Field Dependence of the Surface Resistance of Impurity-Doped Niobium”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2471-2474. doi:10.18429/JACoW-IPAC2018-WEPMF046
[n]	M. Braeuer, U. Hahn, and S. Toleikis, “A Mechanical Shutter to Select Single Bunch Trains at the FLASH Facility at DESY”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH064, pp. 470-473. 
[n]	J. Zheng, K. Chin, J. M. J. Madey, and E. Szarmes, “Simulations of the Newark FIR FEL Operation”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS59, pp. XX-XX. 
[n]	M. Popovic, L. Allen, and C. W. Schmidt, “Fermilab Linac Injector, Revisited”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPA06, pp. 917-919. 
[n]	M. A. Shapiro, G. Shvets, J. R. Sirigiri, and R. J. Temkin, “Metamaterial-Based Linear Accelerator Structure”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP083, pp. 2992-2994. 
[n]	H. Stockhorst, T. Katayama, R. Maier, D. Prasuhn, R. Stassen, and L. Thorndahl, “Compensation of Mean Energy Loss due to an Internal Target by Application of a Barrier Bucket and Stochastic Momentum Cooling at COSY”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper TUM2MCIO01, pp. 63-66. 
[n]	A. Gerhard et al., “RF Sparking in Accelerator Cavities”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1108-1111. 
[n]	I. V. Bylinskii, K. Fong, J. Lu, A. K. Mitra, and C. Owen, “RF Amplifier Choice for the ISAC Superconducting Linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FROAC02, pp. 3798-3800. 
[n]	A. Peters, Th. Haberer, and U. Scheeler, “From Standby Operation to Patient Treatment in 13 Months: Setting Up the MIT Accelerator Team”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4146-4148. doi:10.18429/JACoW-IPAC2016-THPOY025
[n]	B. Rachmilowitz et al., “Packaged photocathodes for X-ray free electron lasers”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1586-1587. doi:10.18429/JACoW-IPAC2025-TUPS074
[n]	R. Neswold and B. F. Harrison, “The Web as the Primary Control System User Interface”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 986. doi:10.18429/JACoW-ICALEPCS2019-WEDPR04
[n]	C. Johnstone, A. Bross, and I. Rakhno, “The MuCool Test Area at Fermilab”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT060, pp. 3482-3484. 
[n]	H. Stockhorst, M. Kuehn, H. Meuth, and J. Wei, “Longitudinal Phase Space Tracking of Particles in a Multiple Harmonic RF-System”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 962-965. 
[n]	Y. N. Grigor, A. Shcherbakov, A. Zelinsky, and O. Zvonareva, “Beam Emittance in the Electron Storage Ring with a Strong Betatron and Sinchrotron Oscillations Coupling”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP50C, pp. 1345-1346. 
[n]	G. Ferrini et al., “Cs2Te Photocathode for the TTF Injector II”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP068L, pp. 1510-1512. 
[n]	J. Bisognano, I. Haber, and L. Smith, “Threshold Behavior for Longitudinal Stability of Induction Linac Bunches”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2501-2504. 
[n]	M. Kastriotou et al., “BLM Crosstalk Studies on the CLIC Two-Beam Module”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 148-151. doi:10.18429/JACoW-IBIC2015-MOPB045
[n]	R. Cirami, I. Coretti, P. Di Marcantonio, M. Pucillo, A. Santin, and P. Santin, “The EVALSO Project: Software/Hardware Architecture and Remote Tests Results”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP092, pp. 853-855. 
[n]	J.-F. Ostiguy, C. M. Bhat, and V. A. Lebedev, “Modeling Longitudinal Dynamics in the Fermilab Booster Synchrotron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 873-876. doi:10.18429/JACoW-IPAC2016-MOPOY013
[n]	M. Guijarro et al., “BLISS: ESRF All-In-One, Python-based Experiment Control System”, presented at the ICALEPCS'23, Cape Town, South Africa, Oct. 2023, paper TUSDSC01, unpublished. 
[n]	J. Y. Zhai et al., “Dumbbell Fabrication and Tuning of the IHEP Large Grain 9-Cell Cavity”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO067, pp. 769-771. 
[n]	U. Pudasaini, G. V. Eremeev, M. J. Kelley, and C. E. Reece, “Recent Developments of Nb?Sn at Jefferson Lab for SRF Accelerator Application”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 713-716. doi:10.18429/JACoW-NAPAC2019-WEPLM52
[n]	P. Snopok and G. G. Hanson, “Six-Dimensional Cooling Simulations for the Muon Collider”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper TUM1MCIO04, pp. 59-62. 
[n]	S. Bai et al., “Machine Detector Interface for CEPC”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 217. doi:10.18429/JACoW-eeFACT2018-WEXBA05
[n]	T. Ieiri, H. Ishii, Y. Mizumachi, A. Ogata, J.-L. Pellegrin, and M. Tejima, “Beam Diagnostics of the Triastan  Accumulation Ring”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2356-2359. 
[n]	A. G. Valentinov et al., “New Superconducting Wigglers for KSRS”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 407-409. doi:10.18429/JACoW-RUPAC2018-THPSC04
[n]	S. Sergey, S. Maslennikov, E. Shkolnikov, and A. Agafonov, “Dynamics of Plasma-Beam Formations in the Acceleration Gap of the Pulse Neutron Generator-based Vacuum Neutron Tube”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC52, pp. 447-449. 
[n]	J. T. Maniscalco et al., “Statistical Modeling of Peak Accelerating Gradients in LCLS-II and LCLS-II-HE”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 804. doi:10.18429/JACoW-SRF2021-THPCAV009
[n]	M. H. Lieng, R. Appleby, G. Corti, and V. Talanov, “Numerical Analysis of Machine Background in the LHCb Experiment for the Early and Nominal Operation of LHC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC001, pp. 450-452. 
[n]	T. J. Fessenden et al., “The Experimental Test Accelerator (ETA) II”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3401-3404. 
[n]	S. J. Burger, P. J. Celliers, Z. B. du Toit, G. S. Z. Guasco, L. M. Roels, and H. A. Smit, “On the Design of the Central Region of an 8 MeV Injector Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B13, pp. 67-70. 
[n]	N. Hubert, M. El Ajjouri, and D. P?®deau, “New Beam Loss Monitor System at SOLEIL”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 118-121. doi:10.18429/JACoW-IBIC2019-MOPP017
[n]	J. Shi et al., “Development of Heavy Ion Radiotherapy Facilities in China”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEAO06, pp. 167-169. doi:10.18429/JACoW-CYCLOTRONS2022-WEAO06
[n]	G. Shvets and J. S. Wurtele, “Stability of Channel Guided Laser Propagation”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 790-793. 
[n]	O. F. Dyachenko et al., “Adjustment of a New Pre-stripping Section the Multicharge Ion Linear Accelerator (MILAC)”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP019, pp. 3410-3412. 
[n]	J. W. Angle, E. M. Lechner, A. D. Palczewski, C. E. Reece, M. J. Kelley, and F. A. Stevie, “SIMS Sample Holder and Grain Orientation Effects”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 401. doi:10.18429/JACoW-SRF2021-TUPFDV002
[n]	V. Baldini et al., “A PLC-Based System for the Control of an Educational Observatory”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC054, pp. 691-694. 
[n]	P. Kainberger, “Replacement of Outdated VME Boards as Starting Point for Control System Modernization”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_093. 
[n]	F. M. Velotti et al., “Exploitation of Crystal Shadowing via Multi-Crystal Array, Optimisers and Reinforcement Learning”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1707-1710. doi:10.18429/JACoW-IPAC2022-WEPOST013
[n]	J. Stiller, H. S. Matis, R. Miyamoto, A. Ratti, W. C. Turner, and S. M. White, “Simulation of the LHC BRAN Luminosity Monitor for High Luminosity Interaction Regions”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC020, pp. 498-500. 
[n]	K. Abrahamsson et al., “Performance of CRYRING with Improved Electron Cooling”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 380-385. 
[n]	P. Clout, S. Bair, A. Conley, R. Ford, M. Fuka, and N. Greene, “The Proton Storage Ring Control System”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2305-2308. 
[n]	T. M. Huang et al., “High Power Input Couplers for C-ADS”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB101, pp. 1383-1386. 
[n]	J. W. Xia et al., “HIRFL Status and HIRFL-CSR Project in Lanzhou”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5B002, pp. 342-347. 
[n]	C. Yao, Y.-C. Chae, and W. E. Norum, “An FPGA-based Bunch-by-Bunch Tune Measurement System for the APS Storage Ring”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM064, pp. 315-317. 
[n]	N. F. Shul'ga and V. I. Truten, “On the Coherent X-ray Radiation by Relativistic Electrons in a Crystal”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH029, pp. 2144-2146. 
[n]	S. Dobrovolsky and N. F. Shul, “Transition and Diffraction Radiation by Relativistic Electrons in a Pre-Wave-Zone”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI107, pp. 1867-1869. 
[n]	L. E. Boon, R. J. Dejus, K. C. Harkay, and M. S. Jaski, “Comparison of Simulations and Analytical Theory of Radiation Heating on the Advanced Photon Source Superconducting Undulator”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC06, pp. 1148-1150. 
[n]	D. R. S. Di Calafiori et al., “The CMS ECAL Detector Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THA002, pp. 633-635. 
[n]	Y. M. Pischalnikov et al., “Performance of the 650 MHz SRF Cavity Tuner for PIP II Project”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 652-655. doi:10.18429/JACoW-SRF2019-TUP083
[n]	W. Benker et al., “Investigations of Intense Pulsed Electron Beams From PSEUDO - SPARK Discharges”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1135-1138. 
[n]	V. Hatton, “Operational History of the SPS Collider 1981-1990”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2952-2955. 
[n]	E. C. Raka, “Damping Coherent Oscillations in the AGS”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1091-1096. 
[n]	H. L. Rutkowski, “An Induction Linac for the Second Phase of DARHT”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO2001, pp. 21-25. 
[n]	K. J. Wakefield et al., “Sample and Detector Positioning Instruments for the Wide Angle XPCS End Station at 8-ID-E, a Feature Beamline for the APS Upgrade”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 333. doi:10.18429/JACoW-MEDSI2020-WEPC13
[n]	R. J. Pasquinelli, “Twenty-five Years of Stochastic Cooling Experience at Fermilab”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper MOA2MCIO01, pp. 36-40. 
[n]	J. Staples, D. Oshatz, and T. Saleh, “Design of the SNS MEBT”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOD18, pp. 250-252. 
[n]	R. Wanzenberg et al., “Research Activities Towards a Conversion of PETRA III Into a Diffraction Limited Synchrotron Light Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3077-3080. doi:10.18429/JACoW-IPAC2017-WEPIK065
[n]	W. Hassenzahl, “A Comparison of the Costs of Superconducting Accelerator Dipoles Using NbTi, NB 3Sn and NbTiTa”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3277-3280. 
[n]	A. Seville et al., “Progress on the ISIS Synchrotron Low Power RF System Upgrade”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI063, pp. 2839-2841. 
[n]	F. Naito, “Present Status of J-PARC”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper MOXMA01, pp. XX-XX. 
[n]	L. W. Funk et al., “The 52 MHz RF System for PETRA II”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1102-1105. 
[n]	D. Kumar, G. G. Ga, M. Plesko, R. Huhmann, and S. Krepp, “Implementation of the Distributed Alarm System for the Particle Accelerator FAIR Using an Actor Concurrent Programming Model and the Concept of an Agent”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO029, pp. 102-104. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search