Favourites
For Word
[n] J. G. Power and G. Ha, “A Low Time-Dispersion Refractive Optical Transmission Line for Streak Camera Measurements”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1178-1180. doi:10.18429/JACoW-IPAC2015-MOPWI015
[n] A. Mapar, F. Pourboghrat, T. R. Bieler, and C. Compton, “Dynamic Hardening Rule; a Generalization of the Classical Hardening Rule for Crystal Plasticity”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP037, pp. 499-503.
[n] J. MacLachlan, “Reference Design for the Fermilab Linac Upgrade”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-24, pp. 103-105.
[n] G. Kube et al., “Micron-Scale Vertical Beam Size Measurements Based on Transition Radiation Imaging With a Schwarzschild Objective”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 327-329. doi:10.18429/JACoW-IBIC2015-TUPB011
[n] W. Beinhauer, H.-D. Graef, A. Richter, M. Krassilnikov, and T. Weiland, “Beam Dynamics On-Line Simulations for The S-DALINAC Injector”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO442, pp. 136-138.
[n] M. Ishii, Y. Ishizawa, M. T. Takeuchi, and T. Fukui, “Next Generation Control System Using the EtherCAT Technology”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 751-754. doi:10.18429/JACoW-ICALEPCS2017-TUPHA148
[n] E. P. Lee, A. Faltens, L. J. Laslett, and L. Smith, “Stabilization of Longitudinal Modes in a High Current Betatron”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2504-2507.
[n] J. C. Billy, J. P. Bojon, N. Hilleret, J. M. Jimenez, and I. Laugier, “Experience with the LEP Vacuum System at Energies above 90 GeV and Future Expectations”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUOA01A, pp. 314-316.
[n] D. L. Turner, “Software Tools for Emittance Measurement and Matching for 12 GeV CEBAF”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2792-2795. doi:10.18429/JACoW-IPAC2016-WEPOR053
[n] A. Novokhatski, M. Timm, and T. Weiland, “Properties of Surface Roughness Wake Fields”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP5A05, pp. 1441-1443.
[n] J. Chavanne, C. Penel, B. Plan, and F. Revol, “In-Vacuum Undulators at ESRF”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOPA013, pp. 253-255.
[n] T. Kaltenbacher, J. Repond, and C. Vollinger, “Characterization of Resonant Impedances of CERN-SPS Gate Valves”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3139-3142. doi:10.18429/JACoW-IPAC2017-WEPIK089
[n] E. N. Shaposhnikova, T. Argyropoulos, T. Bohl, A. Lasheen, J. Repond, and H. Timko, “Identification and Reduction of the CERN SPS Impedance”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 260-265. doi:10.18429/JACoW-HB2016-TUAM3X01
[n] S. K. Suhane et al., “Engineering Design of Vertical Test Stand Cryostat”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP033, pp. 874-876.
[n] E. Cormier-Michel et al., “Design of 10 GeV Laser Wakefield Accelerator Stages with Shaped Laser Modes”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC013, pp. 281-284.
[n] T. Sieber, D. Habs, O. Kester, A. Kolbe, and A. Schempp, “Design and Status of the RFQ for REX-ISOLDE”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4006, pp. 777-779.
For LaTeX
Use Complete Form
For BibTeX
References
- J. G. Power and G. Ha, “A Low Time-Dispersion Refractive Optical Transmission Line for Streak Camera Measurements”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1178-1180.
- A. Mapar, F. Pourboghrat, T. R. Bieler, and C. Compton, “Dynamic Hardening Rule; a Generalization of the Classical Hardening Rule for Crystal Plasticity”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP037, pp. 499-503.
- J. MacLachlan, “Reference Design for the Fermilab Linac Upgrade”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-24, pp. 103-105.
- G. Kube et al., “Micron-Scale Vertical Beam Size Measurements Based on Transition Radiation Imaging With a Schwarzschild Objective”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 327-329.
- W. Beinhauer, H.-D. Graef, A. Richter, M. Krassilnikov, and T. Weiland, “Beam Dynamics On-Line Simulations for The S-DALINAC Injector”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO442, pp. 136-138.
- M. Ishii, Y. Ishizawa, M. T. Takeuchi, and T. Fukui, “Next Generation Control System Using the EtherCAT Technology”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 751-754.
- E. P. Lee, A. Faltens, L. J. Laslett, and L. Smith, “Stabilization of Longitudinal Modes in a High Current Betatron”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2504-2507.
- J. C. Billy, J. P. Bojon, N. Hilleret, J. M. Jimenez, and I. Laugier, “Experience with the LEP Vacuum System at Energies above 90 GeV and Future Expectations”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUOA01A, pp. 314-316.
- D. L. Turner, “Software Tools for Emittance Measurement and Matching for 12 GeV CEBAF”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2792-2795.
- A. Novokhatski, M. Timm, and T. Weiland, “Properties of Surface Roughness Wake Fields”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP5A05, pp. 1441-1443.
- J. Chavanne, C. Penel, B. Plan, and F. Revol, “In-Vacuum Undulators at ESRF”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOPA013, pp. 253-255.
- T. Kaltenbacher, J. Repond, and C. Vollinger, “Characterization of Resonant Impedances of CERN-SPS Gate Valves”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3139-3142.
- E. N. Shaposhnikova, T. Argyropoulos, T. Bohl, A. Lasheen, J. Repond, and H. Timko, “Identification and Reduction of the CERN SPS Impedance”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 260-265.
- S. K. Suhane et al., “Engineering Design of Vertical Test Stand Cryostat”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP033, pp. 874-876.
- E. Cormier-Michel et al., “Design of 10 GeV Laser Wakefield Accelerator Stages with Shaped Laser Modes”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC013, pp. 281-284.
- T. Sieber, D. Habs, O. Kester, A. Kolbe, and A. Schempp, “Design and Status of the RFQ for REX-ISOLDE”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4006, pp. 777-779.
Back to search