Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] N. Aftab et al., “Improvements in longitudinal phase space tomography at PITZ”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4601-4604. doi:10.18429/JACoW-IPAC2023-THPL073
[n] A. Brinkmann et al., “Statistic to Eddy-Current Scanning of Niobium Sheets for European XFEL”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP032, pp. 171-173.
[n] S. Wang and V. Khachatryan, “Study of Transverse Resonance Island Buckets at CESR”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 199-202. doi:10.18429/JACoW-IPAC2022-MOPOST051
[n] J. A. Crittenden, H. X. Duan, A. E. Fagan, G. H. Hoffstaetter, V. Khachatryan, and D. Sagan, “Progress on the Measurement of Beam Size Using Sextupole Magnets”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 550-552. doi:10.18429/JACoW-IPAC2022-MOPOTK040
[n] C. Richard et al., “Slice energy spread measurements of a 20 MeV electron beam at PITZ”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2240-2243. doi:10.18429/JACoW-IPAC2024-WEPG22
[n] C.-Y. Liao et al., “Motion protection framework for TPS insertion device control”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 3040-3042. doi:10.18429/JACoW-IPAC2025-THPS034
[n] H. Maniar, B. E. Chase, J. E. Dusatko, S. Khole, and D. Sharma, “PIP-II 800 MeV Proton Linac Beam Pattern Generator”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4426-4428. doi:10.18429/JACoW-IPAC2021-THPAB324
[n] P. A. P. Nghiem et al., “EuPRAXIA, a Step Toward a Plasma-Wakefield Based Accelerator With High Beam Quality”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2291-2295. doi:10.18429/JACoW-IPAC2019-WEZZPLS2
[n] A. Samoshkin, D. Gudkov, A. Solodko, and G. Riddone, “CLIC Two-Beam Module for the CLIC Conceptual Design and Related Experimental Program”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC008, pp. 1003-1005.
[n] D. J. Wang, R. Chen, and C. K. Kuan and J, “EXPERIMENTAL STUDY OF THERMAL DEFORMATION OF THE MAGNET GIRDER AT SRRC STORAGE RING”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP033, pp. XX-XX.
[n] H. Kaneko, Y. Taniguchi, and K. Yamazaki, “Conceptual Design of Centralized Control System for LHD”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 224-227. doi:10.18429/JACoW-ICALEPCS1991-S05SRN07
[n] R. Chen, J. C. Chang, Z. D. Tsai, D. S. Lee, and Y. C. Chang and J, “THE STATUS OF THE UTILITY SYSTEM STABILITY IMPROVEMENT STUDY AT TLS”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP032, pp. XX-XX.
[n] S. Zeeshan, D. Bazyl, M. Krasilnikov, X. Li, and I. Zagorodnov, “Simulation studies of SRF CW photoinjector brightness optimization for different RF gun gradients and photocathode laser pulse shapes”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2070, unpublished.
[n] G. Y. Hsiung, K. M. Hsiao, T. F. Lin, R. Chen, Z. D. Tsai, and S. N. Hsu and J, “DEVELOPMENT OF THE PHOTON BEAM POSITION MONITORS FOR THE TLS”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP015, pp. XX-XX.
[n] C. A. Larrieu and M. H. Bickley, “Software Design Concepts for Archiving and Retrieving Control System Data”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP075, pp. XX-XX.
[n] A. Aslam, M. Babzien, and S. Biedron, “Applications of Machine Learning in Photo-Cathode Injectors”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 441-442. doi:10.18429/JACoW-NAPAC2022-TUPA41
[n] B. Leung et al., “A W-band corrugated waveguide for high-efficiency high-gradient wakefield acceleration”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper SUP019, unpublished.
[n] P. Rauer, “Polarization based out-coupling for cavity based x-ray FELs”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1839-1842. doi:10.18429/JACoW-IPAC2023-TUPL037
[n] H. Kawaguchi and K. Fujita, “Development of Numerical Code for Self-consistent Wake Field Analysis with Curved Trajectory Electron Bunches”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH131, pp. 2230-2232.
[n] X. Li et al., “Matching of a Space-Charge Dominated Beam into the Undulator of the THz SASE FEL at PITZ”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3244-3247. doi:10.18429/JACoW-IPAC2021-WEPAB257
[n] T. Bolin et al., “Machine learning for data analysis and control of an MeV ultrafast electron diffraction system and a photocathode laser and gun system: updates”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1858-1861. doi:10.18429/JACoW-IPAC2024-TUPS76
[n] M. Moscatello et al., “NEWGAIN project at GANIL-SPIRAL2 : design of the new heavy ion injector for the superconducting linac”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1765-1767. doi:10.18429/JACoW-IPAC2023-TUPA193
For LaTeX
Use Complete Form
For BibTeX
References
- N. Aftab et al., “Improvements in longitudinal phase space tomography at PITZ”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL073, pp. 4601-4604.
- A. Brinkmann et al., “Statistic to Eddy-Current Scanning of Niobium Sheets for European XFEL”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP032, pp. 171-173.
- S. Wang and V. Khachatryan, “Study of Transverse Resonance Island Buckets at CESR”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 199-202.
- J. A. Crittenden, H. X. Duan, A. E. Fagan, G. H. Hoffstaetter, V. Khachatryan, and D. Sagan, “Progress on the Measurement of Beam Size Using Sextupole Magnets”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 550-552.
- C. Richard et al., “Slice energy spread measurements of a 20 MeV electron beam at PITZ”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG22, pp. 2240-2243.
- C.-Y. Liao et al., “Motion protection framework for TPS insertion device control”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS034, pp. 3040-3042.
- H. Maniar, B. E. Chase, J. E. Dusatko, S. Khole, and D. Sharma, “PIP-II 800 MeV Proton Linac Beam Pattern Generator”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4426-4428.
- P. A. P. Nghiem et al., “EuPRAXIA, a Step Toward a Plasma-Wakefield Based Accelerator With High Beam Quality”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2291-2295.
- A. Samoshkin, D. Gudkov, A. Solodko, and G. Riddone, “CLIC Two-Beam Module for the CLIC Conceptual Design and Related Experimental Program”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC008, pp. 1003-1005.
- D. J. Wang, R. Chen, and C. K. Kuan and J, “EXPERIMENTAL STUDY OF THERMAL DEFORMATION OF THE MAGNET GIRDER AT SRRC STORAGE RING”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEP033, pp. XX-XX.
- H. Kaneko, Y. Taniguchi, and K. Yamazaki, “Conceptual Design of Centralized Control System for LHD”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S05SRN07, pp. 224-227.
- R. Chen, J. C. Chang, Z. D. Tsai, D. S. Lee, and Y. C. Chang and J, “THE STATUS OF THE UTILITY SYSTEM STABILITY IMPROVEMENT STUDY AT TLS”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEP032, pp. XX-XX.
- S. Zeeshan, D. Bazyl, M. Krasilnikov, X. Li, and I. Zagorodnov, “Simulation studies of SRF CW photoinjector brightness optimization for different RF gun gradients and photocathode laser pulse shapes”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP2070, this conference.
- G. Y. Hsiung, K. M. Hsiao, T. F. Lin, R. Chen, Z. D. Tsai, and S. N. Hsu and J, “DEVELOPMENT OF THE PHOTON BEAM POSITION MONITORS FOR THE TLS”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEP015, pp. XX-XX.
- C. A. Larrieu and M. H. Bickley, “Software Design Concepts for Archiving and Retrieving Control System Data”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP075, pp. XX-XX.
- A. Aslam, M. Babzien, and S. Biedron, “Applications of Machine Learning in Photo-Cathode Injectors”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 441-442.
- B. Leung et al., “A W-band corrugated waveguide for high-efficiency high-gradient wakefield acceleration”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper SUP019, unpublished.
- P. Rauer, “Polarization based out-coupling for cavity based x-ray FELs”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL037, pp. 1839-1842.
- H. Kawaguchi and K. Fujita, “Development of Numerical Code for Self-consistent Wake Field Analysis with Curved Trajectory Electron Bunches”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH131, pp. 2230-2232.
- X. Li et al., “Matching of a Space-Charge Dominated Beam into the Undulator of the THz SASE FEL at PITZ”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3244-3247.
- T. Bolin et al., “Machine learning for data analysis and control of an MeV ultrafast electron diffraction system and a photocathode laser and gun system: updates”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS76, pp. 1858-1861.
- M. Moscatello et al., “NEWGAIN project at GANIL-SPIRAL2 : design of the new heavy ion injector for the superconducting linac”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA193, pp. 1765-1767.
Back to search