JaCoW Logo

Reference Search

Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	R. J. Jim?®nez Estupinan, D. R. S. Di Calafiori, G. Dissertori, L. Djambazov, W. Lustermann, and S. Zelepoukine, “CMS ECAL Detector Control System Upgrade Plan for the CERN Large Hadron Collider Long Shutdown II”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 69-72. doi:10.18429/JACoW-PCaPAC2018-WEP16
[n]	J. Reich, H. Beuscher, W. Braeutigam, and H. L. Hagedoorn, “Performance of ISIS at Julic”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 407-410. 
[n]	M. Kase et al., “Variable Frequency Linac, RILAC, as an Injector of a Separated Sector Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper E06, pp. 241-244. 
[n]	C.-H. Chang et al., “Design of an In Archromatic Superconducting Wiggler at NSRRC”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF052, pp. 425-427. 
[n]	D. J. Harding et al., “Magnetic Field Measurements of the Initial Fermilab Main Injector Production Dipoles”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP07, pp. 1340-1342. 
[n]	T.-C. Fan, C.-S. Hwang, and F.-Y. Lin, “Pulsed-wire Method of Field Measurement on Short Elliptically Polarized Undulator”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF053, pp. 428-430. 
[n]	W. R. Huang et al., “Demonstration of an All-Optically Driven Sub-keV THz Gun”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 503-505. doi:10.18429/JACoW-IPAC2017-MOPIK004
[n]	D. J. Harding et al., “Magnetic Field Measurements of the Initial Fermilab Main Injector Production Quadrupoles”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP06, pp. 1337-1339. 
[n]	W. Braeutigam, H. G. Boege, H. Beuscher, and R. Brings, “Upgrade JULIC as Injector for COSY-JUelich”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 317-320. 
[n]	H. Yu et al., “Studies on Higher Order Modes Damper for the 3rd Harmonic Superconducting”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA050, pp. 2600-2602. 
[n]	M. Pari, M. A. Fraser, B. Goddard, V. Kain, L. S. Stoel, and F. M. Velotti, “Model and Measurements of CERN-SPS Slow Extraction Spill Re-Shaping - the Burst Mode Slow Extraction”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2406-2409. doi:10.18429/JACoW-IPAC2019-WEPMP035
[n]	D. Dinev, “ORBIT - 3.0 - A Computer Code for Simulation and Correction of the Closed Orbit and First Turn in Synchrotrons”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP2A18, pp. 1369-1371. 
[n]	O. Holme, D. R. S. Di Calafiori, G. Dissertori, L. Djambazov, W. Lustermann, and S. Zelepoukine, “Re-integration and Consolidation of the Detector Control System for the Compact Muon Solenoid Electromagnetic Calorimeter”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC035, pp. 154-157. 
[n]	H.-H. Chen et al., “Design of Mechanical Structure and Cryostat for IASW Superconducting Wiggler at NSRRC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN091, pp. 374-376. 
[n]	P. F. Meads and F. B. Selph, “Extraction and Transfer of High-Quality Beams from Synchrotrons of the FOOFDOD Type with Application to the Omnitron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 242-246. 
[n]	M. Frey, P. H?â, H. Klingbeil, D. Domont-Yankulova, K. Gross, and J. Harzheim, “Prototype Results of the ESR Barrier-Bucket System”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4133-4135. doi:10.18429/JACoW-IPAC2017-THPIK015
[n]	O. Holme, J. A. R. Arroyo Garcia, P. Golonka, M. Gonzalez-Berges, and H. Milcent, “Integrating Controls Frameworks: Control Systems for NA62 LAV Detector Test Beams”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN020, pp. 285-288. 
[n]	D. Dinev, V. Anguelov, V. Mikhailov, and S. Tzenov, “Charge Exchange Injection of Heavy Ions In Synchrotrons”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1222-1225. 
[n]	I. Reyzl and S. Schreiber, “Luminosity Issues for the e-e- Option of the TESLA Linear Collider”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP3B12, pp. 498-500. 
[n]	W. Schulte and H. L. Hagedoorn, “On the Theory of the Coupling Between Radial Oscillations and HF Phase and Energy of Particles in Cyclotrons”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-25, pp. 320-323. 
[n]	H. Klingbeil et al., “Status of the SIS100 RF Systems”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4136-4138. doi:10.18429/JACoW-IPAC2017-THPIK016
[n]	A. O. Sidorin et al., “Injector Complex of the NICA Facility”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA015, pp. 71-73. 
[n]	H. Beuscher, “Ion Sources for Proton Inection into COSY”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 999-1002. 
[n]	J. Linz, J. Reich, and P. Wucherer, “Modification of the Centre Region for Better Beam Quality at JULIC”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-15, pp. 279-282. 
[n]	M. A. Fuka et al., “The Argonne Beamline-B Telescope Control System: A Study of Adaptability”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 652-655. 
[n]	O. Holme, D. R. S. Di Calafiori, G. Dissertori, W. Lustermann, and S. Zelepoukine, “The Evolution of the Control System for the Electromagnetic Calorimeter of the Compact Muon Solenoid Experiment at the Large Hadron Collider”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS003, pp. 319-322. 
[n]	H. S. Marks et al., “Improvement of a Wiggler by Single Axis Magnetic Measurement, Virtual Synthesis, and Relocation of Magnets”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC08, pp. 513-516. 
[n]	G. Bachy, C. Hauviller, R. Messerli, and M. Mottier, “Computer-Aided Engineering in High Energy Physics”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1146-1149. 
[n]	K. P. Harrig, V. P. Nagaslaev, E. Prebys, and S. J. Werkema, “Simulation of Bunch Formation for the Mu2e Experiment”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2180-2182. doi:10.18429/JACoW-IPAC2022-WEPOTK053
[n]	E. O. Ballard, E. A. Meyer, K. B. Riepe, H. L. Rutkowski, R. B. Shurter, and F. W. Van Haaften, “Design Status of Heavy Ion Injector Program”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1788-1791. 
[n]	M. Mottier, “From MAD to CAD:  Automatic Production of Accelerator Layouts”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1963-1966. 
[n]	O. Holme, D. R. S. Di Calafiori, G. Dissertori, L. Djambazov, W. Lustermann, and S. Zelepoukine, “Improving Code Quality of the Compact Muon Solenoid Electromagnetic Calorimeter Control Software to Increase System Maintainability”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC088, pp. 306-309. 
[n]	N. N. Agapov et al., “Rapid Cycling Superconducting Booster Synchrotron”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3A17, pp. 560-562. 
[n]	M. Mehler, H. Klingbeil, M. Kumm, U. Laier, and K.-P. Ningel, “The Damping of Longitudinal Quadrupole Oscillations at GSI”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP079, pp. 2195-2197. 
[n]	T. Hakulinen, P. Ninin, F. Valentini, J. Gonzalez, and C. Salatko-Petryszcze, “CERN Safety System Monitoring - SSM”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU030, pp. 1134-1137. 
[n]	J. Ding, D. L. Hall, and M. Liepe, “Simulations of RF Field-induced Thermal Feedback in Niobium and Nb3Sn Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 920-924. doi:10.18429/JACoW-SRF2017-THPB079
[n]	S. M. Qaim et al., “Production of Longer-Lived Positron Emitters 73Se, 82mRb and 124I”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper K-03, pp. 541-544. 
[n]	D. Dinev, “Kinetic Treatment of the Heavy Ion Charge Exchange Injection”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B02, pp. 1480-1482. 
[n]	P.-J. Wen, Y.-C. Lin, S.-Y. Lin, and M.-H. Chang, “Measurement of ozone concentration at the BL-02A beamline hutch in the Taiwan photon source for ensuring personnel safety”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3758-3760. doi:10.18429/JACoW-IPAC2024-THPS14
[n]	J. Shi, H. Chen, D. Li, C.-X. Tang, and S. Zheng, “Experiment on a Cold Test Model of a 2-Cell SC Deflecting Cavity for ALS at LBNL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN054, pp. 3348-3350. 
[n]	M. Ferrario et al., “Recent Results at the SPARCLAB Facility”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPP017, pp. 2758-2760. 
[n]	E. A. Nanni et al., “Measurements of Transmitted Electron Beam Extinction through Si Crystal Membranes”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1611-1614. doi:10.18429/JACoW-IPAC2016-TUPMY030
[n]	Yu. A. Budanov, O. K. Belyaev, A. Maltsev, and I. A. Zvonarev, “Acceleration of Heavy Ions in Space Periodic Quadrupole RF Focusing Structure”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB009, pp. 190-192. 
[n]	R. G. Farber, S. J. Sibener, S. A. Willson, R. G. Hennig, and A. C. Hire, “Visualization of Sn Adsorption Behavior and Thermally Driven Diffusion Pathways on (3?ù1)-O Nb(100)”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper THPFDV007, pp.. 
[n]	M. Knott, A. Brescia, and A. Valente, “OMNIBUS - A Multi-Programming Executive System for the Zero Gradient Synchrotron Control Computer”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 875-880. 
[n]	Y. K. Batygin, F. E. Shelley, and H. A. Watkins, “Time-of-Flight, Beam-Energy Measurement of the LANSCE 805-MHz Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1075-1077. doi:10.18429/JACoW-IPAC2018-TUPAL033
[n]	A. Young and L. E. Eaton, “RF System Specifications for a Linear Accelerator”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-29, pp. 121-123. 
[n]	A. H. Regan, P. Balleyguier, and C. D. Ziomek, “LEDA LLRF Control System Characterization”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4075, pp. 944-946. 
[n]	C. G. Li, J. H. Li, and S. Zheng, “The Electro-magnetic Field Simulation and Cavity Design of Ridgetron for High Power Electron Irradiation Accelerator”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 58-60. doi:10.18429/JACoW-ICAP2015-TUDWC1
[n]	F.-Y. Lin, C.-H. Chang, H.-H. Chen, T.-C. Fan, M.-H. Huang, and C.-S. Hwang, “Auto-filling Cryogenic System for Superconducting Wiggler”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF054, pp. 1726-1728. 
[n]	N. M. Gelfand, “Tune Drifts on the Tevatron Front Porch”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS017, pp. 1691-1693. 
[n]	H. Damerau et al., “Longitudinal Coupled-Bunch Instabilities in the CERN PS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN069, pp. 4180-4182. 
[n]	J. C. Jan, C.-H. Chang, J. W. Chen, T.-C. Fan, C.-S. Hwang, and F.-Y. Lin, “Design of the Precise Unit for the Rotating Coil Measurement System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN095, pp. 386-388. 
[n]	H. A. Watkins, D. Baros, D. Martinez, L. Rybarcyk, J. D. Sedillo, and R. A. Valicenti, “Upgrades to the LANSCE Isotope Production Facilities Beam Diagnostics”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 690-693. doi:10.18429/JACoW-IBIC2016-WEPG31
[n]	N. M. Gelfand, “Amplitude Dependence of the Tune Shift”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1014-1017. 
[n]	S. A. Willson, R. G. Farber, and S. J. Sibener, “Investigating the Effect of Sn Vapor Deposition Parameters on Nb-Sn-O Coordination on a Highly-Ordered Oxidized Nb(100) Substrate”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper SUPFDV005, pp.. 
[n]	R. Fedele and V. I. Man, “Quantum-like Corrections and Tomography in Beam Physics”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP01D, pp. 1268-1270. 
[n]	M. M. Kelley, T. Arias, and N. Sitaraman, “Ab Initio Theory of the Impact of Grain Boundaries on the Superconducting Properties of Nb3Sn”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 62. doi:10.18429/JACoW-SRF2021-SUPFDV002
[n]	R. Fedele, F. Galluccio, V. I. Man, and G. Miele, “Phase Space Description of Particle Beam Dynamics in the Thermal Wave Model”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1365-1368. 
[n]	J. Hill, “Spectrum Signal Processing Capabilities for EPICS”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP709, pp. XX-XX. 
[n]	G. Huang et al., “Updating the Longitudinal Coupling Impedance Measurement Platform for BEPC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16055, pp. XX-XX. 
[n]	N. M. Gelfand, R. Johnson, and P. Zhang, “Measurements of beta in the TEVATRON and Comparisons with Calculations”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1427-1429. 
[n]	I. Reyzl, “Stabilization of Beam Interaction in the TESLA Linear Collider”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEOAF203, pp. 315-317. 
[n]	M. M. Kelley et al., “A Three-Fluid Model of Dissipation at Surfaces in Superconducting Radiofrequency Cavities”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 361-368. doi:10.18429/JACoW-SRF2023-TUIBA01
[n]	L. Shpani et al., “Study of Chemical Treatments to Optimize Niobium-3 Tin Growth in the Nucleation Phase”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1295-1298. doi:10.18429/JACoW-IPAC2022-TUPOTK036
[n]	J. I. M. Botman, H. L. Hagedoorn, J. Reich, and P. Wucherer, “Analytical Treatment of Ion Inflectors”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper G-12, pp. 263-266. 
[n]	G. O. Bolme et al., “Commissioning of the First Drift Tube Linac Module in the Ground Test Accelerator”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1669-1672. 
[n]	N. Sitaraman et al., “New Recipes to Optimize the Niobium Oxide Surface From First-Principles Calculations”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 426. doi:10.18429/JACoW-SRF2021-TUPFDV010
[n]	G. Thomas, D. Davids, and O. Holme, “CAN Over Ethernet Gateways: A Convenient and Flexible Solution to Access Low Level Control Devices”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 359-362. doi:10.18429/JACoW-ICALEPCS2015-MOPGF120
[n]	Yu. A. Budanov, O. K. Belyaev, and I. A. Zvonarev, “Distinctions of RF Parameters Tuning for Acceleration Period of Structure with Spatially Periodic RFQ Focusing”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 298-300. doi:10.18429/JACoW-RUPAC2018-WEPSB09
[n]	M. Zhong, C.-X. Tang, and S. Zheng, “The Design of a 5 MeV Accelerator Based on Multipactor Electron Gun”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD041, pp. 1520-1522. 
[n]	J. Y. Zhai, C.-X. Tang, and S. Zheng, “Multipactor Electron Gun with CVD Diamond Cathodes”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH174, pp. 3203-3205. 
[n]	C. J. Thompson et al., “High Temperature Persistence and Interatomic Forces of Nb(100)-(3x1)-O Shown by High Resolution Helium Diffraction, Inelastic Time-of-Flight Measurements, and Density Functional Theory Calculations”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper SUPFDV004, pp.. 
[n]	S.-Y. Lin, P.-J. Wen, and C.-C. Liu, “Information display board system to enhance safety management at the National Synchrotron Radiation Research Center”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3701-3703. doi:10.18429/JACoW-IPAC2024-THPR82
[n]	T.-C. Fan, C.-H. Chang, C.-S. Fann, C.-S. Hwang, and F.-Y. Lin, “Magnetic Field Measurement and Fine-tuning of Kickers”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH186, pp. 3236-3238. 
[n]	D. Baros, J. D. Sedillo, and H. A. Watkins, “Bridging the Gap; Updating LANSCE Digitizers”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 822-824. doi:10.18429/JACoW-IBIC2016-WEPG74
[n]	R. C. McCrady, J. D. Gilpatrick, and H. A. Watkins, “Beam Position and Phase Monitors for the LANSCE Linac”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG016, pp. 59-61. 
[n]	D. Dinev, “Nonlinear Dynamics in Nuclotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP06L, pp. 885-887. 
[n]	K. Li et al., “A Project of Tandem Accelerator Mass Spectrometry Facility at Peking University”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1471-1474. 
[n]	H. S. Marks et al., “Narrow Linewidth, Chirp-Control and Radiation Extraction Optimization in an Electrostatic Accelerator FEL Oscillator”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP064, pp. 509-511. 
[n]	P. Clout, S. Bair, A. Conley, R. Ford, M. Fuka, and N. Greene, “The Proton Storage Ring Control System”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2305-2308. 
[n]	H. Carter, G. Romanov, T. Arkan, N. Khabiboulline, and G. Linder, “Measurements of High Order Modes in High Phase Advance Damped Detuned Accelerating Structure for NLC”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP83, pp. 791-793. 
[n]	I. Zychor, “Applications of the Monte Carlo Code for Radiation Transport Simulation for Use in Radiotherapy”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2622-2625. 
[n]	M. Holl, P. Fromme, R. Kaindl, S. Teitelbaum, and W. Graves, “CXFEL labs”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPS47, unpublished. 
[n]	H. A. Watkins, W. C. Barkley, C. D. Hatch, D. Martinez, D. Rai, and E. I. Simakov, “Safety Considerations for Shield Door Control Systems”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 59-62. doi:10.18429/JACoW-IBIC2023-MOP011
[n]	R. Fedele and H. Schamel, “Kinetic Theory of Solitary Waves on Coasting Beams in Synchrotrons and Storage Rings”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP4B01, pp. 1558-1560. 
[n]	N. M. Gelfand and N. V. Mokhov, “2 x 2 TeV μ+μ- Collider: Lattice and Accelerator-Detector Interface Study”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAB19, pp. 787-789. 
[n]	Y.-C. Lin, P.-J. Wen, C.-R. Chen, and A.-Y. Chen, “Assessment of the ratios of radiation sources and total electron loss at the injection section of the Taiwan Photon Source facility and total electron loss by using neutron measurements”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3359-3361. doi:10.18429/JACoW-IPAC2024-THPG43
[n]	J. W. Sim et al., “A Relational Database for Magnets and Measurement Systems at the Fermilab Magnet Test Facility”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPB05, pp. 2282-2284. 
[n]	M. Odera and M. Hemmi, “Accelerating Structure with Chain-Like Electrode Configuration”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0009, pp. 346-348. 
[n]	J. I. M. Botman, H. L. Hagedoorn, and R. F. Kruis, “Extraction Efficiency Optimization for the Eindhoven AVF Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-30, pp. 489-491. 
[n]	D. Dinev, “Magnet Sorting Algorithms”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP045G, pp. 1374-1376. 
[n]	R. Fedele, S. de Martino, and S. de Siena, “Coherent States in the Longitudinal Dynamics of Electron Beams in Particle Accelerators”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP029G, pp. 1350-1352. 
[n]	I. Reichel, K. Gollwitzer, S. J. Werkema, and M. S. Zisman, “Studies to Increase the Anti-Proton Transmission from the Target to the Debuncher Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE056, pp. 3357-3359. 
[n]	J.-C. Chang, S.-P. Kao, M.-C. Lin, and P.-J. Wen, “Numerical simulation of Helium leakage in the Experimental Hall at TPS”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2601, unpublished. 
[n]	L. Aldea, W. Br?ñutigam, R. Brings, C. Mayer-B?Âricke, J. Reich, and P. Wucherer, “Status of JULIC”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABP-02, pp. 103-106. 
[n]	N. M. Gelfand, “Computation of the TEVATRON Luminosity Using Measured Machine Parameters”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 102-105. 
[n]	J. Gutleber et al., “High-Density Power Converter Real-Time Control for the MedAustron Synchrotron”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC028, pp. 127-130. 
[n]	T. Hakulinen et al., “Towards a Unified General Purpose CAD System at CERN”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT019, pp. 1864-1866. 
[n]	J. Reich, R. Brings, J. Linz, and P. Wucherer, “Beam Quality Improvement at JULIC”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper B-13, pp. 2007-2011. 
[n]	E. Brouzet, R. Cappi, J-L. Gonzalez, W. Pirkl, E. Schulte, and M. Thivent, “A Damper for the /pbar Injection Oscillations in the PS Machine”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2135-2138. 
[n]	Z. Li, Z. Pan, X. Deng, J. Tang, C. Tang, and A. Chao, “Analysis of nonlinear deviation in a generalized longitudinal strong focusing unit”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 751-754. doi:10.18429/JACoW-IPAC2024-MOPS20
[n]	C. Zhang et al., “Imaging the Spatial Modulation of a Relativistic Electron Beam”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 480-482. doi:10.18429/JACoW-IPAC2017-MOPAB150
[n]	Z. Li, X. Deng, Z. Pan, C. Tang, and A. Chao, “Generalized longitudinal strong focusing in a storage ring for coherent EUV radiation”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1134-1136. doi:10.18429/JACoW-IPAC2023-MOPM065
[n]	I. Reyzl, “Simulation of Feedback for Orbit Correction”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP043L, pp. 1887-1889. 
[n]	K. Gollwitzer, “Run II Luminosity Progress”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEZAKI01, pp. 1922-1926. 
[n]	X. Deng, “Laser-electron phase-locking in a steady-state microbunching storage ring”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPM035, unpublished. 
[n]	C. D. Ziomek, “Adaptive Feedforward in the LANL RF Control System”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-28, pp. 683-685. 
[n]	L. Tsai, T.-C. Fan, S. Y. Perng, and D.-J. Wang, “Precise Positioning of Magnetic Field Centers of Quadrupole Magnets on the Girder”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA081, pp. 749-751. 
[n]	R. Fedele, V. I. Man, G. Miele, and S. de Nicola, “Evolution of an Off-Axis Coherent State for Particle Beams in the Presence of Small Aberrations”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP030G, pp. 1353-1355. 
[n]	H. S. Marks et al., “Performance and Parameters of a Novel Talbot Effect Confocal Resonator for mm-wave FEL”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC07, pp. 511-512. 
[n]	P. F. Meads, “On the Multiturn Injection of High-Power Beams into an Accumulator Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2767-2769. 
[n]	L. Tsai, T.-C. Fan, C.-S. Hwang, C. J. Lin, S. Y. Perng, and D.-J. Wang, “Multiple Quadrupole Magnetic Center Alignment on the Girder”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN100, pp. 395-397. 
[n]	Z. Sun, M. Liepe, T. E. Oseroff, and X. Deng, “Characterization of Atomic-Layer-Deposited NbTiN and NbTiN/AlN Films for SIS Multilayer Structures”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 662. doi:10.18429/JACoW-SRF2021-WEPTEV012
[n]	V. P. Nagaslaev, K. Gollwitzer, V. A. Lebedev, V. Sajaev, and A. Valishev, “Measurement and Optimization of the Lattice Functions in the Debuncher Ring at Fermilab”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH057, pp. 2050-2052. 
[n]	A. Kruschinski et al., “Exploring the necessary conditions for steady-state microbunching at the Metrology Light Source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 464-467. doi:10.18429/JACoW-IPAC2023-MOPA176
[n]	J. H. Li, Z. Li, and S. Zheng, “The Simulation of the Room Temperature Cross-bar H Type Drift Tube Linac”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 93-96. doi:10.18429/JACoW-ICAP2015-WEP14
[n]	H. L. Hagedoorn and W. M. Schulte, “Accelerated Particles in an AVF Cyclotron with a One or a Two Dee System”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-06, pp. 2329-2333. 
[n]	J. Reich, H. Beuscher, R. K. Bhandari, J. I. M. Botman, and H. L. Hagedoorn, “Partial Beam Decorrelation of Sources Providing Ion Out of Axial Magnetic Fields”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 833-836. 
[n]	R. Gebel, R. Brings, O. Felden, R. Maier, S. Mey, and D. Prasuhn, “20 Years of JULIC Operation as COSY's Injector Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT003, pp. 34-36. 
[n]	P. S. Martin, R. Baiod, D. J. Harding, J. F. Ostiguy, and A. D. Russell, “Modifications to the Excitation Characteristics of Fermilab Main Injector Dipoles by Machining”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P029, pp. 3278-3279. 
[n]	C. Delamare et al., “The CEDAR Project”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP23H, pp. 2330-2332. 
[n]	B. S. Sian, G. Burt, O. B. Malyshev, H. S. Marks, D. J. Seal, and R. Valizadeh, “Split Thin Film SRF 6 GHz Cavities”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 814-817. doi:10.18429/JACoW-LINAC2022-THPOGE09
[n]	R. Fedele, L. Palumbo, and V. G. Vaccaro, “A Novel Approach to the Nonlinear Longitudinal Dynamics in Particle Accelerators”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 762-765. 
[n]	B. Autin, T. D, V. Ducas, M. Martini, and E. Wildner, “Analytic Lattice Design with 	extit{BeamOptics}”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7B008, pp. 1362-1364. 
[n]	W. Graves et al., “Results from CXLS commissioning”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 557-562. doi:10.18429/JACoW-LINAC2024-WEYA004
[n]	J. Belleman, V. Chohan, J. L. Gonzalez, S. Johnstone, E. Schulte, and E. Thivent, “Measurement of the Mean Radial Position of a Lead Ion Beam in the CERN PS”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP021L, pp. 1603-1605. 
[n]	A. Baartman and D. Kaltchev, “Short Quadrupole Parametrization”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN005, pp. 3229-3231. 
[n]	M. Pieck, C. D. Hatch, H. A. Watkins, and E. E. Westbrook, “Ongoing Improvements to the Instrumentation and Control System at LANSCE”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 979-985. doi:10.18429/JACoW-ICALEPCS2023-WE2BCO03
[n]	P. F. Meads and G. Wuestefeld, “An FFAG Compressor and Accelerator Ring Studied for the German Spallation Neutron Source”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2697-2700. 
[n]	D. J. Seal et al., “RF Characterisation of Bulk Niobium and Thin Film Coated Planar Samples at 7.8 GHz”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 818-821. doi:10.18429/JACoW-LINAC2022-THPOGE10
[n]	Yu. A. Budanov et al., “DEVELOPMENT OF LINEAR ACCELERATORS AS INJECTORS FOR MEDICAL ACCELERATORS IN IHEP-PROTVINO”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper THBPH17, pp. XX-XX. 
[n]	K. Whitham, J. Manca, E. Gower, J. Hall, M. Curtin, and P. Metty, “Acceptance Test Performance of the Rocketdyne Radio Frequency Power System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1244-1247. 
[n]	C.-H. Chang et al., “In-Achromatic Superconducting Wiggler in Taiwan Light Source: Installation and Test Results”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS139, pp. 3613-3615. 
[n]	S. R. Koscielniak and A. Baartman, “Analysis of Rapid Betatron Resonance Crossing”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT052, pp. 3206-3208. 
[n]	A. Baartman and D. Kaltchev, “Runge-Kutta DA Integrator in Mathematica Language”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN004, pp. 3226-3228. 
[n]	Z. Sun, Z. Baraissov, M. Liepe, D. A. Muller, T. E. Oseroff, and M. O. Thompson, “Materials Design for Superconducting RF Cavities: Electroplating Sn, Zr, and Au onto Nb and and Chemical Vapor Deposition”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 401-404. doi:10.18429/JACoW-SRF2023-TUPTB006
[n]	R.-D. Kohaupt and I. Reyzl, “Fast Feedback Systems for Orbit Correction in the TESLA Linear Collider”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA41, pp. 1171-1173. 
[n]	A. Klein, A. Abramovich, D. Borodin, A. Friedman, and H. S. Marks, “Measurement of the Output Power in Millimeter Wave Free Electron Laser using the Electro Optic Sampling Method”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP017, pp. 50-52. 
[n]	Y.-C. Du, Q. Du, W.-H. Huang, Y. Lin, C.-X. Tang, and S. Zheng, “Preliminary Experiment of the Thomson Scattering X-ray Source at Tsinghua University”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS044, pp. 3386-3388. 
[n]	D. J. Seal et al., “First RF Measurements of Planar SRF Thin Films with a High Throughput Test Facility at Daresbury Laboratory”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1283-1286. doi:10.18429/JACoW-IPAC2022-TUPOTK033
[n]	B. A. Frolov and Yu. A. Budanov, “Brightness Increase of a Carbon Ion Beam in Accelerator I-100 Injection System”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper MOPSA31, unpublished. 
[n]	H. S. Marks et al., “Saturation Dynamics, Fine Spectrum, and Chirp Control in a CW FEL Oscillator”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 580-582. doi:10.18429/JACoW-FEL2015-WEB04
[n]	Z. Liu, X. Deng, and L. Yan, “Unifying coherent synchrotron radiation wakefield and classical radiation reaction”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 825-827. doi:10.18429/JACoW-IPAC2024-MOPS47
[n]	P.-J. Wen, Y.-C. Lin, S.-Y. Lin, and M.-H. Chang, “Electrical fire safety assessment of the synchrotron accelerator experimental station in NSRRC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3704-3706. doi:10.18429/JACoW-IPAC2024-THPR83
[n]	V. V. Kobets et al., “HEAVY ION INJECTOR FOR NICA/MPD PROJECT”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUAPH04, pp. XX-XX. 
[n]	J. Gonzalez, S. Johnston, and E. Schulte, “Fast Q-Measurement for the PS by FFT Analysis”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1734-1737. 
[n]	H. L. Hagedoorn and W. M. Schulte, “The Definition and the Use of the Central Position Phase in Cyclotrons”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-22, pp. 2388-2391. 
[n]	C. M. Bhat, P. S. Martin, and A. D. Russell, “Design of the MI40 Beam-Abort Dump”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAR02, pp. 1903-1905. 
[n]	Z. Sun et al., “Surface Roughness Reduction of Nb?Sn Thin Films via Laser Annealing for Superconducting Radio-Frequency Cavities”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2283-2285. doi:10.18429/JACoW-IPAC2021-TUPAB338
[n]	M. Pieck, C. D. Hatch, J. O. Hill, H. A. Watkins, and E. E. Westbrook, “LANSCE Control System's 50th Anniversary”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 482-485. doi:10.18429/JACoW-NAPAC2022-TUPA62
[n]	C. J. A. Corsten, H. L. Hagedoorn, and W. M. Schulte, “A Method to Obtain Single Turn Extraction for a Large Phase Width in Cyclotrons”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-23, pp. 2392-2395. 
[n]	H. Beuscher, H.-G. Mathews, C. Mayer-B?Âricke, and J. Reich, “The ECR-Source for the Project ISIS at JULIC”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper DP-04, pp. 285-287. 
[n]	S. K. Hoeffgen et al., “Past, Present and Future Activities for Radiation Effects Testing at JULIC/COSY”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT030, pp. 88-90. 
[n]	A. Will et al., “Beam Impact Experiment of 440GeV/p Protons on Superconducting Wires and Tapes in a Cryogenic Environment”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4264-4267. doi:10.18429/JACoW-IPAC2019-THPTS066
[n]	H. L. Hagedoorn, “Invited Paper: Analytical Models for Cyclotron Orbits”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper G01, pp. 271-278. 
[n]	V. Anguelov and D. Dinev, “Simulations of the Multiturn Injection into Nuclotron Booster”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP062G, pp. 2417-2419. 
[n]	Y. Yin, E. Schulte, and T. Ekelöf, “Recovery of CTF Beam Signals from a Strong Wakefield Background”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPC11, pp. 2622-2624. 
[n]	Z. Sun et al., “Fast Sn-Ion Transport on Nb Surface for Generating NbxSn Thin Films and XPS Depth Profiling”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 727-730. doi:10.18429/JACoW-NAPAC2019-WEPLM60
[n]	P. N. Clout, “The Influence of Industrial Applications on a Control System Toolbox”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 287-290. doi:10.18429/JACoW-ICALEPCS1991-S07IC05
[n]	A. O. Sidorin et al., “Heavy Ion Injector for NICA/MPD Project”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MOP027, pp. 121-123. 
[n]	Z.-K. Liu, H.-C. Chen, M.-S. Chiu, S.-J. Huang, C. Wang, and M.-S. Yeh, “Application of Bayesian optimization for the TLS booster extraction”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2740-2742. doi:10.18429/JACoW-IPAC2025-THPM026
[n]	D. R. S. Di Calafiori et al., “The CMS ECAL Control and Safety Systems Upgrades During the CERN LHC Long Shutdown 2”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1176. doi:10.18429/JACoW-ICALEPCS2019-WEPHA041
[n]	O. Kamigaito et al., “Acceleration Test of the Folded-Coaxial RFQ Linac for the RILAC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8B007, pp. 941-943. 
[n]	N. L. Leicester et al., “Development and Testing of Split 6 GHz Cavities With Niobium Coatings”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 51-55. doi:10.18429/JACoW-SRF2023-MOPMB001
[n]	S.-P. Kao, Y.-C. Lin, and P.-J. Wen, “Cryogenic oxygen deficiency hazard assessment at the National Synchrotron Radiation Research Center”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4073-4076. doi:10.18429/JACoW-IPAC2023-THPA052
[n]	X. Deng, “Statistical Parameter Fluctuation of Random Processes”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA089, unpublished. 
[n]	P. F. Meads, “New Methods for Multiturn Injection into Synchrotrons”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 401-403. 
[n]	P.-J. Wen, S.-P. Kao, Y.-C. Lin, S.-Y. Lin, and M.-H. Chang, “Respiratory protective equipment fit tests for researchers at the National Synchrotron Radiation Research Center”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5134-5137. doi:10.18429/JACoW-IPAC2023-THPM116

For LaTeX

Use Complete Form

For BibTeX

References

Back to search