Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Kurokawa, “Status of TRISTAN-II Project”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2004-2007.
[n] S. A. Pande, C. Christou, and P. Gu, “Simulation of Cavity Conditioning for the Diamond SCRF Cavity”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2509-2511. doi:10.18429/JACoW-IPAC2018-WEPMF062
[n] A. Koschik et al., “PSI Gantry 3: Integration of a New Gantry into an Existing Proton Therapy Facility”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1927-1929. doi:10.18429/JACoW-IPAC2016-TUPOY014
[n] G. S. Dobbing and A. Wolski, “Instability Threshold Calculations for DIAMOND”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7B03, pp. 1116-1118.
[n] N. Hubert, “Overview of Standards for Beam Instrumentation and Control”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3139-3144. doi:10.18429/JACoW-IPAC2016-THXA01
[n] J. C. Biasci, J.-M. Filhol, L. Hardy, J. Jacob, E. Plouviez, and U. Weinrich, “Recent Operation Changes at the ESRF”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4B09, pp. 717-719.
[n] S. A. Pande and C. Christou, “Optimization of Window Position on Diamond SCRF Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2592-2594. doi:10.18429/JACoW-IPAC2014-WEPRI049
[n] R. Bazrafshan, M. Fakhari, F. X. Kaernter, N. H. Matlis, and T. Rohwer, “Design of a Compact 180-Degree Single-Shot Energy Spectrometer Based on a Halbach Dipole Magnet”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2564-2566. doi:10.18429/JACoW-IPAC2022-THPOPT004
[n] I. Romera et al., “Evolution and Perspectives of Second Generation Magnet Interlock Systems at CERN”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4192-4195. doi:10.18429/JACoW-IPAC2016-THPOY042
[n] J. L. Belmont and J. L. Pabot, “Study of Axial Injection for the Grenoble Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper C-009, pp. XX-XX.
[n] M. D. Hildreth et al., “The Straightness Monitor System at ATF2”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE100, pp. 1218-1220.
[n] M. Malard, S. Gustafsson, L. Hablot, J. P. Schapira, and A. Serafini, “AGOR Axial Injection, Using a Positive Light Ion Multicusp Source”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F1-04, pp. 182-185.
[n] D. Wollmann, R. Schmidt, J. A. Uythoven, J. Wenninger, and M. Zerlauth, “Commissioning of the Machine Protection Systems of the Large Hadron Collider Following its First Long Shutdown”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4203-4206. doi:10.18429/JACoW-IPAC2016-THPOY045
[n] K. Artoos et al., “Stabilization and Fine Positioning to the Nanometre Level of the CLIC Main Beam Quadrupoles”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUOCMH02, pp. 1274-1276.
[n] J. C. Goldstein, B. D. McVey, B. E. Newnam, and T. F. Wang, “A Single-Pass Free-Electron Laser for Soft X-Rays with Wavelengths
[n] J. Jacob et al., “Test of the SOLEIL Cryomodule Prototype with Beam at ESRF”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper MOP22, pp. 82-85.
[n] N. Marks, J. B. Lyall, and M. W. Poole, “NINA Programmed Quadrupoles”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1586-1589.
[n] F. J. Cullinan, R. Nagaoka, G. Skripka, and P. F. Tavares, “Transverse Coherent Instabilities in Storage Rings with Harmonic Cavities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1061-1064. doi:10.18429/JACoW-IPAC2016-TUOAB03
[n] S. J. Mills, F. M. Nortier, G. F. Steyn, and W. L. Rautenbach, “A Versatile Cooling-Water System for Radioisotope Production Targets in Tandem”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper H-05, pp. 523-526.
[n] M. Kreider, J. Davies, V. Grout, R. Baer, D. H. Beck, and W. W. Terpstra, “New developments on the FAIR Data Master”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO022, pp. 204-206.
[n] H. Kleines and F. Suxdorf, “Application of AS-Interface to a Small Angle Neutron Scattering Experiment”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP004, pp. 85-87.
[n] S. Fukuda et al., “Status of RF Sources in Super-Conducting RF Test Facility (STF) at KEK”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP086, pp. 1032-1034.
[n] M. Haj Tahar, Y. Dutheil, F. Meot, N. Tsoupas, L. Calabretta, and A. Calanna, “Design of the Injection into the 800 MeV/amu High Power Cyclotron”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA05, pp. 183-185.
[n] A.-S. Chauchat, M. Collet, V. Le Flanchec, B. Fritsche, and M. Leukert, “1.6 MW, 144 MHz solid state power amplifier for ELSA electron linac”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper THPB009, unpublished.
[n] W. Goble and E. Marszal, “High Reliability Computing for Control and Safety”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPB008, pp. 279-282.
[n] S. J. Mills, F. M. Nortier, H. A. Smit, G. F. Steyn, and W. L. Rautenbach, “A Multi-Purpose Target Station for Radioisotope Production at Medium Energies”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper H-06, pp. 527-530.
[n] R. G. Eichhorn et al., “Design and Construction of the Main Linac Cryomodule for the Energy Recovery Linac Project at Cornell”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP074, pp. 308-313.
[n] C. Wyss, “Progress of the LEP Energy Upgrade Project”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2016-2019.
[n] K. Yonehara et al., “RF Integration into Helical Magnet for Muon 6-Dimensional Beam Cooling”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP062, pp. 274-276.
[n] W. H. McNeill and R. G. Little, “Effect of Acceleration and Drift Region Configuration upon the Propagation of Intense Electron Beams”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 499-501.
[n] P. Elleaume et al., “Towards the Ultimate Storage Ring-Based Light Source”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUZF101, pp. 83-87.
[n] P. Fernandez Carmona, M. Eichin, M. Grossmann, E. Johansen, A. Mayor, and H. A. Regele, “Reusable Patient Safety System Framework for the Proton Therapy Centre at PSI”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 549-553. doi:10.18429/JACoW-ICALEPCS2015-TUC3O04
[n] S. M. Cooper et al., “International Collaboration for the Development of TwinCAT Motion Control Software for Neutron Instruments”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WEDPL03, pp. XX-XX.
[n] J. A. Clarke and G. S. Dobbing, “Commissioning of the New Multipole Wigglers in the SRS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA17, pp. 2653-2655.
[n] C. H. Kim, “Performance of the ALS Injection System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2036-2039.
[n] A.-S. Chauchat, M. Collet, B. Fritsche, and V. Le Flanchec, “1.6 MW, 144 MHz solid state power amplifier for ELSA electron linac”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7049, unpublished.
[n] S. S. Kurennoy, “3D Beam Dynamics Modeling of MEBT for the New LANSCE RFQ Injector”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1081-1083. doi:10.18429/JACoW-IPAC2018-TUPAL035
[n] H. Kleines and F. Suxdorf, “A Communication Protocol for Motion Control Applications at the JCNS Neutron Instruments”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1277. doi:10.18429/JACoW-ICALEPCS2019-WEPHA080
[n] H. Kleines, “Synchronous Motion with S7-1500 PLCs in Neutron Instruments”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1716-1719. doi:10.18429/JACoW-ICALEPCS2017-THPHA143
[n] M. Borland, “Update on the Argonne Positron Acumulator Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2028-2031.
[n] M. Collet, A.-S. Chauchat, G. Devanz, T. Hamelin, V. Le Flanchec, and O. Piquet, “RF system upgrade of ELSA electron linac at CEA”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2086, unpublished.
[n] A. Pires, “Optimization of ELSA electron beam transport for its inverse Compton scattering X-ray source”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPG75, unpublished.
[n] D. Tronc, “Compact Protontherapy Unit Predesign”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1768-1771.
[n] A. Faus-Golfe and J. Le Duff, “A Versatile Lattice for a Tau-Charm Factory That Includes a Monochromatization Scheme (Low Emittance) and a Standard Scheme (High Emittance)”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2045-2048.
[n] R. Bazrafshan, M. Fakhari, K. Fl?Âttmann, F. X. Kaernter, N. H. Matlis, and T. Rohwer, “Field Enhanced, Compact S-Band Gun Employing a Pin Cathode”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2567-2569. doi:10.18429/JACoW-IPAC2022-THPOPT005
[n] J. Modeer, “1.3 GeV Electron Synchrotron”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2034-2036.
[n] D. Wang, J. M. Jowett, R. Bailey, and W. Kalbreier, “Commissioning and Operation of the LEP Pretzel Scheme”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2013-2016.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Kurokawa, “Status of TRISTAN-II Project”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2004-2007.
- S. A. Pande, C. Christou, and P. Gu, “Simulation of Cavity Conditioning for the Diamond SCRF Cavity”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2509-2511.
- A. Koschik et al., “PSI Gantry 3: Integration of a New Gantry into an Existing Proton Therapy Facility”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1927-1929.
- G. S. Dobbing and A. Wolski, “Instability Threshold Calculations for DIAMOND”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP7B03, pp. 1116-1118.
- N. Hubert, “Overview of Standards for Beam Instrumentation and Control”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3139-3144.
- J. C. Biasci, J.-M. Filhol, L. Hardy, J. Jacob, E. Plouviez, and U. Weinrich, “Recent Operation Changes at the ESRF”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP4B09, pp. 717-719.
- S. A. Pande and C. Christou, “Optimization of Window Position on Diamond SCRF Cavities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2592-2594.
- R. Bazrafshan, M. Fakhari, F. X. Kaernter, N. H. Matlis, and T. Rohwer, “Design of a Compact 180-Degree Single-Shot Energy Spectrometer Based on a Halbach Dipole Magnet”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2564-2566.
- I. Romera et al., “Evolution and Perspectives of Second Generation Magnet Interlock Systems at CERN”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4192-4195.
- J. L. Belmont and J. L. Pabot, “Study of Axial Injection for the Grenoble Cyclotron”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper C-009, pp. XX-XX.
- M. D. Hildreth et al., “The Straightness Monitor System at ATF2”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE100, pp. 1218-1220.
- M. Malard, S. Gustafsson, L. Hablot, J. P. Schapira, and A. Serafini, “AGOR Axial Injection, Using a Positive Light Ion Multicusp Source”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F1-04, pp. 182-185.
- D. Wollmann, R. Schmidt, J. A. Uythoven, J. Wenninger, and M. Zerlauth, “Commissioning of the Machine Protection Systems of the Large Hadron Collider Following its First Long Shutdown”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4203-4206.
- K. Artoos et al., “Stabilization and Fine Positioning to the Nanometre Level of the CLIC Main Beam Quadrupoles”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUOCMH02, pp. 1274-1276.
- J. C. Goldstein, B. D. McVey, B. E. Newnam, and T. F. Wang, “A Single-Pass Free-Electron Laser for Soft X-Rays with Wavelengths
- J. Jacob et al., “Test of the SOLEIL Cryomodule Prototype with Beam at ESRF”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper MOP22, pp. 82-85.
- N. Marks, J. B. Lyall, and M. W. Poole, “NINA Programmed Quadrupoles”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1586-1589.
- F. J. Cullinan, R. Nagaoka, G. Skripka, and P. F. Tavares, “Transverse Coherent Instabilities in Storage Rings with Harmonic Cavities”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1061-1064.
- S. J. Mills, F. M. Nortier, G. F. Steyn, and W. L. Rautenbach, “A Versatile Cooling-Water System for Radioisotope Production Targets in Tandem”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper H-05, pp. 523-526.
- M. Kreider, J. Davies, V. Grout, R. Baer, D. H. Beck, and W. W. Terpstra, “New developments on the FAIR Data Master”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FPO022, pp. 204-206.
- H. Kleines and F. Suxdorf, “Application of AS-Interface to a Small Angle Neutron Scattering Experiment”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUP004, pp. 85-87.
- S. Fukuda et al., “Status of RF Sources in Super-Conducting RF Test Facility (STF) at KEK”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP086, pp. 1032-1034.
- M. Haj Tahar, Y. Dutheil, F. Meot, N. Tsoupas, L. Calabretta, and A. Calanna, “Design of the Injection into the 800 MeV/amu High Power Cyclotron”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPBA05, pp. 183-185.
- A.-S. Chauchat, M. Collet, V. Le Flanchec, B. Fritsche, and M. Leukert, “1.6 MW, 144 MHz solid state power amplifier for ELSA electron linac”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper THPB009, unpublished.
- W. Goble and E. Marszal, “High Reliability Computing for Control and Safety”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOPB008, pp. 279-282.
- S. J. Mills, F. M. Nortier, H. A. Smit, G. F. Steyn, and W. L. Rautenbach, “A Multi-Purpose Target Station for Radioisotope Production at Medium Energies”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper H-06, pp. 527-530.
- R. G. Eichhorn et al., “Design and Construction of the Main Linac Cryomodule for the Energy Recovery Linac Project at Cornell”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP074, pp. 308-313.
- C. Wyss, “Progress of the LEP Energy Upgrade Project”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2016-2019.
- K. Yonehara et al., “RF Integration into Helical Magnet for Muon 6-Dimensional Beam Cooling”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP062, pp. 274-276.
- W. H. McNeill and R. G. Little, “Effect of Acceleration and Drift Region Configuration upon the Propagation of Intense Electron Beams”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 499-501.
- P. Elleaume et al., “Towards the Ultimate Storage Ring-Based Light Source”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUZF101, pp. 83-87.
- P. Fernandez Carmona, M. Eichin, M. Grossmann, E. Johansen, A. Mayor, and H. A. Regele, “Reusable Patient Safety System Framework for the Proton Therapy Centre at PSI”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 549-553.
- S. M. Cooper et al., “International Collaboration for the Development of TwinCAT Motion Control Software for Neutron Instruments”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper WEDPL03, pp. XX-XX.
- J. A. Clarke and G. S. Dobbing, “Commissioning of the New Multipole Wigglers in the SRS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA17, pp. 2653-2655.
- C. H. Kim, “Performance of the ALS Injection System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2036-2039.
- A.-S. Chauchat, M. Collet, B. Fritsche, and V. Le Flanchec, “1.6 MW, 144 MHz solid state power amplifier for ELSA electron linac”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7049, this conference.
- S. S. Kurennoy, “3D Beam Dynamics Modeling of MEBT for the New LANSCE RFQ Injector”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1081-1083.
- H. Kleines and F. Suxdorf, “A Communication Protocol for Motion Control Applications at the JCNS Neutron Instruments”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1277.
- H. Kleines, “Synchronous Motion with S7-1500 PLCs in Neutron Instruments”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1716-1719.
- M. Borland, “Update on the Argonne Positron Acumulator Ring”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2028-2031.
- M. Collet, A.-S. Chauchat, G. Devanz, T. Hamelin, V. Le Flanchec, and O. Piquet, “RF system upgrade of ELSA electron linac at CEA”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP2086, this conference.
- A. Pires, “Optimization of ELSA electron beam transport for its inverse Compton scattering X-ray source”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG75, unpublished.
- D. Tronc, “Compact Protontherapy Unit Predesign”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1768-1771.
- A. Faus-Golfe and J. Le Duff, “A Versatile Lattice for a Tau-Charm Factory That Includes a Monochromatization Scheme (Low Emittance) and a Standard Scheme (High Emittance)”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2045-2048.
- R. Bazrafshan, M. Fakhari, K. Fl?Âttmann, F. X. Kaernter, N. H. Matlis, and T. Rohwer, “Field Enhanced, Compact S-Band Gun Employing a Pin Cathode”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2567-2569.
- J. Modeer, “1.3 GeV Electron Synchrotron”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2034-2036.
- D. Wang, J. M. Jowett, R. Bailey, and W. Kalbreier, “Commissioning and Operation of the LEP Pretzel Scheme”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2013-2016.
Back to search