JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. A. Leitner et al., “H$^-$ Ion Source Development for the National Spallation Neutron Source”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W026, pp. 2758-2760. 
[n]	Y. Tang et al., “NSLS Control System Upgrade Status”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1852-1855. 
[n]	S. Lenci, H. Bohlen, A. Mizuhara, B. Stockwell, and E. Wright, “Recent Progress in CW Klystrons at CPI”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE118, pp. 2326-2328. 
[n]	M. Akemoto and S. Takeda, “Development of an X-Band Klystron Modulator with a Pulse-Forming Line and Magnetic Switch”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-28, pp. 374-376. 
[n]	S. A. Gavrilov and A. Feschenko, “Bunch Shape Monitors for Modern Ion Linacs”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 176-178. doi:10.18429/JACoW-IBIC2017-TUPCC12
[n]	J. Buon, J. Jeanjean, F. Le Diberdier, V. Lepeltier, and P. Puzo, “Results of the Orsay Spot Size Monitor for the Final Focus Test Beam”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP059L, pp. 1683-1685. 
[n]	K. C. Harkay et al., “Generation of Short X-Ray Pulses Using Crab Cavities at the Advanced Photon Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOAB009, pp. 668-670. 
[n]	N. Delerue et al., “Bunch Length Measurements Using Coherent Smith-Purcell Radiation With Several Gratings at CLIO”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2239-2242. doi:10.18429/JACoW-IPAC2018-WEPAL034
[n]	W. C. Sellyey and C. G. Parazzoli, “Heating of the LSS Wiggler Beam Tube due to Induced Surface Current”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2769-2772. 
[n]	E.-G. Schweppe, E. Demmel, S. Isagawa, and M. Yoshida, “Stability Improvement of High Power Klystron YK 1303”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1215-1218. 
[n]	J. N. Weaver, “Controls for Operating and Processing the MIT-LNS Linac”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 576-580. 
[n]	T. L. Houck, G. A. Westenskow, J. Haimson, and B. Mecklenburg, “Choppertron II”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ03, pp. 1524-1526. 
[n]	D. Bruhwiler, J. R. Cary, and S. G. Shasharina, “Nonlinear Optimization in the C Beam Optics Code”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6A08, pp. 1071-1073. 
[n]	M. J. Boland, Y. E. Tan, and D. Zhu, “Layout Options for the AXXS Injector and XFEL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1394-1396. doi:10.18429/JACoW-IPAC2015-TUPWA002
[n]	Y. Xiao, C. Feng, H. Sun, and B. Liu, “Feasibility verification of ultrafast FEL generation experimental scheme based on SXFEL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1920-1923. doi:10.18429/JACoW-IPAC2023-TUPL078
[n]	J. L. Muñoz et al., “Multiharmonic Buncher for the Isolde Superconducting Recoil Separator Project”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 321-325. doi:10.18429/JACoW-HB2023-WEC4C2
[n]	D. Einfeld, S. Hermle, E. Huettel, R. Rossmanith, and R. Walther, “The Injection Scheme for the ANKA Storage Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP17F, pp. 2135-2136. 
[n]	F. J. Mumford, P. G. Blaine, and H. N. Jungwirth, “Design of a Vacuum Chamber for the Magnets of a Separated Sector Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-13, pp. 1934-1937. 
[n]	R. J. Wood and M. P. Martinez, “The OPC-Based System at SNS: An EPICS Supplement”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB29, pp. 223-225. 
[n]	J. W. Hurd et al., “Commissioning Plans for SSC Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-53, pp. 462-464. 
[n]	A. J. Clapp, L. Bobb, G. Cook, and P. Karataev, “One Dimensional Beam Position Monitor Prototype using Incoherent Cherenkov Diffraction Radiation”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 94-98. doi:10.18429/JACoW-IBIC2023-MOP032
[n]	P. P. Goryl et al., “Tango Controls RFCs”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 317-321. doi:10.18429/JACoW-ICALEPCS2021-TUBL03
[n]	V. N. Litvinenko and I. Ben-Zvi, “Potential Use of eRHIC's ERL for FELs and Light Sources”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper WEBOS04, pp. XX-XX. 
[n]	G. Brautti, I. Boscolo, R. Coisson, M. Leo, and A. Tepore, “Production and Dynamics of High Intensity Electron Beams”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 286-289. 
[n]	C. D. Striffler et al., “Electron Ring Accelerator Research at the University of Maryland”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4234-4237. 
[n]	W. R. Rawnsley and R. E. Laxdal, “A Beam Current Monitor for the VECC Accelerator”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF27, pp. 275-278. 
[n]	S. U. De Silva, J. R. Delayen, H. Park, P. Berrutti, and N. A. Huque, “Room Temperature Measurements of Higher Order Modes for the SPS Prototype RF-Dipole Crabbing Cavity”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3805-3807. doi:10.18429/JACoW-IPAC2018-THPAL067
[n]	A. Hassanein et al., “The Design of a Liquid Lithium Lens for a Muon Collider”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP48, pp. 3062-3064. 
[n]	R. Brogle, P. Muggli, P. Davis, G. Hairapetian, and C. Joshi, “Studies of Linear and Nonlinear Photoelectric Emission for Advanced Accelerator Applications”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPC20, pp. 1039-1042. 
[n]	W. C. Sellyey and J. D. Gilpatrick, “A Compact Residual Gas Ionization Profile Monitor (RGIPM) System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA122, pp. 2152-2154. 
[n]	L. D. Hansborough et al., “Mechanical Engineering of a 75-keV Proton Injector for the Low Energy Demonstration Accelerator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W020, pp. 2740-2742. 
[n]	M. Champion et al., “Overview of the Spallation Neutron Source Linac Low-Level RF Control System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT057, pp. 3396-3398. 
[n]	D. Shu et al., “Conceptual Design of the Cavity Mechanical System for Cavity-Based X-Ray Free Electron Laser”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 103. doi:10.18429/JACoW-MEDSI2020-TUOA02
[n]	N. Gerasimova, H. Sinn, S. Dziarzhytski, and R. Treusch, “The Photon Beam Loss Monitors as a Part of Equipment Protection System at European XFEL”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP010, pp. 37-40. 
[n]	C. Taylor et al., “Study on Switching from H- to H+ Beam Delivery to the Proton Radiography and Ultra Cold Neutron Facilities at the Los Alamos Neutron Science Center (LANSCE)”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPM050, unpublished. 
[n]	S. S. Chang et al., “Operational Status of the PLS Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP091G, pp. 581-583. 
[n]	Z. Liang et al., “Superconducting β=0.19 half-wave cavity for CiADS”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1738-1740. doi:10.18429/JACoW-IPAC2025-WEPB009
[n]	D. Mihalcea et al., “Field-Emission Electron Source Embedded in a Field-Enhanced Conduction-Cooled Superconducting RF Cavity”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 192-195. doi:10.18429/JACoW-NAPAC2019-MOPLH10
[n]	R. E. Giacone et al., “Simulations of Electron Injection into Plasma Wake Fields by Colliding Laser Pulses Using XOOPIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH149, pp. 4023-4025. 
[n]	C. R. Ader, M. W. McGee, L. E. Nobrega, and E. A. Voirin, “Overview of Fabrication Techniques and Lessons Learned with Accelerator Vacuum Windows”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 51-54. doi:10.18429/JACoW-IPAC2018-MOZGBE4
[n]	K. A. Young et al., “5 MW 805 MHz SNS RF System Experience”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT054, pp. 3280-3282. 
[n]	A. Balkcum et al., “Design and Operation of a High Power L-Band Multiple Beam Klystron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT031, pp. 2170-2172. 
[n]	G. Bellomo and F. Resmini, “A Method for Minimizing Trim Coil Power Requirements in Superconducting Cyclotrons”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper C-12, pp. 2095-2100. 
[n]	Y.-J. Chen et al., “Heavy Ion Fusion Injector Program”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 703-706. 
[n]	S. Lenci and E. Eisen, “Large Scale Production of 805-MHz Pulsed Klystrons for SNS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF076, pp. 1114-1116. 
[n]	A. P. Zhukov, S. Assadi, R. Dickson, V. Gaidash, and J. Pogge, “SNS BLM System Evolution: Detectors, Electronics, and Software”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP038, pp. 4853-4855. 
[n]	P. Horodek, I. N. Meshkov, A. G. Kobets, O. Orlov, and A. A. Sidorin, “Positron Annihilation Spectroscopy at LEPTA Facility”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB32, pp. 231-233. 
[n]	R. F. Welton et al., “The ORNL Helicon H- Ion Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP038, pp. 441-441. 
[n]	W. T. Weng and M. Diwan, “Neutrino Beam Facilities and Projects”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WOAD001, pp. 429-433. 
[n]	T. Hiatt et al., “Cryogenic Testing of the RF Input Waveguide for the CEBAF Upgrade Cryomodule”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH158, pp. 1155-1157. 
[n]	S. Hashimoto, K. Kobayashi, Y. Miyahara, S. Sasaki, T. Shimada, and M. Takao, “Design Study of Quasi-Periodic Undulator”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP056G, pp. 2546-2548. 
[n]	E. B. Blum and J. L. Rothman, “Self Triggered Single Pulse Beam Position Monitor”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2307-2310. 
[n]	G. Bassi, J. A. Ellison, and R. L. Warnock, “Progress on a Vlasov Treatment of Coherent Synchrotron Radiation from Arbitrary Planar Orbits”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT042, pp. 2699-2701. 
[n]	R. M. Lill et al., “Design and Performance of the LCLS Cavity BPM System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN111, pp. 4366-4368. 
[n]	A. Latina et al., “A Compact Inverse Compton Scattering Source Based on X-Band Technology and Cavity-Enhanced High Average Power Ultrafast Lasers”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 44-46. doi:10.18429/JACoW-LINAC2022-MOPOJO09
[n]	F. M?®ot, P. N. Joshi, J. P. Lidestri, M. R. Subramanian, and N. Tsoupas, “Tracking Dynamic Aperture in the iRCMS Hadrontherapy Synchrotron”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2442-2444. doi:10.18429/JACoW-IPAC2022-THPOST005
[n]	P. Grand, “The Physical Design of a 200 - MeV Linac Facility”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 860-867. 
[n]	C. Zhang et al., “A 1-2 GHz stochastic cooling system for antiprotons and rare isotopes”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1740-1743. doi:10.18429/JACoW-IPAC2023-TUPA184
[n]	D. Barlow et al., “Magnetic Design and Measurement of Nonlinear Multipole Magnets for the APT Beam Expander System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P036, pp. 3309-3311. 
[n]	P. E. Gibson, A. V. Aleksandrov, M. M. Champion, G. W. Dodson, J. P. Schubert, and J. Y. Tang, “Resonance Control Cooling System Performance and Developments”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE038, pp. 2541-2543. 
[n]	C.-K. Yang, F.-Y. Lin, H. Chen, H.-H. Chen, and Y.-L. Chu, “Development of a non-linear injection kicker for the TPS storage ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3264-3267. doi:10.18429/JACoW-IPAC2024-THPG08
[n]	A. N. Stillman, “Laser Compton Proton Polarimetry Revisited”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP238, pp. 560-561. 
[n]	R. Losito et al., “The PHIN Photoinjector for the CTF3 Drive Beam”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS059, pp. 2517-2519. 
[n]	P. A. McIntosh et al., “PEP-II RF System Operation and Performance”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF062, pp. 1087-1089. 
[n]	I. Lobach, S. Nagaitsev, E. G. Stern, and T. Zolkin, “McMillan Lens in a System with Space Charge”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3143-3145. doi:10.18429/JACoW-IPAC2018-THPAF071
[n]	A. V. Feschenko, A. A. Men, and P. N. Ostroumov, “A Detector to Measure Longitudinal and Transverse Distributions of a Two Component Ion Beam”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1073-1076. 
[n]	R. D?Âlling and M. Rohrer, “A 4D Emittance Measurement Device for the 870 keV HIPA Injection Line”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 329-333. doi:10.18429/JACoW-HB2018-WEP2PO030
[n]	K. Mahmoudi, M. Akbari, H. Haedar, A. Khaleghi, and S. Mahmoudi, “Study and Design of a High-Performance Computing Infrastructure for Iranian Light Source Facility Based on the Accelerator Physicists and EngineersÔÇÖ Applications Requirements”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3402-3405. doi:10.18429/JACoW-IPAC2021-WEPAB310
[n]	V. A. Moiseev, “The Longitudinal and Transverse Beam Dynamics Simulation in the MMF Storage Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3249-3252. 
[n]	K. Evans and M. Smith, “Experience with the EPICS PV Gateway at the APS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT064, pp. 3621-3623. 
[n]	I. Ander, Z. Korm?íny, P. Kov?ícs, T. Lakatos, and I. Sz??cs, “Renewal and Automation of the ATOMKI MGC-20 Cyclotron”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP7A07, pp. 1844-1846. 
[n]	B. Naranjo et al., “Compton Spectrometer for FACET-II”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4332-4335. doi:10.18429/JACoW-IPAC2021-THPAB269
[n]	E.-S. Kim et al., “Limitation of Beam Current in the PLS Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH121, pp. 1948-1950. 
[n]	A. Luccio, A. Lehrach, J. Niederer, T. Roser, M. Syphers, and N. Tsoupas, “New Capabilities of the Spin Tracking Code SPINK”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP44, pp. 1578-1580. 
[n]	R. M. Thurman-Keup, A. S. Johnson, A. H. Lumpkin, J. C. T. Thangaraj, D. H. Zhang, and W. Blokland, “Initial Characterization of a Commercial Electron Gun for Profiling High Intensity Proton Beams in Project X”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP225, pp. 525-527. 
[n]	J. N. Weaver, J. B. Styles, and P. B. Wilson, “Bench Measurements of the Loss Impedance for PEP Beam Line Components”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3971-3974. 
[n]	A. Radeva, J. M. E. Elyn, F. Locci, T. Oulevey, and M. Vanden Eynden, “Selecting a Linux Operating System for CERN Accelerator Controls”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1475-1479. doi:10.18429/JACoW-ICALEPCS2023-THPDP064
[n]	S. J. Lenci et al., “RF Sources for 3rd & 4th Generation Light Sources”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS63, pp. XX-XX. 
[n]	H. Schlarb, N. Heidbrook, H. Kapitza, F. Ludwig, and N. Nagad, “Precision RF Gun Phase Monitor System for the VUV-FEL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH025, pp. 1052-1054. 
[n]	D. E. Gough, R. L. Cassel, A. R. Donaldson, D. Hutchinson, and T. S. Mattison, “The Timing and Diagnostic Systems of the Kicker Magnet Pulsers for the Stanford Linear Collider”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3168-3171. 
[n]	M. P. McCarthy et al., “Spallation Neutron Source High Power RF Installation and Commissioning Progress”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT061, pp. 3520-3522. 
[n]	B. K. Stillwell et al., “Research and Development on the Storage Ring Vacuum System for the APS Upgrade Project”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 92-95. doi:10.18429/JACoW-NAPAC2016-MOPOB11
[n]	Y. Funahashi et al., “Development of Active Tables for Linear Colliders”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-50, pp. 816-818. 
[n]	Q. Gan, P. Chu, and C. H. Wang, “Study on a New Framework of the Accelerator Application Software Based on Eclipse”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP077, pp. 818-820. 
[n]	G. Westenskow, E. Halaxa, R. P. Hall, and J. Kwan, “Characterization of an RF-Driven Plasma Ion Source for Heavy Ion Fusion”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB007, pp. 3300-3302. 
[n]	D. K. Kalantaryan and Y. L. Martirosyan, “Transfer Matrices for the Coupled Space Charge Dominated Six-dimensional Particle Motion”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT003, pp. 1135-1137. 
[n]	P. Denham, “Experimental demonstration of a single-shot, nondestructive electron  beam diagnostic based on the ionization of a low-density pulsed gas jet”, presented at the IBIC'25, Liverpool, UK, Sep. 2025, paper WECI02, unpublished. 
[n]	L. Felsberger, A. Apollonio, T. Cartier-Michaud, E. Montesinos, J. C. Oliveira, and J. A. Uythoven, “Availability Modeling of the Solid-State Power Amplifiers for the CERN SPS RF Upgrade”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2308-2311. doi:10.18429/JACoW-IPAC2021-TUPAB345
[n]	G. Wang et al., “Path to high current 500 mA at NSLS-II”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPG13, unpublished. 
[n]	I. M. Kapchinskiy et al., “RF Linac for Heavy Ion Fusion Driver”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-29, pp. 318-322. 
[n]	J. M. Cavedon et al., “An Accelerator for Testing Superconducting RF Structures”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 52-54. 
[n]	G. P. Lawrence, T. D. Hayward, and J. A. Jackson, “A Prototype High Current, High Duty Factor Negative Hydrogen Ion Source for LAMPF”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1640-1643. 
[n]	R. Chebab, J. Bonnard, G. Humbert, B. Leblond, and J. L. Saury, “A Multiwire Secondary Emission Profile Monitor for Small Emittance Beams”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1953-1956. 
[n]	T. Y. Chung, C.-H. Chang, A. Y. Chen, Y. W. Chen, J. C. Huang, and J. C. Jan, “Radiation Damage to Undulator Electronics at an Electron Accelerator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4285-4287. doi:10.18429/JACoW-IPAC2019-THPTS073
[n]	C. Biino et al., “First Observation of the Deflection of a 33 TeV Pb Ion Beam in a Bent Silicon Crystal”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P004, pp. 165-167. 
[n]	J. D. Jarvis et al., “Uniformity Conditioning of Diamond Field-Emitter Arrays”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH028, pp. 302-304. 
[n]	S. Sievers et al., “Retreatment of European XFEL Series Cavities at DESY as Part of the Repair of European XFEL Accelerating Modules”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 384-387. doi:10.18429/JACoW-LINAC2018-TUPO028
[n]	D. A. Swenson, F. W. Guy, J. W. Lenz, K. R. Crandall, and J. M. Potter, “Status of the RFD Linac Prototype”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W027, pp. 1099-1101. 
[n]	A. Hofler, D. Bryan, L. Harwood, M. Joyce, and V. Lebedev, “Empirically Determined Response Matrices for On-Line Orbit and Energy Correction at Thomas Jefferson National Accelerator Facility”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH019, pp. 1273-1275. 
[n]	A. Taketani et al., “Development of Un-destructive Inspection System for Large Concrete Infrastructure by using Accelerator Based Compact Neutron Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2262-2264. doi:10.18429/JACoW-IPAC2015-TUPWI009
[n]	C. Andelfinger et al., “Status Report of the Experimental and Theoretical Investigations in the Garching Electron Ring Accelerator”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4172-4177. 
[n]	A. A. Sidorin et al., “Development of Positron Annihilation Spectroscopy at the LEPTA Facility”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 499-501. doi:10.18429/JACoW-RUPAC2016-WEPSB060
[n]	G. von Holtey, “Electron Beam Collimation at LEP Energies”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1252-1255. 
[n]	F. Chambers et al., “Diagnostics and Data Analysis for the ETA-II Linear Induction Accelerator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3085-3088. 
[n]	F. M. Bieniosek, K. Anderson, and K. Fullett, “Requirements for a Beam Sweeping System for the Fermilab Antiproton Source Target”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAR17, pp. 1939-1941. 
[n]	M. D. Woodley, J. Jaeger, A. S. King, and M. J. Lee, “Control of Machine Functions or Transport Systems”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2367-2370. 
[n]	R. D?Âlling and M. Rohrer, “A Secondary Emission Monitor in the SINQ Beam Line for Improved Target Protection”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 334-337. doi:10.18429/JACoW-HB2018-WEP2PO032
[n]	B. Xu, E. Carranza, A. Chen, S. Condamoor, W. J. Corbett, and A. S. Fisher, “Electron Bunch Pattern Monitoring via Single Photon Counting at SPEAR3”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 168-171. doi:10.18429/JACoW-IBIC2017-TUPCC09
[n]	K. F. Johnson et al., “The Single-Beam Funnel Demonstration: Experiment and Simulation”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH441, pp. 701-703. 
[n]	G. S. Nusinovich, V. L. Granatstein, and P. E. Latham, “Some Concepts of Relativistic Gyroamplifiers for Particle Acceleration”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2673-2675. 
[n]	K. H. Kim, S. Allison, T. Straumann, and E. Williams, “Real-Time Performance Improvements and Consideration of Parallel Processing for Beam Synchronous Acquisition (BSA)”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 992-994. doi:10.18429/JACoW-ICALEPCS2015-WEPGF122
[n]	A. M. Meseck, M. Abo-Bakr, and B. Kuske, “The Influence of the Seed Pulse Shape on the Output Performance of the BESSY Multi-stage HGHG-FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOPOS06, pp. XX-XX. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search