Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. W. Wang et al., “R&D of a Super-compact SLED System at SLAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 39-41. doi:10.18429/JACoW-IPAC2016-MOOCA01
[n] I. Hofmann and O. Boine-Frankenheim, “Stochastic Noise Effects in High Current PIC Simulation”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3101-3103. doi:10.18429/JACoW-IPAC2014-THPRO092
[n] H.-W. Glock et al., “Progress of the BESSY VSR Cold String Development and Testing”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1434-1436. doi:10.18429/JACoW-IPAC2019-TUPGW019
[n] F. Blas and R. Garoby, “Design and Operational Results of a One-Turn-Delay Feedback" for Beam Loading Compensation of the CERN PS Ferrite Cavities"”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1398-1401.
[n] H. Sakaki et al., “Design of SPring-8 Linac Control System Using Object Oriented Concept”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA07, pp. 2208-2210.
[n] J. M. Nogiec and K. Trombly-Freytag, “Combining Structured and Unstructured Data In A Configurable Web-based Logbook”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP115, pp. 901-903.
[n] S. Andresen, “Optimizing the PETRA IV Girder by Using Bio-Inspired Structures”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 297-301. doi:10.18429/JACoW-MEDSI2018-THOAMA01
[n] H. Hama et al., “Cherenkov Ring to Observe Longitudinal Phase Space of a Low Energy Electron Beam Extracted from RF Gun”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUCNB03, pp. 79-83.
[n] E. Senes et al., “Transverse Emittance Measurement in the CERN Proton Synchrotron in View of Beam Production for the High-Luminosity LHC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1106-1109. doi:10.18429/JACoW-IPAC2019-MOPTS100
[n] C. M. Bhat et al., “Magnetic Field Measurements of the Main Injector Sextupole Magnets”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P007, pp. 3242-3244.
[n] N. Towne, “Longitudinal Measurements and Simulations of Stretched Bunches in the NSLS VUV Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH150, pp. 3594-3596.
[n] A. Ueda et al., “Design and Fabrication of the Compact-Erl Magnets”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1111-1114. doi:10.18429/JACoW-IPAC2016-TUPMB005
[n] K. Suda et al., “Status Report of the Operation of the RIKEN AVF Cyclotron”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOPA12, pp. 65-67.
[n] D. J. Gibson, G. G. Anderson, C. P. J. Barty, and R. A. Marsh, “Compact X-band Accelerator Controls for a Laser-Compton X-ray Source”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3996-3998. doi:10.18429/JACoW-IPAC2016-THPOW027
[n] N. Higashi et al., “Low Emittance Lattice for PF-AR”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4148-4151. doi:10.18429/JACoW-IPAC2018-THPMF041
[n] R. Chestnut and A. Fisher, “The Bunch Injection Controller for the PEP-II Storage Rings”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper FRBT003, pp. XX-XX.
[n] J. A. Johnstone, V. Kashikhin, N. V. Mokhov, and A. V. Zlobin, “Optics Implications of Implementing Nb3Sn Magnets in the LHC Phase I Upgrade”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP047, pp. 2626-2628.
[n] M. Tanigaki et al., “Current Status of a Carborne Survey System, KURAMA”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCA06, pp. 926-929.
[n] T. Dewitte, W. Meert, E. Van Wolputte, and P. Van Trappen, “Anomaly Detection for CERN Beam Transfer Installations Using Machine Learning”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1067. doi:10.18429/JACoW-ICALEPCS2019-WEMPR010
[n] T. Furukawa et al., “Development of Raster Scanning at NIRS-HIMAC”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper G-04, pp. 370-373.
[n] T. O. Raubenheimer and P. Chen, “Ions in the Linacs of Future Linear Colliders”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-10, pp. 630-632.
[n] E. A. Nanni et al., “Toward High-Power High-Gradient Testing of mm-Wave Standing-Wave Accelerating Structures”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1224-1227. doi:10.18429/JACoW-IPAC2018-TUZGBE4
[n] T. Yoshimoto et al., “Wide-band Induction Acceleration in the KEK Digital Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1893-1895. doi:10.18429/JACoW-IPAC2014-WEOAB02
[n] D. C. Carey, “Violation of Midplane Symmetry in Bending Magnets”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2255-2258.
[n] S. Rajagopalan, “Plasma Focusing of the Final Test Beam”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3555-3558.
[n] M. Ichikawa, H. Fujisawa, Y. Iwashita, Y. Tajima, H. Tongu, and M. Yamada, “Development of Piezoelectric Pulse Gas Valve for Small ECR Ion Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC146, pp. 418-420.
For LaTeX
Use Complete Form
For BibTeX
References
- J. W. Wang et al., “R&D of a Super-compact SLED System at SLAC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 39-41.
- I. Hofmann and O. Boine-Frankenheim, “Stochastic Noise Effects in High Current PIC Simulation”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3101-3103.
- H.-W. Glock et al., “Progress of the BESSY VSR Cold String Development and Testing”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1434-1436.
- F. Blas and R. Garoby, “Design and Operational Results of a One-Turn-Delay Feedback" for Beam Loading Compensation of the CERN PS Ferrite Cavities"”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1398-1401.
- H. Sakaki et al., “Design of SPring-8 Linac Control System Using Object Oriented Concept”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPA07, pp. 2208-2210.
- J. M. Nogiec and K. Trombly-Freytag, “Combining Structured and Unstructured Data In A Configurable Web-based Logbook”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP115, pp. 901-903.
- S. Andresen, “Optimizing the PETRA IV Girder by Using Bio-Inspired Structures”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 297-301.
- H. Hama et al., “Cherenkov Ring to Observe Longitudinal Phase Space of a Low Energy Electron Beam Extracted from RF Gun”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUCNB03, pp. 79-83.
- E. Senes et al., “Transverse Emittance Measurement in the CERN Proton Synchrotron in View of Beam Production for the High-Luminosity LHC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1106-1109.
- C. M. Bhat et al., “Magnetic Field Measurements of the Main Injector Sextupole Magnets”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P007, pp. 3242-3244.
- N. Towne, “Longitudinal Measurements and Simulations of Stretched Bunches in the NSLS VUV Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH150, pp. 3594-3596.
- A. Ueda et al., “Design and Fabrication of the Compact-Erl Magnets”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1111-1114.
- K. Suda et al., “Status Report of the Operation of the RIKEN AVF Cyclotron”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOPA12, pp. 65-67.
- D. J. Gibson, G. G. Anderson, C. P. J. Barty, and R. A. Marsh, “Compact X-band Accelerator Controls for a Laser-Compton X-ray Source”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3996-3998.
- N. Higashi et al., “Low Emittance Lattice for PF-AR”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4148-4151.
- R. Chestnut and A. Fisher, “The Bunch Injection Controller for the PEP-II Storage Rings”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper FRBT003, pp. XX-XX.
- J. A. Johnstone, V. Kashikhin, N. V. Mokhov, and A. V. Zlobin, “Optics Implications of Implementing Nb3Sn Magnets in the LHC Phase I Upgrade”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP047, pp. 2626-2628.
- M. Tanigaki et al., “Current Status of a Carborne Survey System, KURAMA”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOCA06, pp. 926-929.
- T. Dewitte, W. Meert, E. Van Wolputte, and P. Van Trappen, “Anomaly Detection for CERN Beam Transfer Installations Using Machine Learning”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1067.
- T. Furukawa et al., “Development of Raster Scanning at NIRS-HIMAC”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper G-04, pp. 370-373.
- T. O. Raubenheimer and P. Chen, “Ions in the Linacs of Future Linear Colliders”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-10, pp. 630-632.
- E. A. Nanni et al., “Toward High-Power High-Gradient Testing of mm-Wave Standing-Wave Accelerating Structures”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1224-1227.
- T. Yoshimoto et al., “Wide-band Induction Acceleration in the KEK Digital Accelerator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1893-1895.
- D. C. Carey, “Violation of Midplane Symmetry in Bending Magnets”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2255-2258.
- S. Rajagopalan, “Plasma Focusing of the Final Test Beam”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3555-3558.
- M. Ichikawa, H. Fujisawa, Y. Iwashita, Y. Tajima, H. Tongu, and M. Yamada, “Development of Piezoelectric Pulse Gas Valve for Small ECR Ion Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC146, pp. 418-420.
Back to search