JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	J. S. Sekutowicz et al., “Nb-Pb Superconducting RF-Gun”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS092, pp. 3493-3495. 
[n]	P. Scharrer et al., “An Upgrade for the 1.4 MeV/u Gas Stripper at the GSI UNILAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1394-1396. doi:10.18429/JACoW-IPAC2016-TUPMR058
[n]	J. I. Iversen, A. Brinkmann, A. Ermakov, A. Muhs, and J. Ziegler, “Insight into DESYÔÇÖs Test Laboratory for Niobium Raw Material and Semi-finished Products”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1157-1161. doi:10.18429/JACoW-SRF2019-THP100
[n]	P. Scharrer et al., “Stripping of High Intensity Heavy-Ion Beams in a Pulsed Gas Stripper Device at 1.4 MeV/u”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3773-3775. doi:10.18429/JACoW-IPAC2015-THPF035
[n]	Y. Zhang and C. P. Chu, “Beam Tuning of Achromatic Bending Areas of the FRIB Superconducting Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 74-76. doi:10.18429/JACoW-LINAC2016-MOPRC005
[n]	P. Michel, T. E. Cowan, U. Lehnert, and U. Schramm, “Status of the Radiation Source ELBE Upgrade”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2233-2234. doi:10.18429/JACoW-IPAC2014-WEPRO113
[n]	I. M. Kapchinskiy, “History of RFQ Development”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOB0001, pp. 43-48. 
[n]	A. He et al., “Simulation Design of a Low Energy Bunch Compressor with Space Charge Effect”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA091, pp. 2307-2309. 
[n]	L. Rybarcyk and R. C. McCrady, “The Effect of DTL Cavity Field Errors on Beam Spill at LANSCE”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 301-303. doi:10.18429/JACoW-LINAC2016-MOPLR072
[n]	G. V. Dolbilov et al., “Study of 14 GHz VLEPP Klystron With RF Absorbing Drift Tubes”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ34, pp. 1605-1607. 
[n]	Z. A. Conway et al., “Progress Towards a 2.0 K Half-Wave Resonator Cryomodule for Fermilab's PIP-II Project”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 906-909. doi:10.18429/JACoW-LINAC2016-THPLR027
[n]	G. Zschornack, F. Grossmann, V. P. Ovsyannikov, and E. Griesmayer, “Dresden Ebis-Sc ÔÇô A New Generation Of Powerful Ion Sources For The Medical Particle Therapy”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 298-299. 
[n]	E. Ritter et al., “Implementation of a Superconducting Electron Beam Ion Source into the HIT Ion Source Test Bench”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2153-2155. doi:10.18429/JACoW-IPAC2014-WEPRO083
[n]	M. Zaera-Sanz, S. L. Birch, A. Monera Martinez, and A. Nordt, “Design, Development and Implementation of a Highly Dependable Magnet Powering Interlock System for ESS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1045-1047. doi:10.18429/JACoW-IPAC2015-MOPTY050
[n]	R. Miyamoto, “Tracking Based Courant-Snyder Parameter Matching in a Linac with a Strong Space-Charge Force”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 93-96. doi:10.18429/JACoW-LINAC2016-MOPRC013
[n]	Y. Zhang, “Beam Tuning and Error Analysis of a Superconducting Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 77-79. doi:10.18429/JACoW-LINAC2016-MOPRC006
[n]	G. V. Dolbilov et al., “Design of 135 MW X-Band Relativistic Klystron for Linear Collider”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P023, pp. 3126-3128. 
[n]	M. El Khaldi, J. Bonis, A. Camara, L. Garolfi, and A. Gonnin, “Electromagnetic, Thermal, and Structural Analysis of a THOMX RF Gun Using ANSYS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3925-3927. doi:10.18429/JACoW-IPAC2016-THPOW002
[n]	A. D. Palczewski, G. V. Eremeev, R. L. Geng, and C. E. Reece, “Quench Studies of Six High Temperature Nitrogen Doped 9 Cell Cavities for Use in the LCLS-II Baseline Prototype Cryo-module at Jefferson Laboratory”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3528-3531. doi:10.18429/JACoW-IPAC2015-WEPWI019
[n]	M. Kreller et al., “An ECRIS Facility for Investigating Nuclear Reactions in Astrophysical Plasmas”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 59-63. doi:10.18429/JACoW-ECRIS2016-WEBO01
[n]	A. D. Palczewski, R. L. Geng, and H. Tian, “Optimizing Centrifugal Barrel Polishing for Mirror Finish SRFCavity and Rf Tests at Jefferson Lab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC094, pp. 2435-2437. 
[n]	R. Pardo and G. P. Zinkann, “Long-Term Operating Experience for the ATLAS Superconducting Resonators”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper MOA003, pp. 10-14. 
[n]	V. V. Katalev and S. Choroba, “Waveguide Distribution Systems for the European XFEL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH116, pp. 1286-1288. 
[n]	S. M. Gurov et al., “Status of NSLS-II Booster”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA053, pp. 196-198. 
[n]	X. P. Ding, H. G. Kirk, and K. T. McDonald, “Carbon Target Optimization for a Muon Collier/neutrino Factory With a 6.75 GeV Proton Driver”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3982-3984. doi:10.18429/JACoW-IPAC2014-THPRI089
[n]	F. Ullmann, F. Grossmann, V. P. Ovsyannikov, A. Schwan, and G. Zschornack, “Electron Beam Ion Sources – A New Access for Particle Acceleration”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS078, pp. 1719-1721. 
[n]	A. van Steenbergen and C. Gallardo, “Inverse Free Electron Laser Accelerator Development”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3PC002, pp. XX-XX. 
[n]	H. Reymond, O. O. Andreassen, C. Charrondi?¿re, G. Lehmann Miotto, A. Rijllart, and D. Scannicchio, “Lhc Dipole Magnet Splice Resistance From Sm18 Data Mining”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN007, pp. 98-101. 
[n]	S. L. Samoylov, A. M. Barnyakov, and A. E. Levichev, “Development of High Power S-Band Klystron”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 382-384. doi:10.18429/JACoW-RUPAC2018-WEPSB51
[n]	W. A. Barth et al., “U28+ Intensity Record Applying a H2-Gas Stripper Cell”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3693-3695. doi:10.18429/JACoW-IPAC2015-THPF008
[n]	A. A. Asseev, M. Yu. Gorin, and P. T. Pashkov, “The Efficiency Analysis of the Proton Beam Extraction from the IHEP Accelerator by a Bent Silicon Crystal”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP054G, pp. 2412-2414. 
[n]	H. Reymond et al., “The Post-Mortem Analysis Software Used for the Electrical Circuit Commissioning of the LHC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC151, pp. 3345-3347. 
[n]	F. Ullmann, A. Schwan, U. Hagen, O. Heid, H. von Jagwitz, and G. Zschornack, “Shaping of Ion Pulses from an Electron Beam Ion Source for Particle Injection into Accelerators”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS077, pp. 1716-1718. 
[n]	Z. A. Conway et al., “Superconducting Cavity Cryomodules for Heavy-Ion Accelerators”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEM1I01, pp. 163-165. 
[n]	A. P. Kozlov, “Magnetic Kicker for the Beam Extraction From the Nuclotron of the NICA Accelerator Complex”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper WEPSC27, unpublished. 
[n]	K. T. McDonald, V. B. Graves, H. G. Kirk, N. Souchlas, and R. J. Weggel, “Energy Deposition in the Target System of a Muon Collider/Neutrino Factory”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3979-3981. doi:10.18429/JACoW-IPAC2014-THPRI088
[n]	X. P. Ding, H. G. Kirk, K. T. McDonald, C. T. Rogers, P. Snopok, and N. Souchlas, “Energy Deposition in Magnets and Shielding of the Target System of a Staged Neutrino Factory”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPMA10, pp. 1376-1378. 
[n]	C. Steier et al., “Commissioning Results of the Fast Orbit Feedback at the ALS”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB037, pp. 3374-3376. 
[n]	A. Rijllart et al., “Industrial Controls for Test Systems From Superconducting Strands TILL Magnet Fiducialisation In the Tunnel for the LHC Project”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_005. 
[n]	L.-H. Yu and F. J. Willeke, “Ultra-Short X-ray Pulse Generation by Electron Beam Slicing in Storage Rings”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUOAB201, pp. 1134-1136. 
[n]	J. M. Jimenez et al., “Observations, Analysis and Mitigation of Recurrent LHC Beam Dumps Caused by Fast Losses in Arc Half-Cell 16L2”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 228-231. doi:10.18429/JACoW-IPAC2018-MOPMF053
[n]	H. J. Qian et al., “Analysis and Optimization of Coupler Kick in APEX”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPMA09, pp. 607-609. 
[n]	J. R. Cary et al., “All-Optical Beamlet Train Generation”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FOAB005, pp. 719-721. 
[n]	S. Ano et al., “First Beam Test Result of RFQ Electric Tune Controller at HIMAC Synchrotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP22H, pp. 1330-1332. 
[n]	X. P. Ding, J. J. Back, H. G. Kirk, and K. T. McDonald, “Optimization of Particle Production for a Staged Neutrino Factory”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPMA11, pp. 1379-1381. 
[n]	U. Berges, S. Doering, F. Enz, and M. Schmidt, “EPICS at Soft X-Ray Beamlines at DELTA”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP067, pp. XX-XX. 
[n]	J. Rose, J. M. Brennan, A. Campbell, S. Kwiatkowski, W. Pirkl, and A. Ratti, “RHIC 28 MHz Accelerating Cavity System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH031, pp. 840-842. 
[n]	D. A. Goldberg and G. R. Lambertson, “Coping with Power-Limited Transverse Stochastic Cooling Systems”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 642-645. 
[n]	D. A. Goldberg, W. Barry, G. R. Lambertson, and F. Voelker, “A High-Frequency Schottky Detector for Use in the Tevatron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 547-550. 
[n]	A. A. Asseev and M. Yu. Gorin, “Non-resonant Slow Extraction of Protons to the Tagged Neutrino Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP053G, pp. 2409-2411. 
[n]	Z. A. Conway, B. M. Guilfoyle, M. Kedzie, M. P. Kelly, T. Reid, and H. Guo, “Progress Toward 2 K High Performance Half-wave Resonators and Cryomodule”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 692-694. doi:10.18429/JACoW-SRF2017-WEYA05
[n]	C. Reece, J. Benesch, and J. Preble, “Refining and Maintaining the Optimal Performance of the CEBAF SRF Systems”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH303, pp. 1186-1188. 
[n]	A. Tuzikov et al., “Beam Transfer From Heavy-Ion Linear Accelerator HILAC Into Booster of NICA Accelerator Complex”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 444-446. doi:10.18429/JACoW-RUPAC2016-WEPSB037
[n]	C. Steier, A. Biocca, E. Domning, S. Jacobson, G. Portmann, and Y. Wu, “Design of a Fast Global Orbit Feedback System for the Advanced Light Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH009, pp. 1252-1254. 
[n]	A. Sharma, K. Åhnberg, L. Roslund, A. Andersson, P. Tavares, and A. Vorozhtsov, “Design overview and project status of the PM gradient dipole at MAX IV”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7164, unpublished. 
[n]	A. Prudnikava, Y. Tamashevich, A. Matveenko, J. Knobloch, O. Kugeler, and A. Neumann, “Studies of in-situ baking of SRF niobium cavities without a furnace at HZB”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 266-274. doi:10.18429/JACoW-SRF2025-TUA04
[n]	V. Chouhan et al., “Latest Development of Electropolishing Optimization for 650 MHz Cavity”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 512-516. doi:10.18429/JACoW-SRF2023-TUPTB042
[n]	O. A. Anderson, W. S. Cooper, D. A. Goldberg, and L. Soroka, “A Transverse-Field-Focussing (TFF) Accelerator for Intense Ribbon Beams”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3215-3218. 
[n]	T. Powers, P. Kneisel, J. Mammosser, P. Kushnick, C. Reece, and J. Benesch, “Performance of Production SRF Cavities for CEBAF”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1016-1019. 
[n]	S. H. Kim et al., “Preservation of Quality Factor of Half Wave Resonator during Quenching in the Presence of Solenoid Field”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3270-3272. doi:10.18429/JACoW-IPAC2015-WEPTY009
[n]	G. V. Dolbilov et al., “Status of SILUND-21 Linear Induction Accelerator Project”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 748-751. 
[n]	E. Esarey et al., “All-Optical Accelerator Experiments at LBNL”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TH201, pp. 701-705. 
[n]	P. Scharrer et al., “A Pulsed Gas Stripper for Stripping of High-Intensity, Heavy-Ion Beams at 1.4 MeV/u at the GSI UNILAC”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper TUA1C01, pp. 144-147. 
[n]	K. ?àhnberg, M. A. G. Johansson, P. F. Tavares, and L. Th, “MAX IV Storage Ring Magnet Installation Procedure”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1234-1236. doi:10.18429/JACoW-NAPAC2016-THPOA64
[n]	C. Thomas-Madec et al., “Successful RF and Cryogenic Tests of the SOLEIL Cryomodule”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP45, pp. 564-566. 
[n]	M. Schmidt, A. Thorn, and G. Zschornack, “DREEBIT EBIS/T for Applications in Accelerator Physics”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper WEB03, pp. 170-171. 
[n]	R. Pardo, L. M. Bollinger, and W. Henning, “Longitudinal Beam Optimization of the Argonne Superconducting Heavy-Ion Linear Accelerator”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H05, pp. 270-273. 
[n]	V. V. Katalev and S. Choroba, “Compact Waveguide Distribution with Asymmetric Shunt Tees for the European XFEL”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN015, pp. 176-178. 
[n]	B. van der Horst et al., “Development and Adustment of Tools for Superconducting RF Gun Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 495. doi:10.18429/JACoW-SRF2021-TUPTEV006
[n]	R. Pardo, Y. Kawarasaki, and K. Wasniewski, “A CAMAC-Based Intelligent Subsystem for ATLAS, Example Application: Cryogenic Monitoring and Control”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2017-2020. 
[n]	N. Delerue, D. Auguste, J. Bonis, F. Gauthier, S. Jenzer, and A. M. Moutardier, “Tests of a 3D Printed BPM with a Stretched Wire and with a Particle Beam”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4368-4371. doi:10.18429/JACoW-IPAC2019-FRXXPLS1
[n]	I. M. Kapchinskiy, “Choice of the Block-Scheme of 1-1.5 GeV 300 mA Linear Accelerator”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH466, pp. 776-777. 
[n]	M. F. Blinov, K. V. Astrelina, V. V. Balakin, O. I. Meshkov, A. A. Starostenko, and V. L. Dorokhov, “Turn-by-Turn Measurements for Beam Dynamics at Vepp-5 Damping Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3452-3454. doi:10.18429/JACoW-IPAC2016-THPMR031
[n]	H. Reymond, M. F. Gomez De La Cruz, I. T. Matasaho, and A. Rijllart, “The Control System of the CERN Platform for the Test of the High Luminosity LHC Superconducting Magnets”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 918-922. doi:10.18429/JACoW-ICALEPCS2017-TUPHA202
[n]	G. Zschornack et al., “Status of Electron Beam Ion Sources for Particle Therapy”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper G-05, pp. 374-377. 
[n]	B. Salvachua et al., “Handling 1 MW Losses with the LHC Collimation System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 174-177. doi:10.18429/JACoW-IPAC2014-MOPRO043
[n]	B. C. Isherwood, G. Machicoane, D. E. Neben, G. Pozdeyev, and J. W. Stetson, “Plasma Instability Studies of the SuSI 18 GHz Source”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 157-161. doi:10.18429/JACoW-ECRIS2018-WEA3
[n]	R. Pardo and G. P. Zinkann, “Long-Term Operating Experience for the ATLAS Superconducting Resonators”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper MOA003, pp. 10-14. 
[n]	G. Gatti et al., “Metal Film Photocathodes for High Brightness Electron Injectors”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH027, pp. 104-106. 
[n]	K. Gubin et al., “Test of Construction for High Temperature Intense Neutron Target Prototype”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT118, pp. 1416-1418. 
[n]	C. Charrondiere et al., “RADE - A Rapid Application Development Framework Used for LHC Hardware Commissioning Tools and Other Accelerator Related Applications”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP097, pp. 868-870. 
[n]	F. J. Willeke, “Commissioning of NSLS-II”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 11-16. doi:10.18429/JACoW-IPAC2015-MOYGB3
[n]	M. Gerstel, A. Ashton, R. J. Gildea, K. Levik, and G. Winter, “Data Analysis Infrastructure for Diamond Light Source Macromolecular & Chemical Crystallography and Beyond”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1032. doi:10.18429/JACoW-ICALEPCS2019-WEMPR001
[n]	A. Monera Martinez, M. Andersen, D. Belohrad, L. K. Jensen, L. Soby, and G. Kasprowicz, “Upgrade of the CERN PSB/CPS Fast Intensity Measurements”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD66, pp. 200-202. 
[n]	F. Ullmann, V. P. Ovsyannikov, M. Schmidt, and G. Zschornack, “Electron Beam Ion Sources, Ion Optical Elements and Beam Diagnostics for Particle Accelerators”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD88, pp. 254-256. 
[n]	A. A. Asseev, Yu. S. Fedotov, E. A. Ludmirsky, V. A. Maischeev, S. B. Nuruschev, and A. N. Vasil, “Peculiarities of Using the Bent Crystal for the Extraction of Protons from IHEP Accelerator to the PROZA Facility”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1504-1507. 
[n]	E. Al-Dmour, K. ?àhnberg, and M. J. Grabski, “Experience with the Vacuum System for the First Fourth Generation Light Source: MAX IV”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 10. doi:10.18429/JACoW-MEDSI2020-MOOA02
[n]	R. Giacone et al., “Generation of Single Pulse Particle Beams in a Plasma Channel by Laser Injection in Laser Wakefield Accelerators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG039, pp. 1885-1887. 
[n]	M. Wiseman et al., “Jefferson Lab IR FEL Cryomodule Modifications and Test Results”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P035, pp. 3108-3110. 
[n]	T. Endo, “H- ACCELERATION WITH AVF 930 CYCLOTRON”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P19, pp. XX-XX. 
[n]	A. A. Asseev and M.Yu. Gorin, “Use of a Bent Crystal for Beam Extraction in a Slow Extraction Mode”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAR23, pp. 1955-1957. 
[n]	M. T. Crofford, X. Geng, T. W. Hardek, and T. L. Davidson, “The Spallation Neutron Source Eight-Channel Pulsed Power Meter”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP300, pp. 684-686. 
[n]	K. Krzysik et al., “Test of the 1.3 GHz Superconducting Cavities for the European X-ray Free Electron Laser”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP037, pp. 191-193. 
[n]	J. Byrd, D. A. Goldberg, M. Irwin, and R. A. Rimmer, “Updated Impedance Estimate of the PEP-II RF Cavity”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP070L, pp. 2035-2037. 
[n]	M. Zerlauth, R. Schmidt, and J. Wenninger, “Commissioning and Operation of the LHC Machine Protection System”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper TUO1A02, pp. 271-275. 
[n]	M. Vall?®au et al., “Construction and Optimization of Cryogenic Undulators at SOLEIL”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 193-198. doi:10.18429/JACoW-FLS2018-THP2WD01
[n]	N. Delerue et al., “Study of the Performances of a 3D Printed BPM”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3656-3659. doi:10.18429/JACoW-IPAC2018-THPAL016
[n]	D. Kostin et al., “SRF Accelerating Modules Upgrade for Flash Linac at DESY”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 306-310. doi:10.18429/JACoW-SRF2023-MOPMB082
[n]	D. E. Neben, B. C. Isherwood, D. Leitner, G. Machicoane, J. W. Stetson, and L. Tobos, “X-Ray Investigation on the Superconducting Source for Ions (SuSI)”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 120-124. doi:10.18429/JACoW-ECRIS2018-TUP15
[n]	V. V. Katalev, S. Choroba, E. M. Apostolov, and A. A. Seliverstov, “A New Type of Waveguide Distribution for the Accelerator Module Test Facility of the European XFEL”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP021, pp. 475-477. 
[n]	L. S. Nadolski et al., “Progress Status for the 10 Year Old SOLEIL Synchrotron Radiation Facility”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2564-2567. doi:10.18429/JACoW-IPAC2017-WEPAB004
[n]	T. Reid, Z. A. Conway, B. M. Guilfoyle, M. Kedzie, M. P. Kelly, and M. K. Ng, “New SRF Structures Processed at the ANL Cavity Processing Facility”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 434-437. doi:10.18429/JACoW-SRF2019-TUP018
[n]	B. C. Isherwood and G. Machicoane, “Microcontrollers as Gate and Delay Generators for Time Resolved Measurements”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 57-59. doi:10.18429/JACoW-ECRIS2020-MOZZO06
[n]	J. K. Sekutowicz, P. Kneisel, A. Muhs, and R. Nietubyc, “Cryogenic Test of the Nb-Pb SRF Photoinjector Cavities”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP056, pp. 488-490. 
[n]	S. Banerjee, N. D. Powers, V. Ramanathan, B. Shadwick, and D. P. Umstadter, “Stable, Monoenergetic 50-400 MeV Electron Beams with a Matched Laser Wakefield Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH4GBC02, pp. 3151-3153. 
[n]	J. H. Han et al., “Development and characterization of a FEBIAD ion source for RI beam production at the RAON ISOL system”, presented at the IPAC'26, Deauville, France, May 2026, paper THP3614, unpublished. 
[n]	H. Matsumoto, H. Sakaki, K. Nagashima, T. Endo, Y. Watanabe, and K. Kondo, “Evaluating beam neutralization and transport dynamics in laser-driven ion accelerators”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 502-505. doi:10.18429/JACoW-LINAC2024-TUPB087
[n]	X. W. Wu et al., “High-Gradient Breakdown Studies of an X-Band Accelerating Structure Operated in the Reversed Taper Direction”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1543-1546. doi:10.18429/JACoW-IPAC2021-TUPAB076
[n]	T. B. Petersen et al., “Demonstration of Niobium Tin in 218 MHz Low-Beta Quarter Wave Accelerator Cavity”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 388-392. doi:10.18429/JACoW-SRF2023-TUPTB001
[n]	S. Y. Baek et al., “Network status for PAL-XFEL”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1611-1613. doi:10.18429/JACoW-IPAC2024-TUPR84
[n]	J. Smedley et al., “Progress on Lead Photocathodes for Superconducting Injectors”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAP039, pp. 2598-2600. 
[n]	S. Choroba, V. V. Katalev, and E. M. Apostolov, “Series Production of the RF Power Distribution for the European XFEL”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 1008-1010. doi:10.18429/JACoW-LINAC2016-THPLR067

For LaTeX

Use Complete Form

For BibTeX

References

Back to search