Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Z. J. Wang et al., “The Beam Commissioning Plan of Injector II in C-ADS”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB026, pp. 906-908.
[n] S. S. Kurennoy, “Electromagnetic Modeling of Beam Position and Phase Monitors for LANSCE Linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS053, pp. 4111-4113.
[n] N. Cook et al., “Fast laser focal position correction using deployed models”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2393-2395. doi:10.18429/JACoW-IPAC2024-WEPG72
[n] C. Phillips et al., “Experimental investigation of zero transverse force modes in sub-THz dielectric lined waveguide”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR21, unpublished.
[n] S. Posen, M. Liepe, G. Catelani, J. P. Sethna, and M. K. Transtrum, “Theoretical Field Limits for Multi-Layer Superconductors”, in Proc. SRF'13, Paris, France, Sep. 2013, paper WEIOC04, pp. 794-799.
[n] L. M. A. Ferreira, N. S. Chritin, R. Ferreira, and V. Gerbet, “Surface Polishing Facility for Superconducting RF Cavities at CERN”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 387. doi:10.18429/JACoW-SRF2021-TUPFAV004
[n] O. Shelbaya and O. K. Kester, “Toward an End-to-End Model for ISAC-I Accelerators”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3500-3502. doi:10.18429/JACoW-IPAC2018-THPAK112
[n] F. Casagrande et al., “Study on Fault Scenarios of Coaxial Type HOM Couplers in SRF Cavities”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP081, pp. 770-772.
[n] R. E. Laxdal and G. H. Mackenzie, “Beam Dynamics of RF Devices to Improve the Efficiency of Proposed H- Extraction from TRIUMF”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2453-2456.
[n] M. T. Buttram, “Operation of a Repetitively Pulsed 300kV, 10kA Electron Beam Diode”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4183-4186.
[n] J. L. Yntema and P. Billquist, “Modification of the Argonne FN Tandem”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1659-1662.
[n] B. Xi, J. I. M. Botman, H. L. Hagedoorn, A. J. W. Sweep, C. J. Timmermans, and G. A. Webers, “Injection Requirements for the EUTERPE Storage Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1446-1449.
[n] M. Yamanaka and K. Shimada, “A Novel Manufacture of Niobium SRF Cavities by Cold Spray”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 545-548. doi:10.18429/JACoW-SRF2023-TUPTB052
[n] B. Leung, D. S. Doran, X. Lu, C. L. Phillips, P. Piot, and J. G. Power, “Design of a W-Band Corrugated Waveguide for Structure Wakefield Acceleration”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 210-213. doi:10.18429/JACoW-NAPAC2022-MOPA74
[n] M. Jaski, “Eight-piece quadrupole magnet allows precise pole tip positioning”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR41, unpublished.
[n] H. W. Miller, T. G. Jurgens, Q. A. Kerns, R. Padilla, and Z. Qian, “Tuning Methods for the 805 MHz Side-Coupled Cavities in the Fermilab Linac Upgrade”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO425, pp. 111-113.
[n] Y. C. Chen et al., “Optimization and Upgrade of Slow Extraction Control System for HIRFL CSR Main Ring”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1663-1665. doi:10.18429/JACoW-ICALEPCS2017-THPHA122
[n] T. Hodgetts et al., “Strongly tapered helical undulator system for FAST-GREENS installation”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1240-1242. doi:10.18429/JACoW-IPAC2023-MOPM112
[n] V. Kamerdzhiev, J. Dietrich, F. Klehr, and K. Reimers, “Progress with the Scintillation Profile Monitor at COSY”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD51, pp. 164-166.
[n] G. A. Fatkin, A. M. Batrakov, I. V. Ilyin, G. Y. Kurkin, A. M. Pilan, and M. Yu. Vasilyev, “Controller for RF Stations for Booster of NICA Project”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC29, pp. 383-385.
[n] J. Nasser et al., “Algorithm to Mitigate Magnetic Hysteresis in Magnets with Unipolar Power Supplies”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 156-159. doi:10.18429/JACoW-IPAC2022-MOPOST039
[n] S. S. Kurennoy, L. Rybarcyk, and T. P. Wangler, “Efficient Accelerating Structures for Low-Energy Light Ions”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FROBC03, pp. 3824-3826.
[n] H. H. Tsai et al., “Design of a Liquid Helium Transfer System for the TPS Project”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP218, pp. 1220-1222.
[n] D. Wildman, J. Dey, I. Kourbanis, and Z. Qian, “A Prototype 7.5 MHz Finemet® Loaded RF Cavity and 200 kW Amplifier for the Fermilab Proton Driver”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH050, pp. 882-884.
[n] E. Donegani et al., “The four beam destinations for the commissioning of the ESS Normal Conducting Linac”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 151-154. doi:10.18429/JACoW-LINAC2024-MOPB046
[n] Z. Qian, M. Champion, H. W. Miller, A. Moretti, and R. Padilla, “Final Module Tuning of the 805 MHz Side-Coupled Cavities for the Fermilab Linac Upgrade”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-44, pp. 422-424.
[n] S. S. Kurennoy and J. F. Power, “Meander-Line Current Structure Development for SNS Fast Chopper”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THD12, pp. 932-934.
[n] J. Norem et al., “Recent RF Results from the MuCool Test Area”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN090, pp. 2239-2241.
[n] S. Asaoka et al., “STATUS REPORT ON THE KEK PHOTON FACTORY”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUCM02, pp. XX-XX.
[n] H. W. Miller, T. G. Jurgens, R. Padilla, and Z. Qian, “Tuning Summary for the 805 MHz Side-Coupled Cavities in the Fermilab Linac Upgrade”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-43, pp. 419-421.
[n] O. Chimalpopoca, R. Agustsson, Y.-C. Chen, and A. Schillaci, “Development of a cryogen free MgB2 high temperature superconducting undulator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3797-3799. doi:10.18429/JACoW-IPAC2024-THPS27
[n] A. Y. Murokh et al., “Re-Circulated Inverse Compton Scattering X-ray Source for Industrial Applications”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP002, pp. 2139-2141.
[n] A. Denker et al., “Status of the HZB Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEAO04, pp. 159-162. doi:10.18429/JACoW-CYCLOTRONS2022-WEAO04
[n] K. Hatanaka et al., “Development of HTS Magnets for Accelerators”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 294-296. doi:10.18429/JACoW-Cyclotrons2016-THB03
For LaTeX
Use Complete Form
For BibTeX
References
- Z. J. Wang et al., “The Beam Commissioning Plan of Injector II in C-ADS”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB026, pp. 906-908.
- S. S. Kurennoy, “Electromagnetic Modeling of Beam Position and Phase Monitors for LANSCE Linac”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS053, pp. 4111-4113.
- N. Cook et al., “Fast laser focal position correction using deployed models”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG72, pp. 2393-2395.
- C. Phillips et al., “Experimental investigation of zero transverse force modes in sub-THz dielectric lined waveguide”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR21, unpublished.
- S. Posen, M. Liepe, G. Catelani, J. P. Sethna, and M. K. Transtrum, “Theoretical Field Limits for Multi-Layer Superconductors”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper WEIOC04, pp. 794-799.
- L. M. A. Ferreira, N. S. Chritin, R. Ferreira, and V. Gerbet, “Surface Polishing Facility for Superconducting RF Cavities at CERN”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 387.
- O. Shelbaya and O. K. Kester, “Toward an End-to-End Model for ISAC-I Accelerators”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3500-3502.
- F. Casagrande et al., “Study on Fault Scenarios of Coaxial Type HOM Couplers in SRF Cavities”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP081, pp. 770-772.
- R. E. Laxdal and G. H. Mackenzie, “Beam Dynamics of RF Devices to Improve the Efficiency of Proposed H- Extraction from TRIUMF”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2453-2456.
- M. T. Buttram, “Operation of a Repetitively Pulsed 300kV, 10kA Electron Beam Diode”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4183-4186.
- J. L. Yntema and P. Billquist, “Modification of the Argonne FN Tandem”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1659-1662.
- B. Xi, J. I. M. Botman, H. L. Hagedoorn, A. J. W. Sweep, C. J. Timmermans, and G. A. Webers, “Injection Requirements for the EUTERPE Storage Ring”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1446-1449.
- M. Yamanaka and K. Shimada, “A Novel Manufacture of Niobium SRF Cavities by Cold Spray”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper TUPTB052, pp. 545-548.
- B. Leung, D. S. Doran, X. Lu, C. L. Phillips, P. Piot, and J. G. Power, “Design of a W-Band Corrugated Waveguide for Structure Wakefield Acceleration”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 210-213.
- M. Jaski, “Eight-piece quadrupole magnet allows precise pole tip positioning”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR41, unpublished.
- H. W. Miller, T. G. Jurgens, Q. A. Kerns, R. Padilla, and Z. Qian, “Tuning Methods for the 805 MHz Side-Coupled Cavities in the Fermilab Linac Upgrade”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO425, pp. 111-113.
- Y. C. Chen et al., “Optimization and Upgrade of Slow Extraction Control System for HIRFL CSR Main Ring”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1663-1665.
- T. Hodgetts et al., “Strongly tapered helical undulator system for FAST-GREENS installation”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM112, pp. 1240-1242.
- V. Kamerdzhiev, J. Dietrich, F. Klehr, and K. Reimers, “Progress with the Scintillation Profile Monitor at COSY”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD51, pp. 164-166.
- G. A. Fatkin, A. M. Batrakov, I. V. Ilyin, G. Y. Kurkin, A. M. Pilan, and M. Yu. Vasilyev, “Controller for RF Stations for Booster of NICA Project”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC29, pp. 383-385.
- J. Nasser et al., “Algorithm to Mitigate Magnetic Hysteresis in Magnets with Unipolar Power Supplies”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 156-159.
- S. S. Kurennoy, L. Rybarcyk, and T. P. Wangler, “Efficient Accelerating Structures for Low-Energy Light Ions”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FROBC03, pp. 3824-3826.
- H. H. Tsai et al., “Design of a Liquid Helium Transfer System for the TPS Project”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP218, pp. 1220-1222.
- D. Wildman, J. Dey, I. Kourbanis, and Z. Qian, “A Prototype 7.5 MHz Finemet® Loaded RF Cavity and 200 kW Amplifier for the Fermilab Proton Driver”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH050, pp. 882-884.
- E. Donegani et al., “The four beam destinations for the commissioning of the ESS Normal Conducting Linac”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 151-154.
- Z. Qian, M. Champion, H. W. Miller, A. Moretti, and R. Padilla, “Final Module Tuning of the 805 MHz Side-Coupled Cavities for the Fermilab Linac Upgrade”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-44, pp. 422-424.
- S. S. Kurennoy and J. F. Power, “Meander-Line Current Structure Development for SNS Fast Chopper”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THD12, pp. 932-934.
- J. Norem et al., “Recent RF Results from the MuCool Test Area”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN090, pp. 2239-2241.
- S. Asaoka et al., “STATUS REPORT ON THE KEK PHOTON FACTORY”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUCM02, pp. XX-XX.
- H. W. Miller, T. G. Jurgens, R. Padilla, and Z. Qian, “Tuning Summary for the 805 MHz Side-Coupled Cavities in the Fermilab Linac Upgrade”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-43, pp. 419-421.
- O. Chimalpopoca, R. Agustsson, Y.-C. Chen, and A. Schillaci, “Development of a cryogen free MgB2 high temperature superconducting undulator”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS27, pp. 3797-3799.
- A. Y. Murokh et al., “Re-Circulated Inverse Compton Scattering X-ray Source for Industrial Applications”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP002, pp. 2139-2141.
- A. Denker et al., “Status of the HZB Cyclotron”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper WEAO04, pp. 159-162.
- K. Hatanaka et al., “Development of HTS Magnets for Accelerators”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 294-296.
Back to search
