Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y.-T. Li et al., “Design and Implementation of a Power Monitoring and Distribution System for the SSPA-Based RF Transmitter at NSRRC”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB022, unpublished.
[n] S. J. Cooke and B. Levush, “Rapid Electromagnetic Analysis of Entire Accelerator Structures”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper FPAT018, unpublished.
[n] P. Forck et al., “Scintillation Screen Investigations for High Energy Heavy Ion Beams at GSI”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD53, pp. 170-172.
[n] Y. Ishi, T. Uesugi, and Y. Mori, “A conceptual design of FFA ring for super heavy element production adopting the ERIT mechanism.”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 955-957. doi:10.18429/JACoW-IPAC2023-MOPL179
[n] S. V. Kutsaev et al., “Beam Mapping Linearity Improvement in Multi-Dimensional Bunch Shape Monitor”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 239-242. doi:10.18429/JACoW-LINAC2022-MOPORI08
[n] F.-Y. Chang et al., “Tuner loop based on FPGA for Petra cavity at TPS booster ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4216-4218. doi:10.18429/JACoW-IPAC2023-THPA108
[n] Z. Guo, Q. Han, X. Luo, and S. Wang, “The Lattice Design of a Proposed Beijing Therapy Proton Synchrotron”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP002G, pp. 2635-2637.
[n] S. S. Cao, R. Jiang, Y. B. Leng, and R. X. Yuan, “Design and Test of CBPM Prototypes for SHINE”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 124-127. doi:10.18429/JACoW-IBIC2020-WEPP13
[n] C. Jing et al., “Development of a flux-concentrator-based 2-Tesla solenoid as a round lens for ultrafast microscopy”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1597-1599. doi:10.18429/JACoW-IPAC2024-TUPR77
[n] E. N. Shaposhnikova, T. Bohl, and T. P. R. Linnecar, “Longitudinal Peak Detected Schottky Spectrum”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper TUO1C04, pp. 363-367.
[n] J. M. Byrd et al., “Femtosecond Synchronization of Laser Systems for the LCLS”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper MOCNB04, pp. 58-62.
[n] T. Hu et al., “Design and Simulation of Microstrip Directional Coupler with Tight Structure and High Directivity”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP056, pp. 1677-1679.
[n] J. Repond, K. Iliakis, M. Schwarz, and E. N. Shaposhnikova, “Simulations of Longitudinal Beam Stabilisation in the CERN SPS With BLonD”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 179-185. doi:10.18429/JACoW-ICAP2018-TUPAF06
[n] T. Antonsen, A. Einarsson, I. Haber, L. Dovlatyan, and P. O'Shea, “Adjoint optimization of circular lattices”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPL076, unpublished.
[n] D. Prasuhn, J. Dietrich, R. Maier, R. Stassen, and H. Stockhorst, “Cooling Experiments at COSY in Preparation for the HESR”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper MOM2MCIO03, pp. 21-21.
[n] M. Leporis, V. Bekhterev, S. Bogomolov, A. Efremov, G. Gulbekian, and Yu. Kostyukhov, “THE NEW ION SOURCE DECRISÔÇô4 FOR THE SECOND PHASE OF”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUIP05, pp. XX-XX.
[n] T. Bizen et al., “Fabrication and Magnetic Field Measurement of an APPLE-2 Type Variable Polarizing Undulator”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP02L, pp. 2243-2245.
[n] I. B. Vasserman et al., “Magnetic Measurements and Tuning of Undulators for the APS FEL Project”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP97, pp. 2489-2491.
[n] G. E. Lawler et al., “RF Testbed for Cryogenic Photoemission Studies”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2810-2813. doi:10.18429/JACoW-IPAC2021-WEPAB096
[n] C. GARCIA JAIMES, L. van Riesen-Haupt, R. Tomas, and T. Pieloni, “Exploring FCC-ee optics designs with combined function magnets”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 698-701. doi:10.18429/JACoW-IPAC2023-MOPL066
[n] Z. Tang, A. Chen, and W. Chou, “A New Kind of Beam Pipe for Rapid Cycling Proton Synchrotrons”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPB006, pp. 623-624.
[n] S. P. Zhang et al., “The Design and Commission of Vacuum System for CYCIAE-230 Superconducting Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper MOPO007, pp. 66-69. doi:10.18429/JACoW-CYCLOTRONS2022-MOPO007
[n] L. Zhang, M. Lesourd, and T. Lewis, “Vibration Damping Systems for Magnet Girder Assembly at the ESRF”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH109, pp. 1465-1467.
[n] W. Assmann, “Beam Dynamics in SLC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7B001, pp. 1331-1335.
[n] A. Chapman-Hatchett, V. Chohan, and T. E. d'Amico, “Tune Measurement for the CERN Proton Synchrotron Booster Rings using DSP in VME”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA146, pp. 2202-2204.
[n] K. Renuka et al., “Transverse Beam Profile Monitoring using Scintillation Screens for High Energy Ion Beams”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper TUPG022, pp. 183-185.
[n] K. T. Nguyen, R. F. Schneider, J. R. Smith, and H. S. Uhm, “Relativistic Electron Beam Ion Hose Instability in Beam-Induced Channels”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1096-1099.
[n] B. Freemire et al., “Electronic brachytherapy replacement of iridium-192”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3625-3628. doi:10.18429/JACoW-IPAC2024-THPR49
[n] W. F. Fu et al., “Field Matching of F-D-F, Gap Shaping Magnets for a 2 GeV CW FFA”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEPO001, pp. 200-203. doi:10.18429/JACoW-CYCLOTRONS2022-WEPO001
[n] S. J. Cooke and B. Levush, “Eigenmodes of Microwave Cavities Containing High-Loss Dielectric Materials”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5C011, pp. 2431-2433.
[n] R. H. Stokes, F. J. Humphry, J. M. Potter, and P. L. Roybal, “A Spiral-Resonator Radio-Frequency Quadruoole Accelerator Structure”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3530-3533.
[n] A. K. Krasnykh, “Overview of Driver Technologies for Nanosecond TEM Kickers”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3645-3647. doi:10.18429/JACoW-IPAC2016-THPMW042
[n] T. Yamanaka et al., “Status of the First Commissioning of the Shintake Monitor for ATF2”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP062, pp. 4093-4095.
[n] J. Callahan, O. Chubenko, L. Cultrera, S. Karkare, and J. Mendez, “Low-temperature and strained-lattice effects on Monte Carlo modeling of spin-polarized photoemission from GaAs”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM050, unpublished.
[n] V. I. Shvedunov, A. N. Ermakov, A. I. Karev, E. A. Knapp, N. P. Sobenin, and W. P. Trower, “70 MeV Electron Racetrack Microtron Commissioning”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH063, pp. 2596-2598.
[n] A. H. Botha and J. J. Kritzinger, “Design of an RF-System for an Open-Sector Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper C-04, pp. 156-159.
[n] T. He et al., “Compensation of an elliptically polarizing undulator in the HLS-II storage ring”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPB066, unpublished.
[n] V. P. Struev et al., “External Neutron Source for Research Reactor Based on Linear Accelerator and Beryllium Target”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 754-756. doi:10.18429/JACoW-IPAC2014-MOPRI066
[n] R. J. Nawrocky, “Magnet Power Supply System for the ISABELLE Half-Cell Prototype”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1358-1361.
[n] V. V. Smaluk, A. Blednykh, K. Ha, Y. Tian, and X. Yang, “A Method of Local Impedance Measurement by Sine-wave Beam Excitation”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 41-43. doi:10.18429/JACoW-IBIC2017-MOPCC03
[n] D. Belver et al., “Overview of the BPM System of the ESS-Bilbao”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD21, pp. 89-91.
[n] A. K. Krasnykh, A. Brachmann, F.-J. Decker, T. J. Maxwell, and J. Sheppard, “Overview of High Power Vacuum Dry RF Load Designs”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 504-506. doi:10.18429/JACoW-IPAC2016-MOPMW043
[n] W. Assmann, “Dispersion in the Presence of Strong Transverse Wakefields”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9V014, pp. 1523-1525.
[n] C. S. Yang, C.-H. Chang, Y. L. Chu, T. Y. Chung, C.-S. Hwang, and F.-Y. Lin, “Design and Performance of the TPS DC Septum Magnet”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1301-1303. doi:10.18429/JACoW-IPAC2014-TUPRO108
[n] K. H??bner, “Accelerator-Based Neutrino Beams”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THZGB002, pp. 30-33.
[n] P. K. Skowronski et al., “Optics Performance of the LHC During the 2012 Run”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI039, pp. 1433-1435.
[n] G. E. Krafczyk, C. C. Jensen, H. Pfeffer, and G. J. Warchol, “A Dual Triangle Timing Circuit for Improved Performance of 4-Quadrant H-Bridge Switchers”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP008, pp. 1547-1549.
[n] M. J. Cola, M. B. Lyons, D. F. Teter, and R. C. Gentzlinger, “Dissimilar Metal Joints for the APT Superconducting Cavity's Cryogenic Plumbing System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP126, pp. 962-964.
[n] L.-J. Chen et al., “Design and integration on the test station for PSM of a 300 kW transmitter”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1002-1004. doi:10.18429/JACoW-IPAC2023-MOPM013
[n] S. Koscielniak and K. Zeno, “Adiabatic capture of longitudinal phase space”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3387-3390. doi:10.18429/JACoW-IPAC2023-WEPL118
[n] J. Ph. G. L et al., “The Second LHC Long Shutdown (LS2) for the Superconducting Magnets”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 240-243. doi:10.18429/JACoW-IPAC2018-MOPMF056
[n] A. Deshpande et al., “Pressure spike in the LBNF absorber core’s gun drilled cooling channel from an accident beam pulse”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3830-3832. doi:10.18429/JACoW-IPAC2024-THPS42
[n] F. A. Heyn and T. K. Khoe, “Design and Performance of a 12-MeV Isochronous Cyclotron”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A08, pp. 29-39.
[n] M. Yi and Z. Wang, “Beam dynamics design of the superconducting section of a 100 mA superconducting linac”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper TUPB059, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- Y.-T. Li et al., “Design and Implementation of a Power Monitoring and Distribution System for the SSPA-Based RF Transmitter at NSRRC”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB022, this conference.
- S. J. Cooke and B. Levush, “Rapid Electromagnetic Analysis of Entire Accelerator Structures”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT018, unpublished.
- P. Forck et al., “Scintillation Screen Investigations for High Energy Heavy Ion Beams at GSI”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD53, pp. 170-172.
- Y. Ishi, T. Uesugi, and Y. Mori, “A conceptual design of FFA ring for super heavy element production adopting the ERIT mechanism.”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL179, pp. 955-957.
- S. V. Kutsaev et al., “Beam Mapping Linearity Improvement in Multi-Dimensional Bunch Shape Monitor”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 239-242.
- F.-Y. Chang et al., “Tuner loop based on FPGA for Petra cavity at TPS booster ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA108, pp. 4216-4218.
- Z. Guo, Q. Han, X. Luo, and S. Wang, “The Lattice Design of a Proposed Beijing Therapy Proton Synchrotron”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP002G, pp. 2635-2637.
- S. S. Cao, R. Jiang, Y. B. Leng, and R. X. Yuan, “Design and Test of CBPM Prototypes for SHINE”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 124-127.
- C. Jing et al., “Development of a flux-concentrator-based 2-Tesla solenoid as a round lens for ultrafast microscopy”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR77, pp. 1597-1599.
- E. N. Shaposhnikova, T. Bohl, and T. P. R. Linnecar, “Longitudinal Peak Detected Schottky Spectrum”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper TUO1C04, pp. 363-367.
- J. M. Byrd et al., “Femtosecond Synchronization of Laser Systems for the LCLS”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper MOCNB04, pp. 58-62.
- T. Hu et al., “Design and Simulation of Microstrip Directional Coupler with Tight Structure and High Directivity”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP056, pp. 1677-1679.
- J. Repond, K. Iliakis, M. Schwarz, and E. N. Shaposhnikova, “Simulations of Longitudinal Beam Stabilisation in the CERN SPS With BLonD”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 179-185.
- T. Antonsen, A. Einarsson, I. Haber, L. Dovlatyan, and P. O'Shea, “Adjoint optimization of circular lattices”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL076, unpublished.
- D. Prasuhn, J. Dietrich, R. Maier, R. Stassen, and H. Stockhorst, “Cooling Experiments at COSY in Preparation for the HESR”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper MOM2MCIO03, pp. 21-21.
- M. Leporis, V. Bekhterev, S. Bogomolov, A. Efremov, G. Gulbekian, and Yu. Kostyukhov, “THE NEW ION SOURCE DECRISÔÇô4 FOR THE SECOND PHASE OF”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUIP05, pp. XX-XX.
- T. Bizen et al., “Fabrication and Magnetic Field Measurement of an APPLE-2 Type Variable Polarizing Undulator”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP02L, pp. 2243-2245.
- I. B. Vasserman et al., “Magnetic Measurements and Tuning of Undulators for the APS FEL Project”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP97, pp. 2489-2491.
- G. E. Lawler et al., “RF Testbed for Cryogenic Photoemission Studies”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2810-2813.
- C. GARCIA JAIMES, L. van Riesen-Haupt, R. Tomas, and T. Pieloni, “Exploring FCC-ee optics designs with combined function magnets”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL066, pp. 698-701.
- Z. Tang, A. Chen, and W. Chou, “A New Kind of Beam Pipe for Rapid Cycling Proton Synchrotrons”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROPB006, pp. 623-624.
- S. P. Zhang et al., “The Design and Commission of Vacuum System for CYCIAE-230 Superconducting Cyclotron”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper MOPO007, pp. 66-69.
- L. Zhang, M. Lesourd, and T. Lewis, “Vibration Damping Systems for Magnet Girder Assembly at the ESRF”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH109, pp. 1465-1467.
- W. Assmann, “Beam Dynamics in SLC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7B001, pp. 1331-1335.
- A. Chapman-Hatchett, V. Chohan, and T. E. d'Amico, “Tune Measurement for the CERN Proton Synchrotron Booster Rings using DSP in VME”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA146, pp. 2202-2204.
- K. Renuka et al., “Transverse Beam Profile Monitoring using Scintillation Screens for High Energy Ion Beams”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper TUPG022, pp. 183-185.
- K. T. Nguyen, R. F. Schneider, J. R. Smith, and H. S. Uhm, “Relativistic Electron Beam Ion Hose Instability in Beam-Induced Channels”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1096-1099.
- B. Freemire et al., “Electronic brachytherapy replacement of iridium-192”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR49, pp. 3625-3628.
- W. F. Fu et al., “Field Matching of F-D-F, Gap Shaping Magnets for a 2 GeV CW FFA”, in Proc. 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper WEPO001, pp. 200-203.
- S. J. Cooke and B. Levush, “Eigenmodes of Microwave Cavities Containing High-Loss Dielectric Materials”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5C011, pp. 2431-2433.
- R. H. Stokes, F. J. Humphry, J. M. Potter, and P. L. Roybal, “A Spiral-Resonator Radio-Frequency Quadruoole Accelerator Structure”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3530-3533.
- A. K. Krasnykh, “Overview of Driver Technologies for Nanosecond TEM Kickers”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3645-3647.
- T. Yamanaka et al., “Status of the First Commissioning of the Shintake Monitor for ATF2”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP062, pp. 4093-4095.
- J. Callahan, O. Chubenko, L. Cultrera, S. Karkare, and J. Mendez, “Low-temperature and strained-lattice effects on Monte Carlo modeling of spin-polarized photoemission from GaAs”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM050, this conference.
- V. I. Shvedunov, A. N. Ermakov, A. I. Karev, E. A. Knapp, N. P. Sobenin, and W. P. Trower, “70 MeV Electron Racetrack Microtron Commissioning”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH063, pp. 2596-2598.
- A. H. Botha and J. J. Kritzinger, “Design of an RF-System for an Open-Sector Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper C-04, pp. 156-159.
- T. He et al., “Compensation of an elliptically polarizing undulator in the HLS-II storage ring”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB066, this conference.
- V. P. Struev et al., “External Neutron Source for Research Reactor Based on Linear Accelerator and Beryllium Target”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 754-756.
- R. J. Nawrocky, “Magnet Power Supply System for the ISABELLE Half-Cell Prototype”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1358-1361.
- V. V. Smaluk, A. Blednykh, K. Ha, Y. Tian, and X. Yang, “A Method of Local Impedance Measurement by Sine-wave Beam Excitation”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 41-43.
- D. Belver et al., “Overview of the BPM System of the ESS-Bilbao”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD21, pp. 89-91.
- A. K. Krasnykh, A. Brachmann, F.-J. Decker, T. J. Maxwell, and J. Sheppard, “Overview of High Power Vacuum Dry RF Load Designs”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 504-506.
- W. Assmann, “Dispersion in the Presence of Strong Transverse Wakefields”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9V014, pp. 1523-1525.
- C. S. Yang, C.-H. Chang, Y. L. Chu, T. Y. Chung, C.-S. Hwang, and F.-Y. Lin, “Design and Performance of the TPS DC Septum Magnet”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1301-1303.
- K. H??bner, “Accelerator-Based Neutrino Beams”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THZGB002, pp. 30-33.
- P. K. Skowronski et al., “Optics Performance of the LHC During the 2012 Run”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI039, pp. 1433-1435.
- G. E. Krafczyk, C. C. Jensen, H. Pfeffer, and G. J. Warchol, “A Dual Triangle Timing Circuit for Improved Performance of 4-Quadrant H-Bridge Switchers”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP008, pp. 1547-1549.
- M. J. Cola, M. B. Lyons, D. F. Teter, and R. C. Gentzlinger, “Dissimilar Metal Joints for the APT Superconducting Cavity's Cryogenic Plumbing System”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP126, pp. 962-964.
- L.-J. Chen et al., “Design and integration on the test station for PSM of a 300 kW transmitter”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM013, pp. 1002-1004.
- S. Koscielniak and K. Zeno, “Adiabatic capture of longitudinal phase space”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL118, pp. 3387-3390.
- J. Ph. G. L et al., “The Second LHC Long Shutdown (LS2) for the Superconducting Magnets”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 240-243.
- A. Deshpande et al., “Pressure spike in the LBNF absorber core’s gun drilled cooling channel from an accident beam pulse”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPS42, pp. 3830-3832.
- F. A. Heyn and T. K. Khoe, “Design and Performance of a 12-MeV Isochronous Cyclotron”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59A08, pp. 29-39.
- M. Yi and Z. Wang, “Beam dynamics design of the superconducting section of a 100 mA superconducting linac”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper TUPB059, unpublished.
Back to search