Favourites
For Word
[n] F. M. Addesa et al., “The SE-CpFM Detector for the Crystal-Assisted Extraction at CERN-SPS”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 419-422. doi:10.18429/JACoW-IBIC2017-WEPCF04
[n] G. Dugan and B. Ashmanskas, “Modification to the Lattice of the Fermilab Debuncher Ring To Improve the Performance of the Stochastic Cooling Systems”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE022, pp. 1799-1801.
[n] H. Podlech, M. Grieser, R. Repnow, D. Schwalm, and R. von Hahn, “Electrodynamic Calculations of the 4-Rod-RFQ Resonator for the Heidelberg High Current Injector”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH096, pp. 3069-3071.
[n] L. Tang, P. Lu, X. Ma, D. Wang, and R. Wu, “An effective method for crossbar-switch interference suppression based on WPT in beam position measurements of HLS II”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPS112, unpublished.
[n] W. P. Leemans, C. E. Clayton, A. Dyson, C. Joshi, and K. A. Marsh, “Suitability of Tunneling Ionization Produced Plasmas for the Plasma Beat Wave Accelerator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2560-2563.
[n] M. Pedrozzi and Y. Kim, “250 MeV Injector Test Facility for the SwissFEL Project”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC38, pp. 321-324.
[n] W. Wan and C. Steier, “Simulation of the Effect of an In-Vacuum Undulator on the Beam Dynamics of the ALS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE075, pp. 3949-3951.
[n] K. H. Purser, “Some Advances in Negative Ion Technology”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 136-142.
[n] G. Tranquille et al., “The ELENA Electron Cooler”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1236-1238. doi:10.18429/JACoW-IPAC2016-TUPMR006
[n] A. Adelmann et al., “OPAL and Future Directions Towards the Exascale Area”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA081, unpublished.
[n] S. Varnasseri, “Design of a Stripline Kicker for Tune Measurement in SESAME Storage Ring”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA049, pp. 390-392.
[n] B. Haerer et al., “Constraints on the FCC-ee Lattice from the Compatibility with the FCC Hadron Collider”, in Proc. HF'14, Beijing, China, Oct. 2014, paper FRT2A1, pp. 87-90.
[n] W. D. Klotz, “The ESRF Control System; Status and Highlights”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 121-127. doi:10.18429/JACoW-ICALEPCS1991-S03SRD05
[n] P. Michelato, D. Barni, C. Pagani, and G. Penco, “Thermal Properties Measurements Using Laser Flash Technique at Cryogenic Temperature”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH321, pp. 1231-1233.
[n] P. Cohilis and Y. Jongen, “High Beam Intensities for Cyclotron-Based Radioisotope Production”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP075G, pp. 2671-2673.
[n] J. Linz, J. Reich, and P. Wucherer, “Modification of the Centre Region for Better Beam Quality at JULIC”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-15, pp. 279-282.
[n] R. A. Marsh, M. A. Shapiro, and R. J. Temkin, “Metallic Photonic Band Gap Accelerator Structure Experiments and Design”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP151, pp. 2841-2843.
[n] T. Furukawa et al., “Development toward Turn-key Beam Delivery for Therapeutic Operation at HIMAC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH168, pp. 2325-2327.
[n] P. Zhang et al., “The Tuning System for the HIE-ISOLDE High-Beta Quarter Wave Resonator”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP084, pp. 1121-1125.
[n] G. E. Lawler, A. Fukasawa, N. Majernik, and J. B. Rosenzweig, “Temperature Dependent Effects on RF Surface Resistivity”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2540-2543. doi:10.18429/JACoW-IPAC2022-THPOST045
[n] J. M. Kats, “Particle Longitudinal Diffusion Produced by High Frequency Cavity”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1281-1284.
[n] W. Beeckman, Y. Jongen, D. Vandeplassche, and S. Zaremba, “235 MeV Cyclotron for MGH's Northeast Proton Therapy Centre NPTC: Present Status”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP074G, pp. 2650-2652.
[n] N. Yamamoto and N. Nakamura, “Benchmark study of transverse instability driven by the resistive wall impedance in the PF-HLS 2.5 GeV storage ring”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS105, unpublished.
[n] J. Repond, K. Iliakis, M. Schwarz, and E. N. Shaposhnikova, “Simulations of Longitudinal Beam Stabilisation in the CERN SPS With BLonD”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 179-185. doi:10.18429/JACoW-ICAP2018-TUPAF06
For LaTeX
Use Complete Form
For BibTeX
References
- F. M. Addesa et al., “The SE-CpFM Detector for the Crystal-Assisted Extraction at CERN-SPS”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 419-422.
- G. Dugan and B. Ashmanskas, “Modification to the Lattice of the Fermilab Debuncher Ring To Improve the Performance of the Stochastic Cooling Systems”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE022, pp. 1799-1801.
- H. Podlech, M. Grieser, R. Repnow, D. Schwalm, and R. von Hahn, “Electrodynamic Calculations of the 4-Rod-RFQ Resonator for the Heidelberg High Current Injector”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH096, pp. 3069-3071.
- L. Tang, P. Lu, X. Ma, D. Wang, and R. Wu, “An effective method for crossbar-switch interference suppression based on WPT in beam position measurements of HLS II”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS112, this conference.
- W. P. Leemans, C. E. Clayton, A. Dyson, C. Joshi, and K. A. Marsh, “Suitability of Tunneling Ionization Produced Plasmas for the Plasma Beat Wave Accelerator”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2560-2563.
- M. Pedrozzi and Y. Kim, “250 MeV Injector Test Facility for the SwissFEL Project”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC38, pp. 321-324.
- W. Wan and C. Steier, “Simulation of the Effect of an In-Vacuum Undulator on the Beam Dynamics of the ALS”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE075, pp. 3949-3951.
- K. H. Purser, “Some Advances in Negative Ion Technology”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 136-142.
- G. Tranquille et al., “The ELENA Electron Cooler”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1236-1238.
- A. Adelmann et al., “OPAL and Future Directions Towards the Exascale Area”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA081, unpublished.
- S. Varnasseri, “Design of a Stripline Kicker for Tune Measurement in SESAME Storage Ring”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA049, pp. 390-392.
- B. Haerer et al., “Constraints on the FCC-ee Lattice from the Compatibility with the FCC Hadron Collider”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper FRT2A1, pp. 87-90.
- W. D. Klotz, “The ESRF Control System; Status and Highlights”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S03SRD05, pp. 121-127.
- P. Michelato, D. Barni, C. Pagani, and G. Penco, “Thermal Properties Measurements Using Laser Flash Technique at Cryogenic Temperature”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH321, pp. 1231-1233.
- P. Cohilis and Y. Jongen, “High Beam Intensities for Cyclotron-Based Radioisotope Production”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP075G, pp. 2671-2673.
- J. Linz, J. Reich, and P. Wucherer, “Modification of the Centre Region for Better Beam Quality at JULIC”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-15, pp. 279-282.
- R. A. Marsh, M. A. Shapiro, and R. J. Temkin, “Metallic Photonic Band Gap Accelerator Structure Experiments and Design”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP151, pp. 2841-2843.
- T. Furukawa et al., “Development toward Turn-key Beam Delivery for Therapeutic Operation at HIMAC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH168, pp. 2325-2327.
- P. Zhang et al., “The Tuning System for the HIE-ISOLDE High-Beta Quarter Wave Resonator”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP084, pp. 1121-1125.
- G. E. Lawler, A. Fukasawa, N. Majernik, and J. B. Rosenzweig, “Temperature Dependent Effects on RF Surface Resistivity”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2540-2543.
- J. M. Kats, “Particle Longitudinal Diffusion Produced by High Frequency Cavity”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1281-1284.
- W. Beeckman, Y. Jongen, D. Vandeplassche, and S. Zaremba, “235 MeV Cyclotron for MGH's Northeast Proton Therapy Centre NPTC: Present Status”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP074G, pp. 2650-2652.
- N. Yamamoto and N. Nakamura, “Benchmark study of transverse instability driven by the resistive wall impedance in the PF-HLS 2.5 GeV storage ring”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS105, this conference.
- J. Repond, K. Iliakis, M. Schwarz, and E. N. Shaposhnikova, “Simulations of Longitudinal Beam Stabilisation in the CERN SPS With BLonD”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 179-185.
Back to search