Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] W. Booth, E. Blanco Vinuela, B. Bradu, and S. Sourisseau, “Virtual Control Commissioning for a Large Critical Ventilation System: The CMS Cavern Use Case”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 92-98. doi:10.18429/JACoW-ICALEPCS2017-MODPL02
[n] R. Salemme et al., “First Beam Test of Laser Engineered Surface Structures (LESS) at Cryogenic Temperature in CERN SPS Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2616-2619. doi:10.18429/JACoW-IPAC2018-WEPMG005
[n] M. Pezzetti, P. Arpaia, M. Girone, and M. Hubatka, “Active Magnetic Bearings System Upgrade for LHC Cryogenic Cold Compressor, Radiations Mitigation Project (R2E)”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 480-484. doi:10.18429/JACoW-ICALEPCS2015-MOPGF171
[n] M. L. Rivers, “areaDetector: EPICS Software for 2-D Detectors”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1245-1251. doi:10.18429/JACoW-ICALEPCS2017-THDPL03
[n] R. Billen, P. Le Roux, M. Peryt, C. Roderick, and Z. Zaharieva, “Accelerator Data Foundation: How It All Fits Together”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUB001, pp. 61-65.
[n] R. Salemme, V. Baglin, G. Bregliozzi, P. Chiggiato, and R. Kersevan, “Amorphous Carbon Coatings at Cryogenic Temperatures with LHC Type Beams: First Results with the COLDEX Experiment”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3112-3114. doi:10.18429/JACoW-IPAC2015-WEPHA007
[n] G. Wright and R. Igarashi, “EPICS Data Acquisition Software at the CLS”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL009, pp. 142-143.
[n] D. Darvas, E. Blanco Vinuela, and I. Majzik, “A Formal Specification Method for PLC-based Applications”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 907-910. doi:10.18429/JACoW-ICALEPCS2015-WEPGF091
[n] R. Modic, G. Pajor, K. Zagar, L. Medeiros-Romao, R. Salemme, and D. Vandeplassche, “Control System Design Considerations for MYRRHA ADS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3162-3164. doi:10.18429/JACoW-IPAC2014-THPRO115
[n] T. Mooney, “synApps: EPICS-Application Software for Synchrotron Beamlines and Laboratories”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THCOMA02, pp. 106-108.
[n] W. Booth et al., “A Modular Approach to Develop Standardized HVAC Control Systems with UNICOS CPC Framework”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 919-922. doi:10.18429/JACoW-ICALEPCS2015-WEPGF094
[n] A. Bitadze et al., “A Combined On-line Acoustic Flowmeter and Fluorocarbon Coolant Mixture Analyzer for the ATLAS Silicon Tracker”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN038, pp. 969-972.
[n] E. D. Matias et al., “Phase II and III The Next Generation of CLS Beamline Control and Data Acquisition Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU013, pp. 454-457.
[n] B. Copy, O. O. Andreassen, Ph. Gayet, M. Labrenz, H. Milcent, and F. Piccinelli, “Scalable Web Broadcasting for Historical Industrial Control Data”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 790-793. doi:10.18429/JACoW-ICALEPCS2015-WEPGF042
[n] M. Quispe, J. Casas, C. Colldelram, G. Peña Calurano, M. Sanchez Hidalgo, and B. de Abreu Francisco, “Improving helium sustainability: current performance and upgrade of the ALBA helium liquefaction facility”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7086, unpublished.
[n] M. H. Yoon and J. E. Han, “Optimization of a Soft X-Ray SASE-FEL Parameters at Pohang Accelerator Laboratory”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOPOS38, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- W. Booth, E. Blanco Vinuela, B. Bradu, and S. Sourisseau, “Virtual Control Commissioning for a Large Critical Ventilation System: The CMS Cavern Use Case”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 92-98.
- R. Salemme et al., “First Beam Test of Laser Engineered Surface Structures (LESS) at Cryogenic Temperature in CERN SPS Accelerator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2616-2619.
- M. Pezzetti, P. Arpaia, M. Girone, and M. Hubatka, “Active Magnetic Bearings System Upgrade for LHC Cryogenic Cold Compressor, Radiations Mitigation Project (R2E)”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 480-484.
- M. L. Rivers, “areaDetector: EPICS Software for 2-D Detectors”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1245-1251.
- R. Billen, P. Le Roux, M. Peryt, C. Roderick, and Z. Zaharieva, “Accelerator Data Foundation: How It All Fits Together”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUB001, pp. 61-65.
- R. Salemme, V. Baglin, G. Bregliozzi, P. Chiggiato, and R. Kersevan, “Amorphous Carbon Coatings at Cryogenic Temperatures with LHC Type Beams: First Results with the COLDEX Experiment”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3112-3114.
- G. Wright and R. Igarashi, “EPICS Data Acquisition Software at the CLS”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL009, pp. 142-143.
- D. Darvas, E. Blanco Vinuela, and I. Majzik, “A Formal Specification Method for PLC-based Applications”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 907-910.
- R. Modic, G. Pajor, K. Zagar, L. Medeiros-Romao, R. Salemme, and D. Vandeplassche, “Control System Design Considerations for MYRRHA ADS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3162-3164.
- T. Mooney, “synApps: EPICS-Application Software for Synchrotron Beamlines and Laboratories”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THCOMA02, pp. 106-108.
- W. Booth et al., “A Modular Approach to Develop Standardized HVAC Control Systems with UNICOS CPC Framework”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 919-922.
- A. Bitadze et al., “A Combined On-line Acoustic Flowmeter and Fluorocarbon Coolant Mixture Analyzer for the ATLAS Silicon Tracker”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN038, pp. 969-972.
- E. D. Matias et al., “Phase II and III The Next Generation of CLS Beamline Control and Data Acquisition Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMU013, pp. 454-457.
- B. Copy, O. O. Andreassen, Ph. Gayet, M. Labrenz, H. Milcent, and F. Piccinelli, “Scalable Web Broadcasting for Historical Industrial Control Data”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 790-793.
- M. Quispe, J. Casas, C. Colldelram, G. Peña Calurano, M. Sanchez Hidalgo, and B. de Abreu Francisco, “Improving helium sustainability: current performance and upgrade of the ALBA helium liquefaction facility”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7086, this conference.
- M. H. Yoon and J. E. Han, “Optimization of a Soft X-Ray SASE-FEL Parameters at Pohang Accelerator Laboratory”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper MOPOS38, pp. XX-XX.
Back to search