Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. D. Machalek, E. A. Meyer, and L. S. Price, “The FMIT Accelerator Vacuum System”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3015-3018.
[n] W. Van Herck, B. Bauvir, and G. Ferro, “Automated Operation of ITER Using Behavior Tree Semantics”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 628-630. doi:10.18429/JACoW-ICALEPCS2021-WEPV006
[n] M. A. Furman and A. A. Zholents, “Incoherent Effects Driven by the Electron Cloud”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP130, pp. 1794-1796.
[n] D. N. Shatilov and A. A. Zholents, “Lifetime and Tail Simulations for Beam-Beam Effects in PEP-II B Factory”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAP05, pp. 2892-2894.
[n] M. E. Conde, K.-J. Kim, S. Chattopadhyay, A. T. Young, K.-N. Leung, and S.-I. Kwon, “Electron Quantum Yields from a Barium Photocathode Illuminated with Polarized Light”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3042-3045.
[n] D. Christian et al., “Results from a helium flowmeter that measures SRF cavity Q0s in situ”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper TUP76, unpublished.
[n] K. Deitrick, “Microbunching gain evaluation of bunch compressor designs”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS106, unpublished.
[n] M. Yang, F. S. Chen, W. Kang, X. J. Sun, and Y. S. Zhu, “CEPC Collider and Booster Magnets”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 247. doi:10.18429/JACoW-eeFACT2018-WEOBB05
[n] P. P. Goryl, M. Liszcz, A. Gotz, L. Pivetta, and V. H. Hardion, “Towards Specification of Tango V10”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 330. doi:10.18429/JACoW-ICALEPCS2019-MOPHA051
[n] T. Garvey et al., “First Beam Tests of the TTF Injector”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4W003, pp. 2823-2825.
[n] J. Beveridge et al., “Initial Operating Experience with the TRIUMF 300 keV H- Injection System”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1707-1711.
[n] G. A. Krafft, C. H. Kim, and L. Smith, “The LBL Neutralized Beam Focusing Experiment”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2486-2489.
[n] J. John et al., “Harmonic Cascade FEL Designs for LUX, a Facilty for Ultrafast X-ray Science”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS51, pp. XX-XX.
[n] S. Karabekyan, S. Abeghyan, W. Freund, and L. Froehlich, “Automation of the Undulator Middle Plane Alignment Relative to the Electron Beam Position Using the K-Monochromator”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 374. doi:10.18429/JACoW-ICALEPCS2019-MOPHA069
[n] J. Juanhuix and M. Traveria, “Magnetic Design and light characteristics of the LLS Undulators”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP23G, pp. 2252-2254.
[n] A. Faltens and S. S. Rosenblum, “Investigation of Re-X Glass Ceramic for Accelerator Insulating Columns”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3131-3134.
[n] J. Kang et al., “Design Study of the 30 MeV Cyclotron Magnet”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS078, pp. 2559-2561.
[n] M. Napolitano et al., “Status of the High Current Proton Accelerator for the TRASCO Program”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THBLA002, pp. 251-253.
[n] Y.-C. Du, Q. Du, W.-H. Huang, Y. Lin, C.-X. Tang, and S. Zheng, “Preliminary Experiment of the Thomson Scattering X-ray Source at Tsinghua University”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS044, pp. 3386-3388.
[n] T. Bass, E. Johnson, M. Fraser, P. A. Arrutia Sota, S. Gibson, and Y. Dutheil, “Benchmarking simulations of slow extraction driven by RF transverse excitation at the CERN Proton Synchrotron”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2487-2490. doi:10.18429/JACoW-IPAC2023-TUPM116
[n] J. Kewisch, V. Ptitsin, J. Rose, and J. Wei, “RHIC Longitudinal Parameter Revision”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP12C, pp. 377-379.
[n] C. Adolphsen and T. Slaton, “Beam Trajectory Jitter in the SLC Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAB08, pp. 3034-3036.
[n] A. Hoffmann et al., “Optimization of the THz SASE FEL at PITZ”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL011, unpublished.
[n] S. H. Shin, E.-S. Kim, and M. Yoon, “Beam-optics Analysis and Periodicity Restoration in the Storage Ring of the Pohang Light Source”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS048, pp. 3395-3397.
[n] D. L. Hall et al., “Nb3Sn Cavities: Material Characterization and Coating Process Optimization”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUBA04, pp. 501-504.
[n] W. Chou, “Overview of proton driver studies for neutrino and muon factories”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUAY01, pp. 64-68.
[n] G. M. Gammel, A. W. Maschke, and R. M. Mobley, “Bunched Beam Neutralization”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3029-3031.
[n] H. O. Moser and C. Z. Diao, “Analytical and Numerical Study of Superconducting Miniundulators”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP14019, pp. XX-XX.
[n] A. L. Hillman, S. J. Pasky, N. Sereno, R. Soliday, and J. Wang, “Injector Power Supplies Reliability Improvements at the Advanced Photon Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE070, pp. 3804-3806.
[n] R. J. Macek et al., “Overview of Progress on the Improvement Projects for the LANSCE Accelerator and Target Facilities”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W021, pp. 1159-1161.
[n] C. Hovater, H. Dong, J. Musson, G. Lahti, T. Plawski, and A. Hofler, “A New RF System for the CEBAF Normal Conducting Cavities”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP79, pp. 456-458.
[n] Y. Leng and L. Hoff, “Analog I/O Module Test System Based on EPICS CA Protocol and ActiveX CA Interface”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP529, pp. XX-XX.
[n] P. Niknejadi et al., “FLASHforward Findings for the EuPRAXIA Design Study and the Next-Generation of Compact Accelerator Facilities”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3619-3623. doi:10.18429/JACoW-IPAC2019-THPGW019
[n] T. Birke, D. Faulbaum, M. G. Giacchini, D. Herrend?Ârfer, P. Stange, and R. Lange, “BESSY Control System Administration and Analysis Tools”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB28, pp. 671-673.
[n] S. Hansen, K. N. Henrichsen, and M. de Jong, “Extension of the CERN ISR Energy by Acceleration of Stacked Beams”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 805-807.
[n] H. Hähnel, G. Dollinger, J. Sonpar, M. Mayerhofer, and R. Helm, “A novel test cavity setup for surface conductivity measurements of additive manufacturing samples”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 363-366. doi:10.18429/JACoW-LINAC2024-TUPB019
[n] A. Devred et al., “First Computation of Parasitic Fields in LHC Dipole Magnet Interconnects”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS101, pp. 2613-2615.
[n] J. X. Wu et al., “The BPM Measurement System in HIRFL-CSR”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD11, pp. 309-311.
[n] J. G. Hwang and T. K. Yang, “Development of Large Aperture Faraday-Cup for LEBT of KHIMA.”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 241-243. doi:10.18429/JACoW-IPAC2016-MOPMR009
[n] M. Burns et al., “A Flat-Cathode Thermionic Injector for the PHERMEX Radiographic Facility”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3055-3058.
[n] H. Heydari and T. Tille, “Reason for Free Electrons from the Surface of Ferroelectrics with a Metal Lattice Structure”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W037, pp. 2784-2786.
[n] M. R. Teague and S. S. Yu, “Numerical Simulation of Secondary Electron Orbits Near an Electron Beam Propagating in a Low Pressure Gas”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3512-3515.
[n] Y. Hashimoto et al., “Development of a Non-Destructive Beam Profile Monitor Using a Gas Sheet”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH308, pp. 1631-1633.
[n] G. Decker, J. Galayda, S. Krinsky, and L. Solomon, “Experience with Phase II Insertion Devices in the X-Ray Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 470-473.
[n] P. Goudket et al., “Superconducting Thin Film RF Measurements”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3856-3858. doi:10.18429/JACoW-IPAC2018-THPAL086
[n] N. Dikansky, V. Parkhomchuk, A. Skrinsky, and V. Yakimenko, “Novosibirsk Tau-Charm Factory Design Study”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR11, pp. 819-821.
[n] C. W. Schmidt, V. Dudnikov, and J. A. MacLachlan, “Measurement of Small Radius Gradient Magnets Using Ion Beams”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH015, pp. 3251-3253.
[n] J.-L. Pellegrin and H. Schwarz, “Control Electronics of the PEP RF System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2320-2323.
[n] B. S. Lee et al., “Inductive Adder Kicker Modulator for DARHT-II”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUC10, pp. 512-514.
[n] E. Syresin et al., “Electron Cooling in NICA Acceleration Complex”, in Proc. COOL2023, Montreux, Switzerland, Oct. 2023, pp. 109-113. doi:10.18429/JACoW-COOL2023-FRPAM1R2
[n] S. Redaelli, O. Aberle, R. W. Assmann, A. M. Masi, and G. Spiezia, “Detecting Impacts of Proton Beams on the LHC Collimators with Vibration and Sound Measurements”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP006, pp. 1018-1020.
[n] J. Rodríguez Pérez et al., “Optimization of a multichannel solid state plasma for laser wakefield acceleration with realistic laser parameters using a Bayesian algorithm”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1552-1555. doi:10.18429/JACoW-IPAC2025-TUPS054
[n] I. Gusdal et al., “The University of Manitoba Cyclotron Facility”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2724-2727.
[n] K. Chen et al., “An Application of Cyclotron Beam to the Study of Radiation Damage in Metals”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper K-17, pp. 657-659.
[n] P. Michelato, S. Pace, M. Re, and P. Sarta, “Operational Experience of the K800 Cyclotron Vacuum System at L.N. S.”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2476-2479.
[n] M. Martinello et al., “Advancement in the Understanding of the Field and Frequency Dependent Microwave Surface Resistance of Niobium”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 364-367. doi:10.18429/JACoW-SRF2017-TUYAA02
[n] M. Kuntzsch, S. J. Burger, R. Schurig, and T. Weber, “Long Term Investigation of the Degradation of Coaxial Cables”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 552-555. doi:10.18429/JACoW-IBIC2018-THOB03
[n] A. Faltens, M. Firth, D. Keefe, and S. S. Rosenblum, “Long-Pulse Induction Acceleration of Heavy Ions”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3669-3672.
[n] K. Fujii et al., “25-70 MeV Variable Energy Cyclotron for Radio-Isotope Production”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper K-08, pp. 626-629.
[n] K. Yonehara, “Development of Helical Cooling Channels for Muon Colliders”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper TUA1MCIO03, pp. 81-85.
[n] Y. Liu et al., “Experimental Observation of IFEL Micro-Bunching Using Coherent Transition Radiation”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3PC003, pp. XX-XX.
[n] K. N. Nii et al., “Improvement of Temperature Control During Nb 9-Cell SRF Cavity Vertical Electro-Polishing (VEP) and Progress of VEP Quality”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB098, pp. 381-384.
[n] S. Boogert and L. Nevay, “Python FLUKA BeamLine (pyflubl), a python library to create FLUKA simulations of accelerators”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPS23, unpublished.
[n] N. J. Diserens, “Progress in the Development of a 3D Finite Element Computer Program to Calculate Space and Image Charge Effects in RF Quadrupoles”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2501-2504.
[n] C. Bracco and F. M. Velotti, “Studies on Pre-Computation of SPS-to-LHC Transfer Line Corrections”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1711-1714. doi:10.18429/JACoW-IPAC2022-WEPOST014
[n] M. J. Syphers et al., “Observations of Strong Transverse Coupling in the Tevatron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAP028, pp. 2029-2031.
[n] C. Gerth et al., “Layout of the Laser Heater for FLASH2020+”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1647-1650. doi:10.18429/JACoW-IPAC2021-TUPAB111
[n] W. Shields, S. Boogert, and L. Nevay, “Start-to-end tracking of therapeutic ion beams in BDSIM”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5075-5078. doi:10.18429/JACoW-IPAC2023-THPM084
[n] M. Liepe and S. Posen, “Nb3Sn for SRF Application”, in Proc. SRF'13, Paris, France, Sep. 2013, paper WEIOA04, pp. 773-776.
[n] J. T. Maniscalco et al., “LCLS-II-HE Vertical Acceptance Testing Plans”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 291. doi:10.18429/JACoW-SRF2021-MOPCAV013
[n] Y. Wu, V. N. Litvinenko, and J. M. J. Madey, “Lattice and Dynamic Aperture of the Duke FEL Storage Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 218-221.
[n] Z. B. du Toit, S. J. Burger, P. J. Celliers, E. P. Conard, J. J. Kritzinger, and L. M. M. Roels, “Operating Experience with the Light-Ion Injector of the NAC”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper B-21, pp. 109-112.
[n] M. A. Shapiro, G. Shvets, J. R. Sirigiri, and R. J. Temkin, “3D Metallic Lattices for Accelerator Applications”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAE023, pp. 1838-1840.
[n] A. L. Allen et al., “Measurements of Reduced Corkscrew Motion on the ETA-II Linear Induction Accelerator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3094-3097.
[n] M. S. de Jong, “Industrial Involvement in the Construction of Synchrotron Light Sources”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEILH04, pp. 206-210.
[n] C. T. Rogers and P. Snopok, “Wedge Absorber Simulations For The Muon Ionization Cooling Experiment”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper TUA2MCCO03, pp. 94-97.
[n] M. Olivo, D. A. Bachman, D. S. McDonald, K.-N. Leung, P. R. Herz, and L. T. Perkins, “The Positive Hydrogen Ion Beam Production by an RF-Driven Multicusp Source”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3190-3193.
[n] G. Sinha, A. Kumar, A. Mishra, and G. Singh, “Effect of Magnetic Field Coupling On INDUS-2 Quadrupole Magnets”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA039, pp. 378-380.
[n] R. Pompili, “Guiding of charged particle beams in curved plasma-discharge capillaries”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THXD1, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- M. D. Machalek, E. A. Meyer, and L. S. Price, “The FMIT Accelerator Vacuum System”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3015-3018.
- W. Van Herck, B. Bauvir, and G. Ferro, “Automated Operation of ITER Using Behavior Tree Semantics”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 628-630.
- M. A. Furman and A. A. Zholents, “Incoherent Effects Driven by the Electron Cloud”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP130, pp. 1794-1796.
- D. N. Shatilov and A. A. Zholents, “Lifetime and Tail Simulations for Beam-Beam Effects in PEP-II B Factory”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAP05, pp. 2892-2894.
- M. E. Conde, K.-J. Kim, S. Chattopadhyay, A. T. Young, K.-N. Leung, and S.-I. Kwon, “Electron Quantum Yields from a Barium Photocathode Illuminated with Polarized Light”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3042-3045.
- D. Christian et al., “Results from a helium flowmeter that measures SRF cavity Q0s in situ”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper TUP76, unpublished.
- K. Deitrick, “Microbunching gain evaluation of bunch compressor designs”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS106, unpublished.
- M. Yang, F. S. Chen, W. Kang, X. J. Sun, and Y. S. Zhu, “CEPC Collider and Booster Magnets”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 247.
- P. P. Goryl, M. Liszcz, A. Gotz, L. Pivetta, and V. H. Hardion, “Towards Specification of Tango V10”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 330.
- T. Garvey et al., “First Beam Tests of the TTF Injector”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4W003, pp. 2823-2825.
- J. Beveridge et al., “Initial Operating Experience with the TRIUMF 300 keV H- Injection System”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1707-1711.
- G. A. Krafft, C. H. Kim, and L. Smith, “The LBL Neutralized Beam Focusing Experiment”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2486-2489.
- J. John et al., “Harmonic Cascade FEL Designs for LUX, a Facilty for Ultrafast X-ray Science”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THPOS51, pp. XX-XX.
- S. Karabekyan, S. Abeghyan, W. Freund, and L. Froehlich, “Automation of the Undulator Middle Plane Alignment Relative to the Electron Beam Position Using the K-Monochromator”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 374.
- J. Juanhuix and M. Traveria, “Magnetic Design and light characteristics of the LLS Undulators”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP23G, pp. 2252-2254.
- A. Faltens and S. S. Rosenblum, “Investigation of Re-X Glass Ceramic for Accelerator Insulating Columns”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3131-3134.
- J. Kang et al., “Design Study of the 30 MeV Cyclotron Magnet”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS078, pp. 2559-2561.
- M. Napolitano et al., “Status of the High Current Proton Accelerator for the TRASCO Program”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THBLA002, pp. 251-253.
- Y.-C. Du, Q. Du, W.-H. Huang, Y. Lin, C.-X. Tang, and S. Zheng, “Preliminary Experiment of the Thomson Scattering X-ray Source at Tsinghua University”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS044, pp. 3386-3388.
- T. Bass, E. Johnson, M. Fraser, P. A. Arrutia Sota, S. Gibson, and Y. Dutheil, “Benchmarking simulations of slow extraction driven by RF transverse excitation at the CERN Proton Synchrotron”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM116, pp. 2487-2490.
- J. Kewisch, V. Ptitsin, J. Rose, and J. Wei, “RHIC Longitudinal Parameter Revision”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP12C, pp. 377-379.
- C. Adolphsen and T. Slaton, “Beam Trajectory Jitter in the SLC Linac”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAB08, pp. 3034-3036.
- A. Hoffmann et al., “Optimization of the THz SASE FEL at PITZ”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL011, unpublished.
- S. H. Shin, E.-S. Kim, and M. Yoon, “Beam-optics Analysis and Periodicity Restoration in the Storage Ring of the Pohang Light Source”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS048, pp. 3395-3397.
- D. L. Hall et al., “Nb3Sn Cavities: Material Characterization and Coating Process Optimization”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUBA04, pp. 501-504.
- W. Chou, “Overview of proton driver studies for neutrino and muon factories”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper TUAY01, pp. 64-68.
- G. M. Gammel, A. W. Maschke, and R. M. Mobley, “Bunched Beam Neutralization”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3029-3031.
- H. O. Moser and C. Z. Diao, “Analytical and Numerical Study of Superconducting Miniundulators”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP14019, pp. XX-XX.
- A. L. Hillman, S. J. Pasky, N. Sereno, R. Soliday, and J. Wang, “Injector Power Supplies Reliability Improvements at the Advanced Photon Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE070, pp. 3804-3806.
- R. J. Macek et al., “Overview of Progress on the Improvement Projects for the LANSCE Accelerator and Target Facilities”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5W021, pp. 1159-1161.
- C. Hovater, H. Dong, J. Musson, G. Lahti, T. Plawski, and A. Hofler, “A New RF System for the CEBAF Normal Conducting Cavities”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP79, pp. 456-458.
- Y. Leng and L. Hoff, “Analog I/O Module Test System Based on EPICS CA Protocol and ActiveX CA Interface”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP529, pp. XX-XX.
- P. Niknejadi et al., “FLASHforward Findings for the EuPRAXIA Design Study and the Next-Generation of Compact Accelerator Facilities”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3619-3623.
- T. Birke, D. Faulbaum, M. G. Giacchini, D. Herrend?Ârfer, P. Stange, and R. Lange, “BESSY Control System Administration and Analysis Tools”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB28, pp. 671-673.
- S. Hansen, K. N. Henrichsen, and M. de Jong, “Extension of the CERN ISR Energy by Acceleration of Stacked Beams”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 805-807.
- H. Hähnel, G. Dollinger, J. Sonpar, M. Mayerhofer, and R. Helm, “A novel test cavity setup for surface conductivity measurements of additive manufacturing samples”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 363-366.
- A. Devred et al., “First Computation of Parasitic Fields in LHC Dipole Magnet Interconnects”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS101, pp. 2613-2615.
- J. X. Wu et al., “The BPM Measurement System in HIRFL-CSR”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD11, pp. 309-311.
- J. G. Hwang and T. K. Yang, “Development of Large Aperture Faraday-Cup for LEBT of KHIMA.”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 241-243.
- M. Burns et al., “A Flat-Cathode Thermionic Injector for the PHERMEX Radiographic Facility”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3055-3058.
- H. Heydari and T. Tille, “Reason for Free Electrons from the Surface of Ferroelectrics with a Metal Lattice Structure”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6W037, pp. 2784-2786.
- M. R. Teague and S. S. Yu, “Numerical Simulation of Secondary Electron Orbits Near an Electron Beam Propagating in a Low Pressure Gas”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3512-3515.
- Y. Hashimoto et al., “Development of a Non-Destructive Beam Profile Monitor Using a Gas Sheet”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH308, pp. 1631-1633.
- G. Decker, J. Galayda, S. Krinsky, and L. Solomon, “Experience with Phase II Insertion Devices in the X-Ray Ring”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 470-473.
- P. Goudket et al., “Superconducting Thin Film RF Measurements”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3856-3858.
- N. Dikansky, V. Parkhomchuk, A. Skrinsky, and V. Yakimenko, “Novosibirsk Tau-Charm Factory Design Study”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR11, pp. 819-821.
- C. W. Schmidt, V. Dudnikov, and J. A. MacLachlan, “Measurement of Small Radius Gradient Magnets Using Ion Beams”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH015, pp. 3251-3253.
- J.-L. Pellegrin and H. Schwarz, “Control Electronics of the PEP RF System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2320-2323.
- B. S. Lee et al., “Inductive Adder Kicker Modulator for DARHT-II”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUC10, pp. 512-514.
- E. Syresin et al., “Electron Cooling in NICA Acceleration Complex”, in Proc. 14th International Workshop on Beam Cooling and Related Topics (COOL2023), Montreux, Switzerland, Oct. 2023, paper FRPAM1R2, pp. 109-113.
- S. Redaelli, O. Aberle, R. W. Assmann, A. M. Masi, and G. Spiezia, “Detecting Impacts of Proton Beams on the LHC Collimators with Vibration and Sound Measurements”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP006, pp. 1018-1020.
- J. Rodríguez Pérez et al., “Optimization of a multichannel solid state plasma for laser wakefield acceleration with realistic laser parameters using a Bayesian algorithm”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS054, pp. 1552-1555.
- I. Gusdal et al., “The University of Manitoba Cyclotron Facility”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2724-2727.
- K. Chen et al., “An Application of Cyclotron Beam to the Study of Radiation Damage in Metals”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper K-17, pp. 657-659.
- P. Michelato, S. Pace, M. Re, and P. Sarta, “Operational Experience of the K800 Cyclotron Vacuum System at L.N. S.”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2476-2479.
- M. Martinello et al., “Advancement in the Understanding of the Field and Frequency Dependent Microwave Surface Resistance of Niobium”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 364-367.
- M. Kuntzsch, S. J. Burger, R. Schurig, and T. Weber, “Long Term Investigation of the Degradation of Coaxial Cables”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 552-555.
- A. Faltens, M. Firth, D. Keefe, and S. S. Rosenblum, “Long-Pulse Induction Acceleration of Heavy Ions”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3669-3672.
- K. Fujii et al., “25-70 MeV Variable Energy Cyclotron for Radio-Isotope Production”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper K-08, pp. 626-629.
- K. Yonehara, “Development of Helical Cooling Channels for Muon Colliders”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper TUA1MCIO03, pp. 81-85.
- Y. Liu et al., “Experimental Observation of IFEL Micro-Bunching Using Coherent Transition Radiation”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3PC003, pp. XX-XX.
- K. N. Nii et al., “Improvement of Temperature Control During Nb 9-Cell SRF Cavity Vertical Electro-Polishing (VEP) and Progress of VEP Quality”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB098, pp. 381-384.
- S. Boogert and L. Nevay, “Python FLUKA BeamLine (pyflubl), a python library to create FLUKA simulations of accelerators”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS23, unpublished.
- N. J. Diserens, “Progress in the Development of a 3D Finite Element Computer Program to Calculate Space and Image Charge Effects in RF Quadrupoles”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2501-2504.
- C. Bracco and F. M. Velotti, “Studies on Pre-Computation of SPS-to-LHC Transfer Line Corrections”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1711-1714.
- M. J. Syphers et al., “Observations of Strong Transverse Coupling in the Tevatron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAP028, pp. 2029-2031.
- C. Gerth et al., “Layout of the Laser Heater for FLASH2020+”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1647-1650.
- W. Shields, S. Boogert, and L. Nevay, “Start-to-end tracking of therapeutic ion beams in BDSIM”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM084, pp. 5075-5078.
- M. Liepe and S. Posen, “Nb3Sn for SRF Application”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper WEIOA04, pp. 773-776.
- J. T. Maniscalco et al., “LCLS-II-HE Vertical Acceptance Testing Plans”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 291.
- Y. Wu, V. N. Litvinenko, and J. M. J. Madey, “Lattice and Dynamic Aperture of the Duke FEL Storage Ring”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 218-221.
- Z. B. du Toit, S. J. Burger, P. J. Celliers, E. P. Conard, J. J. Kritzinger, and L. M. M. Roels, “Operating Experience with the Light-Ion Injector of the NAC”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper B-21, pp. 109-112.
- M. A. Shapiro, G. Shvets, J. R. Sirigiri, and R. J. Temkin, “3D Metallic Lattices for Accelerator Applications”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAE023, pp. 1838-1840.
- A. L. Allen et al., “Measurements of Reduced Corkscrew Motion on the ETA-II Linear Induction Accelerator”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3094-3097.
- M. S. de Jong, “Industrial Involvement in the Construction of Synchrotron Light Sources”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEILH04, pp. 206-210.
- C. T. Rogers and P. Snopok, “Wedge Absorber Simulations For The Muon Ionization Cooling Experiment”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper TUA2MCCO03, pp. 94-97.
- M. Olivo, D. A. Bachman, D. S. McDonald, K.-N. Leung, P. R. Herz, and L. T. Perkins, “The Positive Hydrogen Ion Beam Production by an RF-Driven Multicusp Source”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3190-3193.
- G. Sinha, A. Kumar, A. Mishra, and G. Singh, “Effect of Magnetic Field Coupling On INDUS-2 Quadrupole Magnets”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA039, pp. 378-380.
- R. Pompili, “Guiding of charged particle beams in curved plasma-discharge capillaries”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THXD1, unpublished.
Back to search