Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Li, J. V. Conway, X. Liu, and M. A. Palmer, “Electron Cloud Diagnostic Chambers with Various EC-suppression Coatings”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI088, pp. 3496-3498.
[n] L. Liu et al., “Status of Sirius – a New Brazilian Synchrotron Light Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUODA02, pp. 931-933.
[n] F. H. de S?í, H. O. C. Duarte, L. Liu, N. Milas, and X. R. Resende, “Study of Collective Beam Instabilities for Sirius”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1653-1655. doi:10.18429/JACoW-IPAC2014-TUPRI041
[n] L. Liu, X. R. Resende, A. R. D. Rodrigues, and F. H. de S?í, “A New Booster Synchrotron for the Sirius Project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1959-1961. doi:10.18429/JACoW-IPAC2014-WEPRO009
[n] G. X. Xia, B. C. Jiang, and L. G. Liu, “Simulation of the Fast Ion Instability in SSRF Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD030, pp. 1991-1993.
[n] J. Y. Liu et al., “Coherent Harmonic Generation Experiment on Hefei Synchrotron Radiation Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB072, pp. 968-970.
[n] M. Pekeler et al., “Industrial Production of Turn Key Superconducting Accelerator Modules for High Current Storage Rings”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH166, pp. 1172-1174.
[n] G. Benedetti, D. Einfeld, Z. Mart?¡, and M. Mu??oz, “Beam Optics Measurements During the Commissioning of the ALBA Booster”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA056, pp. 2612-2614.
[n] R. D. Kephart, J. E. Anderson, C. A. Cooper, S. Henderson, and C. W. Schmidt, “The Illinois Accelerator Research Center”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEZB1, pp. 765-769.
[n] J. Feuchtwanger et al., “Status of the Ion Sources at ESS-Bilbao”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC030, pp. 1227-1229.
[n] V. M. Arrieta and S. R. McNeal, “Economical Manufacture of Seamless High-Purity Niobium”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO065, pp. 555-557.
[n] T. Yanagisawa, H. Hara, K. Kanaoka, K. Okihira, and K. Sennyu, “Development for Mass Production of Superconducting Cavity by MHI”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2876-2878. doi:10.18429/JACoW-IPAC2015-WEPMA048
[n] J. R. Roensch et al., “Investigations of the Longitudinal Phase Space at PITZ”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS103, pp. 3517-3519.
[n] L. G. Liu, “Linear Optics Calibrations for the SSRF Storage Ring Based on COD”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP028, pp. 4366-4368.
[n] H. W. Zhao et al., “An Advanced Superconducting Ecr Ion Source Secral At Imp: First Results And Operation At 18 GHz”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 271-276.
[n] J. J. Back et al., “Commissioning of the Low Energy Beam Transport of the Front End Test Stand”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC078, pp. 648-650.
[n] E. Bravin et al., “Beam Instrumentation for the HIE-ISOLDE Linac at CERN”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR048, pp. 891-893.
[n] R. B. Turner and J. Ungrin, “Brazing Techniques and Alloys for Accelerator RF Components”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B15, pp. 77-79.
[n] H. Mizuno et al., “RF High Power Tests of the X-Band Windows in the TWR”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-43, pp. 466-468.
[n] M. de Jong, “Overview of New Light Sources”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPA002, pp. 220-223.
[n] J. V. Conway, Y. Li, and M. A. Palmer, “The Conceptual Design of a Vacuum System for the ILC Damping Rings Incorporating Electron Cloud Mitigation Techniques”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR062, pp. 1960-1962.
[n] R. Enparantza, F. J. Bermejo, J. Lucas, and L. Uriarte, “Baseline Design of the ESS Bilbao Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP080, pp. 2704-2706.
[n] Z. W. Li, M. Breese, E. P. Chew, C. Diao, M. Hua, and A. W. Wong, “A Review of 14 Years of Operation of Helios2 at SSLS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA054, pp. 199-201.
[n] Y. Yousefi Sigari, D. Bertwistle, and M. J. Boland, “Vertical Phase Space Measurement Progress at Canadian Light Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 963-965. doi:10.18429/JACoW-IPAC2021-MOPAB310
[n] M. R. Shubaly, “Ion Source Development and Injector Design for ZEBRA”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper G204, pp. 251-253.
[n] M. Peiniger, C. Piel, H. Vogel, and P. vom Stein, “A 100 MeV Injector Linac for the Swiss Light Source Supplied by Industry”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA56, pp. 3510-3512.
[n] X. He, B. Deng, J. Lei, C. Meng, and S. Pei, “Development of Flexible Waveguide for High Power High Vacuum Applications in S-band”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2909-2911. doi:10.18429/JACoW-IPAC2019-WEPRB046
[n] M. P. Cox, S. Bryan, B. F. Macdonald, and H. S. Shiers, “Vacuum Performance of the Diamond Light Source In-vacuum Insertion Devices”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC007, pp. 1995-1997.
[n] M. Pekeler et al., “Fabrication, Test and First Operation of Superconducting Accelerator Modules for Storage Rings”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB090, pp. 1410-1412.
[n] R. Tanner, S. Hu, G. Wright, and E. D. Matias, “Integrating Siemens PLCs and EPICS over Ethernet at the Canadian Light Source”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO001, pp. 31-33.
[n] L. Muguira et al., “Automatic Tuner Unit Design, Simulation and Measurement for Automatic Operation of the RF System in the ESS-Bilbao H+ Ion Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS023, pp. 3469-3471.
[n] M. Korostelev, A. F. Grant, J. Lucas, O. B. Malyshev, and A. Wolski, “Beam Coupling Impedance in the ILC Damping Rings”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP056, pp. 670-672.
[n] M. Pekeler, S. Bauer, B. Griep, C. Piel, H. Vogel, and P. vom Stein, “Series Production of Accelerator Cavities for the Spallation Neutron Source”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO008, pp. 2694-2696.
[n] J. Wang, I. A. Abid, R. T. Keane, and G. S. Sprau, “Preliminary Designs and Test Results of Bipolar Power Supplies for APS Upgrade Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2381-2383. doi:10.18429/JACoW-IPAC2018-WEPMF008
[n] M. Attal et al., “Commissioning of SESAME Booster”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2880-2882. doi:10.18429/JACoW-IPAC2016-WEPOW024
[n] S. Varnasseri et al., “Design and Fabrication of the Stripline BPM at ESS-Bilbao”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA31, pp. 122-124.
[n] G. Wright et al., “Recent Changes to Beamline Software at the Canadian Light Source”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC100, pp. 813-815.
[n] G. Benedetti, D. Einfeld, J. Marcos, M. Mu??oz, and M. Pont, “ALBA Booster Settings for an Optimized Performance”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP027, pp. 3756-3758.
[n] L. Dallin, I. Blomqvist, D. Lowe, M. Silzer, and M. de Jong, “The Canadian Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOPA001, pp. 220-223.
[n] P. vom Stein, M. Peiniger, M. Pekeler, C. Piel, and H. Vogel, “RF Activities on Cavities and Turn Key Accelerator Systems at ACCEL”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH092, pp. 984-986.
[n] J. Lei et al., “RF Study And Cold Test of an S-band Spherical Cavity Pulse Compressor”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2429-2431. doi:10.18429/JACoW-IPAC2018-WEPMF033
[n] A. S. Setty et al., “Commissioning of the 100 MeV Preinjector for the ALBA Synchrotron”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP088, pp. 4984-4986.
[n] F. Sanchez Galan et al., “Optimising Machine-Experiment Interventions in HL-LHC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3540-3543. doi:10.18429/JACoW-IPAC2017-WEPVA114
[n] B. G?Ñlnander et al., “Status of Design Work Towards an Electron Cooler for HESR”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper THAP10, pp. 182-186.
[n] Y. Kitagawa et al., “Inverse Compton Scattering by Laser Accelerated Electrons and its Application to Standoff Detection of Hidden Objects”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD054, pp. 4404-4406.
[n] S. O. Schriber, L. W. Funk, S. B. Hodge, and R. M. Hutcheon, “Experimental Measurements on a 25 MeV Reflexotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1061-1064.
[n] M. Pekeler, S. Bauer, M. Peiniger, P. vomStein, and H. Vogel, “SRF activities at ACCEL instruments”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP52, pp. XX-XX.
[n] M. Attal et al., “Commissioning of SESAME Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2694-2696. doi:10.18429/JACoW-IPAC2017-WEPAB050
[n] W. Diete, B. Griep, M. Peiniger, P. vom Stein, H. Vogel, and W. Braeutigam, “A Superconducting Accelerating Test Module for the European Spallation Neutron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP124, pp. 957-958.
[n] M. B?Âge, J. Chrin, M. Mu??oz, and A. Streun, “Development of Beam Dynamics Applications within a CORBA Framework at the SLS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP7B10, pp. 1354-1356.
[n] M. Mu??oz, D. Einfeld, and Z. Mart?¡, “Effect of the Measured Magnetic Multipoles in the ALBA Lattice”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP070, pp. 3868-3870.
[n] L. N. P. Vilela, R. Basilio, J. F. Citadini, J. R. Furaer, and F. Rodrigues, “Advances in the Sirius Delta-Type Undulator Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1491-1493. doi:10.18429/JACoW-IPAC2018-TUPMK003
[n] D. S. Robin and B. Feinberg, “Status and Development of the ALS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH076, pp. 2629-2631.
[n] I. Hwang et al., “Coupling Diagnostics and Control at PLS Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE011, pp. 4533-4535.
[n] H. Zhang, C. Britton, G. Cubbon, C. Finlay, E. Matias, and R. Tanner, “CLS LINAC Safety System Upgrade”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL010, pp. 144-146.
[n] A. Akiyama et al., “An Experience on Fixing Problems with VMEbus Modules”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP048, pp. XX-XX.
[n] M. Perpeet et al., “Transport Properties of Polycrystalline NbB3Sn Films on Sapphire Substances”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D16, pp. 934-940.
[n] Z. Mart?¡, G. Benedetti, D. Einfeld, and M. Mu??oz, “Effect of the Phase One Insertion Devices in the ALBA Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE076, pp. 4695-4697.
[n] R. Kinjo et al., “A Bulk High-Tc Superconductor Staggered Array Undulator”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper THAAU03, pp. 473-476.
[n] F. J. Bermejo, I. Bustinduy, and J. Lucas, “Baseline Design for the ESS-Bilbao Superconducting Proton Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP082, pp. 1482-1484.
[n] P. Owusu, S. Karkare, J. Knefel, and J. Mama, “Growth and Evaluation of High QE Semiconductor Photocathodes for High-Brightness Electron Sources”, presented at the IPAC'26, Deauville, France, May 2026, paper THP3326, unpublished.
[n] E. D. Matias et al., “Phase II and III The Next Generation of CLS Beamline Control and Data Acquisition Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU013, pp. 454-457.
[n] M. R. Shubaly and J. G. Plato, “A Multi-Channel Fibre-Optic Link for Analog Telemtry”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2296-2299.
[n] E. Huttel, I. A. Abid, and S. Kh. Jafar, “The Pulsed Power Supplies of the SESAME Booster and Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3415-3417. doi:10.18429/JACoW-IPAC2017-WEPVA064
[n] I. Bustinduy, F. J. Bermejo, R. Enparantza, V. Etxebarria, J. Lucas, and L. Uriarte, “A Superconducting Proton Linac for the ESS-Bilbao Accelerator”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGD17, pp. 385-387.
[n] N. A. Ebrahim et al., “First Observations of Acceleration of Injected Electrons in a Laser Plasma Beatwave Experiment”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-44, pp. 553-556.
[n] G. Wright and M. Bree, “Status Monitoring of the EPICS Control System at the Canadian Light Source”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 667-668. doi:10.18429/JACoW-ICALEPCS2015-WEM304
[n] G. Wright and R. Igarashi, “EPICS Data Acquisition Software at the CLS”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL009, pp. 142-143.
[n] Y. Shoji, S. H. Hisao, and T. Matsubara, “Quasi-isochronus Operation at NewSUBARU”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF037, pp. 2356-2358.
[n] C. Piel et al., “Commissioning of the Australian Synchrotron Injector RF Systems”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS012, pp. 3293-3295.
[n] M. B. Chen, W. Z. Guo, D. M. Li, and S. M. Xu, “Some Peculiar Features of a Mini-Cyclotron as a Mass Spectrometer for Dating”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper K-18, pp. 660-663.
[n] M. R. Shubaly, “A Study of a Cusp-Enhanced Duopigatron Ion Source”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0041, pp. 443-445.
[n] H. H. Li, Q. Gu, D. M. Li, L. G. Liu, D. Wang, and Z. T. Zhao, “Commissioning of the SSRF Booster”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC040, pp. 2073-2075.
[n] D. L. Hall, D. Gonnella, M. Liepe, V. M. Arrieta, and S. R. McNeal, “Quality Factor Measurements of the Ultramet 3 GHz Cavity Constructed Using Chemical Vapour Deposition”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP072, pp. 607-610.
[n] M. Apollonio et al., “Beam dynamics studies for the Max 4U lattices”, presented at the IPAC'26, Deauville, France, May 2026, paper THP2115, unpublished.
[n] M. R. Shubaly, R. W. Hamm, and R. A. Judd, “Beam, An Improved Beam Extraction and Acceleration Modeling Code”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2655-2658.
[n] M. Ge et al., “CVD Coated Copper Substrate SRF Cavity Research at Cornell University”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 381-386. doi:10.18429/JACoW-SRF2019-TUFUB8
[n] M. Mu??oz, “Experience with the SLS Booster”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI098, pp. 602-604.
[n] H. Tsutsui et al., “Design Study of a Superconducting AVF Cyclotron for Proton Therapy”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MO3PB02, pp. 102-104.
[n] L. Pr?ªstegaard et al., “Status of the Canadian Light Source Booster Synchrotron”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI095, pp. 611-613.
[n] S. Di Mitri, L. G. Liu, and L. Tosi, “Frequency Map Analysis with the Insertion Devices at ELETTRA”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT091, pp. 2062-2064.
[n] O. Actis, D. Meer, C. Bula, and A. Mayor, “Calibration assessment of the PSI proton therapy Gantry 2 scanning system after 10 years of operation”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5067-5070. doi:10.18429/JACoW-IPAC2023-THPM082
[n] M. R. Shubaly, R. W. Davis, and J. G. Plato, “A Low Cost Modular Control and Instrumentation System for Accelerators”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0022, pp. 148-149.
[n] K. Dunkel, C. Piel, and H. Vogel, “100 MeV Pre-Injector for 3rd Generation Synchrotron Light Sources”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP14017, pp. XX-XX.
[n] S. LIU, S. Jiang, W. Qin, X. Li, and X. Liu, “Analysis of beam loading effect of dark current in C-band photocathode electron gun”, presented at the IPAC'26, Deauville, France, May 2026, paper TUP2697, unpublished.
[n] Y. Shoji, Y. Hisaoka, T. Matsubara, and T. Mitsui, “Longitudinal Coherent Oscillation Induced in Quasi-isochronous Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH023, pp. 1972-1974.
[n] N. A. Simonson, M. J. Boland, and Y. Yousefi Sigari, “X-Ray Double Slit Interferometer Progress at CLS”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4349-4351. doi:10.18429/JACoW-IPAC2021-THPAB276
[n] M. C. Rocha et al., “High Rigidity Girder System for the Sirius Machine”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 261-263. doi:10.18429/JACoW-MEDSI2018-WEPH26
[n] L. R. Elias, D. Anderson, A. L. Centore, I. Kimel, D. J. Larson, and M. Tecimer, “CFEL-I:A Compact Free Electron Laser”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2757-2760.
[n] R. M. Hutcheon, J. C. Brown, L. D. Hansborough, S. O. Schriber, and R. B. Turner, “100% Duty Factor RFQ Linac Systems at CRNL”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3557-3560.
[n] S. Hansen, K. N. Henrichsen, and M. de Jong, “Extension of the CERN ISR Energy by Acceleration of Stacked Beams”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 805-807.
[n] I. Bustinduy et al., “First LEBT Simulations for the Bilbao Accelerator Ion Source Test Stand”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper THO1B05, pp. 595-599.
[n] R. Junqueira Le?úo, H. Geraissate Paranhos de Oliveira, F. Rodrigues, G. R. Rovigatti de Oliveira, and U. R. Sposito, “Sirius Pre-alignment Results”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4106-4108. doi:10.18429/JACoW-IPAC2019-THPTS002
[n] A. Nagler et al., “Status of the SARAF Project”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper MOP054, pp. 168-170.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Li, J. V. Conway, X. Liu, and M. A. Palmer, “Electron Cloud Diagnostic Chambers with Various EC-suppression Coatings”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI088, pp. 3496-3498.
- L. Liu et al., “Status of Sirius – a New Brazilian Synchrotron Light Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUODA02, pp. 931-933.
- F. H. de S?í, H. O. C. Duarte, L. Liu, N. Milas, and X. R. Resende, “Study of Collective Beam Instabilities for Sirius”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1653-1655.
- L. Liu, X. R. Resende, A. R. D. Rodrigues, and F. H. de S?í, “A New Booster Synchrotron for the Sirius Project”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1959-1961.
- G. X. Xia, B. C. Jiang, and L. G. Liu, “Simulation of the Fast Ion Instability in SSRF Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD030, pp. 1991-1993.
- J. Y. Liu et al., “Coherent Harmonic Generation Experiment on Hefei Synchrotron Radiation Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB072, pp. 968-970.
- M. Pekeler et al., “Industrial Production of Turn Key Superconducting Accelerator Modules for High Current Storage Rings”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH166, pp. 1172-1174.
- G. Benedetti, D. Einfeld, Z. Mart?¡, and M. Mu??oz, “Beam Optics Measurements During the Commissioning of the ALBA Booster”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA056, pp. 2612-2614.
- R. D. Kephart, J. E. Anderson, C. A. Cooper, S. Henderson, and C. W. Schmidt, “The Illinois Accelerator Research Center”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEZB1, pp. 765-769.
- J. Feuchtwanger et al., “Status of the Ion Sources at ESS-Bilbao”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC030, pp. 1227-1229.
- V. M. Arrieta and S. R. McNeal, “Economical Manufacture of Seamless High-Purity Niobium”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO065, pp. 555-557.
- T. Yanagisawa, H. Hara, K. Kanaoka, K. Okihira, and K. Sennyu, “Development for Mass Production of Superconducting Cavity by MHI”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2876-2878.
- J. R. Roensch et al., “Investigations of the Longitudinal Phase Space at PITZ”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS103, pp. 3517-3519.
- L. G. Liu, “Linear Optics Calibrations for the SSRF Storage Ring Based on COD”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP028, pp. 4366-4368.
- H. W. Zhao et al., “An Advanced Superconducting Ecr Ion Source Secral At Imp: First Results And Operation At 18 GHz”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 271-276.
- J. J. Back et al., “Commissioning of the Low Energy Beam Transport of the Front End Test Stand”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC078, pp. 648-650.
- E. Bravin et al., “Beam Instrumentation for the HIE-ISOLDE Linac at CERN”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR048, pp. 891-893.
- R. B. Turner and J. Ungrin, “Brazing Techniques and Alloys for Accelerator RF Components”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B15, pp. 77-79.
- H. Mizuno et al., “RF High Power Tests of the X-Band Windows in the TWR”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-43, pp. 466-468.
- M. de Jong, “Overview of New Light Sources”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOPA002, pp. 220-223.
- J. V. Conway, Y. Li, and M. A. Palmer, “The Conceptual Design of a Vacuum System for the ILC Damping Rings Incorporating Electron Cloud Mitigation Techniques”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR062, pp. 1960-1962.
- R. Enparantza, F. J. Bermejo, J. Lucas, and L. Uriarte, “Baseline Design of the ESS Bilbao Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP080, pp. 2704-2706.
- Z. W. Li, M. Breese, E. P. Chew, C. Diao, M. Hua, and A. W. Wong, “A Review of 14 Years of Operation of Helios2 at SSLS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA054, pp. 199-201.
- Y. Yousefi Sigari, D. Bertwistle, and M. J. Boland, “Vertical Phase Space Measurement Progress at Canadian Light Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 963-965.
- M. R. Shubaly, “Ion Source Development and Injector Design for ZEBRA”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper G204, pp. 251-253.
- M. Peiniger, C. Piel, H. Vogel, and P. vom Stein, “A 100 MeV Injector Linac for the Swiss Light Source Supplied by Industry”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA56, pp. 3510-3512.
- X. He, B. Deng, J. Lei, C. Meng, and S. Pei, “Development of Flexible Waveguide for High Power High Vacuum Applications in S-band”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2909-2911.
- M. P. Cox, S. Bryan, B. F. Macdonald, and H. S. Shiers, “Vacuum Performance of the Diamond Light Source In-vacuum Insertion Devices”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC007, pp. 1995-1997.
- M. Pekeler et al., “Fabrication, Test and First Operation of Superconducting Accelerator Modules for Storage Rings”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB090, pp. 1410-1412.
- R. Tanner, S. Hu, G. Wright, and E. D. Matias, “Integrating Siemens PLCs and EPICS over Ethernet at the Canadian Light Source”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO001, pp. 31-33.
- L. Muguira et al., “Automatic Tuner Unit Design, Simulation and Measurement for Automatic Operation of the RF System in the ESS-Bilbao H+ Ion Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS023, pp. 3469-3471.
- M. Korostelev, A. F. Grant, J. Lucas, O. B. Malyshev, and A. Wolski, “Beam Coupling Impedance in the ILC Damping Rings”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP056, pp. 670-672.
- M. Pekeler, S. Bauer, B. Griep, C. Piel, H. Vogel, and P. vom Stein, “Series Production of Accelerator Cavities for the Spallation Neutron Source”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO008, pp. 2694-2696.
- J. Wang, I. A. Abid, R. T. Keane, and G. S. Sprau, “Preliminary Designs and Test Results of Bipolar Power Supplies for APS Upgrade Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2381-2383.
- M. Attal et al., “Commissioning of SESAME Booster”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2880-2882.
- S. Varnasseri et al., “Design and Fabrication of the Stripline BPM at ESS-Bilbao”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPA31, pp. 122-124.
- G. Wright et al., “Recent Changes to Beamline Software at the Canadian Light Source”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC100, pp. 813-815.
- G. Benedetti, D. Einfeld, J. Marcos, M. Mu??oz, and M. Pont, “ALBA Booster Settings for an Optimized Performance”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP027, pp. 3756-3758.
- L. Dallin, I. Blomqvist, D. Lowe, M. Silzer, and M. de Jong, “The Canadian Light Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOPA001, pp. 220-223.
- P. vom Stein, M. Peiniger, M. Pekeler, C. Piel, and H. Vogel, “RF Activities on Cavities and Turn Key Accelerator Systems at ACCEL”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH092, pp. 984-986.
- J. Lei et al., “RF Study And Cold Test of an S-band Spherical Cavity Pulse Compressor”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2429-2431.
- A. S. Setty et al., “Commissioning of the 100 MeV Preinjector for the ALBA Synchrotron”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP088, pp. 4984-4986.
- F. Sanchez Galan et al., “Optimising Machine-Experiment Interventions in HL-LHC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3540-3543.
- B. G?Ñlnander et al., “Status of Design Work Towards an Electron Cooler for HESR”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper THAP10, pp. 182-186.
- Y. Kitagawa et al., “Inverse Compton Scattering by Laser Accelerated Electrons and its Application to Standoff Detection of Hidden Objects”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD054, pp. 4404-4406.
- S. O. Schriber, L. W. Funk, S. B. Hodge, and R. M. Hutcheon, “Experimental Measurements on a 25 MeV Reflexotron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1061-1064.
- M. Pekeler, S. Bauer, M. Peiniger, P. vomStein, and H. Vogel, “SRF activities at ACCEL instruments”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP52, pp. XX-XX.
- M. Attal et al., “Commissioning of SESAME Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2694-2696.
- W. Diete, B. Griep, M. Peiniger, P. vom Stein, H. Vogel, and W. Braeutigam, “A Superconducting Accelerating Test Module for the European Spallation Neutron Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP124, pp. 957-958.
- M. B?Âge, J. Chrin, M. Mu??oz, and A. Streun, “Development of Beam Dynamics Applications within a CORBA Framework at the SLS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP7B10, pp. 1354-1356.
- M. Mu??oz, D. Einfeld, and Z. Mart?¡, “Effect of the Measured Magnetic Multipoles in the ALBA Lattice”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP070, pp. 3868-3870.
- L. N. P. Vilela, R. Basilio, J. F. Citadini, J. R. Furaer, and F. Rodrigues, “Advances in the Sirius Delta-Type Undulator Project”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1491-1493.
- D. S. Robin and B. Feinberg, “Status and Development of the ALS”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH076, pp. 2629-2631.
- I. Hwang et al., “Coupling Diagnostics and Control at PLS Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE011, pp. 4533-4535.
- H. Zhang, C. Britton, G. Cubbon, C. Finlay, E. Matias, and R. Tanner, “CLS LINAC Safety System Upgrade”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL010, pp. 144-146.
- A. Akiyama et al., “An Experience on Fixing Problems with VMEbus Modules”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP048, pp. XX-XX.
- M. Perpeet et al., “Transport Properties of Polycrystalline NbB3Sn Films on Sapphire Substances”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D16, pp. 934-940.
- Z. Mart?¡, G. Benedetti, D. Einfeld, and M. Mu??oz, “Effect of the Phase One Insertion Devices in the ALBA Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE076, pp. 4695-4697.
- R. Kinjo et al., “A Bulk High-Tc Superconductor Staggered Array Undulator”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper THAAU03, pp. 473-476.
- F. J. Bermejo, I. Bustinduy, and J. Lucas, “Baseline Design for the ESS-Bilbao Superconducting Proton Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP082, pp. 1482-1484.
- P. Owusu, S. Karkare, J. Knefel, and J. Mama, “Growth and Evaluation of High QE Semiconductor Photocathodes for High-Brightness Electron Sources”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP3326, this conference.
- E. D. Matias et al., “Phase II and III The Next Generation of CLS Beamline Control and Data Acquisition Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMU013, pp. 454-457.
- M. R. Shubaly and J. G. Plato, “A Multi-Channel Fibre-Optic Link for Analog Telemtry”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2296-2299.
- E. Huttel, I. A. Abid, and S. Kh. Jafar, “The Pulsed Power Supplies of the SESAME Booster and Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3415-3417.
- I. Bustinduy, F. J. Bermejo, R. Enparantza, V. Etxebarria, J. Lucas, and L. Uriarte, “A Superconducting Proton Linac for the ESS-Bilbao Accelerator”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGD17, pp. 385-387.
- N. A. Ebrahim et al., “First Observations of Acceleration of Injected Electrons in a Laser Plasma Beatwave Experiment”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-44, pp. 553-556.
- G. Wright and M. Bree, “Status Monitoring of the EPICS Control System at the Canadian Light Source”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 667-668.
- G. Wright and R. Igarashi, “EPICS Data Acquisition Software at the CLS”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL009, pp. 142-143.
- Y. Shoji, S. H. Hisao, and T. Matsubara, “Quasi-isochronus Operation at NewSUBARU”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF037, pp. 2356-2358.
- C. Piel et al., “Commissioning of the Australian Synchrotron Injector RF Systems”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS012, pp. 3293-3295.
- M. B. Chen, W. Z. Guo, D. M. Li, and S. M. Xu, “Some Peculiar Features of a Mini-Cyclotron as a Mass Spectrometer for Dating”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper K-18, pp. 660-663.
- M. R. Shubaly, “A Study of a Cusp-Enhanced Duopigatron Ion Source”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper THP0041, pp. 443-445.
- H. H. Li, Q. Gu, D. M. Li, L. G. Liu, D. Wang, and Z. T. Zhao, “Commissioning of the SSRF Booster”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC040, pp. 2073-2075.
- D. L. Hall, D. Gonnella, M. Liepe, V. M. Arrieta, and S. R. McNeal, “Quality Factor Measurements of the Ultramet 3 GHz Cavity Constructed Using Chemical Vapour Deposition”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP072, pp. 607-610.
- M. Apollonio et al., “Beam dynamics studies for the Max 4U lattices”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP2115, this conference.
- M. R. Shubaly, R. W. Hamm, and R. A. Judd, “Beam, An Improved Beam Extraction and Acceleration Modeling Code”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2655-2658.
- M. Ge et al., “CVD Coated Copper Substrate SRF Cavity Research at Cornell University”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 381-386.
- M. Mu??oz, “Experience with the SLS Booster”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI098, pp. 602-604.
- H. Tsutsui et al., “Design Study of a Superconducting AVF Cyclotron for Proton Therapy”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MO3PB02, pp. 102-104.
- L. Pr?ªstegaard et al., “Status of the Canadian Light Source Booster Synchrotron”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI095, pp. 611-613.
- S. Di Mitri, L. G. Liu, and L. Tosi, “Frequency Map Analysis with the Insertion Devices at ELETTRA”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT091, pp. 2062-2064.
- O. Actis, D. Meer, C. Bula, and A. Mayor, “Calibration assessment of the PSI proton therapy Gantry 2 scanning system after 10 years of operation”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM082, pp. 5067-5070.
- M. R. Shubaly, R. W. Davis, and J. G. Plato, “A Low Cost Modular Control and Instrumentation System for Accelerators”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0022, pp. 148-149.
- K. Dunkel, C. Piel, and H. Vogel, “100 MeV Pre-Injector for 3rd Generation Synchrotron Light Sources”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP14017, pp. XX-XX.
- S. LIU, S. Jiang, W. Qin, X. Li, and X. Liu, “Analysis of beam loading effect of dark current in C-band photocathode electron gun”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper TUP2697, this conference.
- Y. Shoji, Y. Hisaoka, T. Matsubara, and T. Mitsui, “Longitudinal Coherent Oscillation Induced in Quasi-isochronous Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH023, pp. 1972-1974.
- N. A. Simonson, M. J. Boland, and Y. Yousefi Sigari, “X-Ray Double Slit Interferometer Progress at CLS”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4349-4351.
- M. C. Rocha et al., “High Rigidity Girder System for the Sirius Machine”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 261-263.
- L. R. Elias, D. Anderson, A. L. Centore, I. Kimel, D. J. Larson, and M. Tecimer, “CFEL-I:A Compact Free Electron Laser”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2757-2760.
- R. M. Hutcheon, J. C. Brown, L. D. Hansborough, S. O. Schriber, and R. B. Turner, “100% Duty Factor RFQ Linac Systems at CRNL”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3557-3560.
- S. Hansen, K. N. Henrichsen, and M. de Jong, “Extension of the CERN ISR Energy by Acceleration of Stacked Beams”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 805-807.
- I. Bustinduy et al., “First LEBT Simulations for the Bilbao Accelerator Ion Source Test Stand”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper THO1B05, pp. 595-599.
- R. Junqueira Le?úo, H. Geraissate Paranhos de Oliveira, F. Rodrigues, G. R. Rovigatti de Oliveira, and U. R. Sposito, “Sirius Pre-alignment Results”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4106-4108.
- A. Nagler et al., “Status of the SARAF Project”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper MOP054, pp. 168-170.
Back to search