JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. Bai et al., “RHIC Vertical AC Dipole Commissioning”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE040, pp. 1115-1117. 
[n]	N. Orr et al., “On Line Isotopic Separator Test Benches at GANIL”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1792-1795. 
[n]	E. R. Beadle, “A 2 MHz 3-Port Analog Isolation and Fanout Module”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB08, pp. 2545-2547. 
[n]	A. Devred et al., “Time Decay Measurements of the Sextupole Component of the Magnetic Field in a 4-cm Aperture, 17-m-long SSC Dipole Magnet Prototype”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2480-2483. 
[n]	J. N. Weaver, J. Sebek, H. Morales, P. Golceff, and R. D. Genin, “Experience with a Radio Frequency Gun on the SSRL Injector Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3018-3021. 
[n]	R. Hettel et al., “Digital Orbit Feedback Control for SPEAR”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ22, pp. 2717-2719. 
[n]	T. J. Shea, M. C. Grau, P. R. Cameron, W. A. Ryan, and R. E. Sikora, “RHIC Beam Position Monitor Assemblies”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2328-2331. 
[n]	Y. K. Kim, “Towards the Globatron for Tomorrow”, presented at the IPAC'21, Campinas, Brazil, May 2021, paper TUXX02, unpublished. 
[n]	S. Y. Lee and J. M. Wang, “Microwave Instability Across the Transition Energy”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2323-2326. 
[n]	A. R. Bainbridge, A. G. Hinton, N. Krumpa, I. P. S. Martin, B. J. A. Shepherd, and W. Tizzano, “Construction and Measurement of a Tuneable Permanent Magnet Quadrupole for Diamond Light Source”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2424-2427. doi:10.18429/JACoW-IPAC2022-THOYSP1
[n]	M. Champion, T. Berenc, M. May, and J. Reid, “Design and Prototype Tests of a Large-Aperture 37-53 MHz Ferrite-Tuned Booster Synchrotron Cavity”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH045, pp. 870-872. 
[n]	G. R. Swain and A. A. Browman, “Proposed Bunching Scheme for a Polarized H - Injector”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3024-3027. 
[n]	J. B. Flanz and C. P. Sargent, “Simulations of Half- and Third-Interger Resonant Extraction from a One-GeV Pulse Stretcher Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2444-2447. 
[n]	C. Jamet et al., “Failure Mode and Effects Analysis of the Beam Intensity Control for the SPIRAL2 Accelerator”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF28, pp. 613-616. 
[n]	R. Miyamoto, M. Cattin, J. Serrano, and R. Tom?ís, “Signal Quality of the LHC AC Dipoles and its Impact on Beam Dynamics”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE083, pp. 4716-4718. 
[n]	M. Barnes et al., “Initial operational experience of an LHC injection kicker magnet upgraded for HL-LHC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1080-1083. doi:10.18429/JACoW-IPAC2024-TUPC36
[n]	J. J. Song et al., “LIGA-Fabrication of mm-Wave Accelerating Cavity Structures at the Advanced Photon Source (APS)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5B010, pp. 461-463. 
[n]	C. Pearson et al., “Development of Multimegawatt Klystrons for Linear Colliders”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1106-1109. 
[n]	A. Denker et al., “Status of the VE-RFQ Injector for the ISL Cyclotron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP20C, pp. 711-712. 
[n]	F. Hoguin, S. Deghaye, R. Gorbonosov, J. Lauener, and P. Mantion, “Distributed Transactions in CERNÔÇÖs Accelerator Control System”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 468-472. doi:10.18429/JACoW-ICALEPCS2021-TUPV033
[n]	P. Charrue and H. Schmickler, “The Status of the LHC Controls System Shortly Before Injection of Beam”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper MOAB01, pp. 5-9. 
[n]	J. Corbett, R. Hettel, D. Keeley, and D. Mostowfi, “Digital Orbit Feedback Compensation for SPEAR”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ21, pp. 2714-2716. 
[n]	R. N. Fernandes et al., “Cable Database at ESS”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1200. doi:10.18429/JACoW-ICALEPCS2019-WEPHA047
[n]	P. Anisimov, E. Simakov, H. Xu, J. Rosenzweig, J. Maxson, and M. Kaemingk, “Multi-objective genetic optimization of high charge TopGun photoinjector”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 840-843. doi:10.18429/JACoW-IPAC2024-MOPS55
[n]	H. Eickhoff et al., “The GSI Cancer Therapy Project”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9B008, pp. 3801-3803. 
[n]	A. Hinton et al., “Field measurements of a short period helical superconducting undulator”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1868-1871. doi:10.18429/JACoW-IPAC2025-WEPB057
[n]	A. Chabert et al., “Superconducting Booster Cyclotron Studies at GANIL”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2802-2805. 
[n]	J. Allinger et al., “A High Field Superconducting Beam Transport in a BNL Primary Proton Beam”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4053-4056. 
[n]	R. F. Lambiase, W. Buxton, B. Oerter, S. Peng, J. Pepe, and J. Smith, “Performance Results for the BNL PSI Designed for the SNS and it's Application to Other Accelerators”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE120, pp. 2493-2495. 
[n]	E. Bozoki, A. Friedman, and S. Ramamoorthy, “First Results with a Nonlinear Digital Orbit Feedback System at the NSLS”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ14, pp. 2696-2698. 
[n]	J. Kaugerts, P. F. Dahl, I. Polk, and W. Sampson, “ISABELLE Insertion Quadrupoles”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4036-4039. 
[n]	M. Boros, R. N. Fernandes, B. Peceli, and G. Singler, “An EPICS Channel Access Implementation on Siemens PLCs”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 649. doi:10.18429/JACoW-ICALEPCS2019-MOSH3001
[n]	D. Monteiro, R. Barillère, N. Bunijevac, and I. Rühl, “Controls Optimization for Energy Efficient Cooling and Ventilation at CERN”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1465-1469. doi:10.18429/JACoW-ICALEPCS2023-THPDP062
[n]	P. G. O'Shea et al., “Accelerator Archeology - The Resurrection of the Stanford MARKIII Electron Linac at Duke”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA17, pp. 1090-1092. 
[n]	I. Bekman et al., “Experience and Prospects of Real-Time Signal Processing and Representation for the Beam Diagnostics at COSY”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 970-972. doi:10.18429/JACoW-ICALEPCS2017-TUPHA213
[n]	C. Swain, ?û. Apsimon, A. Salehilashkajani, C. P. Welsch, J. Wolfenden, and H. D. Zhang, “A Modified Nomarski Interferometer to Study Supersonic Gas Jet Density Profiles”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 385-388. doi:10.18429/JACoW-IPAC2022-MOPOPT054
[n]	T. Overton, J. Jones, T. Pacey, L. Reid, and E. Snedden, “Simulation study of beam-driven plasma wakefield experiments on CLARA”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1353-1356. doi:10.18429/JACoW-IPAC2025-TUPM086
[n]	F. Éozénou et al., “Vertical Electro-Polishing of 704 MHz Resonators Using Ninja Cathode: Gradients Over 40 MV/m Achieved on ESS Single-Cell Cavity”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 844-847. doi:10.18429/JACoW-LINAC2022-THPOGE23
[n]	C. B?Âhme, A. J. Halama, V. Kamerdzhiev, and G. R. Rupsch, “Status Overview of the HESR Beam Instrumentation”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 23-27. doi:10.18429/JACoW-IBIC2022-MOP03
[n]	G. Torrisi et al., “Design and optimization of a C-band RF Pulse Compressor for a VHEE LINAC for FLASH Radiotherapy”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 465-467. doi:10.18429/JACoW-LINAC2024-TUPB069
[n]	V. Kamerdzhiev et al., “Concluding the operation and development of COSY”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1653-1656. doi:10.18429/JACoW-IPAC2024-TUPS10
[n]	L. Merminga and J. J. Bisognano, “Energy Stability in a High Average Power FEL”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ11, pp. 2690-2692. 
[n]	O. Napoly, P. Sievers, T. Taylor, and B. Zotter, “Progress on the CLIC Final Focus System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3228-3231. 
[n]	E. R. Beadle, “A General Purpose Fiber Optic Link with Radiation Resistance”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB09, pp. 2548-2550. 
[n]	R. N. Fernandes et al., “Management of IOCs at ESS”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1205. doi:10.18429/JACoW-ICALEPCS2019-WEPHA048
[n]	M. Mehler, O. Boine-Frankenheim, O. Chorniy, and O. K. Kester, “Longitudinal Dynamics of Intense Heavy-Ion Bunches in SIS-100”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR003, pp. 2937-2939. 
[n]	S. Y. Lee et al., “The RHIC Lattice”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 773-776. 
[n]	M. Ratzlaff and D. Beauregard, “Beam centroid studies at the Canadian Light Source”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1243-1245. doi:10.18429/JACoW-IPAC2024-TUPG14
[n]	J. C. Brunet et al., “Mechanical Design and Layout of the LHC Standard Half-Cell”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P013, pp. 3368-3370. 
[n]	C. Yao and Y.-C. Chae, “Electron Multipacting Observation and Simulation in the APS PAR”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS112, pp. 3541-3543. 
[n]	E. Colby, “A High Charge, High Duty Factor RF Photoinjector for the Next Generation Linear Collider”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH2006, pp. 758-764. 
[n]	L. Giuliano et al., “Design and test of C-band linac prototypes for electron flash radiotherapy”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 472-475. doi:10.18429/JACoW-LINAC2024-TUPB071
[n]	M. Steck, K. Beckert, P. Beller, B. Franczak, B. Franzke, and F. Nolden, “Improved Performance of the Heavy Ion Storage Ring ESR”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT016, pp. 1168-1170. 
[n]	V. Bailey, R. Curry, J. P. Lidestri, M. Tiefenback, and D. Wake, “Magnet Design for SLIA Proof-of-Concept Experiment”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3123-3126. 
[n]	J. Hetzel et al., “Final preparation of accelerated and polarised protons at COSY Jülich”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1657-1660. doi:10.18429/JACoW-IPAC2024-TUPS12
[n]	M. Veronese et al., “First Operation of the FERMI@Elettra Bunch Length Monitor System”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB41, pp. 486-489. 
[n]	O. Chubenko, “State-of-the-art photocathodes for bright-beam and spin-polarized-beam generation”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 5-9. doi:10.18429/JACoW-LINAC2024-MOZA002
[n]	C. W. Olson, J. M. Paterson, J.-L. Pellegrin, and J. R. Rees, “Operation of the PEP Transverse Beam Feedback”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2296-2299. 
[n]	F. Micolon et al., “Mechanical Consolidation of the LHC Inner Triplet Magnet Supporting System for Remote Alignment”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2207-2209. doi:10.18429/JACoW-IPAC2021-TUPAB308
[n]	M. Emamian, N. Hower, and Y. Levashov, “Alignment of Duke Free Electron Laser Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAA02, pp. 2081-2083. 
[n]	P. Lebrun and P. H. Garbincius, “Assessing Risk in Costing High-energy Accelerators: from Existing Projects to the Future Linear Collider”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE021, pp. 3392-3394. 
[n]	L. G. Ratner et al., “Commissioning the Polarized Beam in the AGS”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1656-1659. 
[n]	P. Bauer et al., “RRR Measurements on Niobium for Superconducting RF Cavities at Fermilab”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP01, pp. 588-590. 
[n]	F. Chautard et al., “GANIL Status Report”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT052, pp. 1270-1272. 
[n]	V. A. Pikalov et al., “First Results of Experiments with the Extracted Carbon Beam at the U-70 Accelerator”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB19, pp. 197-199. 
[n]	A. Blednykh et al., “Temperature Measurements of the NSLS-II Vacuum Components”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 443-445. doi:10.18429/JACoW-NAPAC2019-TUPLM36
[n]	M. Gonzalez-Berges, R. Barillere, and F. Bernard, “Frameworking A collaborative approach to control systems development”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_049. 
[n]	Y. Leng and L. Hoff, “Analog I/O Module Test System Based on EPICS CA Protocol and ActiveX CA Interface”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP529, pp. XX-XX. 
[n]	A. Bayramiyan, M. Akbari, M. Jafarzadeh, A. Khalilzadeh, J. Rahighi, and E. H. Yousefi, “Conceptual Design of Power Supply Control System for ILSF”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1734-1735. doi:10.18429/JACoW-ICALEPCS2017-THPHA148
[n]	G. Busatto, C. Abbate, F. Bedeschi, F. Iannuzzo, C. E. Pagliarone, and G. M. Piacentino, “Comparison among Eligible Topologies for Marx Klystron Modulators”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD079, pp. 3284-3286. 
[n]	Y. Jongen et al., “The Proton Therapy System for MGH's NPTC: Equipment Description and Progress Report”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper L-03, pp. 606-609. 
[n]	J. J. Knopp, M. V. Fisher, Z. Liu, J. Maser, R. Reininger, and X. Shi, “Thermal Analysis of High Heat Load Mirrors for the in-Situ Nanoprobe Beamline of the APS Upgrade”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 238-240. doi:10.18429/JACoW-MEDSI2018-WEPH16
[n]	P. Zhang, G. J. Rosaz, A. Sublet, M. Therasse, and W. Venturini Delsolaro, “The Influence of Cooldown Conditions at Transition Temperature on the Quality Factor of Niobium Sputtered Quarter-Wave Resonators for HIE-ISOLDE”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB077, pp. 765-769. 
[n]	G. J. Waldschmidt, M. Abliz, T. G. Berenc, D. Horan, and U. Wienands, “Dynamic Tuning of the APS-U Booster 5-cell Cavities”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1251-1253. doi:10.18429/JACoW-IPAC2018-TUPMF003
[n]	C. S. Gallo, A. Galat?â, D. Mascali, and G. Torrisi, “A Possible Optimization of Electron Cyclotron Resonance Ion Sources Plasma Chambers”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 67-70. doi:10.18429/JACoW-ECRIS2018-TUB3
[n]	J.-L. Pellegrin and H. Schwarz, “Control Electronics of the PEP RF System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2320-2323. 
[n]	P. Michelato, S. Pace, M. Re, and P. Sarta, “Operational Experience of the K800 Cyclotron Vacuum System at L.N. S.”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2476-2479. 
[n]	G. P. Boicourt, O. R. Sander, and T. P. Wangler, “Comparison of Simulation with Experiment in an RFQ”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2562-2565. 
[n]	P. Lebrun, “Collaborating with Industry: Lessons from the LHC Megaproject”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEIM02, pp. 1963-1963. 
[n]	N. Steinhau-K??hl et al., “Basic Studies for the Electro Polishing Facility at DESY”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PZ003, pp. XX-XX. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search